We do this by delegating to two available Watchpoint Register Pairs (wvr, wcr). With
each pair handling the 4 bytes of (uint64_t)variable.
llvm-svn: 153300
that the inferior cannot execute past the watchpoint-triggering instruction.
The solution is disable the watchpoint before resuming the inferior and make it hardware single step;
when the inferior stops again due to single step, re-enable the watchpoint and disable the single step
to make the inferior able to continue again without obstacle.
rdar://problem/9667960
llvm-svn: 153273
However, the debugserver cannot get past the instruction which triggered the watchpoint.
So a workaround is in place for the time being which disables the triggered watchpoint
before resuming.
Lots of commented out printf's remain in the source which needs to be cleaned up.
WIP rdar://problem/9667960
llvm-svn: 153228
On darwin, if child process of process being debugged dies due to mach exception, the debugged process will die.
debugserver now only handles the mach exceptions for the task being debugged.
llvm-svn: 152291
Fixed STDERR to not be opened as readable. Also cleaned up some of the code that implemented the file actions as some of the code was using the wrong variables, they now use the right ones (in for stdin, out for stdout, err for stderr).
llvm-svn: 152102
"desktop" - build all binaries with XPC
"desktop_no_xcp" - build all binaries with none of the XPC binaries
"ios" - build all binaries with special iOS install settings.
Bumped the Xcode project build version for lldb-118 and debugserver-169.
llvm-svn: 151740
the lldb_private::StackFrame objects hold onto a weak pointer to the thread
object. The lldb_private::StackFrame objects the the most volatile objects
we have as when we are doing single stepping, frames can often get lost or
thrown away, only to be re-created as another object that still refers to the
same frame. We have another bug tracking that. But we need to be able to
have frames no longer be able to get the thread when they are not part of
a thread anymore, and this is the first step (this fix makes that possible
but doesn't implement it yet).
Also changed lldb_private::ExecutionContextScope to return shared pointers to
all objects in the execution context to further thread harden the internals.
llvm-svn: 150871
otherwise we will have a launched process stopped at the entry point and
it will get reparented when debugserver goes away and we won't be able to
kill the process later.
llvm-svn: 149622
We will return a valid range when possible and omit the "permissions" key
when the memory is not readable, writeable or executeable. This will help us
know the difference between an error back from this packet and unsupported,
from just "this address isn't in a valid region".
llvm-svn: 146394
from a process and hooked it up to the new packet that was recently added
to our GDB remote executable named debugserver. Now Process has the following
new calls:
virtual Error
Process::GetMemoryRegionInfo (lldb::addr_t load_addr, MemoryRegionInfo &range_info);
virtual uint32_t
GetLoadAddressPermissions (lldb::addr_t load_addr);
Only the first one needs to be implemented by subclasses that can add this
support.
Cleaned up the way the new packet was implemented in debugserver to be more
useful as an API inside debugserver. Also found an error where finding a region
for an address actually will pick up the next region that follows the address
in the query so we also need ot make sure that the address we requested the
region for falls into the region that gets returned.
llvm-svn: 144976
Add a more general purpose qMemoryRegionInfo packet which can
describe various attributes about a memory region. Currently it
will return the start address, size, and permissions (read, write,
executable) for the memory region. It may be possible to add
additional attributes in the future such as whether the region is
designated as stack memory or jitted code a la vmmap.
I still haven't implemented the lldb side of the code to use this
packet yet so there may be unexpected behavior - but the basic implementation looks
about right. I'll hook it up to lldb soon and fix any problems that crop up.
llvm-svn: 144175
whether a given address is in an executable region of memory or
not. I haven't written the lldb side that will use this packet it
hasn't been tested yet but it's a simple enough bit of code.
I want to have this feature available for the unwinder code. When
we're stopped at an address with no valid symbol context, there are
a number of questions I'd like to ask --
is the current pc value in an executable region (e.g. did they
jump to unallocated/unexecutable memory? we know how to unwind
from here if so.)
Is the stack pointer or the frame pointer the correct register
to use to find the caller's saved pc value?
