The target was marking SIGN_EXTEND as Custom because it wanted to optimize
certain sign-extended shifts. In all other respects the extension is Legal,
so it'd be better to do the optimization in PerformDAGCombine instead.
No functional change intended.
llvm-svn: 203234
This helps the instruction selector to lower an i64 * i64 -> i128
multiplication into a single instruction on targets which support it.
Patch by Manuel Jacob.
llvm-svn: 203230
Sequences of insertelement/extractelements are sometimes used to build
vectorsr; this code tries to put them back together into shuffles, but
could only produce a completely uniform shuffle types (<N x T> from two
<N x T> sources).
This should allow shuffles with different numbers of elements on the
input and output sides as well.
llvm-svn: 203229
Summary:
llvm/MC/MCSectionMachO.h and llvm/Support/MachO.h both had the same
definitions for the section flags. Instead, grab the definitions out of
support.
No functionality change.
Reviewers: grosbach, Bigcheese, rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2998
llvm-svn: 203211
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
llvm-svn: 203204
That was overly aggressive in assuming that we could always assume COFF. Some
of the tests assume that they will get ELF rather than COFF even on Windows
where the default is COFF.
llvm-svn: 203176
This is a preliminary setup change to support a renaming of Windows target
triples. Split the object file format information out of the environment into a
separate entity. Unfortunately, file format was previously treated as an
environment with an unknown OS. This is most obvious in the ARM subtarget where
the handling for macho on an arbitrary platform switches to AAPCS rather than
APCS (as per Apple's needs).
llvm-svn: 203160
Windows always uses COFF unless Windows ELF is in use. Rather than checking if
Windows, MinGW, or Cygwin is being targeted, just check if the target OS is
windows and that it is not an ELF environment.
llvm-svn: 203159
This patch teaches the DAGCombiner how to fold a binary OR between two
shufflevector into a single shuffle vector when possible.
The rules are:
1. fold (or (shuf A, V_0, MA), (shuf B, V_0, MB)) -> (shuf A, B, Mask1)
2. fold (or (shuf A, V_0, MA), (shuf B, V_0, MB)) -> (shuf B, A, Mask2)
The DAGCombiner can take advantage of the fact that OR is commutative and
compute two possible shuffle masks (Mask1 and Mask2) for the resulting
shuffle node.
Before folding a dag according to either rule 1 or 2, DAGCombiner verifies
that the resulting shuffle mask is legal for the target.
DAGCombiner would firstly try to fold according to 1.; If not possible
then it will try to fold according to 2.
If both Mask1 and Mask2 are illegal then we conservatively don't fold
the OR instruction.
llvm-svn: 203156
This reverts commits r203136, r203137, and r203138.
This code doesn't build on Windows. Even on Vista+, Windows requires
elevated privileges to create a symlink. Therefore we can't use
symlinks in the compiler. We'll have to find another approach.
llvm-svn: 203143
There was a race where:
- The LockFileManager tries to own the lock file and fails.
- The other owner then releases and removes the lock file.
- The LockFileManager tries to read the owner info from the lock file but fails now.
In such a case have LockFileManager try to get ownership again, instead of error'ing out.
llvm-svn: 203138
Hard links do not work on SMB network directories, and it causes us to fail
to build clang module files if the module cache is in such a directory.
rdar://15944959
llvm-svn: 203137
Summary:
This provides support for CP and DP relative global accesses in inline
asm.
Reviewers: robertlytton
Reviewed By: robertlytton
Differential Revision: http://llvm-reviews.chandlerc.com/D2943
llvm-svn: 203129
for the Cortex-A53 subtarget in the AArch64 backend.
This patch lays the ground work to annotate each AArch64 instruction
(no NEON yet) with a list of SchedReadWrite types. The patch also
provides the Cortex-A53 processor resources, maps those the the default
SchedReadWrites, and provides basic latency. NEON support will be added
in a subsequent patch with proper forwarding logic.
Verification was done by setting the pre-RA scheduler to linearize to
better gauge the effect of the MIScheduler. Even without modeling the
forward logic, the results show a modest improvement for Cortex-A53.
