Enable reporting fork/vfork events to the server when supported.
At this moment, this is used only to test the server code, as real
client does not report fork-events and vfork-events as supported.
Differential Revision: https://reviews.llvm.org/D100208
Introduce three new stop reasons for fork, vfork and vforkdone events.
This includes server support for serializing fork/vfork events into
gdb-remote protocol. The stop infos for the two base events take a pair
of PID and TID for the newly forked process.
Differential Revision: https://reviews.llvm.org/D100196
Introduce a NativeProcessProtocol API for indicating support for
protocol extensions and enabling them. LLGS calls
GetSupportedExtensions() method on the process factory to determine
which extensions are supported by the plugin. If the future is both
supported by the plugin and reported as supported by the client, LLGS
enables it and reports to the client as supported by the server.
The extension is enabled on the process instance by calling
SetEnabledExtensions() method. This is done after qSupported exchange
(if the debugger is attached to any process), as well as after launching
or attaching to a new inferior.
The patch adds 'fork' extension corresponding to 'fork-events+'
qSupported feature and 'vfork' extension for 'vfork-events+'. Both
features rely on 'multiprocess+' being supported as well.
Differential Revision: https://reviews.llvm.org/D100153
VSCode doesn't render multiple variables with the same name in the variables view. It only renders one of them. This is a situation that happens often when there are shadowed variables.
The nodejs debugger solves this by adding a number suffix to the variable, e.g. "x", "x2", "x3" are the different x variables in nested blocks.
In this patch I'm doing something similar, but the suffix is " @ <file_name:line>), e.g. "x @ main.cpp:17", "x @ main.cpp:21". The fallback would be an address if the source and line information is not present, which should be rare.
This fix is only needed for globals and locals. Children of variables don't suffer of this problem.
When there are shadowed variables
{F16182150}
Without shadowed variables
{F16182152}
Modifying these variables through the UI works
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D99989
In certain occasions times, like when LLDB is initializing and
evaluating the .lldbinit files, it tries to print to stderr and stdout
directly. This confuses the IDE with malformed data, as it talks to
lldb-vscode using stdin and stdout following the JSON RPC protocol. This
ends up terminating the debug session with the user unaware of what's
going on. There might be other situations in which this can happen, and
they will be harder to debug than the .lldbinit case.
After several discussions with @clayborg, @yinghuitan and @aadsm, we
realized that the best course of action is to simply redirect stdout and
stderr to the console, without modifying LLDB itself. This will prove to
be resilient to future bugs or features.
I made the simplest possible redirection logic I could come up with. It
only works for POSIX, and to make it work with Windows should be merely
changing pipe and dup2 for the windows equivalents like _pipe and _dup2.
Sadly I don't have a Windows machine, so I'll do it later once my office
reopens, or maybe someone else can do it.
I'm intentionally not adding a stop-redirecting logic, as I don't see it
useful for the lldb-vscode case (why would we want to do that, really?).
I added a test.
Note: this is a simpler version of D80659. I first tried to implement a
RIIA version of it, but it was problematic to manage the state of the
thread and reverting the redirection came with some non trivial
complexities, like what to do with unflushed data after the debug
session has finished on the IDE's side.
This diff ass postRunCommands, which are the counterpart of the preRunCommands. TThey will be executed right after the target is launched or attached correctly, which means that the targets can assume that the target is running.
Differential Revision: https://reviews.llvm.org/D100340
Print a single line listing all the categories that are being skipped,
rather than relying on the check.*Support() functions specifying why a
particular category will be skipped. If we know why a category got
skipped, still print that in verbose mode.
The motivation for this change is that sometimes engineers misidentify
the output of these messages as the cause for a test failure (e.g. not
being able to build libc++ or libstdc++).
Differential revision: https://reviews.llvm.org/D100508
This functionality is used exactly once, and it is trivial to implement
it differently (capture into two distinct variables, and compare for
equality afterwards).
By checking for cpu and toolchain features ahead
of time we don't need the custom return codes.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97684
These two functions are doing the same thing, only one of them is
sending the packets immediately and the other "queues" them to be sent
later. The first one is better as in case of errors, the backtrace will
point straight to the place that caused them.
Modify the first method to avoid duplication, and ten standardize on it.
Use a with block for reading the cpuinfo file.
When loading the file fails (or we're not on Linux)
return an empty string. Since all the callers are
going to do "x in self.getCPUInfo()".
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D99729
Respect --apple-sdk <path> if it's specified. If the SDK is simply
mounted from some disk image, and not actually installed, this is the
only way to use it.
Differential Revision: https://reviews.llvm.org/D99746
This patch adds a test case to test AArch64 dynamic register sets.
This tests for the availability of certain register sets and query
their registers accordingly.
