In tryToVectorizeList, under a very limited circumstance (when entered
from tryToVectorizePair), the values may be reordered (swapped) and the
SLP tree is built with the new order. This extends that to the case when
starting from phis in vectorizeChainsInBlock when there are exactly two
phis. The textual order of phi nodes shouldn't really matter. Without
this change, the loop body in the accompnaying test case is fully vectorized
when we swap the orde of the phis but not with this order. While this
doesn't solve the phi-ordering problem in a general way (for more than 2
phis), this is simple fix that piggybacks on an existing mechanism and
is useful in cases like multiplying two complex numbers.
Differential revision: https://reviews.llvm.org/D32065
llvm-svn: 300574
This patch uses lshrInPlace to replace code where the object that lshr is called on is being overwritten with the result.
This adds an lshrInPlace(const APInt &) version as well.
Differential Revision: https://reviews.llvm.org/D32155
llvm-svn: 300566
This patch is part of D28975's breakdown.
Add caching for block masks similar to the cache already used for edge masks,
replacing generation per user with reusing the first generated value which
dominates all uses.
Differential Revision: https://reviews.llvm.org/D32054
llvm-svn: 300557
Before this patch, we always called method 'findCalleeFunctionSamples()' on
intrinsic calls. However, intrinsic calls like llvm.dbg.value() are not viable
candidates for obvious reasons.
No functional change intended.
Differential Revision: https://reviews.llvm.org/D32008
llvm-svn: 300541
The DWARF specification knows 3 kinds of non-empty simple location
descriptions:
1. Register location descriptions
- describe a variable in a register
- consist of only a DW_OP_reg
2. Memory location descriptions
- describe the address of a variable
3. Implicit location descriptions
- describe the value of a variable
- end with DW_OP_stack_value & friends
The existing DwarfExpression code is pretty much ignorant of these
restrictions. This used to not matter because we only emitted very
short expressions that we happened to get right by accident. This
patch makes DwarfExpression aware of the rules defined by the DWARF
standard and now chooses the right kind of location description for
each expression being emitted.
This would have been an NFC commit (for the existing testsuite) if not
for the way that clang describes captured block variables. Based on
how the previous code in LLVM emitted locations, DW_OP_deref
operations that should have come at the end of the expression are put
at its beginning. Fixing this means changing the semantics of
DIExpression, so this patch bumps the version number of DIExpression
and implements a bitcode upgrade.
There are two major changes in this patch:
I had to fix the semantics of dbg.declare for describing function
arguments. After this patch a dbg.declare always takes the *address*
of a variable as the first argument, even if the argument is not an
alloca.
When lowering a DBG_VALUE, the decision of whether to emit a register
location description or a memory location description depends on the
MachineLocation — register machine locations may get promoted to
memory locations based on their DIExpression. (Future) optimization
passes that want to salvage implicit debug location for variables may
do so by appending a DW_OP_stack_value. For example:
DBG_VALUE, [RBP-8] --> DW_OP_fbreg -8
DBG_VALUE, RAX --> DW_OP_reg0 +0
DBG_VALUE, RAX, DIExpression(DW_OP_deref) --> DW_OP_reg0 +0
All testcases that were modified were regenerated from clang. I also
added source-based testcases for each of these to the debuginfo-tests
repository over the last week to make sure that no synchronized bugs
slip in. The debuginfo-tests compile from source and run the debugger.
https://bugs.llvm.org/show_bug.cgi?id=32382
<rdar://problem/31205000>
Differential Revision: https://reviews.llvm.org/D31439
llvm-svn: 300522
Summary: If there is suffix added in the function name (e.g. module hash added by thinLTO), we will not be able to find a match in profile as the suffix does not exist in profile. This patch build a map from function name to Function *. The map includes the entry for the stripped function name so that inlineHotFunctions can find the corresponding function to promote/inline.
Reviewers: davidxl, dnovillo, tejohnson
Reviewed By: davidxl
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D31952
llvm-svn: 300507
The use list is a linked list so getNumUses requires a linear scan through the whole list. hasNUses will stop scanning at N and see if that is the end.
llvm-svn: 300505
So, `cast<Instruction>` is not guaranteed to succeed. Change the
code so that we create a new constant and use it in the newly
created instruction, as it's done in other places in InstCombine.
