Thanks to help from Nadav and Hal, I have a more reasonable (and even
correct!) approach. This specifically penalizes the insertelement
and extractelement operations for the performance hit that will occur
on PowerPC processors.
llvm-svn: 174725
Certain vector operations don't vectorize well with the current
PowerPC implementation. Element insert/extract performs poorly
without VSX support because Altivec requires going through memory.
SREM, UREM, and VSELECT all produce bad scalar code.
There's a lot of work to do for the cost model before
autovectorization will be tuned well, and this is not an attempt to
address the larger problem.
llvm-svn: 174660
Most of PPCCallingConv.td is used only by the 32-bit SVR4 ABI. Rename
things to clarify this. Also delete some code that's been commented out
for a long time.
llvm-svn: 174526
The liveout lists are about to be removed from MRI, this is the only
place they were used after register allocation.
Get the live out V registers directly from the return instructions
instead.
llvm-svn: 174399
I didn't see those because the test case used "not grep". FileCheck the test and
XFAIL it, preserving the old optimization, so this can be fixed eventually.
llvm-svn: 174330
This required disabling a PowerPC optimization that did the following:
input:
x = BUILD_VECTOR <i32 16, i32 16, i32 16, i32 16>
lowered to:
tmp = BUILD_VECTOR <i32 8, i32 8, i32 8, i32 8>
x = ADD tmp, tmp
The add now gets folded immediately and we're back at the BUILD_VECTOR we
started from. I don't see a way to fix this currently so I left it disabled
for now.
Fix some trivially foldable X86 tests too.
llvm-svn: 174325
This is the first commit of a large series which will add support for the
QPX vector instruction set to the PowerPC backend. This instruction set is
used on the IBM Blue Gene/Q supercomputers.
llvm-svn: 173973
conditions are met:
1. They share the same operand and are in the same BB.
2. Both outputs are used.
3. The target has a native instruction that maps to ISD::FSINCOS node or
the target provides a sincos library call.
Implemented the generic optimization in sdisel and enabled it for
Mac OSX. Also added an additional optimization for x86_64 Mac OSX by
using an alternative entry point __sincos_stret which returns the two
results in xmm0 / xmm1.
rdar://13087969
PR13204
llvm-svn: 173755
This provides a place to add customized operation cost information and
control some other target-specific IR-level transformations.
The only non-trivial logic in this checkin assigns a higher cost to
unaligned loads and stores (covered by the included test case).
llvm-svn: 173520
No functionality change intended.
This captures the first two cases GPR32/64. For the others, we need
an addition operator (if we have one, I've not yet found it).
Based on a suggestion made by Tom Stellard in the AArch64 review!
llvm-svn: 173366
_Complex float and _Complex long double, by simply increasing the
number of floating point registers available for return values.
The test case verifies that the correct registers are loaded.
llvm-svn: 172733
This patch adjust the r171506 to make all DWARF enconding pc-relative
for PPC64. It also adds the R_PPC64_REL32 relocation handling in MCJIT
(since the eh_frame will not generate PIC-relative relocation) and also
adds the emission of stubs created by the TTypeEncoding.
llvm-svn: 171979
code generation. Variables addressed through a GlobalAlias were not being
handled, and variables with available_externally linkage were treated
incorrectly. The patch contains two new tests to verify the correct code
generation for these cases.
llvm-svn: 171778
a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.
The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.
The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.
The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.
The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.
The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.
The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.
The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.
Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.
Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.
Commits to update DragonEgg and Clang will be made presently.
llvm-svn: 171681
This patch fixes the PPC eh_frame definitions for the personality and
frame unwinding for PIC objects. It makes PIC build correctly creates
relative relocations in the '.rela.eh_frame' segments and thus avoiding
a text relocation that generates a DT_TEXTREL segments in link phase.
llvm-svn: 171506
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
directly.
This is in preparation for removing the use of the 'Attribute' class as a
collection of attributes. That will shift to the AttributeSet class instead.
llvm-svn: 171253
Use of store or load with the atomic specifier on 64-bit types would
cause instruction-selection failures. As with the 32-bit case, these
can use the default expansion in terms of cmp-and-swap.
llvm-svn: 171072
There's probably a better expansion for those nodes than the default for
altivec, but this is better than crashing. VSELECTs occur in loop vectorizer
output.
llvm-svn: 170551
for TLS dynamic models on 64-bit PowerPC ELF. The default sort routine
for relocations only sorts on the r_offset field; but with TLS, there
can be two relocations with the same r_offset. For PowerPC, this patch
sorts secondarily on descending r_type, which matches the behavior
expected by the linker.
llvm-svn: 170237
for a wider range of GOT entries that can hold thread-relative offsets.
This matches the behavior of GCC, which was not documented in the PPC64 TLS
ABI. The ABI will be updated with the new code sequence.
Former sequence:
ld 9,x@got@tprel(2)
add 9,9,x@tls
New sequence:
addis 9,2,x@got@tprel@ha
ld 9,x@got@tprel@l(9)
add 9,9,x@tls
Note that a linker optimization exists to transform the new sequence into
the shorter sequence when appropriate, by replacing the addis with a nop
and modifying the base register and relocation type of the ld.
llvm-svn: 170209
some hackery in place that hid my poor use of TblGen, which I've now sorted
out and cleaned up. No change in observable behavior, so no new test cases.
llvm-svn: 170149
PowerPC target. This is the last of the four models, so we now have
full TLS support.
This is mostly a straightforward extension of the general dynamic model.
I had to use an additional Chain operand to tie ADDIS_DTPREL_HA to the
register copy following ADDI_TLSLD_L; otherwise everything above the
ADDIS_DTPREL_HA appeared dead and was removed.
As before, there are new test cases to test the assembly generation, and
the relocations output during integrated assembly. The expected code
gen sequence can be read in test/CodeGen/PowerPC/tls-ld.ll.
There are a couple of things I think can be done more efficiently in the
overall TLS code, so there will likely be a clean-up patch forthcoming;
but for now I want to be sure the functionality is in place.
Bill
llvm-svn: 170003
mention the inline memcpy / memset expansion code is a mess?