Once we're past the first frame we can trust things like eh_frame
and ABI unwind schemes but the first frame is challenging and having
a way to check potential addresses to see if they're executable or
not would help narrow down the possibilities a lot.
llvm-svn: 144074
- If you download and build the sources in the Xcode project, x86_64 builds
by default using the "llvm.zip" checkpointed LLVM.
- If you delete the "lldb/llvm.zip" and the "lldb/llvm" folder, and build the
Xcode project will download the right LLVM sources and build them from
scratch
- If you have a "lldb/llvm" folder already that contains a "lldb/llvm/lib"
directory, we will use the sources you have placed in the LLDB directory.
Python can now be disabled for platforms that don't support it.
Changed the way the libllvmclang.a files get used. They now all get built into
arch specific directories and never get merged into universal binaries as this
was causing issues where you would have to go and delete the file if you wanted
to build an extra architecture slice.
llvm-svn: 143678
then we spawn child processes (debugserver, etc) and those bad settings get
inherited. We stop this from happening by correctly mucking with the posix
spawn attributes.
llvm-svn: 143176
the watchpoint state is changed, not only does the change propagate to all the thread instances,
it also updates a global debug state, if chosen by the DNBArchProtocol derivative.
Once implemented, the DNBArchProtocol derivative, also makes sure that when new thread comes along,
it tries to inherit from the global debug state, if it is valid.
Modify TestWatchpointMultipleThreads.py to test this functionality.
llvm-svn: 140811
it enables the hardware watchpoint for all existing threads. Add a test file for that.
Also fix MachThreadList::DisableHardwareWatchpoint().
llvm-svn: 140757
We had some cases where getting the shared pointer for a module from
the global module list was causing a performance issue when debugging
with DWARF in .o files. Now that the module uses intrusive ref counts,
we can easily convert any pointer to a shared pointer.
llvm-svn: 139983
data sent back to the debugger. On the debugger side, use the opportunity during the
StopInfoMachException::CreateStopReasonWithMachException() method to set the hardware index
for the very watchpoint location.
llvm-svn: 139975
the passed in (MachException::Data &)exc first before possible reassignment of the
member m_stop_exception with exc. This allows lldb to stop at the watchpoint of
a simple test program.
llvm-svn: 139767
o WatchpointLocationList:
Add a GetListMutex() method.
o WatchpointLocation:
Fix Dump() method where there was an extra % in the format string.
o Target.cpp:
Add implementation to CreateWatchpointLocation() to create and enable a watchpoint.
o DNBArchImplX86_64.cpp:
Fix bugs in SetWatchpoint()/ClearWatchpoint() where '==' was used, instead of '=',
to assign/reset the data break address to a debug register.
Also fix bugs where a by reference debug_state should have been used, not by value.
llvm-svn: 139666
in order to distinguish the real single step exception from a watchpoint exception
which uses the same exc_type of EXC_BREAKPOINT and exc_code of EXC_I386_SGL.
This is done by checking the debug status register to find out whether the watchpoint
data break event has fired, and, if yes, stuff the data break address into the exception's
exc_sub_code field on the debugserver side for lldb to consume on the other end.
llvm-svn: 139274
(MachThreadList::EnableHardwareWatchpoint()) where the watchpoint is not associated
with a thread and the current thread, if set, is returned, otherwise we return the
first thread.
Plus minor change to RNBRemote::HandlePacket_z() to use the existing macros to check
the validity of break_id/watch_id.
llvm-svn: 139246
Add a virtual method GetHardwareWatchpointHit() to the DNBArchProtocol base class
which consults the architecture to return the watchpoint hit; otherwise return an
invalid index.
Add impl. of the method to X86_64 and I386 subclasses, plus reset the debug status
register before we resume execution of the inferior thread.
llvm-svn: 139034
cpu registers it uses and it crashes the release version of
debugserver. We just get lucky in Debug builds. Until this
is fixed I am disabling AVX detection to avoid the crashes.
llvm-svn: 137113
the pid of the process currently being debugged by debugserer in
hex, or 0 if unavailable.
This is effectively the same as the qC packet but that packet is
not clear in either its documentation or implementation (in gdb et al)
as to whether it is intended to return a pid or a thread id. qGetPid
is unambiguous.