OK'ed by Sanjay/Craig. Fixes PR32686.
llvm-svn: 300495
Add a top-level STRTAB block containing a string table blob, and start storing
strings for module codes FUNCTION, GLOBALVAR, ALIAS, IFUNC and COMDAT in
the string table.
This change allows us to share names between globals and comdats as well
as between modules, and improves the efficiency of loading bitcode files by
no longer using a bit encoding for symbol names. Once we start writing the
irsymtab to the bitcode file we will also be able to share strings between
it and the module.
On my machine, link time for Chromium for Linux with ThinLTO decreases by
about 7% for no-op incremental builds or about 1% for full builds. Total
bitcode file size decreases by about 3%.
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2017-April/111732.html
Differential Revision: https://reviews.llvm.org/D31838
llvm-svn: 300464
Causes some VGPR usage improvements in shaderdb, but
introduces some SGPR spilling regressions due to random
scheduling changes later.
llvm-svn: 300453
This patch is a generalization of the improvement introduced in rL296898.
Previously, we were able to peel one iteration of a loop to get rid of a Phi that becomes
an invariant on the 2nd iteration. In more general case, if a Phi becomes invariant after
N iterations, we can peel N times and turn it into invariant.
In order to do this, we for every Phi in loop's header we define the Invariant Depth value
which is calculated as follows:
Given %x = phi <Inputs from above the loop>, ..., [%y, %back.edge].
If %y is a loop invariant, then Depth(%x) = 1.
If %y is a Phi from the loop header, Depth(%x) = Depth(%y) + 1.
Otherwise, Depth(%x) is infinite.
Notice that if we peel a loop, all Phis with Depth = 1 become invariants,
and all other Phis with finite depth decrease the depth by 1.
Thus, peeling N first iterations allows us to turn all Phis with Depth <= N
into invariants.
Reviewers: reames, apilipenko, mkuper, skatkov, anna, sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31613
llvm-svn: 300446
When peeling loops basing on phis becoming invariants, we make a wrong loop size check.
UP.Threshold should be compared against the total numbers of instructions after the transformation,
which is equal to 2 * LoopSize in case of peeling one iteration.
We should also check that the maximum allowed number of peeled iterations is not zero.
Reviewers: sanjoy, anna, reames, mkuper
Reviewed By: mkuper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31753
llvm-svn: 300441
If we already called computeKnownBits for the RHS being a constant power of 2, we've already computed everything we can and should just stop. I think previously we would still recurse if we had determined the result was negative or had not determined the sign bit at all.
llvm-svn: 300432
This patch adds new optimization (Folding cmp(sub(a,b),0) into cmp(a,b))
to instCombineCall pass and was written specific for X86 CMP intrinsics.
Differential Revision: https://reviews.llvm.org/D31398
llvm-svn: 300422
This is a version of D32090 that unifies all of the
`getInstrProf*SectionName` helper functions. (Note: the build failures
which D32090 would have addressed were fixed with r300352.)
We should unify these helper functions because they are hard to use in
their current form. E.g we recently introduced more helpers to fix
section naming for COFF files. This scheme doesn't totally succeed at
hiding low-level details about section naming, so we should switch to an
API that is easier to maintain.
This is not an NFC commit because it fixes llvm-cov's testing support
for COFF files (this falls out of the API change naturally). This is an
area where we lack tests -- I will see about adding one as a follow up.
Testing: check-clang, check-profile, check-llvm.
Differential Revision: https://reviews.llvm.org/D32097
llvm-svn: 300381
When checking if we should return a constant, we create some temporary APInts to see if we know all bits. But the exact computations we do are needed in several other locations in the same code.
This patch moves them to named temporaries so we can reuse them.
Ideally we'd write directly to KnownZero/One, but we currently seem to only write those variables after all the simplifications checks and I didn't want to change that with this patch.
Differential Revision: https://reviews.llvm.org/D32094
llvm-svn: 300376
This avoids the confusing 'CS.paramHasAttr(ArgNo + 1, Foo)' pattern.
