cli-wrapper-mpxtable.cpp was emitting warnings from printfs of
uint64_t on 32 bit arm build. This patch makes affected printfs
in cli-wrapper-mpxtable.cpp portable accross targets variants.
When the number of shared libs is massive, there could be hundreds of
thousands of short lived progress events sent to the IDE, which makes it
irresponsive while it's processing all this data. As these small jobs
take less than a second to process, the user doesn't even see them,
because the IDE only display the progress of long operations. So it's
better not to send these events.
I'm fixing that by sending only the events that are taking longer than 5
seconds to process.
In a specific run, I got the number of events from ~500k to 100, because
there was only 1 big lib to parse.
I've tried this on several small and massive targets, and it seems to
work fine.
Differential Revision: https://reviews.llvm.org/D101128
A few users recently were trying to set environment values when using lldb-vscode and were unsure of the format of the "env" launch configuration setting. Clarify the exact format as when users add the "env" launch config setting, they can see this help string in the IDE.
Differential Revision: https://reviews.llvm.org/D104578
Add a new feature to process save-core on Darwin systems -- for
lldb to create a user process corefile with only the dirty (modified
memory) pages included. All of the binaries that were used in the
corefile are assumed to still exist on the system for the duration
of the use of the corefile. A new --style option to process save-core
is added, so a full corefile can be requested if portability across
systems, or across time, is needed for this corefile.
debugserver can now identify the dirty pages in a memory region
when queried with qMemoryRegionInfo, and the size of vm pages is
given in qHostInfo.
Create a new "all image infos" LC_NOTE for Mach-O which allows us
to describe all of the binaries that were loaded in the process --
load address, UUID, file path, segment load addresses, and optionally
whether code from the binary was executing on any thread. The old
"read dyld_all_image_infos and then the in-memory Mach-O load
commands to get segment load addresses" no longer works when we
only have dirty memory.
rdar://69670807
Differential Revision: https://reviews.llvm.org/D88387
When the number of shared libs is massive, there could be hundreds of
thousands of short lived progress events sent to the IDE, which makes it
irresponsive while it's processing all this data. As these small jobs
take less than a second to process, the user doesn't even see them,
because the IDE only display the progress of long operations. So it's
better not to send these events.
I'm fixing that by sending only the events that are taking longer than 5
seconds to process.
In a specific run, I got the number of events from ~500k to 100, because
there was only 1 big lib to parse.
I've tried this on several small and massive targets, and it seems to
work fine.
Differential Revision: https://reviews.llvm.org/D101128
If an inferior exits prior to the processing of a disconnect request,
then the threads executing EventThreadFunction and request_discontinue
respectively may call SendTerminatedEvent simultaneously, in turn,
testing and/or setting g_vsc.sent_terminated_event without any
synchronization. In case the thread executing EventThreadFunction sets
it before the thread executing request_discontinue has had a chance to
test it, the latter would move ahead to issue a response to the
disconnect request. Said response may be dispatched ahead of the
terminated event compelling the client to terminate the debug session
without consuming any console output that might've been generated by
the execution of terminateCommands.
Reviewed By: clayborg, wallace
Differential Revision: https://reviews.llvm.org/D103609
Now that LLDB proper has built-in support for intel-pt traces, we can remove the old plugin written by Intel. It has less features and it's hard to work with.
As a test, I ran "ninja lldbIntelFeatures" and it worked.
Differential Revision: https://reviews.llvm.org/D102866
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
The dyld SPI used by debugserver (_dyld_process_info_create) has become
much slower in macOS BigSur 11.3 causing a significant performance
regression when attaching. This commit mitigates that by caching the
result when calling the SPI to compute the platform.
Differential revision: https://reviews.llvm.org/D102833
A debugserver launched x86_64 cannot control an arm64/arm64e
process on an Apple Silicon system. Warn when this situation
has happened and return an error for the most common case of
attach. I think there will be refinements to this in the
future, but start out by making it easy to spot the problem
when it happens.
rdar://76630595
The lack of a dot before the suffix is intentional, as the suffix itself
includes a dot or dash.
Differential revision: https://reviews.llvm.org/D101655
As a follow up of https://reviews.llvm.org/D99989#inline-953343, I'm now
storing std::string instead of char *. I know it might never break as char *,
but if it does, chasing that bug might be dauting.
Besides, I'm also checking of the strings gotten through the SB API are
null or not.
Introduce three new stop reasons for fork, vfork and vforkdone events.