Reviewed By: labath, DavidSpickett
Differential Revision: https://reviews.llvm.org/D96463
This patch fixes an issue, where if the thread has a signal blocked when
we try to inject it into the process (via vCont), then instead of
executing straight away, the injected signal will trigger another stop
when the thread unblocks the signal.
As (linux) threads start their life with SIGUSR1 (among others)
disabled, and only enable it during initialization, injecting the signal
during this window did not behave as expected. The fix is to change the
test to ensure the signal gets injected with the signal unblocked.
The simplest way to do this was to write a dedicated inferior for this
test. I also created a new header to factor out the function retrieving
the (os-specific) thread id.
Add a minimal support for the multiprocess extension in lldb-server.
The server indicates support for it via qSupported, and accepts
thread-ids containing a PID. However, it still does not support
debugging more than one inferior, so any other PID value results
in an error.
Differential Revision: https://reviews.llvm.org/D98482
TestVSCode_disconnect.test_launch fails with clean up error because
disconnect gets called twice once from the test case and once from
the tear down hook.
This patch disables disconnect after its been called from test_launch
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D99491
LLDB can often appear deadlocked to users that use IDEs when it is indexing DWARF, or parsing symbol tables. These long running operations can make a debug session appear to be doing nothing even though a lot of work is going on inside LLDB. This patch adds a public API to allow clients to listen to debugger events that report progress and will allow UI to create an activity window or display that can show users what is going on and keep them informed of expensive operations that are going on inside LLDB.
Differential Revision: https://reviews.llvm.org/D97739
Summary:
The request "evaluate" supports a "context" attribute, which is sent by VSCode. The attribute is defined here https://microsoft.github.io/debug-adapter-protocol/specification#Requests_Evaluate
The "clipboard" context is not yet supported by lldb-vscode, so we can forget about it for now. The 'repl' (i.e. Debug Console) and 'watch' (i.e. Watch Expression) contexts must use the expression parser in case the frame's variable path is not enough, as the user expects these expressions to never fail. On the other hand, the 'hover' expression is invoked whenever the user hovers on any keyword on the UI and the user is fine with the expression not being fully resolved, as they know that the 'repl' case is the fallback they can rely on.
Given that the 'hover' expression is invoked many many times without the user noticing it due to it being triggered by the mouse, I'm making it use only the frame's variable path functionality and not the expression parser. This should speed up tremendously the responsiveness of a debug session when the user only sets source breakpoints and inspect local variables, as the entire debug info is not needed to be parsed.
Regarding tests, I've tried to be as comprehensive as possible considering a multi-file project. Fortunately, the results from the "hover" case are enough most of the times.
Differential Revision: https://reviews.llvm.org/D98656
Split out the common base of Linux hardware breakpoint/watchpoint
support for AArch64 into a Utility class, and use it to implement
the matching support on FreeBSD.
Differential Revision: https://reviews.llvm.org/D96548
This reapplies 7df4eaaa93/D96202, which was reverted due to issues on
windows. These were caused by problems in the computation of the liblldb
directory, which was fixed by D96779.
The original commit message was:
Our test configuration logic assumes that the tests can be run either
with debugserver or with lldb-server. This is not entirely correct,
since lldb server has two "personalities" (platform server and debug
server) and debugserver is only a replacement for the latter.
A consequence of this is that it's not possible to test the platform
behavior of lldb-server on macos, as it is not possible to get a hold of
the lldb-server binary.
One solution to that would be to duplicate the server configuration
logic to be able to specify both executables. However, that seems
excessively redundant.
A well-behaved lldb should be able to find the debug server on its own,
and testing lldb with a different (lldb-|debug)server does not seem very
useful (even in the out-of-tree debugserver setup, we copy the server
into the build tree to make it appear "real").
Therefore, this patch deletes the configuration altogether and changes
the low-level server retrieval functions to be able to both lldb-server
and debugserver paths. They do this by consulting the "support
executable" directory of the lldb under test.
Differential Revision: https://reviews.llvm.org/D96202
This issue was introduced in https://reviews.llvm.org/D92187.
The guard I'm changing were is supposed to act when linux is loading the linker for the second time (due to differences in paths like symlinks).
This is done by checking `module_sp != m_interpreter_module.lock()` however this will be true when `m_interpreter_module` wasn't initialized, making linux unload the linker module (the most visible result here is that lldb will stop getting notified about new modules loaded by the process, because it can't set the rendezvous breakpoint again after the stepping over it once).
The `m_interpreter_module` is not getting initialize when it goes through this path: dbfdb139f7/lldb/source/Plugins/DynamicLoader/POSIX-DYLD/DynamicLoaderPOSIXDYLD.cpp (L332), which happens when lldb was able to read the address from the dynamic section of the executable.
