The C and C++ semantics for compare_exchange require it to return a bool
indicating success. This gets mapped to LLVM IR which follows each cmpxchg with
an icmp of the value loaded against the desired value.
When lowered to ldxr/stxr loops, this extra comparison is redundant: its
results are implicit in the control-flow of the function.
This commit makes two changes: it replaces that icmp with appropriate PHI
nodes, and then makes sure earlyCSE is called after expansion to actually make
use of the opportunities revealed.
I've also added -{arm,aarch64}-enable-atomic-tidy options, so that
existing fragile tests aren't perturbed too much by the change. Many
of them either rely on undef/unreachable too pervasively to be
restored to something well-defined (particularly while making sure
they test the same obscure assert from many years ago), or depend on a
particular CFG shape, which is disrupted by SimplifyCFG.
rdar://problem/16227836
llvm-svn: 209883
The corresponding CFE patch replaces these intrinsics with vector initializers
in avxintrin.h. This patch removes the LLVM intrinsics from the backend.
We now stop lowering at X86ISD::VBROADCAST custom node rather than lowering
that further to the intrinsics.
The patch only changes VBROADCASTS* and leaves VBROADCAST[FI]128 to continue
to use intrinsics. As explained in the CFE patch, the reason is that we
currently don't generate as good code for them without the intrinsics.
CodeGen/X86/avx-vbroadcast.ll already provides coverage for this change. It
checks that for a series of insertelements we generate the appropriate
vbroadcast instruction.
Also verified that there was no assembly change in the test-suite before and
after this patch.
llvm-svn: 209864
These tests ensure that a change I will propose in clang works as
expected.
Summary:
Added tests for the generation of blend+immediate instructions from a
shufflevector.
These tests were proposed along with a patch that was dropped. I'm
committing the tests anyway to protect against possible regressions in
codegen.
Reviewers: nadav, bkramer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3600
llvm-svn: 209853
This seems to match what gcc does for ppc and what every other llvm
backend does.
This is a fixed version of r209638. The difference is to avoid any change
in behavior for functions. The logic for using constant pools for function
addresseses is spread over a few places and we have to keep them in sync.
llvm-svn: 209821
An address only use of an extract element of a load can be simplified to a
load. Without this the result of the extract element is spilled to the
stack so that an address is available.
llvm-svn: 209788
This matches gcc's behavior. It also seems natural given that aliases
contain other properties that govern how it is accessed (linkage,
visibility, dll storage).
Clang still has to be updated to expose this feature to C.
llvm-svn: 209759
This reverts r208640 (I've just XFAILed the test) because it broke ppc64/Linux
self-hosting. Because nearly every regression test triggers a segfault, I hope
this will be easy to fix.
llvm-svn: 209747
This reverts commit r209638 because it broke self-hosting on ppc64/Linux. (the
Clang-compiled TableGen would segfault because it jumped to an invalid address
from within _ZNK4llvm17ManagedStaticBase21RegisterManagedStaticEPFPvvEPFvS1_E
(which is within the command-line parameter registration process)).
llvm-svn: 209745
Add regression tests for the following transformation:
str X, [x20]
...
add x20, x20, #32
->
str X, [x20], #32
with X being either w0, x0, s0, d0 or q0.
llvm-svn: 209715
Add regression tests for the following transformation:
ldr X, [x20]
...
add x20, x20, #32
->
ldr X, [x20], #32
with X being either w0, x0, s0, d0 or q0.
llvm-svn: 209711
%higher and %highest can have non-zero values only for offsets greater
than 2GB, which is highly unlikely, if not impossible when compiling a
single function. This makes long branch for MIPS64 3 instructions smaller.
Differential Revision: http://llvm-reviews.chandlerc.com/D3281.diff
llvm-svn: 209678
In PPCISelLowering.cpp: PPCTargetLowering::LowerBUILD_VECTOR(), there
is an optimization for certain patterns to generate one or two vector
splats followed by a vector add or subtract. This operation is
represented by a VADD_SPLAT in the selection DAG. Prior to this
patch, it was possible for the VADD_SPLAT to be assigned the wrong
data type, causing incorrect code generation. This patch corrects the
problem.
Specifically, the code previously assigned the value type of the
BUILD_VECTOR node to the newly generated VADD_SPLAT node. This is
correct much of the time, but not always. The problem is that the
call to isConstantSplat() may return a SplatBitSize that is not the
same as the number of bits in the original element vector type. The
correct type to assign is a vector type with the same element bit size
as SplatBitSize.
The included test case shows an example of this, where the
BUILD_VECTOR node has a type of v16i8. The vector to be built is {0,
16, 0, 16, 0, 16, 0, 16, 0, 16, 0, 16, 0, 16, 0, 16}. isConstantSplat
detects that we can generate a splat of 16 for type v8i16, which is
the type we must assign to the VADD_SPLAT node. If we do not, we
generate a vspltisb of 8 and a vaddubm, which generates the incorrect
result {16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16,
16}. The correct code generation is a vspltish of 8 and a vadduhm.
This patch also corrected code generation for
CodeGen/PowerPC/2008-07-10-SplatMiscompile.ll, which had been marked
as an XFAIL, so we can remove the XFAIL from the test case.
llvm-svn: 209662
Cortex-M4 only has single-precision floating point support, so any LLVM
"double" type will have been split into 2 i32s by now. Fortunately, the
consecutive-register framework turns out to be precisely what's needed to
reconstruct the double and follow AAPCS-VFP correctly!
rdar://problem/17012966
llvm-svn: 209650
Summary:
Implemented an InstCombine transformation that takes a blendv* intrinsic
call and translates it into an IR select, if the mask is constant.