This includes server support for serializing fork/vfork events into
gdb-remote protocol. The stop infos for the two base events take a pair
of PID and TID for the newly forked process.
Differential Revision: https://reviews.llvm.org/D100196
Some linters get rather upset upon seeing
`std::unordered_map<const char*`, because it looks like a map of
strings but isn't. lldb uses interned strings so this is not a problem.
DenseMap is a better data structure for this anyways, so use that
instead.
VSCode doesn't render multiple variables with the same name in the variables view. It only renders one of them. This is a situation that happens often when there are shadowed variables.
The nodejs debugger solves this by adding a number suffix to the variable, e.g. "x", "x2", "x3" are the different x variables in nested blocks.
In this patch I'm doing something similar, but the suffix is " @ <file_name:line>), e.g. "x @ main.cpp:17", "x @ main.cpp:21". The fallback would be an address if the source and line information is not present, which should be rare.
This fix is only needed for globals and locals. Children of variables don't suffer of this problem.
When there are shadowed variables
{F16182150}
Without shadowed variables
{F16182152}
Modifying these variables through the UI works
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D99989
In certain occasions times, like when LLDB is initializing and
evaluating the .lldbinit files, it tries to print to stderr and stdout
directly. This confuses the IDE with malformed data, as it talks to
lldb-vscode using stdin and stdout following the JSON RPC protocol. This
ends up terminating the debug session with the user unaware of what's
going on. There might be other situations in which this can happen, and
they will be harder to debug than the .lldbinit case.
After several discussions with @clayborg, @yinghuitan and @aadsm, we
realized that the best course of action is to simply redirect stdout and
stderr to the console, without modifying LLDB itself. This will prove to
be resilient to future bugs or features.
I made the simplest possible redirection logic I could come up with. It
only works for POSIX, and to make it work with Windows should be merely
changing pipe and dup2 for the windows equivalents like _pipe and _dup2.
Sadly I don't have a Windows machine, so I'll do it later once my office
reopens, or maybe someone else can do it.
I'm intentionally not adding a stop-redirecting logic, as I don't see it
useful for the lldb-vscode case (why would we want to do that, really?).
I added a test.
Note: this is a simpler version of D80659. I first tried to implement a
RIIA version of it, but it was problematic to manage the state of the
thread and reverting the redirection came with some non trivial
complexities, like what to do with unflushed data after the debug
session has finished on the IDE's side.
This diff ass postRunCommands, which are the counterpart of the preRunCommands. TThey will be executed right after the target is launched or attached correctly, which means that the targets can assume that the target is running.
Differential Revision: https://reviews.llvm.org/D100340
Use a variable of static storage duration to reference an intentionally
leaked variable. A static data area is in the GC-set of various leak
checkers.
This fixes 3 `check-lldb-shell` tests in a `-DLLVM_USE_SANITIZER={Leaks,Address}` build,
e.g. `test/Shell/Reproducer/TestHomeDir.test`
Differential Revision: https://reviews.llvm.org/D100806
debugserver's MachTask::DeallocateMemory when removing an
allocate entry from our map (in resposne to an '_m' packet),
copy the size from the entry before removing it from the
map and then using the iterator to fix an ASAN error on
the bots when running TestGdbRemoteMemoryAllocation.py
rdar://76595998
Progress events internally have a completed count and a total count, which can mean that for a job with 20000 total counts, then there will be 20000 events fired. Sending all these events to the IDE can break it. For example, debugging a huge binary resulted in around 50 million messages, which rendered the IDE useless, as it was spending all of its resources simply parsing messages and updating the UI.
A way to fix this is to send unique percentage updates, which are at most 100 per job, which is not much. I was able to debug that big target and confirm that only unique percentage notifications are sent. I can't write a test for this because the current test is flaky. I'll figure out later how to make the test reliable, but fixing this will unblock us from deploy a new version of lldb-vscode.
Differential Revision: https://reviews.llvm.org/D100443
Problem:
On SystemZ we need to open text files in text mode. On Windows, files opened in text mode adds a CRLF '\r\n' which may not be desirable.
Solution:
This patch adds two new flags
- OF_CRLF which indicates that CRLF translation is used.
- OF_TextWithCRLF = OF_Text | OF_CRLF indicates that the file is text and uses CRLF translation.
Developers should now use either the OF_Text or OF_TextWithCRLF for text files and OF_None for binary files. If the developer doesn't want carriage returns on Windows, they should use OF_Text, if they do want carriage returns on Windows, they should use OF_TextWithCRLF.
