Optimization transformations are intentionally disabled by the 'optnone'
function attribute. Therefore do not warn if transformation metadata is
still present.
Using the legacy pass manager structure, the `skipFunction` method takes
care for the optnone attribute (already called before this patch). For
the new pass manager, there is no equivalent, so we check for the
'optnone' attribute manually.
Differential Revision: https://reviews.llvm.org/D55690
llvm-svn: 349184
The `changeToCall` function did not preserve the invoke's metadata.
Currently, there is probably no metadata that depends on being applied
on a CallInst or InvokeInst. Therefore we can replace the instruction's
metadata.
This fixes http://llvm.org/PR39994
Suggested-by: Moritz Kreutzer <moritz.kreutzer@siemens.com>
Differential Revision: https://reviews.llvm.org/D55666
llvm-svn: 349170
Once we detect a 'P', we know we a pointer type is upcoming, so
we make some assumptions about the output that follows. If those
assumptions didn't hold, we would assert. Instead, we should
fail gracefully and propagate the error up.
llvm-svn: 349169
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
Implement options in clang to enable recording the driver command-line
in an ELF section.
Implement a new special named metadata, llvm.commandline, to support
frontends embedding their command-line options in IR/ASM/ELF.
This differs from the GCC implementation in some key ways:
* In GCC there is only one command-line possible per compilation-unit,
in LLVM it mirrors llvm.ident and multiple are allowed.
* In GCC individual options are separated by NULL bytes, in LLVM entire
command-lines are separated by NULL bytes. The advantage of the GCC
approach is to clearly delineate options in the face of embedded
spaces. The advantage of the LLVM approach is to support merging
multiple command-lines unambiguously, while handling embedded spaces
with escaping.
Differential Revision: https://reviews.llvm.org/D54487
Clang Differential Revision: https://reviews.llvm.org/D54489
llvm-svn: 349155
It costs nothing to spill an IMPLICIT_DEF value (the only spill code that's
generated is a KILL of the value), so when creating split constraints if the
live-out value is IMPLICIT_DEF the exit constraint should be DontCare instead
of PrefReg.
Differential Revision: https://reviews.llvm.org/D55652
llvm-svn: 349151
Refactor the ARMInstructionSelector to cache some opcodes in the
constructor instead of checking all the time if we're in ARM or Thumb
mode.
llvm-svn: 349143
Mark G_ADD, G_SUB, G_MUL, G_AND, G_OR and G_XOR as legal for both ARM
and Thumb2.
Extract the legalizer tests for these opcodes into another file.
Add tests for the instruction selector.
llvm-svn: 349142
Summary:
If the setcc already has the target desired type we can reach the getSetCC/getSExtOrTrunc after the MatchingVecType check with the exact same types as the nodes we started with. This causes those causes VsetCC to be CSEd to N0 and the getSExtOrTrunc will CSE to N. When we return N, the caller will think that meant we called CombineTo and did our own worklist management. But that's not what happened. This prevents target hooks from being called for the node.
To fix this, I've now returned SDValue if the setcc is already the desired type. But to avoid some regressions in X86 I've had to disable one of the target combines that wasn't being reached before in the case of a (sext (setcc)). If we get vector widening legalization enabled that entire function will be deleted anyway so hopefully this is only for the short term.
Reviewers: RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55459
llvm-svn: 349137
Summary:
The two utility functions were added in D47919 to support SHT_RELR.
However, these are just relative relocations types and are't
necessarily be named Relr.
Reviewers: phosek, dberris
Reviewed By: dberris
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55691
llvm-svn: 349133
DataExtractor::getU64 modifies the OffsetPtr which also pass to
RelocateOrElse which breaks on Windows. This addresses the issue
introduced in r349120.
Differential Revision: https://reviews.llvm.org/D55689
llvm-svn: 349129
When the instrumented binary is linked as PIE, we need to apply the
relative relocations to sleds. This is handled by the dynamic linker
at runtime, but when processing the file we have to do it ourselves.
Differential Revision: https://reviews.llvm.org/D55542
llvm-svn: 349120
build version load commands in the object file
This commit introduces a new metadata node called "SDK Version". It will be set
by the frontend to mark the platform SDK (macOS/iOS/etc) version which was used
during that particular compilation.
This node is used when machine code is emitted, by either saving the SDK version
into the appropriate macho load command (version min/build version), or by
emitting the assembly for these load commands with the SDK version specified as
well.