This patch split the ZeroOrLdSrc argument into two: IsMemset and ZeroMemset.
The first indicates whether it is expanding a memset or a memcpy / memmove.
The later is whether the memset is a memset of zero. It's totally possible
(likely even) that targets may want to do different things for memcpy and
memset of zero.
llvm-svn: 169959
Also added more comments to explain why it is generally ok to return true.
- Rename getOptimalMemOpType argument IsZeroVal to ZeroOrLdSrc. It's meant to
be true for loaded source (memcpy) or zero constants (memset). The poor name
choice is probably some kind of legacy issue.
llvm-svn: 169954
Given a thread-local symbol x with global-dynamic access, the generated
code to obtain x's address is:
Instruction Relocation Symbol
addis ra,r2,x@got@tlsgd@ha R_PPC64_GOT_TLSGD16_HA x
addi r3,ra,x@got@tlsgd@l R_PPC64_GOT_TLSGD16_L x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
<use address in r3>
The implementation borrows from the medium code model work for introducing
special forms of ADDIS and ADDI into the DAG representation. This is made
slightly more complicated by having to introduce a call to the external
function __tls_get_addr. Using the full call machinery is overkill and,
more importantly, makes it difficult to add a special relocation. So I've
introduced another opcode GET_TLS_ADDR to represent the function call, and
surrounded it with register copies to set up the parameter and return value.
Most of the code is pretty straightforward. I ran into one peculiarity
when I introduced a new PPC opcode BL8_NOP_ELF_TLSGD, which is just like
BL8_NOP_ELF except that it takes another parameter to represent the symbol
("x" above) that requires a relocation on the call. Something in the
TblGen machinery causes BL8_NOP_ELF and BL8_NOP_ELF_TLSGD to be treated
identically during the emit phase, so this second operand was never
visited to generate relocations. This is the reason for the slightly
messy workaround in PPCMCCodeEmitter.cpp:getDirectBrEncoding().
Two new tests are included to demonstrate correct external assembly and
correct generation of relocations using the integrated assembler.
Comments welcome!
Thanks,
Bill
llvm-svn: 169910
on 64-bit PowerPC ELF.
The patch includes code to handle external assembly and MC output with the
integrated assembler. It intentionally does not support the "old" JIT.
For the initial-exec TLS model, the ABI requires the following to calculate
the address of external thread-local variable x:
Code sequence Relocation Symbol
ld 9,x@got@tprel(2) R_PPC64_GOT_TPREL16_DS x
add 9,9,x@tls R_PPC64_TLS x
The register 9 is arbitrary here. The linker will replace x@got@tprel
with the offset relative to the thread pointer to the generated GOT
entry for symbol x. It will replace x@tls with the thread-pointer
register (13).
The two test cases verify correct assembly output and relocation output
as just described.
PowerPC-specific selection node variants are added for the two
instructions above: LD_GOT_TPREL and ADD_TLS. These are inserted
when an initial-exec global variable is encountered by
PPCTargetLowering::LowerGlobalTLSAddress(), and later lowered to
machine instructions LDgotTPREL and ADD8TLS. LDgotTPREL is a pseudo
that uses the same LDrs support added for medium code model's LDtocL,
with a different relocation type.
The rest of the processing is straightforward.
llvm-svn: 169281
missed in the first pass because the script didn't yet handle include
guards.
Note that the script is now able to handle all of these headers without
manual edits. =]
llvm-svn: 169224
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
llvm-svn: 169131
instruction (vmaddfp) to conform with IEEE to ensure the sign of a zero
result when resulting product is -0.0.
The -0.0 vector addend to vmaddfp is generated by a creating a vector
with full bits sets and then shifting each elements by 31-bits to the
left, resulting in a vector of 0x80000000 (or -0.0 as float).
The 'buildvec_canonicalize.ll' was adjusted to reflect this change and
the 'vec_mul.ll' was complemented with the float vector multiplication
test.
llvm-svn: 168998
The createPPCMCAsmInfo routine used PPC::R1 as the initial frame
pointer register, but on PPC64 the 32-bit R1 register does not
have a corresponding DWARF number, causing invalid CIE initial
frame state to be emitted. Fix by using PPC::X1 instead.
llvm-svn: 168799
When the CodeGenInfo is to be created for the PPC64 target machine,
a default code-model selection is converted to CodeModel::Medium
provided we are not targeting the Darwin OS. Defaults for Darwin
are unaffected.
llvm-svn: 168747
The default for 64-bit PowerPC is small code model, in which TOC entries
must be addressable using a 16-bit offset from the TOC pointer. Additionally,
only TOC entries are addressed via the TOC pointer.
With medium code model, TOC entries and data sections can all be addressed
via the TOC pointer using a 32-bit offset. Cooperation with the linker
allows 16-bit offsets to be used when these are sufficient, reducing the
number of extra instructions that need to be executed. Medium code model
also does not generate explicit TOC entries in ".section toc" for variables
that are wholly internal to the compilation unit.
Consider a load of an external 4-byte integer. With small code model, the
compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
With medium model, it instead generates:
addis 3, 2, .LC1@toc@ha
ld 3, .LC1@toc@l(3)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
Here .LC1@toc@ha is a relocation requesting the upper 16 bits of the
32-bit offset of ei's TOC entry from the TOC base pointer. Similarly,
.LC1@toc@l is a relocation requesting the lower 16 bits. Note that if
the linker determines that ei's TOC entry is within a 16-bit offset of
the TOC base pointer, it will replace the "addis" with a "nop", and
replace the "ld" with the identical "ld" instruction from the small
code model example.
Consider next a load of a function-scope static integer. For small code
model, the compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc test_fn_static.si[TC],test_fn_static.si
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
For medium code model, the compiler generates:
addis 3, 2, test_fn_static.si@toc@ha
addi 3, 3, test_fn_static.si@toc@l
lwz 4, 0(3)
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
Again, the linker may replace the "addis" with a "nop", calculating only
a 16-bit offset when this is sufficient.
Note that it would be more efficient for the compiler to generate:
addis 3, 2, test_fn_static.si@toc@ha
lwz 4, test_fn_static.si@toc@l(3)
The current patch does not perform this optimization yet. This will be
addressed as a peephole optimization in a later patch.