So this is the behaviour per platform with my patch:
z/OS:
OF_None: open in binary mode
OF_Text : open in text mode
OF_TextWithCRLF: open in text mode
Windows:
OF_None: open file with no carriage return
OF_Text: open file with no carriage return
OF_TextWithCRLF: open file with carriage return
The Major change is in llvm/lib/Support/Windows/Path.inc to only set text mode if the OF_CRLF is set.
```
if (Flags & OF_CRLF)
CrtOpenFlags |= _O_TEXT;
```
These following files are the ones that still use OF_Text which I left unchanged. I modified all these except raw_ostream.cpp in recent patches so I know these were previously in Binary mode on Windows.
./llvm/lib/Support/raw_ostream.cpp
./llvm/lib/TableGen/Main.cpp
./llvm/tools/dsymutil/DwarfLinkerForBinary.cpp
./llvm/unittests/Support/Path.cpp
./clang/lib/StaticAnalyzer/Core/HTMLDiagnostics.cpp
./clang/lib/Frontend/CompilerInstance.cpp
./clang/lib/Driver/Driver.cpp
./clang/lib/Driver/ToolChains/Clang.cpp
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99426
Consistently use return with EXIT_SUCCESS or EXIT_FAILURE instead of
mix-and-matching return, exit 0, 1 etc.
Differential revision: https://reviews.llvm.org/D99701
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
Print LLVM's pretty stack trace when lldb-vscode crashes. Also removes
the unnecessary call to PrintStackTraceOnErrorSignal in lldb-server as
it's already part of InitLLVM.
Differential revision: https://reviews.llvm.org/D99535
LLDB can often appear deadlocked to users that use IDEs when it is indexing DWARF, or parsing symbol tables. These long running operations can make a debug session appear to be doing nothing even though a lot of work is going on inside LLDB. This patch adds a public API to allow clients to listen to debugger events that report progress and will allow UI to create an activity window or display that can show users what is going on and keep them informed of expensive operations that are going on inside LLDB.
Differential Revision: https://reviews.llvm.org/D97739
Call `os_log_fault` when an lldb assert fails. We piggyback off
`LLVM_SUPPORT_XCODE_SIGNPOSTS`, which also depends on `os_log`, to avoid
having to introduce another CMake check and corresponding define.
This patch also adds a small test using lldb-test that verifies we abort
with a "regular" assertion when asserts are enabled.
Differential revision: https://reviews.llvm.org/D98987
Summary:
The request "evaluate" supports a "context" attribute, which is sent by VSCode. The attribute is defined here https://microsoft.github.io/debug-adapter-protocol/specification#Requests_Evaluate
The "clipboard" context is not yet supported by lldb-vscode, so we can forget about it for now. The 'repl' (i.e. Debug Console) and 'watch' (i.e. Watch Expression) contexts must use the expression parser in case the frame's variable path is not enough, as the user expects these expressions to never fail. On the other hand, the 'hover' expression is invoked whenever the user hovers on any keyword on the UI and the user is fine with the expression not being fully resolved, as they know that the 'repl' case is the fallback they can rely on.
Given that the 'hover' expression is invoked many many times without the user noticing it due to it being triggered by the mouse, I'm making it use only the frame's variable path functionality and not the expression parser. This should speed up tremendously the responsiveness of a debug session when the user only sets source breakpoints and inspect local variables, as the entire debug info is not needed to be parsed.
Regarding tests, I've tried to be as comprehensive as possible considering a multi-file project. Fortunately, the results from the "hover" case are enough most of the times.
Differential Revision: https://reviews.llvm.org/D98656
This fixes the following two warnings in code that's only compiled on
arm64:
- warning: cast from 'const void *' to 'unsigned char *' drops const
qualifier [-Wcast-qual]
- warning: embedding a directive within macro arguments has undefined
behavior [-Wembedded-directive]
Fix the logic to find the app bundle in a path by correctly accounting
for paths containing multiple occurrences of `.app`. The new logic will
correctly extract `com.app.Foo.app` from `com.app.Foo.app/com.app.Foo`.
rdar://74666208
Differential revision: https://reviews.llvm.org/D97441
VSCode was not being informed whenever a location had been resolved (after being initated as non-resolved), so even though it was actually resolved, the IDE would show a hollow dot (instead of a red dot) because it didn't know about the change.