Previously we were testing return value attributes with index 0, so I
introduced hasReturnAttr() for that use case.
llvm-svn: 300367
...when C1 differs from C2 by one bit and C1 <u C2:
http://rise4fun.com/Alive/Vuo
And move related folds to a helper function. This reduces code duplication and
will make it easier to remove the scalar-only restriction as a follow-up step.
llvm-svn: 300364
We currently only support folding a subtract into a select but not a PHI. This fixes that.
I had to fix an assumption in FoldOpIntoPhi that assumed the PHI node was always in operand 0. Now we pass it in like we do for FoldOpIntoSelect. But we still require some dancing to find the Constant when we create the BinOp or ConstantExpr. This is based code is similar to what we do for selects.
Since I touched all call sites, this also renames FoldOpIntoPhi to foldOpIntoPhi to match coding standards.
Differential Revision: https://reviews.llvm.org/D31686
llvm-svn: 300363
Currently this code always makes 2 or 3 calls to tryFactorization regardless of whether the LHS/RHS are BinaryOperators. We make 3 calls when both operands are BinaryOperators with the same opcode. Or surprisingly, when neither are BinaryOperators. This is because getBinOpsForFactorization returns Instruction::BinaryOpsEnd when the operand is not a BinaryOperator. If both LHS and RHS are not BinaryOperators then they both have an Opcode of Instruction::BinaryOpsEnd. When this happens we rely on tryFactorization to early out due to A/B/C/D being null. Similar behavior occurs for the other calls, we rely on getBinOpsForFactorization having made A/B or C/D null to get tryFactorization to early out.
We also rely on these null checks to check the result of getIdentityValue and early out for it.
This patches refactors this to pull these checks up to SimplifyUsingDistributiveLaws so we don't rely on BinaryOpsEnd as a sentinel or this A/B/C/D null behavior. I think this makes this code easier to reason about. Should also give a tiny performance improvement for cases where the LHS or RHS isn't a BinaryOperator.
Differential Revision: https://reviews.llvm.org/D31913
llvm-svn: 300353
It is cleaner to have a callback based system where the logic of
whether an add recurrence is normalized or not lives on IVUsers.
This is one step in a multi-step cleanup.
llvm-svn: 300330
This patch is part of D28975's breakdown - no change in output intended.
LV's code currently assumes the vectorized loop is a single basic block up
until predicateInstructions() is called. This patch removes two manifestations
of this assumption (loop phi incoming values, dominator tree update) by
replacing the use of vectorLoopBody with the vectorized loop's latch/header.
Differential Revision: https://reviews.llvm.org/D32040
llvm-svn: 300310
Add hasParamAttribute() and use it instead of hasAttribute(ArgNo+1,
Kind) everywhere.
The fact that the AttributeList index for an argument is ArgNo+1 should
be a hidden implementation detail.
NFC
llvm-svn: 300272
For LCSSA purposes, loop BBs not dominating any of the exits aren't
interesting, as none of the values defined in these blocks can be
used outside the loop.
The way the code computed this information was by comparing each
BB of the loop with each of the exit blocks and ask the dominator tree
about their dominance relation. This is slow.
A more efficient way, implemented here, is that of starting from the
exit blocks and walking the dom upwards until we hit an header. By
transitivity, all the blocks we encounter in our path dominate an exit.
For the testcase provided in PR31851, this reduces compile time on
`opt -O2` by ~25%, going from 1m47s to 1m22s.
Thanks to Dan/MichaelZ for discussions/suggesting the approach/review.
Differential Revision: https://reviews.llvm.org/D31843
llvm-svn: 300255
Switch from Euclid's algorithm to Stein's algorithm for computing GCD. This
avoids the (expensive) APInt division operation in favour of bit operations.
Remove all memory allocation from within the GCD loop by tweaking our `lshr`
implementation so it can operate in-place.
Differential Revision: https://reviews.llvm.org/D31968
llvm-svn: 300252
Summary:
Bug noticed by inspection.
Extend the test to handle invokes as well as calls, and rewrite it to
not depend on the inliner and other passes.
Also simplify the call site replacement code with CallSite, similar to
what I did to dead arg elimination and arg promotion (rL300235 and
rL300229).
Reviewers: danielcdh, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32041
llvm-svn: 300251
Sanjoy Das