This fixes llvm.org/PR15033.
Also: Always break before a parameter, if the previous parameter was
split over multiple lines. This was necessary to make the right
decisions in for-loops, almost always makes the code more readable and
also fixes llvm.org/PR14873.
Before:
for (llvm::ArrayRef<NamedDecl *>::iterator I = FD->getDeclsInPrototypeScope()
.begin(), E = FD->getDeclsInPrototypeScope().end();
I != E; ++I) {
}
foo(bar(bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb,
ccccccccccccccccccccccccccccc), d, bar(e, f));
After:
for (llvm::ArrayRef<NamedDecl *>::iterator
I = FD->getDeclsInPrototypeScope().begin(),
E = FD->getDeclsInPrototypeScope().end();
I != E; ++I) {
}
foo(bar(bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb,
ccccccccccccccccccccccccccccc),
d, bar(e, f));
llvm-svn: 175741
This allows MemRegion and MemRegionManager to avoid asking over and over
again whether an class is a virtual base or a non-virtual base.
Minor optimization/cleanup; no functionality change.
llvm-svn: 175716
being included in C++. Don't define alignof or alignas in this case. Note that
the C++11 standard is broken in various ways here (it refers to the contents
of <stdalign.h> in C99, where that header did not exist, and doesn't mention
the alignas macro at all), but we do our best to do what it intended.
llvm-svn: 175708
Matches changes made to SVal's similar functions based on Jordan Rose's review
feedback to r175594.
Also change isKind to take a reference rather than a non-null pointer, while I'm
at it. (& make TypeLoc::isKind private)
llvm-svn: 175704
- When deciding if we can reuse a lazy binding, make sure to check if there
are additional bindings in the sub-region.
- When reading from a lazy binding, don't accidentally strip off casts or
base object regions. This slows down lazy binding reading a bit but is
necessary for type sanity when treating one class as another.
A bit of minor refactoring allowed these two checks to be unified in a nice
early-return-using helper function.
<rdar://problem/13239840>
llvm-svn: 175703
arguments in function prologue is done
with objc_StoreStrong to pair it with
similar objc_StoreStrong for release in function
epilogue. This is done with -O0 only.
// rdar://13145317
llvm-svn: 175698
'long' and 'long long' are different for the purposes of mangling.
This caused <rdar://problem/13254874>.
This reverts commit c2f994d31ec85e9af811af38eb1b28709aef0b2c.
llvm-svn: 175681
which allows grouping parens in an abstract-pack-declarator. This was already
mostly implemented, but missed some cases. Add an ExtWarn for use of this
extension until CWG ratifies it.
llvm-svn: 175660
We now indent the following correctly:
1. some + "literal" /* comment */
"literal";
2. breaking string literals after which we have another string literal.
llvm-svn: 175628
If the code author decides to put empty lines anywhere into the code we
should treat them equally, i.e. reduce them to the configured
MaxEmptyLinesToKeep.
With this change, we e.g. keep the newline in:
SomeType ST = {
// First value
a,
// Second value
b
};
llvm-svn: 175620
An alternative strategy to calculating the break on demand when hitting
a token that would need to be broken would be to put all possible breaks
inside the token into the optimizer.
Currently only supports breaking at spaces; more break points to come.
llvm-svn: 175613
control the visibility of a type for the purposes of RTTI
and template argument restrictions independently of how
visibility propagates to its non-type member declarations.
Also fix r175326 to not ignore template argument visibility
on a template explicit instantiation when a member has
an explicit attribute but the instantiation does not.
The type_visibility work is rdar://11880378
llvm-svn: 175587
for the data specific to a macro definition (e.g. what the tokens are), and
MacroDirective class which encapsulates the changes to the "macro namespace"
(e.g. the location where the macro name became active, the location where it was undefined, etc.)
(A MacroDirective always points to a MacroInfo object.)
Usually a macro definition (MacroInfo) is where a macro name becomes active (MacroDirective) but
splitting the concepts allows us to better model the effect of modules to the macro namespace
(also as a bonus it allows better modeling of push_macro/pop_macro #pragmas).
Modules can have their own macro history, separate from the local (current translation unit)
macro history; MacroDirectives will be used to model the macro history (changes to macro namespace).
