Even though we previously correctly detected the multi-dimensional access
pattern for accesses with a certain base address, we only delinearized
non-affine accesses to this address. Affine accesses have not been touched and
remained as single dimensional accesses. The result was an inconsistent
description of accesses to the same array, with some being one dimensional and
some being multi-dimensional.
This patch ensures that all accesses are delinearized with the same
dimensionality as soon as a single one of them has been detected as non-affine.
While writing this patch, it became evident that the options
-polly-allow-nonaffine and -polly-detect-keep-going have not been properly
supported in case delinearization has been turned on. This patch adds relevant
test coverage and addresses these issues as well. We also added some more
documentation to the functions that are modified in this patch.
This fixes llvm.org/PR20123
Differential Revision: http://reviews.llvm.org/D5329
llvm-svn: 217728
At the moment we assume that only elements of identical size are stored/loaded
to a certain base pointer. This patch adds logic to the scop detection to verify
this.
Differential Revision: http://reviews.llvm.org/D5329
llvm-svn: 217727
We now verify that such functions are correctly detected even in combination
with delinearization. This change is added to ensure we have good test coverage
for the subsequent delinearization fix.
We also remove unnecessary instructions from the test case.
llvm-svn: 217664
This allows us to omit the GuardBB in front of created loops
if we can show the loop trip count is at least one. It also
simplifies the dominance relation inside the new created region.
A GuardBB (even with a constant branch condition) might trigger
false dominance errors during function verification.
Differential Revision: http://reviews.llvm.org/D5297
llvm-svn: 217525
Summary:
+ Refactor the runtime check (RTC) build function
+ Added helper function to create an PollyIRBuilder
+ Change the simplify region function to create not
only unique entry and exit edges but also enfore that
the entry edge is unconditional
+ Cleaned the IslCodeGeneration runOnScop function:
- less post-creation changes of the created IR
+ Adjusted and added test cases
Reviewers: grosser, sebpop, simbuerg, dpeixott
Subscribers: llvm-commits, #polly
Differential Revision: http://reviews.llvm.org/D5076
llvm-svn: 217508
This previous code added in r216842 most likely created unnecessary copies.
Reported-by: Duncan P. N. Exon Smith <dexonsmith@apple.com>
llvm-svn: 217507
It seems we added guards to check for non-existing std::map elements to make
sure they are default constructed before first accessed. Besides, the code
being wrong because of checking Context.NonAffineAccesses[BasePointer].size()
instead of Context.cound(BasePointer), such a check is also not necessary
as std::map takes care of this already.
From the std::map documentation:
"If k does not match the key of any element in the container, the function
inserts a new element with that key and returns a reference to its mapped value.
Notice that this always increases the container size by one, even if no mapped
value is assigned to the element (the element is constructed using its default
constructor)."
llvm-svn: 217506
The -e flag exits the script with a non-zero code if any subcommand
fails. This flag allows us to notice as early as possible if the
test was not properly regenerated using a command like:
$ create_ll.sh t.c && opt < t.ll -polly ...
The above pattern is useful when iteratively developing a test case
to guard against un-noticed syntax errors.
Differential Revision: http://reviews.llvm.org/D5276
llvm-svn: 217463
There was a bug in the IslAst which caused that no more outermost
parallel loops were detected/checked after a parallel outermost loop
of depth 1.
+ Test case attached
llvm-svn: 217452
Thanks to Clemens (hammacher@cs.uni-saarland.de) extension of the
arcanist unit test engine, we can run the llvm-lit tests automatically.
Similar to the linters, aracanist will run all tests for each uploaded
commit and asks the commiter for a statements in case unit tests fail.
To use this feature the unit test engine needs to find the polly build
directory. Currently we support the following setups:
$POLLY_BUILD_DIR (environment variable)
<root>/build
<root>.build
<root>-build
<root:s/src/build>
<cwd>
llvm-svn: 217396
This allows to link Polly's lit.site.cfg from the build into the src directory,
without having it removed by every 'git clean':
ln -s build/tools/polly/test/lit.site.cfg to src/tools/polly/test
Having this file in our src directory allows us to run llvm-lit on specific
test cases in the Polly test directory just by running 'llvm-lit test/case.ll'.
llvm-svn: 217336
In Polly we used to have a mix of test cases, some that used 'opt %s' and others
that used 'opt < %s'. We now change all to use 'opt < %s'. Piping in test files
is preferable as it does prevent temporary files to be written to disk. This
brings us in line with what is usus in LLVM.
llvm-svn: 216816
This replaces the use of %defaultOpts = '-basicaa -polly-prepare' with the
minimal set of passes necessary for a test to succeed. Of the test cases that
previously used %defaultOpts 76 test cases require none of these passes, 42
need -basicaa and only 2 need -polly-prepare. Our change makes this requirement
explicit.