What I'm not sure about though, is if when we go through this path if we still load the linker twice on linux. If that's the case then it means we need to somehow set the m_interpreter_module instead of the fix I provide here. I've only tested this on Android.
Differential Revision: https://reviews.llvm.org/D96637
This test supposed to check the test base we are using for pexpect tests, but instead it used the normal TestBase
class we use for all other tests. TestBase already had the substrs type check since D88792 so this
test was passing because of that.
This just changes the test base of the test to the pexpect one so that the `expect` calls find their intended
target function. Also moves the check to the very start so that we can check the argument without
actually having to start a terminal and all that jazz.
(I found this by accident as D88792 got somehow reverted in a downstream branch so this test started
failing).
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D96556
Our test configuration logic assumes that the tests can be run either
with debugserver or with lldb-server. This is not entirely correct,
since lldb server has two "personalities" (platform server and debug
server) and debugserver is only a replacement for the latter.
A consequence of this is that it's not possible to test the platform
behavior of lldb-server on macos, as it is not possible to get a hold of
the lldb-server binary.
One solution to that would be to duplicate the server configuration
logic to be able to specify both executables. However, that seems
excessively redundant.
A well-behaved lldb should be able to find the debug server on its own,
and testing lldb with a different (lldb-|debug)server does not seem very
useful (even in the out-of-tree debugserver setup, we copy the server
into the build tree to make it appear "real").
Therefore, this patch deletes the configuration altogether and changes
the low-level server retrieval functions to be able to both lldb-server
and debugserver paths. They do this by consulting the "support
executable" directory of the lldb under test.
Differential Revision: https://reviews.llvm.org/D96202
Replace the dotest command line options and various cmake variables,
which are used for passing the locations of llvm tools to the API tests
with a single variable, which points to the directory these tools are
placed in. Besides reducing repetition, this also makes things more
similar to how "normal" llvm tests are configured.
Differential Revision: https://reviews.llvm.org/D95261
This patch effectively does the following 3 things:
- Centralize the logic to figure out if a compiler flag is supported.
- Stop sanity checking whether the compiler works at all. While useful,
that's not the decorator's responsibility.
- Invoke the compiler with xcrun on Darwin so we know where to find the
sysroot.
On my macOS Big Sur system, the clang invocation couldn't find libSystem
and would fail the sanity check in the decorator. This meant that the
test suite would always try to run the ASan/UBSan/TSan tests, regardless
of whether compiler-rt was built.
Differential revision: https://reviews.llvm.org/D95995
Depends on D93874.
runInTerminal was using --wait-for, but it was some problems because it uses process polling looking for a single instance of the debuggee:
- it gets to know of the target late, which renders breakpoints in the main function almost impossible
- polling might fail if there are already other processes with the same name
- polling might also fail on some linux machine, as it's implemented with the ps command, and the ps command's args and output are not standard everywhere
As a better way to implement this so that it works well on Darwin and Linux, I'm using now the following process:
- lldb-vscode notices the runInTerminal, so it spawns lldb-vscode with a special flag --launch-target <target>. This flags tells lldb-vscode to wait to be attached and then it execs the target program. I'm using lldb-vscode itself to do this, because it makes finding the launcher program easier. Also no CMAKE INSTALL scripts are needed.
- Besides this, the debugger creates a temporary FIFO file where the launcher program will write its pid to. That way the debugger will be sure of which program to attach.
- Once attach happend, the debugger creates a second temporary file to notify the launcher program that it has been attached, so that it can then exec. I'm using this instead of using a signal or a similar mechanism because I don't want the launcher program to wait indefinitely to be attached in case the debugger crashed. That would pollute the process list with a lot of hanging processes. Instead, I'm setting a 20 seconds timeout (that's an overkill) and the launcher program seeks in intervals the second tepmorary file.
Some notes:
- I preferred not to use sockets because it requires a lot of code and I only need a pid. It would also require a lot of code when windows support is implemented.
- I didn't add Windows support, as I don't have a windows machine, but adding support for it should be easy, as the FIFO file can be implemented with a named pipe, which is standard on Windows and works pretty much the same way.
The existing test which didn't pass on Linux, now passes.
Differential Revision: https://reviews.llvm.org/D93951
On my Debian machine, system libc++/libc++abi is not installed (`libc++1-9 libc++abi-9`),
21 check-lldb-api tests fail because -stdlib=libc++ linked executables cannot
find runtime libc++.so.1 at runtime.
Use the `-Wl,-rpath,$(LLVM_LIBS_DIR)` mechanism in
`packages/Python/lldbsuite/test/make/Makefile.rules` (D58630 for NetBSD) to
allow such tests compile/link with fresh libc++ built beside lldb.