If qGetPid is unimplemented in the remote debugserver, the debugger may
try qC and see what kind of value is returned..
llvm-svn: 136055
fixed a few bugs that revealed. Now the "register
read" command should show AVX registers
(ymm0-ymm15) on Mac OS X platforms that support
them.
When testing this on Mac OS X, run debugserver
manually, like this:
debugserver --native-regs localhost:1111 /path/to/executable
Then
lldb /path/to/executable
...
(lldb) process connect connect://localhost:1111
llvm-svn: 135331
with the "target modules lookup --address <addr>" command. The variable
ID's, names, types, location for the address, and declaration is
displayed.
This can really help with crash logs since we get, on MacOSX at least,
the registers for the thread that crashed so it is often possible to
figure out some of the variable contents.
llvm-svn: 134886
arguments in hex-encoded form instead of the old QEnvironment packet
which takes them as plain-text strings. Environment variables
containing remote protocol special chars like '#' would fail to set
with QEnvironment.
llvm-svn: 133857
parse NOP instructions. I added the new table entries for the NOP for the
plain NOP, Yield, WFE, WFI, and SEV variants. Modified the opcode emulation
function EmulateInstructionARM::EmulateMOVRdSP(...) to notify us when it is
creating a frame. Also added an abtract way to detect the frame pointer
register for both the standard ARM ABI and for Darwin.
Fixed GDBRemoteRegisterContext::WriteAllRegisterValues(...) to correctly be
able to individually write register values back if case the 'G' packet is
not implemented or returns an error.
Modified the StopInfoMachException to "trace" stop reasons. On ARM we currently
use the BVR/BCR register pairs to say "stop when the PC is not equal to the
current PC value", and this results in a EXC_BREAKPOINT mach exception that
has 0x102 in the code.
Modified debugserver to create the short option string from long option
definitions to make sure it doesn't get out of date. The short option string
was missing many of the newer short option values due to a modification of
the long options defs, and not modifying the short option string.
llvm-svn: 131911
of duplicated code from appearing all over LLDB:
lldb::addr_t
Process::ReadPointerFromMemory (lldb::addr_t vm_addr, Error &error);
bool
Process::WritePointerToMemory (lldb::addr_t vm_addr, lldb::addr_t ptr_value, Error &error);
size_t
Process::ReadScalarIntegerFromMemory (lldb::addr_t addr, uint32_t byte_size, bool is_signed, Scalar &scalar, Error &error);
size_t
Process::WriteScalarToMemory (lldb::addr_t vm_addr, const Scalar &scalar, uint32_t size, Error &error);
in lldb_private::Process the following functions were renamed:
From:
uint64_t
Process::ReadUnsignedInteger (lldb::addr_t load_addr,
size_t byte_size,
Error &error);
To:
uint64_t
Process::ReadUnsignedIntegerFromMemory (lldb::addr_t load_addr,
size_t byte_size,
uint64_t fail_value,
Error &error);
Cleaned up a lot of code that was manually doing what the above functions do
to use the functions listed above.
Added the ability to get a scalar value as a buffer that can be written down
to a process (byte swapping the Scalar value if needed):
uint32_t
Scalar::GetAsMemoryData (void *dst,
uint32_t dst_len,
lldb::ByteOrder dst_byte_order,
Error &error) const;
The "dst_len" can be smaller that the size of the scalar and the least
significant bytes will be written. "dst_len" can also be larger and the
most significant bytes will be padded with zeroes.
Centralized the code that adds or removes address bits for callable and opcode
addresses into lldb_private::Target:
lldb::addr_t
Target::GetCallableLoadAddress (lldb::addr_t load_addr, AddressClass addr_class) const;
lldb::addr_t
Target::GetOpcodeLoadAddress (lldb::addr_t load_addr, AddressClass addr_class) const;
All necessary lldb_private::Address functions now use the target versions so
changes should only need to happen in one place if anything needs updating.