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
llvm-svn: 203125
Just the simple cases for now. There were a few knock-on changes of
MachineBasicBlock *s to MachineBasicBlock &s. No functional change intended.
llvm-svn: 203105
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
llvm-svn: 203083
This is consistent with GDB ToT and reduces the number of relocations in
(type and compile) units, substantially reducing relocations and debug
size in fission + type units builds.
llvm-svn: 203082
implementation already lived.
After this commit, the only IR-library headers in include/llvm/* are
ones related to the legacy pass infrastructure that I'm planning to
leave there until the new one is farther along.
The only other headers at the top level are linking and initialization
aids that aren't really libraries but just headers.
llvm-svn: 203069
The global base register cannot be r0 because it might end up as the first
argument to addi or addis. Fixes PR18316.
I don't have a small stable test case.
llvm-svn: 203054
pointed to by the attribute, rather than the form as a first
step to determining how to hash the values. No functional change
intended.
llvm-svn: 203044
When copying an i1 value into a GPR for a vaarg call, we need to explicitly
zero-extend the i1 value (otherwise an invalid CRBIT -> GPR copy will be
generated).
llvm-svn: 203041
This works by moving the existing code into the DIEValue hierarchy
and using the DwarfDebug pointer off of the AsmPrinter to access
any global information we need.
llvm-svn: 203033
This enables us to figure out where in the debug_loc section our
locations are so that we can eventually hash them. It also helps
remove some special case code in emission. No functional change.
llvm-svn: 203018
On cores without fpcvt support, we cannot promote int_to_fp i1 operations,
because there is nothing to promote them to. The most straightforward
implementation of this uses a select to choose between the two possible
resulting floating-point values (and that's what is done here).
llvm-svn: 203015
Provide triple and data layout as well as module names (or empty string) when there's a mismatch.
Differential Revision: http://llvm-reviews.chandlerc.com/D2971
llvm-svn: 203009
Before llvm-mc would print it, but llc was assuming that it would produce
another section changing directive before one was needed. That assumption is
false with inline asm.
Fixes PR19049.
Another option would be to always create the section, but in the asm printer
avoid printing sections changes during initialization. That would work, but
* We do use the fact that llvm-mc prints it in testing. The tests can be changed
if needed.
* A quick poll on IRC suggest that most developers prefer the implicit .text to
be printed.
llvm-svn: 203001
When using a //net/ path, we were transforming the trailing / into a '.'
when the path was just the root path and we were iterating backwards.
Forwards iteration and other kinds of root path (C:\, /) were already
correct.
llvm-svn: 202999
already lived there and it is where it belongs -- this is the in-memory
debug location representation.
This is just cleanup -- Modules can actually cope with this, but that
doesn't make it right. After chatting with folks that have out-of-tree
stuff, going ahead and moving the rest of the headers seems preferable.
llvm-svn: 202960
This will allow external callers of these functions to switch over time
rather than forcing a breaking change all a once. These particular
functions were determined by building clang/lld/lldb.
llvm-svn: 202959
to ensure we don't mess up any of the overrides. Necessary for cleaning
up the Value use iterators and enabling range-based traversing of use
lists.
llvm-svn: 202958
Patchpoints already did this. Doing it for stackmaps is a convenience
for the runtime in the event that it needs to scratch register to
patch or perform a runtime call thunk.
Unlike patchpoints, we just assume the AnyRegCC calling
convention. This is the only language and target independent calling
convention specific to stackmaps so makes sense. Although the calling
convention is not currently used to select the scratch registers.
llvm-svn: 202943
selection dag (PR19012)
In X86SelectionDagInfo::EmitTargetCodeForMemcpy we check with MachineFrameInfo
to make sure that ESI isn't used as a base pointer register before we choose to
emit rep movs (which clobbers esi).
The problem is that MachineFrameInfo wouldn't know about dynamic allocas or
inline asm that clobbers the stack pointer until SelectionDAGBuilder has
encountered them.
This patch fixes the problem by checking for such things when building the
FunctionLoweringInfo.
Differential Revision: http://llvm-reviews.chandlerc.com/D2954
llvm-svn: 202930
using a full uint16_t with the flag value... which happens to be
0 or 1. Update the class for bool values and rename functions slightly.
llvm-svn: 202921
Currently this code is duplicated across visitSHL, visitSRA and visitSRL. The
plan is to add rotates as clients to this new function.