Differential Revision: https://reviews.llvm.org/D96680
Our code for locating the shared library directory works via dladdr (or
the windows equivalent) to locate the path of an address known to reside
in liblldb. This works great for C++ programs, but there's a catch.
When (lib)lldb is used from python (like in our test suite), this dladdr
call will return a path to the _lldb.so (or such) file in the python
directory. To compensate for this, we have code which attempts to
resolve this symlink, to ensure we get the canonical location. However,
here's the second catch.
On windows, this file is not a symlink (but a copy), so this logic
fails. Since most of our other paths are derived from the liblldb
location, all of these paths will be wrong, when running the test suite.
One effect of this was the failure to find lldb-server in D96202.
To fix this issue, I add some windows-specific code to locate the
liblldb directory. Since it cannot rely on symlinks, it works by
manually walking the directory tree -- essentially doing the opposite of
what we do when computing the python directory.
To avoid python leaking back into the host code, I implement this with
the help of a callback which can be passed to HostInfo::Initialize in
order to assist with the directory location. The callback lives inside
the python plugin.
I also strenghten the existing path test to ensure the returned path is
the right one.
Differential Revision: https://reviews.llvm.org/D96779
The new FreeBSDRemote plugin has reached feature parity with the legacy
plugin, so we can finally remove the latter. The new plugin will
be renamed to FreeBSD in a separate commit to avoid confusion.
Differential Revision: https://reviews.llvm.org/D96555
@mstorsjo found a mistake that I made when trying to fix some Windows
compilation errors encountered by @stella.stamenova.
I was incorrectly using the LLVM_ON_UNIX macro. In any case, proper use
of
#if defined(_WIN32)
should be the actual fix.
Differential Revision: https://reviews.llvm.org/D96060
@stella.stamenova found out that lldb-vscode's Win32 macros were failing
when building on windows targetings POSIX platforms.
I'm changing these macros for LLVM_ON_UNIX, which should be more
accurate.
stella.stemenova mentioned in https://reviews.llvm.org/D93951 failures on Windows for this test.
I'm fixing the macro definitions and disabling the tests for python
versions lower than 3.7. I'll figure out that actual issue with
python3.6 after the buildbots are fine again.
Depends on D93874.
runInTerminal was using --wait-for, but it was some problems because it uses process polling looking for a single instance of the debuggee:
- it gets to know of the target late, which renders breakpoints in the main function almost impossible
- polling might fail if there are already other processes with the same name
- polling might also fail on some linux machine, as it's implemented with the ps command, and the ps command's args and output are not standard everywhere
As a better way to implement this so that it works well on Darwin and Linux, I'm using now the following process:
- lldb-vscode notices the runInTerminal, so it spawns lldb-vscode with a special flag --launch-target <target>. This flags tells lldb-vscode to wait to be attached and then it execs the target program. I'm using lldb-vscode itself to do this, because it makes finding the launcher program easier. Also no CMAKE INSTALL scripts are needed.
- Besides this, the debugger creates a temporary FIFO file where the launcher program will write its pid to. That way the debugger will be sure of which program to attach.
- Once attach happend, the debugger creates a second temporary file to notify the launcher program that it has been attached, so that it can then exec. I'm using this instead of using a signal or a similar mechanism because I don't want the launcher program to wait indefinitely to be attached in case the debugger crashed. That would pollute the process list with a lot of hanging processes. Instead, I'm setting a 20 seconds timeout (that's an overkill) and the launcher program seeks in intervals the second tepmorary file.
Some notes:
- I preferred not to use sockets because it requires a lot of code and I only need a pid. It would also require a lot of code when windows support is implemented.
- I didn't add Windows support, as I don't have a windows machine, but adding support for it should be easy, as the FIFO file can be implemented with a named pipe, which is standard on Windows and works pretty much the same way.
The existing test which didn't pass on Linux, now passes.
Differential Revision: https://reviews.llvm.org/D93951
Having this 4MB buffer with a compile-time initialized string forced it
into the DATA section and it took up 4MB of space in the binary, which
accounts for like 80% of debugserver's footprint on disk. Change it to
BSS and strcpy in the initial value at runtime instead.
<rdar://problem/73503892>
lldb-vsdode was communicating the list of modules to the IDE with events, which in practice ended up having some drawbacks
- when debugging large targets, the number of these events were easily 10k, which polluted the messages being transmitted, which caused the following: a harder time debugging the messages, a lag after terminated the process because of these messages being processes (this could easily take several seconds). The latter was specially bad, as users were complaining about it even when they didn't check the modules view.