For example, if "@import A;" imports macro FOO, there will be a new local MacroDirective created
to indicate that "FOO" became active at the import location. Module "A" itself will contain another
MacroDirective in its macro history (at the point of the definition of FOO) and both MacroDirectives
will point to the same MacroInfo object.
Introducing the separation of macro concepts is the first part towards better modeling of module macros.
llvm-svn: 175585
RegionStoreManager::getInterestingValues() returns a pointer to a
std::vector that lives inside a DenseMap, which is constructed on demand.
However, constructing one such value can lead to constructing another
value, which will invalidate the reference created earlier.
Fixed by delaying the new entry creation until the function returns.
llvm-svn: 175582
attributes yet, so just issue the appropriate diagnostics. Also generalize the
fixit for attributes-in-the-wrong-place code and reuse it here, if attributes
are placed after the access-specifier or 'virtual' in a base specifier.
llvm-svn: 175575
If a base object is at a 0 offset, RegionStoreManager may find a lazy
binding for the entire object, then try to attach a FieldRegion or
grandparent CXXBaseObjectRegion on top of that (skipping the intermediate
region). We now preserve as many layers of base object regions necessary
to make the types match.
<rdar://problem/13239840>
llvm-svn: 175556
I don't want to rule out the possibility of linking to e.g. interesting
blog posts about uses of Clang, so avoid restricting the content to
"projects".
This breaks URL compatibility, but this document was committed less than
an hour ago so hopefully nobody has linked to it yet.
llvm-svn: 175535
Using a new metafunction for detecting the presence of the member
'getDecl' in a type T, added support to hasDeclaration for any such type
T. This allows hasDecl() to be replaced and enables several other
subclasses of clang::Type to use hasDeclaration.
Updated unittests and LibASTMatchersReference.html.
Reviewers: klimek
llvm-svn: 175532
A couple concrete examples are sure to be a win. If you know of any
other external projects using Clang, please let me know!
Patch by Laszlo Nagy! (with a title tweak by me)
llvm-svn: 175529
The key bug was
if (Other.StartOfLineLevel < StartOfLineLevel) ..
instead of
if (Other.StartOfLineLevel != StartOfLineLevel) ..
Also cleaned up the function to be more consistent in the comparisons.
llvm-svn: 175500
We treat this as an alternative to -fvisibility=<?>
which changes the default value visibility to "hidden"
and the default type visibility to "default".
Expose a -cc1 option for changing the default type
visibility, repurposing -fvisibility as the default
value visibility option (also setting type visibility
from it in the absence of a specific option).
rdar://13079314
llvm-svn: 175480
The TypeLoc hierarchy used the llvm::cast machinery to perform undefined
behavior by casting pointers/references to TypeLoc objects to derived types
and then using the derived copy constructors (or even returning pointers to
derived types that actually point to the original TypeLoc object).
Some context is in this thread:
http://lists.cs.uiuc.edu/pipermail/llvmdev/2012-December/056804.html
Though it's spread over a few months which can be hard to read in the mail
archive.
llvm-svn: 175462
if the nul-terminatedness property is important for clients.
Also, don't return the same CXString multiple times. This did not create a
correctness issue in practice because the CXString was of an CXS_Unmanaged
kind, and destruction was a no-op.
llvm-svn: 175455
This commit introduces a set of related changes to ensure that the
declaration that shows up in the identifier chain after deserializing
declarations with a given identifier is, in fact, the most recent
declaration. The primary change involves waiting until after we
deserialize and wire up redeclaration chains before updating the
identifier chains. There is a minor optimization in here to avoid
recursively deserializing names as part of looking to see whether
top-level declarations for a given name exist.
A related change that became suddenly more urgent is to property
record a merged declaration when an entity first declared in the
current translation unit is later deserialized from a module (that had
not been loaded at the time of the original declaration). Since we key
off the canonical declaration (which is parsed, not from an AST file)
for emitted redeclarations, we simply record this as a merged
declaration during AST writing and let the readers merge them.
Re-fixes <rdar://problem/13189985>, presumably for good this time.
llvm-svn: 175447
In builder-type calls, it can be very confusing to just indent
parameters from the start of the line. Instead, indent 4 from the
correct function call.