Fixed up a lot of places that were calling :
addr_t
Address::GetLoadAddress(Target*);
to call the Address::GetCallableLoadAddress() or Address::GetOpcodeLoadAddress()
as needed. There were many places in the breakpoint code where things could
go wrong for ARM if these weren't used.
llvm-svn: 131878
and set the address as an opcode address or as a callable address. This is
needed in various places in the thread plans to make sure that addresses that
might be found in symbols or runtime might already have extra bits set (ARM/Thumb).
The new functions are:
bool
Address::SetCallableLoadAddress (lldb::addr_t load_addr, Target *target);
bool
Address::SetOpcodeLoadAddress (lldb::addr_t load_addr, Target *target);
SetCallableLoadAddress will initialize a section offset address if it can,
and if so it might possibly set some bits in the address to make the address
callable (bit zero might get set for ARM for Thumb functions).
SetOpcodeLoadAddress will initialize a section offset address using the
specified target and it will strip any special address bits if needed
depending on the target.
Fixed the ABIMacOSX_arm::GetArgumentValues() function to require arguments
1-4 to be in the needed registers (previously this would incorrectly fallback
to the stack) and return false if unable to get the register values. The
function was also modified to first look for the generic argument registers
and then fall back to finding the registers by name.
Fixed the objective trampoline handler to use the new Address::SetOpcodeLoadAddress
function when needed to avoid address mismatches when trying to complete
steps into objective C methods. Make similar fixes inside the
AppleThreadPlanStepThroughObjCTrampoline::ShouldStop() function.
Modified ProcessGDBRemote::BuildDynamicRegisterInfo(...) to be able to deal with
the new generic argument registers.
Modified RNBRemote::HandlePacket_qRegisterInfo() to handle the new generic
argument registers on the debugserver side.
Modified DNBArchMachARM::NumSupportedHardwareBreakpoints() to be able to
detect how many hardware breakpoint registers there are using a darwin sysctl.
Did the same for hardware watchpoints in
DNBArchMachARM::NumSupportedHardwareWatchpoints().
llvm-svn: 131834
the appropriate registers for arm and x86_64. The register names for the
arguments that are the size of a pointer or less are all named "arg1", "arg2",
etc. This allows you to read these registers by name:
(lldb) register read arg1 arg2 arg3
...
You can also now specify you want to see alternate register names when executing
the read register command:
(lldb) register read --alternate
(lldb) register read -A
llvm-svn: 131376
respective ABI plugins as they were plug-ins that supplied ABI specfic info.
Also hookep up the UnwindAssemblyInstEmulation so that it can generate the
unwind plans for ARM.
Changed the way ABI plug-ins are handed out when you get an instance from
the plug-in manager. They used to return pointers that would be mananged
individually by each client that requested them, but now they are handed out
as shared pointers since there is no state in the ABI objects, they can be
shared.
llvm-svn: 131193
into some cleanup I have been wanting to do when reading/writing registers.
Previously all RegisterContext subclasses would need to implement:
virtual bool
ReadRegisterBytes (uint32_t reg, DataExtractor &data);
virtual bool
WriteRegisterBytes (uint32_t reg, DataExtractor &data, uint32_t data_offset = 0);
There is now a new class specifically designed to hold register values:
lldb_private::RegisterValue
The new register context calls that subclasses must implement are:
virtual bool
ReadRegister (const RegisterInfo *reg_info, RegisterValue ®_value) = 0;
virtual bool
WriteRegister (const RegisterInfo *reg_info, const RegisterValue ®_value) = 0;
The RegisterValue class must be big enough to handle any register value. The
class contains an enumeration for the value type, and then a union for the
data value. Any integer/float values are stored directly in an appropriate
host integer/float. Anything bigger is stored in a byte buffer that has a length
and byte order. The RegisterValue class also knows how to copy register value
bytes into in a buffer with a specified byte order which can be used to write
the register value down into memory, and this does the right thing when not
all bytes from the register values are needed (getting a uint8 from a uint32
register value..).
All RegiterContext and other sources have been switched over to using the new
regiter value class.
llvm-svn: 131096
a new "QLaunchArch:<arch-name>" where <arch-name> is the architecture name.
This allows us to remotely launch a debugserver and then set the architecture
for the binary we will launch.
llvm-svn: 131064
Johnny Chen