For the moment, the default code model for 64-bit PowerPC will remain the
small code model. We plan to eventually change the default to medium code
model, which matches current upstream GCC behavior. Note that the different
code models are ABI-compatible, so code compiled with different models will
be linked and execute correctly.
I've tested the regression suite and the application/benchmark test suite in
two ways: Once with the patch as submitted here, and once with additional
logic to force medium code model as the default. The tests all compile
cleanly, with one exception. The mandel-2 application test fails due to an
unrelated ABI compatibility with passing complex numbers. It just so happens
that small code model was incredibly lucky, in that temporary values in
floating-point registers held the expected values needed by the external
library routine that was called incorrectly. My current thought is to correct
the ABI problems with _Complex before making medium code model the default,
to avoid introducing this "regression."
Here are a few comments on how the patch works, since the selection code
can be difficult to follow:
The existing logic for small code model defines three pseudo-instructions:
LDtoc for most uses, LDtocJTI for jump table addresses, and LDtocCPT for
constant pool addresses. These are expanded by SelectCodeCommon(). The
pseudo-instruction approach doesn't work for medium code model, because
we need to generate two instructions when we match the same pattern.
Instead, new logic in PPCDAGToDAGISel::Select() intercepts the TOC_ENTRY
node for medium code model, and generates an ADDIStocHA followed by either
a LDtocL or an ADDItocL. These new node types correspond naturally to
the sequences described above.
The addis/ld sequence is generated for the following cases:
* Jump table addresses
* Function addresses
* External global variables
* Tentative definitions of global variables (common linkage)
The addis/addi sequence is generated for the following cases:
* Constant pool entries
* File-scope static global variables
* Function-scope static variables
Expanding to the two-instruction sequences at select time exposes the
instructions to subsequent optimization, particularly scheduling.
The rest of the processing occurs at assembly time, in
PPCAsmPrinter::EmitInstruction. Each of the instructions is converted to
a "real" PowerPC instruction. When a TOC entry needs to be created, this
is done here in the same manner as for the existing LDtoc, LDtocJTI, and
LDtocCPT pseudo-instructions (I factored out a new routine to handle this).
I had originally thought that if a TOC entry was needed for LDtocL or
ADDItocL, it would already have been generated for the previous ADDIStocHA.
However, at higher optimization levels, the ADDIStocHA may appear in a
different block, which may be assembled textually following the block
containing the LDtocL or ADDItocL. So it is necessary to include the
possibility of creating a new TOC entry for those two instructions.
Note that for LDtocL, we generate a new form of LD called LDrs. This
allows specifying the @toc@l relocation for the offset field of the LD
instruction (i.e., the offset is replaced by a SymbolLo relocation).
When the peephole optimization described above is added, we will need
to do similar things for all immediate-form load and store operations.
The seven "mcm-n.ll" test cases are kept separate because otherwise the
intermingling of various TOC entries and so forth makes the tests fragile
and hard to understand.
The above assumes use of an external assembler. For use of the
integrated assembler, new relocations are added and used by
PPCELFObjectWriter. Testing is done with "mcm-obj.ll", which tests for
proper generation of the various relocations for the same sequences
tested with the external assembler.
llvm-svn: 168708
The last remaining bit is "bcl 20, 31, AnonSymbol", which I couldn't find the
instruction definition for. Only whitespace changes in assembly output.
llvm-svn: 168541
This patch lowers the llvm.floor, llvm.ceil, llvm.trunc, and
llvm.nearbyint to Altivec instruction when using 4 single-precision
float vectors.
llvm-svn: 168086
to be extended to a full register. This is modeled in the IR by marking
the return value (or argument) with a signext or zeroext attribute.
However, while these attributes are respected for function arguments,
they are currently ignored for function return values by the PowerPC
back-end. This patch updates PPCCallingConv.td to ask for the promotion
to i64, and fixes LowerReturn and LowerCallResult to implement it.
The new test case verifies that both arguments and return values are
properly extended when passing them; and also that the optimizers
understand incoming argument and return values are in fact guaranteed
by the ABI to be extended.
The patch caused a spurious breakage in CodeGen/PowerPC/coalesce-ext.ll,
since the test case used a "ret" instruction to create a use of an i32
value at the end of the function (to set up data flow as required for
what the test is intended to test). Since there's now an implicit
promotion to i64, that data flow no longer works as expected. To fix
this, this patch now adds an extra "add" to ensure we have an appropriate
use of the i32 value.
llvm-svn: 167396
The Z constraint specifies an r+r memory address, and the y modifier expands
to the "r, r" in the asm string. For this initial implementation, the base
register is forced to r0 (which has the special meaning of 0 for r+r addressing
on PowerPC) and the full address is taken in the second register. In the
future, this should be improved.
llvm-svn: 167388
r165941: Resubmit the changes to llvm core to update the functions to
support different pointer sizes on a per address space basis.
Despite this commit log, this change primarily changed stuff outside of
VMCore, and those changes do not carry any tests for correctness (or
even plausibility), and we have consistently found questionable or flat
out incorrect cases in these changes. Most of them are probably correct,
but we need to devise a system that makes it more clear when we have
handled the address space concerns correctly, and ideally each pass that
gets updated would receive an accompanying test case that exercises that
pass specificaly w.r.t. alternate address spaces.
However, from this commit, I have retained the new C API entry points.
Those were an orthogonal change that probably should have been split
apart, but they seem entirely good.
In several places the changes were very obvious cleanups with no actual
multiple address space code added; these I have not reverted when
I spotted them.
In a few other places there were merge conflicts due to a cleaner
solution being implemented later, often not using address spaces at all.
In those cases, I've preserved the new code which isn't address space
dependent.
This is part of my ongoing effort to clean out the partial address space
code which carries high risk and low test coverage, and not likely to be
finished before the 3.2 release looms closer. Duncan and I would both
like to see the above issues addressed before we return to these
changes.
llvm-svn: 167222
getIntPtrType support for multiple address spaces via a pointer type,
and also introduced a crasher bug in the constant folder reported in
PR14233.