- these events were rarely used, as users only check the modules view when something is wrong and they try to debug things.
After getting some feedback from users, we realized that it's better to not used events but make this simply a request and is triggered by users whenever they needed.
This diff achieves that and does some small clean up in the existing code.
Differential Revision: https://reviews.llvm.org/D94033
Debugging app launch/attach failures can be difficult because of
all of the messages logged to the console on a darwin system;
emitting specific messages around critical API calls can make it
easier to narrow the search for the console messages related to
the failure.
<rdar://problem/67220442>
Differential revision: https://reviews.llvm.org/D94357
- Remove unused plists that were referenced (but unused) by Xcode.
- Move all debugserver plists unders tools/debugserver/resources.
- Add the ability to distinguish between com.apple.security.cs.debugger
and com.apple.private.cs.debugger.
rdar://66082043
Differential revision: https://reviews.llvm.org/D94320
Add stN aliases for the FPU (stmmN) registers on MacOSX. This should
improve compatibility between MacOSX and other platforms, and partially
fix x86*-fp-write tests without having to duplicate them. Note that
the tests are currently still broken due to ftag incompatibility.
Differential Revision: https://reviews.llvm.org/D91847
This patch introduces a LLDB_SCOPED_TIMER macro to hide the needlessly
repetitive creation of scoped timers in LLDB. It's similar to the
LLDB_LOG(F) macro.
Differential revision: https://reviews.llvm.org/D93663
Kill (rather than detach) form the inferior if debugserver loses its
connection to lldb to prevent zombie processes.
Differential revision: https://reviews.llvm.org/D92908
Use the newly added spawnattr API, posix_spawnattr_setarchpref_np, to
select a slice preferences per cpu and subcpu types, instead of just cpu
with posix_spawnattr_setarchpref_np.
rdar://16094957
Differential revision: https://reviews.llvm.org/D92712
Previously we used UINT16_MAX to mean no port/no specifc
port. This leads to confusion because 65535 is a valid
port number.
Instead use an optional. If you want a specific port call
LaunchGDBServer as normal, otherwise pass an empty optional
and it will be set to the port that gets chosen.
(or left empty in the case where we fail to find a port)
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D92035
Previously if you did:
$ lldb-server platform --server <...> --min-gdbserver-port 12346
--max-gdbserver-port 12347
(meaning only use port 12346 for gdbservers)
Then tried to launch two gdbservers on the same connection,
the second one would return port 65535. Which is a real port
number but it actually means lldb-server didn't find one it was
allowed to use.
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1919;port:12346;#c0
<...>
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1927;port:65535;#c7
This situation should be an error even if port 65535 does happen
to be available on the current machine.
To fix this make PortMap it's own class within
GDBRemoteCommunicationServerPlatform.
This almost the same as the old typedef but for
GetNextAvailablePort() returning an llvm::Expected.
This means we have to handle not finding a port,
by returning an error packet.
Also add unit tests for this new PortMap class.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91634
Adds a command line option that makes debugserver propagate the SIGSEGV
signal to the target process.
Motivation: I'm one of the maintainers of Delve [1] a debugger for Go.
We use debugserver as our backend on macOS and one of the most often
reported bugs is that, on macOS, we don't propagate SIGSEGV back to the
target process [2]. Sometimes some programs will actually cause a
SIGSEGV, by design, and then handle it. Those programs can not be
debugged at all.
Since catching signals isn't very important for a Go debugger I'd much
rather have a command line option in debugserver that causes it to let
SIGSEGV go directly to the target process.
[1] https://github.com/go-delve/delve/
[2] https://github.com/go-delve/delve/issues/852
Differential revision: https://reviews.llvm.org/D89315
On x86_64, when you hit a __builtin_debugtrap instruction, you
can continue past this in the debugger. This patch has debugserver
recognize the specific instruction used for __builtin_debugtrap
and advance the pc past it, so that the user can continue execution
once they've hit one of these.
In the patch discussion, we were in agreement that it would be better
to have this knowledge up in lldb instead of depending on each
stub rewriting the pc behind the debugger's back, but that's a
larger scale change for another day.
<rdar://problem/65521634>
Differential revision: https://reviews.llvm.org/D91238
This fixes a reproducer test failure that was caused by the undefined
order in which global destructors run. More concretely, the static
instance of the RealFileSystem had been destroyed before we finalized
the reproducer, which uses it to copy files into the reproducer. By
exiting normally, we call SBDebugger::Terminate and finalize the
reproducer before any static dtors are run.