(A system libc++.so.1 is not guaranteed to match fresh libc++ header files.)
Some tweaks to the existing NetBSD rule when generalizing:
* Drop `-L$(LLVM_LIBS_DIR)` since Clang driver adds it correctly.
* Add `-stdlib=libc++` only for `USE_LIBCPP`.
Also, drop `-isystem /usr/include/c++/v1` introduced in D9426. It is not needed
by Clang driver. GCC using libc++ requires more setup.
I don't find any test needing `-Wl,-rpath` in `test/Shell/helper/{build,toolchain}.py` (D58630 for NetBSD added them).
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D94888
lldb-vsdode was communicating the list of modules to the IDE with events, which in practice ended up having some drawbacks
- when debugging large targets, the number of these events were easily 10k, which polluted the messages being transmitted, which caused the following: a harder time debugging the messages, a lag after terminated the process because of these messages being processes (this could easily take several seconds). The latter was specially bad, as users were complaining about it even when they didn't check the modules view.
- these events were rarely used, as users only check the modules view when something is wrong and they try to debug things.
After getting some feedback from users, we realized that it's better to not used events but make this simply a request and is triggered by users whenever they needed.
This diff achieves that and does some small clean up in the existing code.
Differential Revision: https://reviews.llvm.org/D94033
The test couldn't find lldb-server as it's path was being overridden by
LLDB_DEBUGSERVER_PATH environment variable (pointing to debugserver).
This test should always use lldb-server, as it tests its platform
capabilities.
There's no need for the environment override, as lldb-server tests
should test the executable they just built, so I just remote the
override capability.
Linux systems can be configured (and most of them are configured that
way) to disable attaching to unrelated processes, /unless/ those
processes explicitly allow that.
Our test inferiors do that by explicitly calling prctl(PR_SET_PTRACER,
PR_SET_PTRACER_ANY) (a.k.a., lldb_enable_attach). This requires
additional synchronization to ensure that the test does not attempt
attach before that statement is executed.
This is working fine (albeit cumbersome) for most tests but
TestGdbRemoteAttachWait is special in that it wants to start the
inferior _after_ issuing the attach request. This means that the usual
synchronization method does not work.
This patch introduces a different solution -- enable attaching in the
test harness, before the process is launched. Besides fixing this
problem, this is also better because it avoids the need to add special
code to each attach test (which is a common error).
One gotcha here is that it won't work for remote test suites, as we
don't control launching there. However, we could add a similar option to
lldb-platform, or require that lldb-platform itself is started with
attaching enabled. At that point we could delete all lldb_enable_attach
logic.
The test was marked as remote-only, which means it was run ~never, and
accumulated various problems. This commit modifies the test to run
locally and includes a couple of other fixes necessary to make it run:
- moves the "invoke" method into the "Base" test class
- adds []'s around the IP address in a couple more places to make things
work with IPv6
The test is now marked as skipped when running the remote test suite. It
would be possible to make it run both locally and remotely, but this
would require writing a lot special logic for the remote case, and that
is not worth it.
The tests don't work with remote debugservers. This isn't a problem with
any particular test, but the test infrastructure itself, which is why
each of these tests has a @skipIfDarwinEmbedded decorator.
This patch replaces that with a central category-based solution. It also
moves the ad-hoc windows skipping mechanism there too.
This uses the same approach as the debug info tests to avoid needing to
explicitly spell out the two kinds of tests. I convert a handful of
tests to the new mechanism. The rest will be converted in follow-up
patches.
Nearly all of our lldb-server tests have two flavours (lldb-server and
debugserver). Each of them is tagged with an appropriate decorator, and
each of them starts with a call to a matching "init" method. The init
calls are mandatory, and it's not possible to meaningfully combine them
with a different decorator.
This patch leverages the existing decorators to also tag the tests with
the appropriate debug server tag, similar to how we do with debug info
flavours. This allows us to make the "init" calls from inside the common
setUp method.
lldb-server tests are a very special subclass of "api" tests. As they
communicate with lldb-server directly, they don't actually need most of
facilities provided by our TestBase class. In particular, they don't
need the ability to fork debug info flavours of tests (but they could
use debug server flavours).
This makes them inherit from "Base" instead. This avoids the need to
explicitly mark these tests as NO_DEBUG_INFO_TEST_CASE. Two additional
necessary tweaks were:
- move run_platform_command to the base (Base) class. This is used in
one test, and can be generally useful when running tests remotely.
- add a "build" method, forwarding to buildDefault. This is to avoid
updating each test case to use buildDefault (also, "build" sounds
better). It might be interesting to refactor the (Test)Base classes so
that all debug info flavour handling happens in TestBase, and the Base
class provides a simple build method automatically.
Michał Górny