These commits also contained several problems that should really be
addressed before they are re-committed. I have avoided reverting various
cleanups to the DataLayout APIs that are reasonable to have moving
forward in order to reduce the amount of churn, and minimize the number
of commits that were reverted. I've also manually updated merge
conflicts and manually arranged for the getIntPtrType function to stay
in DataLayout and to be defined in a plausible way after this revert.
Thanks to Duncan for working through this exact strategy with me, and
Nick Lewycky for tracking down the really annoying crasher this
triggered. (Test case to follow in its own commit.)
After discussing with Duncan extensively, and based on a note from
Micah, I'm going to continue to back out some more of the more
problematic patches in this series in order to ensure we go into the
LLVM 3.2 branch with a reasonable story here. I'll send a note to
llvmdev explaining what's going on and why.
Summary of reverted revisions:
r166634: Fix a compiler warning with an unused variable.
r166607: Add some cleanup to the DataLayout changes requested by
Chandler.
r166596: Revert "Back out r166591, not sure why this made it through
since I cancelled the command. Bleh, sorry about this!
r166591: Delete a directory that wasn't supposed to be checked in yet.
r166578: Add in support for getIntPtrType to get the pointer type based
on the address space.
llvm-svn: 167221
parameters. Examples of these are:
struct { } a;
union { } b[256];
int a[0];
An empty aggregate has an address, although dereferencing that address is
pointless. When passed as a parameter, an empty aggregate does not consume
a protocol register, nor does it consume a doubleword in the parameter save
area. Passing an empty aggregate by reference passes an address just as
for any other aggregate. Returning an empty aggregate uses GPR3 as a hidden
address of the return value location, just as for any other aggregate.
The patch modifies PPCTargetLowering::LowerFormalArguments_64SVR4 and
PPCTargetLowering::LowerCall_64SVR4 to properly skip empty aggregate
parameters passed by value. The handling of return values and by-reference
parameters was already correct.
Built on powerpc64-unknown-linux-gnu and tested with no new regressions.
A test case is included to test proper handling of empty aggregate
parameters on both sides of the function call protocol.
llvm-svn: 167090
This patch adds more support for vector type comparisons using altivec.
It adds correct support for v16i8, v8i16, v4i32, and v4f32 vector
types for comparison operators ==, !=, >, >=, <, and <=.
llvm-svn: 167015
ELF ABI.
A varargs parameter consisting of a single-precision floating-point value,
or of a single-element aggregate containing a single-precision floating-point
value, must be passed in the low-order (rightmost) four bytes of the
doubleword stack slot reserved for that parameter. If there are GPR protocol
registers remaining, the parameter must also be mirrored in the low-order
four bytes of the reserved GPR.
Prior to this patch, such parameters were being passed in the high-order
four bytes of the stack slot and the mirrored GPR.
The patch adds a new test case to verify the correct code generation.
llvm-svn: 166968
ELF subtarget.
The existing logic is used as a fallback to avoid any changes to the Darwin
ABI. PPC64 ELF now has two possible data layout strings: one for FreeBSD,
which requires 8-byte alignment, and a default string that requires
16-byte alignment.
I've added a test for PPC64 Linux to verify the 16-byte alignment. If
somebody wants to add a separate test for FreeBSD, that would be great.
Note that there is a companion patch to update the alignment information
in Clang, which I am committing now as well.
llvm-svn: 166928
This patch fixes the rldcl/rldicl/rldicr instruction emission. The issue is
the MDForm_1 instruction defines the PowerISA MB field from 'rldicl'
with the name MBE, but RLDCL/RLDICL/RLDICR definition uses as 'MB'.
It end up by generatint the 'rldicl' enconding at
'lib/Target/PowerPC/PPCGenMCCodeEmitter.inc' to use the fourth argument as the
third. The patch changes it by adjusting to use the fourth argument as
intended.
Fixes PR14180.
llvm-svn: 166770
and also fixes the R_PPC64_TOC16 and R_PPC64_TOC16_DS relocation offset.
The 'nop' is needed so a restore TOC instruction (ld r2,40(r1)) can be placed
by the linker to correct restore the TOC of previous function.
Current code has two issues: it defines in PPCInstr64Bit.td file a LDinto_toc
and LDtoc_restore as a DSForm_1 with DS_RA=0 where it should be
DS=2 (the 8 bytes displacement of the TOC saving). It also wrongly emits a
MC intruction using an uint32_t value while the PPC::BL8_NOP_ELF
and PPC::BLA8_NOP_ELF are both uint64_t (because of the following 'nop').
This patch corrects the remaining ExecutionEngine using MCJIT:
ExecutionEngine/2002-12-16-ArgTest.ll
ExecutionEngine/2003-05-07-ArgumentTest.ll
ExecutionEngine/2005-12-02-TailCallBug.ll
ExecutionEngine/hello.ll
ExecutionEngine/hello2.ll
ExecutionEngine/test-call.ll
llvm-svn: 166682
structs having size 3, 5, 6, or 7. Such a struct must be passed and received
as right-justified within its register or memory slot. The problem is only
present for structs that are passed in registers.
Previously, as part of a patch handling all structs of size less than 8, I
added logic to rotate the incoming register so that the struct was left-
justified prior to storing the whole register. This was incorrect because
the address of the parameter had already been adjusted earlier to point to
the right-adjusted value in the storage slot. Essentially I had accidentally
accounted for the right-adjustment twice.
In this patch, I removed the incorrect logic and reorganized the code to make
the flow clearer.
The removal of the rotates changes the expected code generation, so test case
structsinregs.ll has been modified to reflect this. I also added a new test
case, jaggedstructs.ll, to demonstrate that structs of these sizes can now
be properly received and passed.
I've built and tested the code on powerpc64-unknown-linux-gnu with no new
regressions. I also ran the GCC compatibility test suite and verified that
earlier problems with these structs are now resolved, with no new regressions.
llvm-svn: 166680
This patch adds initial PPC64 TOC MC object creation using the small mcmodel
(a single 64K TOC) adding the some TOC relocations (R_PPC64_TOC,
R_PPC64_TOC16, and R_PPC64_TOC16DS).