In Polly many test cases have been using a macro '%defaultOpts' which run a
couple of preparing passes before the actual Polly test case. This macro was
introduced very early in the development of Polly and originally contained a
large set of canonicalization passes. However, as the need for additional
canonicalization passes makes test cases harder to understand and also more
fragile in terms of changes in such passes, we aim since a longer time to only
include the minimal set of passes necessary. This patch removes the last
leftovers from of %defaultOpts and brings our tests cases more in line to what
is usus in LLVM itself.
llvm-svn: 216815
Arcanist (arc) will now always run linters before uploading any new
commit to Phabricator. All errors/warnings (or their absence) will be
shown in the web interface together with a explanation by the commiter
(arcanist will ask the commiter if the build was not clean).
The linters include:
- clang-format
- spelling check
- permissions check (aka. chmod)
- filename check
- merge conflict marker check
Note, that their scope is sometimes limited (see .arclint for
details).
This commit also fixes all errors and warnings these linters reported,
namely:
- spelling mistakes and typos
- executable permissions for various text files
Differential Revision: http://reviews.llvm.org/D4916
llvm-svn: 215871
This will spill out information about LLVM-internals. However, in cases
where the name of the Value matches the name of the array in the source,
we provide more useful information. In cases where we spill internals,
the information still might help the user to pin down the correct
arrays.
The problem we face here is: The error is pinned to the debug location
of one of the offending values out of the alias set instead of all of them.
The more information we give the user about the set of aliasing
pointers the better.
llvm-svn: 215830
This reverts commit 215466 (and 215528, a trivial formatting fix).
The intention of these commits is a good one, but unfortunately they broke
our LNT buildbot:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly-codegen-isl
Several of the cleanup changes that have been combined in this 'fixup' are
trivial and could probably be committed as obvious changes without risking to
break the build. The remaining changes are little and it should be easy to
figure out what went wrong.
llvm-svn: 215817
This reverts commit 215684. The intention of the commit is great, but
unfortunately it seems to be the cause of 14 LNT test suite failures:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly/builds/116
To make our buildbots and performance testers green until this issue is solved,
we temporarily revert this commit.
llvm-svn: 215816
The support is limited to signed modulo access and condition
expressions with a constant right hand side, e.g., A[i % 2] or
A[i % 9]. Test cases are modified according to this new feature and
new test cases are added.
Differential Revision: http://reviews.llvm.org/D4843
llvm-svn: 215684
Store the llvm::Value pointers of the AliasSet instead of the AliasSet
itself.
We have to be careful about changed IR when the message is generated,
because the Value pointers might not exist anymore. This would render
the Diagnostic invalid. For now we just assert there.
Simply do not retreive a diagnostic message after the IR has changed
it's not valid information anyway.
llvm-svn: 215625
Remove the PoCC and ScopLib support from Polly as we do not have a
user/maintainer for it.
Differential Revision: http://reviews.llvm.org/D4871
llvm-svn: 215563
Use the explicit analysis if possible, only for splitBlock we will continue
to use the Pass * argument. This change allows us to remove the getAnalysis
calls from the code generation.
llvm-svn: 215121
There is no needed for neither 1-dimensional nor higher dimensional arrays to
require positive offsets in the outermost array dimension.
We originally introduced this assumption with the support for delinearizing
multi-dimensional arrays.
llvm-svn: 214665
+ Remove the class IslGenerator which duplicates the functionality of
IslExprBuilder.
+ Use the IslExprBuilder to create code for memory access relations.
+ Also handle array types during access creation.
+ Enable scev codegen for one of the transformed memory access tests,
thus access creation without canonical induction variables available.
+ Update one test case to the new output.
llvm-svn: 214659
The updated tests use a different context than the old ones did.
Other than that only their path and the code generation we use
changed.
llvm-svn: 214657
+ Split all reduction dependences and map them to the causing memory accesses.
+ Print the types & base addresses of broken reductions for each "reduction
parallel" marked loop (OpenMP style).
+ 3 test cases to show how reductions are now represented in the isl ast.
The mapping "(ast) loops -> broken reductions" is also needed to find the
memory accesses we need to privatize in a loop.
llvm-svn: 214489
The functions isParallel, isInnermostParallel and IsOutermostParallel in
IslAstInfo will now return true even in the presence of broken reductions.
To compensate for this change the negated result of isReductionParallel can
be used.
llvm-svn: 214488
+ Perform the parallelism check on the innermost loop only once.