This will eventually get lowered into blends with immediates if possible,
or pblendvb (with an option to further optimize if we can transform the
pblendvb into a blend+immediate instruction, depending on the selector).
It will also enable optimizations by the IR passes, which give up on
sight of the intrinsic.
Both the transformation and the lowering of its result to asm got shiny
new tests.
The transformation is a bit convoluted because of blendvp[sd]'s
definition:
Its mask is a floating point value! This forces us to convert it and get
the highest bit. I suppose this happened because the mask has type
__m128 in Intel's intrinsic and v4sf (for blendps) in gcc's builtin.
I will send an email to llvm-dev to discuss if we want to change this or
not.
Reviewers: grosbach, delena, nadav
Differential Revision: http://reviews.llvm.org/D3859
llvm-svn: 209643
This commit is debatable. There are two possible approaches, neither
of which is really satisfactory:
1. Use "@foo(i1 zeroext)" to mean an extension to 32-bits on Darwin,
and 8 bits otherwise.
2. Redefine "@foo(i1)" to mean that the i1 is extended by the caller
to 8 bits. This goes against the spirit of "zeroext" I think, but
it's a bit of a vague construct anyway (by definition you're going
to extend to the amount required by the ABI, that's why it's the
ABI!).
This implements option 2. The DAG machinery really isn't setup for the
first (there's a fairly strong assumption that "zeroext" goes to at
least the smallest register size), and even if it was the resulting
DAG looks like it would be inferior in many cases.
Theoretically we could add AssertZext nodes in the consumers of
ABI-passed values too now, but this actually seems to make the code
worse in practice by making truncation proceed in two steps. The code
produced is equally valid if we continue to assume only the low bit is
defined.
Should fix PR19850
llvm-svn: 209637
We can eliminate the custom C++ code in favour of some TableGen to
check the same things. Functionality should be identical, except for a
buffer overrun that was present in the C++ code and meant webkit
failed if any small argument needed to be passed on the stack.
llvm-svn: 209636
Add tests for the following transform:
str X, [x0, #32]
...
add x0, x0, #32
->
str X, [x0, #32]!
with X being either w1, x1, s0, d0 or q0.
llvm-svn: 209627
We have a couple of regression tests for load/store pairing, but (to my knowledge) there are no regression tests for the load/store + add/sub folding.
As a first step towards increased test coverage of this area, this commit adds a test for one instance of a load + add to pre-indexed load transformation.
llvm-svn: 209618
Currently we look at the Aliasee to decide what type of export
directive to use. It seems better to use the type of the alias
directly. This is similar to how we handle the alias having the
same address but other attributes (linkage, visibility) from the
aliasee.
With this patch it is now possible to do things like
target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-pc-windows-msvc"
@foo = global [6 x i8] c"\B8*\00\00\00\C3", section ".text", align 16
@f = dllexport alias i32 (), [6 x i8]* @foo
!llvm.module.flags = !{!0}
!0 = metadata !{i32 6, metadata !"Linker Options", metadata !1}
!1 = metadata !{metadata !2, metadata !3}
!2 = metadata !{metadata !"/DEFAULTLIB:libcmt.lib"}
!3 = metadata !{metadata !"/DEFAULTLIB:oldnames.lib"}
llvm-svn: 209600
This commit starts with a "git mv ARM64 AArch64" and continues out
from there, renaming the C++ classes, intrinsics, and other
target-local objects for consistency.
"ARM64" test directories are also moved, and tests that began their
life in ARM64 use an arm64 triple, those from AArch64 use an aarch64
triple. Both should be equivalent though.
This finishes the AArch64 merge, and everyone should feel free to
continue committing as normal now.
llvm-svn: 209577
I'm doing this in two phases for a better "git blame" record. This
commit removes the previous AArch64 backend and redirects all
functionality to ARM64. It also deduplicates test-lines and removes
orphaned AArch64 tests.
The next step will be "git mv ARM64 AArch64" and rewire most of the
tests.
Hopefully LLVM is still functional, though it would be even better if
no-one ever had to care because the rename happens straight
afterwards.
llvm-svn: 209576
After the load/store refactoring, we were sometimes trying to feed a
GPR64 into a 32-bit register offset operand. This failed in
copyPhysReg.
llvm-svn: 209566
This matches both what we do for the non-thread case and what gcc does.
With this patch clang would match gcc's behaviour in
static __thread int a = 42;
extern __thread int b __attribute__((alias("a")));
int *f(void) { return &a; }
int *g(void) { return &b; }
if not for pr19843. Manually writing the IL does produce the same access modes.
It is also a step in the direction of fixing pr19844.
llvm-svn: 209543
Summary:
Instead the system is required to provide some means of handling unaligned
load/store without special instructions. Options include full hardware
support, full trap-and-emulate, and hybrids such as hardware support within
a cache line and trap-and-emulate for multi-line accesses.
MipsSETargetLowering::allowsUnalignedMemoryAccesses() has been configured to
assume that unaligned accesses are 'fast' on the basis that I expect few
hardware implementations will opt for pure-software handling of unaligned
accesses. The ones that do handle it purely in software can override this.
mips64-load-store-left-right.ll has been merged into load-store-left-right.ll
The stricter testing revealed a Bits!=Bytes bug in passByValArg(). This has
been fixed and the variables renamed to clarify the units they hold.
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3872
llvm-svn: 209512
Tim Northover