The addition of 'undefinedExplicitRelSym' hook on 'MCELFObjectTargetWriter'
is meant to avoid the creation of an unreferenced ".TOC." symbol (used in
the .odp creation) as well to set the R_PPC64_TOC relocation target as the
temporary ".TOC." symbol. On PPC64 ABI, the R_PPC64_TOC relocation should
not point to any symbol.
llvm-svn: 166677
for the PowerPC target, and factoring the results. This will ease future
maintenance of both subtargets.
PPCTargetLowering::LowerCall_Darwin_Or_64SVR4() has grown a lot of special-case
code for the different ABIs, making maintenance difficult. This is getting
worse as we repair errors in the 64-bit ELF ABI implementation, while avoiding
changes to the Darwin ABI logic. This patch splits the routine into
LowerCall_Darwin() and LowerCall_64SVR4(), allowing both versions to be
significantly simplified. I've factored out chunks of similar code where it
made sense to do so. I also performed similar factoring on
LowerFormalArguments_Darwin() and LowerFormalArguments_64SVR4().
There are no functional changes in this patch, and therefore no new test
cases have been developed.
Built and tested on powerpc64-unknown-linux-gnu with no new regressions.
llvm-svn: 166480
test case on PowerPC caused by rounding errors when converting from a 64-bit
integer to a single-precision floating point. The reason for this are
double-rounding effects, since on PowerPC we have to convert to an
intermediate double-precision value first, which gets rounded to the
final single-precision result.
The patch fixes the problem by preparing the 64-bit integer so that the
first conversion step to double-precision will always be exact, and the
final rounding step will result in the correctly-rounded single-precision
result. The generated code sequence is equivalent to what GCC would generate.
When -enable-unsafe-fp-math is in effect, that extra effort is omitted
and we accept possible rounding errors (just like GCC does as well).
llvm-svn: 166178
The TargetTransform changes are breaking LTO bootstraps of clang. I am
working with Nadav to figure out the problem, but I am reverting it for now
to get our buildbots working.
This reverts svn commits: 165665 165669 165670 165786 165787 165997
and I have also reverted clang svn 165741
llvm-svn: 166168
For the PowerPC 64-bit ELF Linux ABI, aggregates of size less than 8
bytes are to be passed in the low-order bits ("right-adjusted") of the
doubleword register or memory slot assigned to them. A previous patch
addressed this for aggregates passed in registers. However, small
aggregates passed in the overflow portion of the parameter save area are
still being passed left-adjusted.
The fix is made in PPCTargetLowering::LowerCall_Darwin_Or_64SVR4 on the
caller side, and in PPCTargetLowering::LowerFormalArguments_64SVR4 on
the callee side. The main fix on the callee side simply extends
existing logic for 1- and 2-byte objects to 1- through 7-byte objects,
and correcting a constant left over from 32-bit code. There is also a
fix to a bogus calculation of the offset to the following argument in
the parameter save area.
On the caller side, again a constant left over from 32-bit code is
fixed. Additionally, some code for 1, 2, and 4-byte objects is
duplicated to handle the 3, 5, 6, and 7-byte objects for SVR4 only. The
LowerCall_Darwin_Or_64SVR4 logic is getting fairly convoluted trying to
handle both ABIs, and I propose to separate this into two functions in a
future patch, at which time the duplication can be removed.
The patch adds a new test (structsinmem.ll) to demonstrate correct
passing of structures of all seven sizes. Eight dummy parameters are
used to force these structures to be in the overflow portion of the
parameter save area.
As a side effect, this corrects the case when aggregates passed in
registers are saved into the first eight doublewords of the parameter
save area: Previously they were stored left-justified, and now are
properly stored right-justified. This requires changing the expected
output of existing test case structsinregs.ll.
llvm-svn: 166022
For function calls on the 64-bit PowerPC SVR4 target, each parameter
is mapped to as many doublewords in the parameter save area as
necessary to hold the parameter. The first 13 non-varargs
floating-point values are passed in registers; any additional
floating-point parameters are passed in the parameter save area. A
single-precision floating-point parameter (32 bits) must be mapped to
the second (rightmost, low-order) word of its assigned doubleword
slot.
Currently LLVM violates this ABI requirement by mapping such a
parameter to the first (leftmost, high-order) word of its assigned
doubleword slot. This is internally self-consistent but will not
interoperate correctly with libraries compiled with an ABI-compliant
compiler.
This patch corrects the problem by adjusting the parameter addressing
on both sides of the calling convention.
llvm-svn: 165714
the compiler makes use of GPR0. However, there are two flavors of
GPR0 defined by the target: the 32-bit GPR0 (R0) and the 64-bit GPR0
(X0). The spill/reload code makes use of R0 regardless of whether we
are generating 32- or 64-bit code.
This patch corrects the problem in the obvious manner, using X0 and
ADDI8 for 64-bit and R0 and ADDI for 32-bit.
llvm-svn: 165658
the Altivec extensions were introduced. Its use is optional, and
allows the compiler to communicate to the operating system which
vector registers should be saved and restored during a context switch.
In practice, this information is ignored by the various operating
systems using the SVR4 ABI; the kernel saves and restores the entire
register state. Setting the VRSAVE register is no longer performed by
the AIX XL compilers, the IBM i compilers, or by GCC on Power Linux
systems. It seems best to avoid this logic within LLVM as well.
This patch avoids generating code to update and restore VRSAVE for the
PowerPC SVR4 ABIs (32- and 64-bit). The code remains in place for the
Darwin ABI.
llvm-svn: 165656
We use the enums to query whether an Attributes object has that attribute. The
opaque layer is responsible for knowing where that specific attribute is stored.
llvm-svn: 165488
Vector compare using altivec 'vcmpxxx' instructions have as third argument
a vector register instead of CR one, different from integer and float-point
compares. This leads to a failure in code generation, where 'SelectSETCC'
expects a DAG with a CR register and gets vector register instead.
This patch changes the behavior by just returning a DAG with the
vector compare instruction based on the type. The patch also adds a testcase
for all vector types llvm defines.