+ Inline the markOpenmpParallel function.
+ Rename all IslAstUserPayload * into Payload to make it consistent.
llvm-svn: 214448
Whe we build the IslAst we visit for nodes (in pre and post order) as well as
user/domain nodes. As these two sets are non overlapping we do not need to
check if we annotated a node earlier when we visit it.
llvm-svn: 214170
Use the fact that if we visit a for node first in pre and next in post order
we know we did not visit any children, thus we found an innermost loop.
+ Test case for an innermost loop with a conditional inside
llvm-svn: 213870
+ Renamed context into build when it's the isl_ast_build
+ Use the IslAstInfo functions to extract the schedule of a node
+ Use the IslAstInfo functions to extract the build/context of a node
+ Move the payload struct into the IslAstInfo class
+ Use a constructor and destructor (also new and delete) to
allocate/initialize the payload struct
llvm-svn: 213792
Offer the static functions to extract information out of an IslAst for node
as members of IslAstInfo not as top level entities.
+ Refactor common code
+ Add isParallel and isReductionParallel
+ Rename IslAstUser to IslAstUserPayload to make it clear this is just a (or
the) payload struct.
llvm-svn: 213272
This pulls in a couple of minor cleanups in isl. More importantly, in
preparation of the upcoming LLVM releases this change brings us back on a
released version of isl.
llvm-svn: 213062
+ Introduced dependency type TYPE_TC_RED to represent the transitive closure
(& the reverse) of reduction dependences. These are used when we check for
reduction parallel loops.
+ Test cases including loop reversals and modulo schedules which compute
reductions in a alternated order.
llvm-svn: 213019
We move back to a simple approach where the liveout is the last must-write
statement for a data-location plus all may-write statements. The previous
approach did not work out. We would have to consider per-data-access
dependences, instead of per-statement dependences to correct it. As this adds
complexity and it seems we would not gain anything over the simpler approach
that we implement in this commit, I moved us back to the old approach of
computing the liveout, but enhanced it to also add may-write accesses.
We also fix the test case and explain why we can not perform dead code
elimination in this case.
llvm-svn: 212925
As our delinearization works optimistically, we need in some cases run-time
checks that verify our optimistic assumptions. A simple example is the
following code:
void foo(long n, long m, long o, double A[n][m][o]) {
for (long i = 0; i < 100; i++)
for (long j = 0; j < 150; j++)
for (long k = 0; k < 200; k++)
A[i][j][k] = 1.0;
}
After clang linearized the access to A and we delinearized it again to
A[i][j][k] we need to ensure that we do not access the delinearized array
out of bounds (this information is not available in LLVM-IR). Hence, we
need to verify the following constraints at run-time:
CHECK: Assumed Context:
CHECK: [o, m] -> { : m >= 150 and o >= 200 }
llvm-svn: 212198
To translate the old induction variables as they exist before Polly to new
new induction variables introduced during AST code generation we need to
generate code that computes the new values from the old ones. We can do this
by just looking at the arguments isl generates in each scheduled statement.
Example:
// Old
for i
S(i)
// New
for c0
for c1
S(c0 + c1)
To get the value of i, we need to compute 'c0 + c1'. This expression is readily
available in the user statements generated by isl and just needs to be
translated to LLVM-IR.
This replaces an old confusing construct that constructed during ast generation
an isl multi affine expression that described this relation and which was then
again ast generated for each statement and argument when translating the isl ast
to LLVM-IR. This approach was difficult to understand and the additional ast
generation calls where entirely redundant as isl provides the relevant
expressions as arguments of the generated user statements.
llvm-svn: 212186
This change is particularly useful in the code generation as we need
to know which binary operator/identity element we need to combine/initialize
the privatization locations.
+ Print the reduction type for each memory access
+ Adjusted the test cases to comply with the new output format and
to test for the right reduction type
llvm-svn: 212126
Iterate over all store memory accesses and check for valid binary reduction
candidate loads by following the operands of the stored value. For each
candidate pair we check if they have the same base address and there are no
other accesses which may overlap with them. This ensures that no intermediate
value can escape into other memory locations or is overwritten at some point.
+ 17 test cases for reduction detection and reduction dependency modeling
llvm-svn: 211957
Enabling -keep-going in ScopDetection causes expansion to an invalid
Scop candidate.
Region A <- Valid candidate
|
Region B <- Invalid candidate
If -keep-going is enabled, ScopDetection would expand A to A+B because
the RejectLog is never checked for errors during expansion.
With this patch only A becomes a valid Scop.
llvm-svn: 211875
Tobias Grosser