There is no functional change intended here.
llvm-svn: 202908
This is required to include MSVC's <atomic> header, which we do now in
LLVM.
Tests forthcoming in Clang, since that's where we test semantic inline
asm changes.
llvm-svn: 202865
Previously for:
tail call void inttoptr (i64 65536 to void ()*)() nounwind
We would emit:
bl 65536
The immediate operand of the bl instruction is a relative offset so it is
wrong to use the absolute address here.
llvm-svn: 202860
Summary:
Previously, attempting to extract lanes 2 and 3 would actually extract lane 1.
The MSA CodeGen tests only covered lanes 0 and 1.
Differential Revision: http://llvm-reviews.chandlerc.com/D2935
llvm-svn: 202848
source file had already been moved. Also move the unittest into the IR
unittest library.
This may seem an odd thing to put in the IR library but we only really
use this with instructions and it needs the LLVM context to work, so it
is intrinsically tied to the IR library.
llvm-svn: 202842
a bit surprising, as the class is almost entirely abstracted away from
any particular IR, however it encodes the comparsion predicates which
mutate ranges as ICmp predicate codes. This is reasonable as they're
used for both instructions and constants. Thus, it belongs in the IR
library with instructions and constants.
llvm-svn: 202838
this would have been required because of the use of DataLayout, but that
has moved into the IR proper. It is still required because this folder
uses the constant folding in the analysis library (which uses the
datalayout) as the more aggressive basis of its folder.
llvm-svn: 202832
directly care about the Value class (it is templated so that the key can
be any arbitrary Value subclass), it is in fact concretely tied to the
Value class through the ValueHandle's CallbackVH interface which relies
on the key type being some Value subclass to establish the value handle
chain.
Ironically, the unittest is already in the right library.
llvm-svn: 202824
Move the test for this class into the IR unittests as well.
This uncovers that ValueMap too is in the IR library. Ironically, the
unittest for ValueMap is useless in the Support library (honestly, so
was the ValueHandle test) and so it already lives in the IR unittests.
Mmmm, tasty layering.
llvm-svn: 202821
name might indicate, it is an iterator over the types in an instruction
in the IR.... You see where this is going.
Another step of modularizing the support library.
llvm-svn: 202815
business.
This header includes Function and BasicBlock and directly uses the
interfaces of both classes. It has to do with the IR, it even has that
in the name. =] Put it in the library it belongs to.
This is one step toward making LLVM's Support library survive a C++
modules bootstrap.
llvm-svn: 202814
out-of-line so that it can refer to the methods on User. As
a consequence, this removes the need to define one template method if
value_use_iterator in the extremely strange User.h header (!!!).
This makse Use.h slightly less peculiar. The only remaining real
peculiarity is the definition of Use::set in Value.h
llvm-svn: 202805
inconsistent both with itself and with LLVM at large with formatting.
The *s were on the wrong side, the indent was off, etc etc. This is much
cleaner.
Also, go clang-format laying out the array of tags in nice columns.
llvm-svn: 202799
for the Cortex-A53 subtarget in the AArch64 backend.
This patch lays the ground work to annotate each AArch64 instruction
(no NEON yet) with a list of SchedReadWrite types. The patch also
provides the Cortex-A53 processor resources, maps those the the default
SchedReadWrites, and provides basic latency. NEON support will be added
in a subsequent patch with proper forwarding logic.
Verification was done by setting the pre-RA scheduler to linearize to
better gauge the effect of the MIScheduler. Even without modeling the
forward logic, the results show a modest improvement for Cortex-A53.
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
llvm-svn: 202767
DWARF discriminators are used to distinguish multiple control flow paths
on the same source location. When this happens, instructions across
basic block boundaries will share the same debug location.
This pass detects this situation and creates a new lexical scope to one
of the two instructions. This lexical scope is a child scope of the
original and contains a new discriminator value. This discriminator is
then picked up from MCObjectStreamer::EmitDwarfLocDirective to be
written on the object file.
This fixes http://llvm.org/bugs/show_bug.cgi?id=18270.
llvm-svn: 202752
remove_if that its predicate is adaptable. We don't actually need this,
we can write a generic adapter for any predicate.