It also included a fix on signed 5-bits predicates printing, where
signed values were not handled correctly as signed (char are unsigned by
default for PowerPC). This generates 'vspltisw' (vector splat)
instruction with SIM out of range.
llvm-svn: 165419
into separate versions for the Darwin and 64-bit SVR4 ABIs. This will
facilitate doing more major surgery on the 64-bit SVR4 ABI in the near future.
llvm-svn: 165336
"Instruction 'foo' has no tokens" errors during llvm-tblgen
-gen-asm-matcher attempts. At this time, the added
tokens are "#comment" style rather than the actual mnemonic. This will
be revisited once the rest of the base asmparser bits get straightened
out for ppc64-elf-linux.
llvm-svn: 165237
lib/Target/PowerPC/PPCISelLowering.{h,cpp}
Rename LowerFormalArguments_Darwin to LowerFormalArguments_Darwin_Or_64SVR4.
Rename LowerFormalArguments_SVR4 to LowerFormalArguments_32SVR4.
Receive small structs right-justified in LowerFormalArguments_Darwin_Or_64SVR4.
Rename LowerCall_Darwin to LowerCall_Darwin_Or_64SVR4.
Rename LowerCall_SVR4 to LowerCall_32SVR4.
Pass small structs right-justified in LowerCall_Darwin_Or_64SVR4.
test/CodeGen/PowerPC/structsinregs.ll
New test.
llvm-svn: 164228
- BlockAddress has no support of BA + offset form and there is no way to
propagate that offset into machine operand;
- Add BA + offset support and a new interface 'getTargetBlockAddress' to
simplify target block address forming;
- All targets are modified to use new interface and X86 backend is enhanced to
support BA + offset addressing.
llvm-svn: 163743
nonvolatile condition register fields across calls under the SVR4 ABIs.
* With the 64-bit ABI, the save location is at a fixed offset of 8 from
the stack pointer. The frame pointer cannot be used to access this
portion of the stack frame since the distance from the frame pointer may
change with alloca calls.
* With the 32-bit ABI, the save location is just below the general
register save area, and is accessed via the frame pointer like the rest
of the save areas. This is an optional slot, so it must only be created
if any of CR2, CR3, and CR4 were modified.
* For both ABIs, save/restore logic is generated only if one of the
nonvolatile CR fields were modified.
I also took this opportunity to clean up an extra FIXME in
PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless
for the 64-bit ABI, so I removed them for correctness and efficiency.
Fixes PR13708 and partially also PR13623. It lets us enable exception handling
on PPC64.
Patch by William J. Schmidt!
llvm-svn: 163713
- Darwin lied about not supporting .lcomm and turned it into zerofill in the
asm parser. Push the zerofill-conversion down into macho-specific code.
- This makes the tri-state LCOMMType enum superfluous, there are no targets
without .lcomm.
- Do proper error reporting when trying to use .lcomm with alignment on a target
that doesn't support it.
- .comm and .lcomm alignment was parsed in bytes on COFF, should be power of 2.
- Fixes PR13755 (.lcomm crashes on ELF).
llvm-svn: 163395
[Tobias von Koch] What's happening here is that the CR6SET/CR6UNSET is breaking the chain of register copies glued to the function call (BL_SVR4 node). The scheduler then moves other instructions in between those and the function call, which isn't good!
Right. That's the case where there is no chain of register copies before the call, so InFlag == 0... Attached is a new revision of the patch which should fix this for good.
llvm-svn: 162916
We need to reserve space for the mandatory traceback fields,
though leaving them as zero is appropriate for now.
Although the ABI calls for these fields to be filled in fully, no
compiler on Linux currently does this, and GDB does not read these
fields. GDB uses the first word of zeroes during exception handling to
find the end of the function and the size field, allowing it to compute
the beginning of the function. DWARF information is used for everything
else. We need the extra 8 bytes of pad so the size field is found in
the right place.
As a comparison, GCC fills in a few of the fields -- language, number
of saved registers -- but ignores the rest. IBM's proprietary OSes do
make use of the full traceback table facility.
Patch by Bill Schmidt.
llvm-svn: 162854
traceback table on PowerPC64. This helps gdb handle exceptions. The other
mandatory fields are ignored by gdb and harder to implement so just add
there a FIXME.
Patch by Bill Schmidt. PR13641.
llvm-svn: 162778
Slight reorganisation of PPC instruction classes for scheduling. No
functionality change for existing subtargets.
- Clearly separate load/store-with-update instructions from regular loads and stores.
- Split IntRotateD -> IntRotateD and IntRotateDI
- Split out fsub and fadd from FPGeneral -> FPAddSub
- Update existing itineraries
Patch by Tobias von Koch.
llvm-svn: 162729
Allow load-immediates to be rematerialised in the register coalescer for
PPC. This makes test/CodeGen/PowerPC/big-endian-formal-args.ll fail,
because it relies on a register move getting emitted. The immediate load is
equivalent, so change this test case.
Patch by Tobias von Koch.
llvm-svn: 162727
The 32-bit ABI requires CR bit 6 to be set if the call has fp arguments and
unset if it doesn't. The solution up to now was to insert a MachineNode to
set/unset the CR bit, which produces a CR vreg. This vreg was then copied
into CR bit 6. When the register allocator saw a bunch of these in the same
function, it allocated the set/unset CR bit in some random CR register (1
extra instruction) and then emitted CR moves before every vararg function
call, rather than just setting and unsetting CR bit 6 directly before every
vararg function call. This patch instead inserts a PPCcrset/PPCcrunset
instruction which are then matched by a dedicated instruction pattern.
Patch by Tobias von Koch.
llvm-svn: 162725
The zeroextend IR instruction is lowered to an 'and' node with an immediate
mask operand, which in turn gets legalised to a sequence of ori's & ands.
This can be done more efficiently using the rldicl instruction.
Patch by Tobias von Koch.
llvm-svn: 162724
This way of using getNextOperandForReg() was unlikely to work as
intended. We don't give any guarantees about the order of operands in
the use-def chains, so looking only at operands following a given
operand in the chain doesn't make sense.
llvm-svn: 161542
The MFTB instruction itself is being phased out, and its functionality
is provided by MFSPR. According to the ISA docs, using MFSPR works on all known
chips except for the 601 (which did not have a timebase register anyway)
and the POWER3.