The assembly for both load commands is extended by allowing it to contain the
sdk_version X, Y [, Z] trailing directive to represent the SDK version
respectively.
rdar://45774000
Differential Revision: https://reviews.llvm.org/D55612
llvm-svn: 349119
This isn't quite NFC, but I don't know how to expose
any outward diffs from these changes. Mostly, this
was confusing because it used 'VT' to refer to the
operand type rather the usual type of the input node.
There's also a large block at the end that is dedicated
solely to matching loads, but that wasn't obvious. This
could probably be split up into separate functions to
make it easier to see.
It's still not clear to me when we make certain transforms
because the legality and constant conditions are
intertwined in a way that might be improved.
llvm-svn: 349095
This requires the two callers to manifest a 0 to make EmitCmp call EmitTest.
I'm looking into changing how we combine TEST and flag setting instructions to not be part of lowering. And instead be part of DAG combine or isel. Which will mean EmitTest will probably become gutted and maybe disappear entirely.
llvm-svn: 349094
Fix the logic in the definition of the `ExynosShiftExPred` as a more
specific version of `ExynosShiftPred`. But, since `ExynosShiftExPred` is
not used yet, this change has NFC.
llvm-svn: 349091
ProfileSampleAccurate is used to indicate the profile has exact match to the
code to be optimized.
Previously ProfileSampleAccurate is handled in ProfileSummaryInfo::isColdCallSite
and ProfileSummaryInfo::isColdBlock. A better solution is to initialize function
entry count to 0 when ProfileSampleAccurate is true, so we don't have to handle
ProfileSampleAccurate in multiple places.
Differential Revision: https://reviews.llvm.org/D55660
llvm-svn: 349088
Currently memcpyopt optimizes cases like
memset(a, byte, N);
memcpy(b, a, M);
to
memset(a, byte, N);
memset(b, byte, M);
if M <= N. Often this allows further simplifications down the line,
which drop the first memset entirely.
This patch extends this optimization for the case where M > N, but we
know that the bytes a[N..M] are undef due to alloca/lifetime.start.
This situation arises relatively often for Rust code, because Rust does
not initialize trailing structure padding and loves to insert redundant
memcpys. This also fixes https://bugs.llvm.org/show_bug.cgi?id=39844.
The previous version of this patch did not perform dependency checking
properly: While the dependency is checked at the position of the memset,
the used size must be that of the memcpy. Previously the size of the
memset was used, which missed modification in the region
MemSetSize..CopySize, resulting in miscompiles. The added tests cover
variations of this issue.
Differential Revision: https://reviews.llvm.org/D55120
llvm-svn: 349078
Summary:
This patch computes the synthetic function entry count on the whole
program callgraph (based on module summary) and writes the entry counts
to the summary. After function importing, this count gets attached to
the IR as metadata. Since it adds a new field to the summary, this bumps
up the version.
Reviewers: tejohnson
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D43521
llvm-svn: 349076
Summary:
Macros are expanded on a single line. In case of large expansions,
with sufficiently many instructions with memory operands (and when
-fdebug-info-for-profiling is requested), we may be unable to generate
new base discriminator values - new values overflow (base
discriminators may not be larger than 2^12).
This CL warns instead of asserting in such a case. A subsequent CL
will add APIs to check for overflow before creating new debug info.
See https://bugs.llvm.org/show_bug.cgi?id=39890
Reviewers: davidxl, wmi, gbedwell
Reviewed By: davidxl
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D55643
llvm-svn: 349075
Summary:
llvm-size uses "isText()" etc. which seem to indicate whether the section contains code-like things, not whether or not it will actually go in the text segment when in a fully linked executable.
The unit test added (elf-sizes.test) shows some types of sections that cause discrepencies versus the GNU size tool. llvm-size is not correctly reporting sizes of things mapping to text/data segments, at least for ELF files.
This fixes pr38723.
Reviewers: echristo, Bigcheese, MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54369
llvm-svn: 349074
The actual type of the first argument of the @dbg intrinsic
doesn't really matter as we're setting it to `undef`, but the
bitcode reader is picky about `void` types.
llvm-svn: 349069
On 32-bit archs, before, we would assume that an indirect symbol will
never have local linkage. This can lead to miscompiles where the
symbol's value would be 0 and the linker would use that value, because
the indirect symbol table would contain the value
`INDIRECT_SYMBOL_LOCAL` for that specific symbol.
Differential Revision: https://reviews.llvm.org/D55573
llvm-svn: 349060
This is a retry of rL349051 (reverted at rL349056). I changed the check for dead-ness from
number of uses to an opcode test for DELETED_NODE based on existing similar code.