This lets us remove some very wrong std::function usages. We should
never be using std::function for predicates to algorithms. This incurs
an *indirect* call overhead for every evaluation of the predicate, and
makes it very hard to inline through.
llvm-svn: 202742
Breaks the MSVC build.
DataStream.cpp(44): error C2552: 'llvm::Statistic::Value' : non-aggregates cannot be initialized with initializer list
llvm-svn: 202731
With C++11 we finally have a standardized way to specify atomic operations. Use
them to replace the existing custom implemention. Sadly the translation is not
entirely trivial as std::atomic allows more fine-grained control over the
atomicity. I tried to preserve the old semantics as well as possible.
Differential Revision: http://llvm-reviews.chandlerc.com/D2915
llvm-svn: 202730
Summary:
Parts of the compiler still believed MSA load/stores have a 16-bit offset when
it is actually 10-bit. Corrected this, and fixed a closely related issue this
uncovered where load/stores with 10-bit and 12-bit offsets (MSA and microMIPS
respectively) could not load/store using offsets from the stack/frame pointer.
They accepted frameindex+offset, but not frameindex by itself.
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2888
llvm-svn: 202717
This fixes invalid lengths in .debug_aranges on big-endian mips64
(lengths appear to be left-shifted by 32 bits) and in .debug_loc.
Differential Revision: http://llvm-reviews.chandlerc.com/D2517
llvm-svn: 202716
operand_values. The first provides a range view over operand Use
objects, and the second provides a range view over the Value*s being
used by those operands.
The naming is "STL-style" rather than "LLVM-style" because we have
historically named iterator methods STL-style, and range methods seem to
have far more in common with their iterator counterparts than with
"normal" APIs. Feel free to bikeshed on this one if you want, I'm happy
to change these around if people feel strongly.
I've switched code in SROA and LCG to exercise these mostly to ensure
they work correctly -- we don't really have an easy way to unittest this
and they're trivial.
llvm-svn: 202687
Now that the PowerPC backend can track individual CR bits as first-class
registers, we should also have a way of allocating them for inline asm
statements. Because these registers are only one bit, if an output variable is
implicitly cast to a larger integer size, we'll get an any_extend to that
larger type (this is part of the existing target-independent logic). As a
result, regardless of the size of the output type, only the first bit is
meaningful.
The constraint identifier "wc" has been chosen for this purpose. Although gcc
does not currently support allocating individual CR bits, this identifier
choice has been coordinated with the gcc PowerPC team, and will be marked as
reserved for this purpose in the gcc constraints.md file.
llvm-svn: 202657
This generalizes the code to eliminate extra truncs/exts around i1 bit
operations to also do the same on PPC64 for i32 bit operations. This eliminates
a fairly prevalent code wart:
int foo(int a) {
return a == 5 ? 7 : 8;
}
On PPC64, because of the extension implied by the ABI, this would generate:
cmplwi 0, 3, 5
li 12, 8
li 4, 7
isel 3, 4, 12, 2
rldicl 3, 3, 0, 32
blr
where the 'rldicl 3, 3, 0, 32', the extension, is completely unnecessary. At
least for the single-BB case (which is all that the DAG combine mechanism can
handle), this unnecessary extension is no longer generated.
llvm-svn: 202600
lib/Support/RWMutex.cpp contains an implementation of RWMutex that
uses pthread_rwlock, but when pthread_rwlock is not available (such as
under NaCl, when using newlib), it silently falls back to using the
no-op definition in lib/Support/Unix/RWMutex.inc, which is not
thread-safe.
Fix this case to be thread-safe by using a normal mutex.
Differential Revision: http://llvm-reviews.chandlerc.com/D2892
llvm-svn: 202570
Inside iterate, we scan backwards then scan forwards in a loop. When iteration
is not zero, the last node was just updated so we can skip it. But when
iteration is zero, we can't skip the last node.
For the testing case, fixing this will save a spill and move register copies
from hot path to cold path.
llvm-svn: 202557
The previous PBQP solver was very robust but consumed a lot of memory,
performed a lot of redundant computation, and contained some unnecessarily tight
coupling that prevented experimentation with novel solution techniques. This new
solver is an attempt to address these shortcomings.