For performance reasons the reproducers don't copy the files captured by
the file collector eagerly, but wait until the reproducer needs to be
generated.
This is a problematic when LLDB crashes and we have to do all this
signal-unsafe work in the signal handler. This patch uses a similar
trick to clang, which has the driver invoke a new cc1 instance to do all
this work out-of-process.
This patch moves the writing of the mapping file as well as copying over
the reproducers into a separate process spawned when lldb crashes.
Differential revision: https://reviews.llvm.org/D89600
The existing help text was very terse and was missing several important
options. In the new version, I add a short description of each option
and a slightly longer description of the tool as a whole.
The new option list does not include undocumented no-op options:
--debug and --verbose. It also does not include undocumented short
aliases for long options, with two exceptions: -h, because it's
well-known; and -S (--setsid), as it's used in one test. Using these
options will now produce an error. I believe that is acceptable as users
aren't generally invoking lldb-server directly, and the only way to
learn about the short aliases was by looking at the source.
Differential Revision: https://reviews.llvm.org/D89477
the xcode project file for debugserver exists only to make my
life easier when I'm working only on debugserver and don't need
to build the rest of llvm/lldb. It had many build configurations
to reflect our old lldb xcode project file, which is long gone.
Removing them to simplify the configurations.
Specifically dropping CustomSwift-Debug, DebugClang, DebugPresubmission,
CustomSwift-Release, BuildAndIntegration. Keeping Debug & Release.
Link against CarouselServices on watchos, recognize the
WatchComplicationLaunch launch flag option when that framework
is available.
<rdar://problem/62473967>, <rdar://problem/61230088>
Add a new FreeBSD Process plugin using client/server model. This plugin
is based on the one used by NetBSD. It currently supports a subset
of functionality for amd64. It is automatically used when spawning
lldb-server. It can also be used by lldb client by setting
FREEBSD_REMOTE_PLUGIN environment variable (to any value).
The code is capable of debugging simple single-threaded programs. It
supports general purpose, debug and FPU registers (up to XMM) of amd64,
basic signalling, software breakpoints.
Adding the support for the plugin involves removing some dead code
from FreeBSDPlatform plugin (that was not ever used because
CanDebugProcess() returned false), and replacing it with appropriate
code from NetBSD platform support.
Differential Revision: https://reviews.llvm.org/D88796
Per the DAP spec for SetBreakpoints [1], the way to clear breakpoints is: `To clear all breakpoint for a source, specify an empty array.`
However, leaving the breakpoints field unset is also a well formed request (note the `breakpoints?:` in the `SetBreakpointsArguments` definition). If it's unset, we have a couple choices:
1. Crash (current behavior)
2. Clear breakpoints
3. Return an error response that the breakpoints field is missing.
I propose we do (2) instead of (1), and treat an unset breakpoints field the same as an empty breakpoints field.
[1] https://microsoft.github.io/debug-adapter-protocol/specification#Requests_SetBreakpoints
Reviewed By: wallace, labath
Differential Revision: https://reviews.llvm.org/D88513
When running in an ipv6-only environment where `AF_INET` sockets are not available, many lldb tests (mostly gdb remote tests) fail because things like `127.0.0.1` don't work there.
Use `localhost` instead of `127.0.0.1` whenever possible, or include a fallback of creating `AF_INET6` sockets when `AF_INET` fails.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87333
Extract a function for turning `eLaunchFlavorDefault` into a concreate `eLaunchFlavor` value.
This new function encapsulates the few compile time variables involved, and also prevents clang unused code diagnostics.
Differential Revision: https://reviews.llvm.org/D87327
If our process terminates due to an unhandled signal, we are supposed to get the
signal code via WTERMSIG. However, we instead try to get the exit status via
WEXITSTATUS which just ends up always calculating signal code 0 (at least on the
macOS implementation where it just shifts the signal code bits away and we're
left with only 0 bits).
The exit status calculation on the LLDB side also seems a bit off as it claims
an exit status that is just the signal code (instead of for example 128 + signal
code), but that will be another patch.
Reviewed By: jasonmolenda
Differential Revision: https://reviews.llvm.org/D86336
Add a reproducer verifier that catches:
- Missing or invalid home directory
- Missing or invalid working directory
- Missing or invalid module/symbol paths
- Missing files from the VFS
The verifier is enabled by default during replay, but can be skipped by
passing --reproducer-no-verify.