Differential Revision: https://reviews.llvm.org/D55655
llvm-svn: 349058
There's still a couple of minor SimplifyDemandedElts regressions in some of the shift amount splats that will be fixed in future patches.
llvm-svn: 349052
Summary: The Sparc V9 membar instruction can enforce different types of
memory orderings depending on the value in its immediate field. In the
architectural manual the type is selected by combining different assembler
tags into a mask. This patch adds support for these tags.
Reviewers: jyknight, venkatra, brad
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D53491
llvm-svn: 349048
Summary:
Constraining an integer value to a floating point register using "f"
causes an llvm_unreachable to trigger. This patch allows i32 integers
to be placed in a single precision float register and i64 integers to
be placed in a double precision float register. This matches the behavior
of GCC.
For other types the llvm_unreachable is removed to instead trigger an
error message that points out the offending line.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: eraman, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D51614
llvm-svn: 349045
There are several Pseudo in PowerPC backend.
eg:
* ISel Pseudo-instructions , which has let usesCustomInserter=1 in td
ExpandISelPseudos -> EmitInstrWithCustomInserter will deal with them.
* Post-RA pseudo instruction, which has let isPseudo = 1 in td, or Standard pseudo (SUBREG_TO_REG,COPY etc.)
ExpandPostRAPseudos -> expandPostRAPseudo will expand them
* Multi-instruction pseudo operations will expand them PPCAsmPrinter::EmitInstruction
* Pseudo instruction in CodeEmitter, which has encoding of 0.
Currently, in td files, especially PPCInstrVSX.td,
we did not distinguish Post-RA pseudo instruction and Pseudo instruction in CodeEmitter very clearly.
This patch is to
* Rename Pseudo<> class to PPCEmitTimePseudo, which means encoding of 0 in CodeEmitter
* Introduce new class PPCPostRAExpPseudo <> for previous PostRA Pseudo
* Introduce new class PPCCustomInserterPseudo <> for previous Isel Pseudo
Differential Revision: https://reviews.llvm.org/D55143
llvm-svn: 349044
When computing register allocation hints for a GRX32Bit register, make sure
that any of the hinted registers that are also copy hints are returned first
in the list.
Review: Ulrich Weigand.
llvm-svn: 349037
Summary:
Sometimes MIR-level passes create DILocations that were not present in the
LLVM-IR. For example, it may merge two DILocations together to produce a
DILocation that points to line 0.
Previously, the address of these DILocations were printed which prevented the
MIR from being read back into LLVM. With this patch, DILocations will use
metadata references where possible and fall back on serializing them inline like so:
MOV32mr %stack.0.x.addr, 1, _, 0, _, %0, debug-location !DILocation(line: 1, scope: !15)
Reviewers: aprantl, vsk, arphaman
Reviewed By: aprantl
Subscribers: probinson, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D55243
llvm-svn: 349035
Mark G_SEXT, G_ZEXT and G_ANYEXT to 32 bits as legal and add support for
them in the instruction selector. This uses handwritten code again
because the patterns that are generated with TableGen are tuned for what
the DAG combiner would produce and not for simple sext/zext nodes.
Luckily, we only need to update the opcodes to use the Thumb2 variants,
everything else can be reused from ARM.
llvm-svn: 349026
Move existing rotation expansion code into TargetLowering and set it up for vectors as well.
Ideally this would share more of the funnel shift expansion, but we handle the shift amount modulo quite differently at the moment.
Begun removing x86 vector rotate custom lowering to use the expansion.
llvm-svn: 349025
Adds support for the various RISC-V FMA instructions (fmadd, fmsub, fnmsub, fnmadd).
The criteria for choosing whether a fused add or subtract is used, as well as
whether the product is negated or not, is whether some of the arguments to the
llvm.fma.* intrinsic are negated or not. In the tests, extraneous fadd
instructions were added to avoid the negation being performed using a xor
trick, which prevented the proper FMA forms from being selected and thus
tested.
The FMA instruction patterns might seem incorrect (e.g., fnmadd: -rs1 * rs2 -
rs3), but they should be correct. The misleading names were inherited from
MIPS, where the negation happens after computing the sum.
The llvm.fmuladd.* intrinsics still do not generate RISC-V FMA instructions,
as that depends on TargetLowering::isFMAFasterthanFMulAndFAdd.
Some comments in the test files about what type of instructions are there
tested were updated, to better reflect the current content of those test
files.
Differential Revision: https://reviews.llvm.org/D54205
Patch by Luís Marques.
llvm-svn: 349023
Michael Kruse