Important/interesting changes:
1) The domain-independent PBQP solver class, HeuristicSolverImpl, is gone.
It is replaced by a register allocation specific solver, PBQP::RegAlloc::Solver
(see RegAllocSolver.h).
The optimal reduction rules and the backpropagation algorithm have been extracted
into stand-alone functions (see ReductionRules.h), which can be used to build
domain specific PBQP solvers. This provides many more opportunities for
domain-specific knowledge to inform the PBQP solvers' decisions. In theory this
should allow us to generate better solutions. In practice, we can at least test
out ideas now.
As a side benefit, I believe the new solver is more readable than the old one.
2) The solver type is now a template parameter of the PBQP graph.
This allows the graph to notify the solver of any modifications made (e.g. by
domain independent rules) without the overhead of a virtual call. It also allows
the solver to supply policy information to the graph (see below).
3) Significantly reduced memory overhead.
Memory management policy is now an explicit property of the PBQP graph (via
the CostAllocator typedef on the graph's solver template argument). Because PBQP
graphs for register allocation tend to contain many redundant instances of
single values (E.g. the value representing an interference constraint between
GPRs), the new RASolver class uses a uniquing scheme. This massively reduces
memory consumption for large register allocation problems. For example, looking
at the largest interference graph in each of the SPEC2006 benchmarks (the
largest graph will always set the memory consumption high-water mark for PBQP),
the average memory reduction for the PBQP costs was 400x. That's times, not
percent. The highest was 1400x. Yikes. So - this is fixed.
"PBQP: No longer feasting upon every last byte of your RAM".
Minor details:
- Fully C++11'd. Never copy-construct another vector/matrix!
- Cute tricks with cost metadata: Metadata that is derived solely from cost
matrices/vectors is attached directly to the cost instances themselves. That way
if you unique the costs you never have to recompute the metadata. 400x less
memory means 400x less cost metadata (re)computation.
Special thanks to Arnaud de Grandmaison, who has been the source of much
encouragement, and of many very useful test cases.
This new solver forms the basis for future work, of which there's plenty to do.
I will be adding TODO notes shortly.
- Lang.
llvm-svn: 202551
during the finalization for CGDebugInfo in clang we would RAUW
a type and it would result in a corrupted MDNode for an
imported declaration.
Testcase pending as reducing has been difficult.
llvm-svn: 202540
Tools that use the CommandLine library currently exit with an error
when invoked with -version or -help. This is unusual and non-standard,
so we'll fix them to exit successfully instead.
I don't expect that anyone relies on the current behaviour, so this
should be a fairly safe change.
llvm-svn: 202530
X86Operand is extracted into individual header, because it allows to create an
arbitrary memory operand and append it to MCInst. It'll be reused in X86 inline
assembly instrumentation.
Patch by Yuri Gorshenin.
llvm-svn: 202496
* Align targets of indirect jumps to instruction bundle boundaries (in MI layer).
* Add masking instructions before indirect jumps (in MC layer).
Differential Revision: http://llvm-reviews.chandlerc.com/D2847
llvm-svn: 202479
A 'remark' is information that is not an error or a warning, but rather some
additional information provided to the user. In contrast to a 'note' a 'remark'
is an independent diagnostic, whereas a 'note' always depends on another
diagnostic.
A typical use case for remark nodes is information provided to the user, e.g.
information provided by the vectorizer about loops that have been vectorized.
llvm-svn: 202474
The PPC isel instruction can fold 0 into the first operand (thus eliminating
the need to materialize a zero-containing register when the 'true' result of
the isel is 0). When the isel is fed by a bit register operation that we can
invert, do so as part of the bit-register-operation peephole routine.
llvm-svn: 202469
The CR bit tracking code broke PPC/Darwin; trying to get it working again...
(the darwin11 builder, which defaults to the darwin ABI when running PPC tests,
asserted when running test/CodeGen/PowerPC/inverted-bool-compares.ll)
llvm-svn: 202459
This change enables tracking i1 values in the PowerPC backend using the
condition register bits. These bits can be treated on PowerPC as separate
registers; individual bit operations (and, or, xor, etc.) are supported.
Tracking booleans in CR bits has several advantages:
- Reduction in register pressure (because we no longer need GPRs to store
boolean values).