Thanks to Adhemerval Zanella for pointing this out!
llvm-svn: 161346
On PPC64, this can be done with a simple TableGen pattern.
To enable this, I've added the (otherwise missing) readcyclecounter
SDNode definition to TargetSelectionDAG.td.
llvm-svn: 161302
Call instructions are no longer required to be variadic, and
variable_ops should only be used for instructions that encode a variable
number of arguments, like the ARM stm/ldm instructions.
llvm-svn: 160189
This is a preliminary step toward having TargetPassConfig be able to
start and stop the compilation at specified passes for unit testing
and debugging. No functionality change.
llvm-svn: 159567
include/llvm/Analysis/DebugInfo.h to include/llvm/DebugInfo.h.
The reasoning is because the DebugInfo module is simply an interface to the
debug info MDNodes and has nothing to do with analysis.
llvm-svn: 159312
up to r158925 were handled as processor specific. Making them
generic and putting tests for these modifiers in the CodeGen/Generic
directory caused a number of targets to fail.
This commit addresses that problem by having the targets call
the generic routine for generic modifiers that they don't currently
have explicit code for.
For now only generic print operands 'c' and 'n' are supported.vi
Affected files:
test/CodeGen/Generic/asm-large-immediate.ll
lib/Target/PowerPC/PPCAsmPrinter.cpp
lib/Target/NVPTX/NVPTXAsmPrinter.cpp
lib/Target/ARM/ARMAsmPrinter.cpp
lib/Target/XCore/XCoreAsmPrinter.cpp
lib/Target/X86/X86AsmPrinter.cpp
lib/Target/Hexagon/HexagonAsmPrinter.cpp
lib/Target/CellSPU/SPUAsmPrinter.cpp
lib/Target/Sparc/SparcAsmPrinter.cpp
lib/Target/MBlaze/MBlazeAsmPrinter.cpp
lib/Target/Mips/MipsAsmPrinter.cpp
MSP430 isn't represented because it did not even run with
the long existing 'c' modifier and it was not apparent what
needs to be done to get it inline asm ready.
Contributer: Jack Carter
llvm-svn: 159203
This patch adds DAG combines to form FMAs from pairs of FADD + FMUL or
FSUB + FMUL. The combines are performed when:
(a) Either
AllowExcessFPPrecision option (-enable-excess-fp-precision for llc)
OR
UnsafeFPMath option (-enable-unsafe-fp-math)
are set, and
(b) TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) is true for the type of
the FADD/FSUB, and
(c) The FMUL only has one user (the FADD/FSUB).
If your target has fast FMA instructions you can make use of these combines by
overriding TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) to return true for
types supported by your FMA instruction, and adding patterns to match ISD::FMA
to your FMA instructions.
llvm-svn: 158757
The PPC::EXTSW instruction preserves the low 32 bits of its input, just
like some of the x86 instructions. Use it to reduce register pressure
when the low 32 bits have multiple uses.
This requires a small change to PeepholeOptimizer since EXTSW takes a
64-bit input register.
This is related to PR5997.
llvm-svn: 158743
For processors with the G5-like instruction-grouping scheme, this helps avoid
early group termination due to a write-after-write dependency within the group.
It should also help on pipelined embedded cores.
On POWER7, over the test suite, this gives an average 0.5% speedup. The largest
speedups are:
SingleSource/Benchmarks/Stanford/Quicksort - 33%
MultiSource/Applications/d/make_dparser - 21%
MultiSource/Benchmarks/FreeBench/analyzer/analyzer - 12%
MultiSource/Benchmarks/MiBench/telecomm-FFT/telecomm-fft - 12%
Largest slowdowns:
SingleSource/Benchmarks/Stanford/Bubblesort - 23%
MultiSource/Benchmarks/Prolangs-C++/city/city - 21%
MultiSource/Benchmarks/BitBench/uuencode/uuencode - 16%
MultiSource/Benchmarks/mediabench/mpeg2/mpeg2dec/mpeg2decode - 13%
llvm-svn: 158719
This cleans up the method used to find trip counts in order to form CTR loops on PPC.
This refactoring allows the pass to find loops which have a constant trip count but also
happen to end with a comparison to zero. This also adds explicit FIXMEs to mark two different
classes of loops that are currently ignored.
In addition, we now search through all potential induction operations instead of just the first.
Also, we check the predicate code on the conditional branch and abort the transformation if the
code is not EQ or NE, and we then make sure that the branch to be transformed matches the
condition register defined by the comparison (multiple possible comparisons will be considered).
llvm-svn: 158607
POWER4 is a 64-bit CPU (better matched to the 970).
The g3 is really the 750 (no altivec), the g4+ is the 74xx (not the 750).
Patch by Andreas Tobler.
llvm-svn: 158363
Original commit message:
Move PPC host-CPU detection logic from PPCSubtarget into sys::getHostCPUName().
Both the new Linux functionality and the old Darwin functions have been moved.
This change also allows this information to be queried directly by clang and
other frontends (clang, for example, will now have real -mcpu=native support).
llvm-svn: 158349
Both the new Linux functionality and the old Darwin functions have been moved.
This change also allows this information to be queried directly by clang and
other frontends (clang, for example, will now have real -mcpu=native support).
llvm-svn: 158337
The PPC target feature gpul (IsGigaProcessor) was only used for one thing:
To enable the generation of the MFOCRF instruction. Furthermore, this
instruction is available on other PPC cores outside of the G5 line. This
feature now corresponds to the HasMFOCRF flag.
No functionality change.
llvm-svn: 158323
Over the entire test-suite, this has an insignificantly negative average
performance impact, but reduces some of the worst slowdowns from the
anti-dep. change (r158294).