Differential revision: https://reviews.llvm.org/D86497
The Symbol Status in modules view is simplified so that only when the module has debug info and its size is non-zero, will the status message be displayed. The symbol status message is renamed to debug info size and flag message like "Symbols not found" and "Symbols loaded" is deleted.
Differential Revision: https://reviews.llvm.org/D86662
This patch changes the command interpreter sourcing logic for the REPL
init file. Instead of looking for a arbitrary file name, it standardizes
the REPL init file name to match to following scheme:
`.lldbinit-<language>-repl`
This will make the naming more homogenous and the sourcing logic future-proof.
rdar://65836048
Differential Revision: https://reviews.llvm.org/D86987
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Add a reproducer verifier that catches:
- Missing or invalid home directory
- Missing or invalid working directory
- Missing or invalid module/symbol paths
- Missing files from the VFS
The verifier is enabled by default during replay, but can be skipped by
passing --reproducer-no-verify.
Differential revision: https://reviews.llvm.org/D86497
This patch removes the rather confusing LLDB_LIB_DIR and LLDB_IMPLIB_DIR
environment variables. They are confusing because LLDB_LIB_DIR would
point to the bin subdirectory in the build root while LLDB_IMPLIB_DIR
would point to the lib subdirectory. The reason far this was
LLDB.framework, which gets build under bin.
This patch replaces their uses with configuration.lldb_framework_path
and configuration.lldb_libs_dir respectively.
Differential revision: https://reviews.llvm.org/D86817
Always make lldb-argdumper a dependency of liblldb. Currently it is only
a dependency of the python swig target because of the relative symlink
in the python resource directory. That means that the dependency won't
be there when LLDB_ENABLE_PYTHON is disabled.
Differential revision: https://reviews.llvm.org/D86722
This patch adds the infrastructure to have language specific REPL init
files. It's the foundation work to a following patch that will introduce
Swift REPL init file.
When lldb is launched with the `--repl` option, it will look for a REPL
init file in the home directory and source it. This overrides the
default `~/.lldbinit`, which content might make the REPL behave
unexpectedly. If the REPL init file doesn't exists, lldb will fall back
to the default init file.
rdar://65836048
Differential Revision: https://reviews.llvm.org/D86242
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Only link against Python3_LIBRARY when LLDB_ENABLE_PYTHON is true. We
have to be more strict now becuase Python3_LIBRARY might be set to
NOTFOUND instead of being not set at all.
This patch is a big sed to rename the following variables:
s/PYTHON_LIBRARIES/Python3_LIBRARIES/g
s/PYTHON_INCLUDE_DIRS/Python3_INCLUDE_DIRS/g
s/PYTHON_EXECUTABLE/Python3_EXECUTABLE/g
s/PYTHON_RPATH/Python3_RPATH/g
I've also renamed the CMake module to better express its purpose and for
consistency with FindLuaAndSwig.
Differential revision: https://reviews.llvm.org/D85976
`lldb-server platform --socket-file /any/path` currently always fails to create
the socket file. This stopped working after D67424 which changed the
input variables of `writeFileAtomically` slightly. We're expected to
pass in a temporary path template (`/tmp/foo-%%%%%`) and the final
path we want to write. Instead we currently pass in the never set
`temp_file_path` as the temporary path (which will make this function always
fail) and pass in the temp_file_spec's path as the final path (which is actually
the template path such as `/tmp/foo-%%%%%`) instead of the actual path
we want to write (e.g. `/tmp/foo`).
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85890
This patch configures LLDB.framework to build as a flat unversioned
framework on non-macOS Darwin targets, which have never supported the
macOS framework layout.
This patch also renames the 'IOS' cmake variable to 'APPLE_EMBEDDED' to
reflect the fact that lldb is built for several different kinds of embedded
Darwin targets, not just iOS.
Differential Revision: https://reviews.llvm.org/D85770
This patch is similar in spirit to https://reviews.llvm.org/D84480,
but does the maccatalyst/macosx disambiguation. I also took the
opportunity to factor out the gdb-remote packet log scanning used by
several testcases into lldbutil functions.
rdar://problem/66059257
Differential Revision: https://reviews.llvm.org/D84576
When lldb cannot find source file thus IDE renders a disassembly view, add syntax highlighting for constants, registers and final line comments for better debugging experience.