- Logical operations on booleans can be handled more efficiently; we used to
have to move all results from comparisons into GPRs, perform promoted
logical operations in GPRs, and then move the result back into condition
register bits to be used by conditional branches. This can be very
inefficient, because the throughput of these CR <-> GPR moves have high
latency and low throughput (especially when other associated instructions
are accounted for).
- On the POWER7 and similar cores, we can increase total throughput by using
the CR bits. CR bit operations have a dedicated functional unit.
Most of this is more-or-less mechanical: Adjustments were needed in the
calling-convention code, support was added for spilling/restoring individual
condition-register bits, and conditional branch instruction definitions taking
specific CR bits were added (plus patterns and code for generating bit-level
operations).
This is enabled by default when running at -O2 and higher. For -O0 and -O1,
where the ability to debug is more important, this feature is disabled by
default. Individual CR bits do not have assigned DWARF register numbers,
and storing values in CR bits makes them invisible to the debugger.
It is critical, however, that we don't move i1 values that have been promoted
to larger values (such as those passed as function arguments) into bit
registers only to quickly turn around and move the values back into GPRs (such
as happens when values are returned by functions). A pair of target-specific
DAG combines are added to remove the trunc/extends in:
trunc(binary-ops(binary-ops(zext(x), zext(y)), ...)
and:
zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...)
In short, we only want to use CR bits where some of the i1 values come from
comparisons or are used by conditional branches or selects. To put it another
way, if we can do the entire i1 computation in GPRs, then we probably should
(on the POWER7, the GPR-operation throughput is higher, and for all cores, the
CR <-> GPR moves are expensive).
POWER7 test-suite performance results (from 10 runs in each configuration):
SingleSource/Benchmarks/Misc/mandel-2: 35% speedup
MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup
MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup
SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup
SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup
SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup
SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown
MultiSource/Applications/lemon/lemon: 8% slowdown
llvm-svn: 202451
This extract-and-trunc vector optimization cannot work for i1 values as
currently implemented, and so I'm disabling this for now for i1 values. In the
future, this can be fixed properly.
Soon I'll commit support for i1 CR bit tracking in the PowerPC backend, and
this will be covered by one of the existing regression tests.
llvm-svn: 202449
This is a temporary workaround for native arm linux builds:
PR18996: Changing regalloc order breaks "lencod" on native arm linux builds.
llvm-svn: 202433
scan the register file for sub- and super-registers.
No functionality change intended.
(Tests are updated because the comments in the assembler output are
different.)
llvm-svn: 202416
If a function returns a large struct by value return the first 4 words
in registers and the rest on the stack in a location reserved by the
caller. This is needed to support the xC language which supports
functions returning an arbitrary number of return values. This is
r202397 reapplied with a fix to avoid an uninitialized read of a member.
llvm-svn: 202414
Summary:
If a function returns a large struct by value return the first 4 words
in registers and the rest on the stack in a location reserved by the
caller. This is needed to support the xC language which supports
functions returning an arbitrary number of return values.
Reviewers: robertlytton
Reviewed By: robertlytton
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2889
llvm-svn: 202397
Summary:
If the src, dst and size of a memcpy are known to be 4 byte aligned we
can call __memcpy_4() instead of memcpy().
Reviewers: robertlytton
Reviewed By: robertlytton
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2871
llvm-svn: 202395
any ranges - this includes CU ranges where we were previously emitting an
end list marker even if we didn't have a list.
Testcase includes a test for line table only code emission as the problem
was noticed while writing this test.
llvm-svn: 202357
If the SI_KILL operand is constant, we can either clear the exec mask if
the operand is negative, or do nothing otherwise.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 202337
any ranges to the list of ranges for the CU as we don't want to emit
them anyway. This ensures that we will still emit ranges if we have
a compile unit compiled with only line tables and one compiled with
full debug info requested (we'll emit for the one with full debug info).
Update testcase metadata accordingly to continue emitting ranges.
llvm-svn: 202333
and update everything accordingly. This can be used to conditionalize
the amount of output in the backend based on the amount of debug
requested/metadata emission scheme by a front end (e.g. clang).
Paired with a commit to clang.
llvm-svn: 202332
David Majnemer