Largest speedups:
SingleSource/Benchmarks/Stanford/Quicksort - 28%
SingleSource/Benchmarks/Stanford/Towers - 24%
SingleSource/Benchmarks/Shootout-C++/matrix - 23%
MultiSource/Benchmarks/SciMark2-C/scimark2 - 19%
MultiSource/Benchmarks/MiBench/automotive-bitcount/automotive-bitcount - 15%
(matrix and automotive-bitcount were both in the top-5 slowdown list from the
anti-dep. change)
Largest slowdowns:
MultiSource/Benchmarks/McCat/03-testtrie/testtrie - 28%
MultiSource/Benchmarks/mediabench/gsm/toast/toast - 26%
MultiSource/Benchmarks/MiBench/automotive-susan/automotive-susan - 21%
SingleSource/Benchmarks/CoyoteBench/lpbench - 20%
MultiSource/Applications/d/make_dparser - 16%
llvm-svn: 158296
Using 'all' instead of 'critical' would be better because it would make it easier to
satisfy the bundling constraints, but, as noted in the FIXME, that is currently not
possible with the crs.
This yields an average 1% speedup over the entire test suite (on Power 7). Largest speedups:
SingleSource/Benchmarks/Shootout-C++/moments - 40%
MultiSource/Benchmarks/McCat/03-testtrie/testtrie - 28%
SingleSource/Benchmarks/BenchmarkGame/nsieve-bits - 26%
SingleSource/Benchmarks/McGill/misr - 23%
MultiSource/Applications/JM/ldecod/ldecod - 22%
Largest slowdowns:
SingleSource/Benchmarks/Shootout-C++/matrix - -29%
SingleSource/Benchmarks/Shootout-C++/ary3 - -22%
MultiSource/Benchmarks/BitBench/uuencode/uuencode - -18%
SingleSource/Benchmarks/Shootout-C++/ary - -17%
MultiSource/Benchmarks/MiBench/automotive-bitcount/automotive-bitcount - -15%
llvm-svn: 158294
The PPC64 backend had patterns for i32 <-> i64 extensions and truncations that
would leave self-moves in the final assembly. Replacing those patterns with ones
based on the SUBREG builtins yields better-looking code.
Thanks to Jakob and Owen for their suggestions in this matter.
llvm-svn: 158283
Tail merging had been disabled on PPC because it would disturb bundling decisions
made during pre-RA scheduling on the 970 cores. Now, however, all bundling decisions
are made during post-RA scheduling, and tail merging is generally beneficial (the
average test-suite speedup is insignificantly positive).
Largest test-suite speedups:
MultiSource/Benchmarks/mediabench/gsm/toast/toast - 30%
MultiSource/Benchmarks/BitBench/uuencode/uuencode - 23%
SingleSource/Benchmarks/Shootout-C++/ary - 21%
SingleSource/Benchmarks/Stanford/Queens - 17%
Largest slowdowns:
MultiSource/Benchmarks/MiBench/security-sha/security-sha - 24%
MultiSource/Benchmarks/McCat/03-testtrie/testtrie - 22%
MultiSource/Applications/JM/ldecod/ldecod - 14%
MultiSource/Benchmarks/mediabench/g721/g721encode/encode - 9%
This is improved by using full (instead of just critical) anti-dependency breaking,
but doing so still causes miscompiles and so cannot yet be enabled by default.
llvm-svn: 158259
Thanks to Jakob's help, this now causes no new test suite failures!
Over the entire test suite, this gives an average 1% speedup. The largest speedups are:
SingleSource/Benchmarks/Misc/pi - 108%
SingleSource/Benchmarks/CoyoteBench/lpbench - 54%
MultiSource/Benchmarks/Prolangs-C/unix-smail/unix-smail - 50%
SingleSource/Benchmarks/Shootout/ary3 - 32%
SingleSource/Benchmarks/Shootout-C++/matrix - 30%
The largest slowdowns are:
MultiSource/Benchmarks/mediabench/gsm/toast/toast - -30%
MultiSource/Benchmarks/Prolangs-C/bison/mybison - -25%
MultiSource/Benchmarks/BitBench/uuencode/uuencode - -22%
MultiSource/Applications/d/make_dparser - -14%
SingleSource/Benchmarks/Shootout-C++/ary - -13%
In light of these slowdowns, additional profiling work is obviously needed!
llvm-svn: 158223
Marking these classes as non-alocatable allows CTR loop generation to
work correctly with the block placement passes, etc. These register
classes are currently used only by some unused TCRETURN patterns.
In future cleanup, these will be removed.
Thanks again to Jakob for suggesting this fix to the CTR loop problem!
llvm-svn: 158221
The pass itself works well, but the something in the Machine* infrastructure
does not understand terminators which define registers. Without the ability
to use the block-placement pass, etc. this causes performance regressions (and
so is turned off by default). Turning off the analysis turns off the problems
with the Machine* infrastructure.
llvm-svn: 158206
The code which tests for an induction operation cannot assume that any
ADDI instruction will have a register operand because the operand could
also be a frame index; for example:
%vreg16<def> = ADDI8 <fi#0>, 0; G8RC:%vreg16
llvm-svn: 158205
This pass is derived from the Hexagon HardwareLoops pass. The only significant enhancement over the Hexagon
pass is that PPCCTRLoops will also attempt to delete the replaced add and compare operations if they are
no longer otherwise used. Also, invalid preheader DebugLoc is not used.
llvm-svn: 158204
It seems that this no longer causes test suite failures on PPC64 (after r157159),
and often gives a performance benefit, so it can be enabled by default.
llvm-svn: 157911
to pass around a struct instead of a large set of individual values. This
cleans up the interface and allows more information to be added to the struct
for future targets without requiring changes to each and every target.
NV_CONTRIB
llvm-svn: 157479
The current code will generate a prologue which starts with something like:
mflr 0
stw 31, -4(1)
stw 0, 4(1)
stwu 1, -16(1)
But under the PPC32 SVR4 ABI, access to negative offsets from R1 is not allowed.
This was pointed out by Peter Bergner.
llvm-svn: 157133
The getPointerRegClass() hook can return register classes that depend on
the calling convention of the current function (ptr_rc_tailcall).
So far, we have been able to infer the calling convention from the
subtarget alone, but as we add support for multiple calling conventions
per target, that no longer works.
Patch by Yiannis Tsiouris!
llvm-svn: 156328
Krzysztof Parzyszek