The original plain disassembly view looks like:
{F12401687}
An ideal view is like the screenshot attached.
{F12401515}
In this diff, the mimeType is a kind of media type for formatting the content in the response to a source request. Elements in the disassembly view, like constants, registers and final line comments are colored for highlighting.
A built-in support in the VSCode IDE for syntax highlighting will identify the which mimeType to apply and render the disassembly view as expected.
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D84555
On an iOS device, if debugserver is left to figure out how to launch
the binary provided, it looks at the filename to see if it contains
".app" and asks FrontBoard to launch it. However, if this is actually
a command line app with the characters ".app" in the name, it would
end up trying to launch that via the FrontBoard calls even though it
needed to be launched via posix_spawn. For instance, a command line
program called com.application.tester.
Jim suggested this patch where we only send binaries that end in ".app"
to FrontBoard.
Often debugsever is invoked with a --launch command line argument to
specify the launch method, and none of this code is hit in that
instance.
<rdar://problem/65297100>
If a module has debug info, the size of debug symbol will be displayed after the Symbols Loaded Message for each module in the VScode modules view.{F12335461}
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D83731
Summary: If a module has debug info, the size of debug symbol will be displayed after the Symbols Loaded Message for each module in the VScode modules view.{F12335461}
Reviewers: wallace, clayborg
Reviewed By: wallace, clayborg
Subscribers: cfe-commits, aprantl, lldb-commits
Tags: #lldb, #clang
Differential Revision: https://reviews.llvm.org/D83731
This patch basically moves the disambiguation code from a place where
it was complicated to implement straight to where the load command is
parsed, which has the neat side affect of actually supporting all call
sites!
rdar://problem/66011909
Differential Revision: https://reviews.llvm.org/D84480
These were found by Clang's new -Wsuggest-override.
This patch doesn't touch any code in unittests/, since much of it intentionally doesn't use override to avoid massive warning spam from -Winconsistent-missing-override due to the use of MOCK_*** macros.
Differential Revision: https://reviews.llvm.org/D83847
It was failing because some module events had empty UUID, and that was not handled correctly.
The diff that added that logic is https://reviews.llvm.org/D82477
Original commit c60216db15.
The test can only run on Darwin because of how it was setup, so I'm
enforcing that.
Summary:
Test Plan:
Reviewers:
Subscribers:
Tasks:
Tags:
Summary: User can expand and check compile unit list for the modules that have debug info.
Reviewers: wallace, clayborg
Reviewed By: clayborg
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83072
Summary:
Whenever a module is created, removed or changed, lldb-vscode is now sending an event that can be interpreted by the IDE so that modules can be rendered in the IDE, like the tree view in this screenshot
{F12229758}
Reviewers: wallace, clayborg, kusmour, aadsm
Reviewed By: clayborg
Subscribers: cfe-commits, labath, lldb-commits
Tags: #lldb, #clang
Differential Revision: https://reviews.llvm.org/D82477
There are bugs where you don't want the signal handler to trigger, most
notably when that will cause another crash. Examples of this are lldb
running out of memory or a bug in the reproducer generation code. This
adds an escape hatch trough a (developer oriented) flag to not install
the signal handler.
rdar://problem/65149595
Differential revision: https://reviews.llvm.org/D83496
This is a preparatory rename of the developer facing reproducer flags.
reproducer-skip-version-check -> reproducer-no-version-check
reproducer-auto-generate -> reproducer-generate-on-quit
This patch fixes debugserver incorrectly returning the SDK version
instead of the minimum deployment target version.
rdar://problem/65001691
Differential Revision: https://reviews.llvm.org/D83443
This reverts commit 0da0437b2a to unbreak
the following tests:
lldb-api.tools/lldb-server.TestAppleSimulatorOSType.py
lldb-api.tools/lldb-server.TestGdbRemoteAttach.py
lldb-api.tools/lldb-server.TestGdbRemoteProcessInfo.py
lldb-api.tools/lldb-server.TestGdbRemoteRegisterState.py
lldb-api.tools/lldb-server.TestGdbRemoteThreadsInStopReply.py
lldb-api.tools/lldb-server.TestLldbGdbServer.py
debugserver and lldb
This patch improves the heuristics for correctly identifying simulator binaries on Darwin and adds support for simulators running on Apple Silicon.
rdar://problem/64046344
Differential Revision: https://reviews.llvm.org/D82616
Walter Erquinigo