Before:
aaaaaaaaaaaaaaaaaaa()->aaaaaa(bbbbb)->aaaaaaaaaaaaaaaaaaa( // break
aaaaaaaaaaaaaa);
aaaaaaaaaaaaaaaaaaaaaaa *aaaaaaaaa = aaaaaa->aaaaaaaaaaaa()->aaaaaaaaaaaaaaaa(
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa)
->aaaaaaaaaaaaaaaaa();
After:
aaaaaaaaaaaaaaaaaaa()->aaaaaa(bbbbb)->aaaaaaaaaaaaaaaaaaa( // break
aaaaaaaaaaaaaa);
aaaaaaaaaaaaaaaaaaaaaaa *aaaaaaaaa = aaaaaa->aaaaaaaaaaaa()
->aaaaaaaaaaaaaaaa(
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa)
->aaaaaaaaaaaaaaaaa();
llvm-svn: 175444
An unwrapped line can get moved around if there is no newline before
it and the previous line was formatted.
Example:
template<typename T> // Cursor is on this line when hitting "format"
T *getFETokenInfo() const { return static_cast<T*>(FETokenInfo); }
"return .." is the second unwrapped line in this scenario. I does not
touch any reformatted region. Thus, the result of formatting is:
template <typename T> T *getFETokenInfo() const { return static_cast<T *>(FETokenInfo); }
After second format (and arguably desired end-result):
template <typename T> T *getFETokenInfo() const {
return static_cast<T *>(FETokenInfo);
}
This fixes: llvm.org/PR15060.
llvm-svn: 175440
This fixes llvm.org/PR15248.
Before:
Test::Test(int b) : a(b *b) {}
for (int i = 0; i < a *a; ++i) {}
After:
Test::Test(int b) : a(b * b) {}
for (int i = 0; i < a * a; ++i) {}
llvm-svn: 175439
This allows Clang to detect and deal wih __atomic_* operations properly on
AArch64. Previously we produced an error when encountering them at high
optimisation levels.
llvm-svn: 175438
bitfield related issues.
The original commit broke Takumi's builder. The bug was caused by bitfield sizes
being determined by their underlying type, rather than the field info. A similar
issue with bitfield alignments showed up on closer testing. Both have been fixed
in this patch.
llvm-svn: 175389
An ivar ofset cannot be marked as invariant load in all cases. The ivar offset
is a lazily initialised constant, which is dependent on an objc_msgSend
invocation to perform a fixup of the offset. If the load is being performed on
a method implemented by the class then this load can safely be marked as an
inviarant because a message must have been passed to the class at some point,
forcing the ivar offset to be resolved.
An additional heuristic that can be used to identify an invariant load would be
if the ivar offset base is a parameter to an objc method. However, without the
parameters available at hand, this is currently not possible.
Reviewed-by: John McCall <rjmccall@apple.com>
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
llvm-svn: 175386
Neither of the current clients of CFGRecStmtDeclVisitor are doing
anything with typedefs, so I assume type aliases (C++11 "using")
can be safely ignored. This was causing assertion failures in
the analyzer.
<rdar://problem/13228440>
llvm-svn: 175335
linkonce_odr. Emit construction vtables as internal in this case, since the ABI
does not guarantee that they will be availble externally.
llvm-svn: 175330
until recursive loading is finished.
Otherwise we may end up with a template trying to deserialize a template
parameter that is in the process of getting loaded.
rdar://13135282
llvm-svn: 175329
for distinguishing type vs. value visibility.
The changes to the visibility of explicit specializations
are intentional. The change to the "ugly" test case is
a consequence of a sensible implementation, and I am happy
to argue that this is better behavior. Other changes may
or may not be intended; it is quite difficult to divine
intent from some of the code I altered.
I've left behind a comment which I hope explains the
philosophy behind visibility computation.
llvm-svn: 175326
The current heuristic assumes that there can't be binary operators in
builder-type calls (excluding assigments). However, it also excluded
< and > in general, which is wrong. Now they are only excluded if they
are template parameters.
Before:
return aaaaaaaaaaaaaaaaa->aaaaa().aaaaaaaaaaaaa()i
.aaaaaa() < aaaaaaaaaaaaaaaaaaa->aaaaa().aaaaaaaaaaaaa().aaaaaa();
After:
return aaaaaaaaaaaaaaaaa->aaaaa().aaaaaaaaaaaaa().aaaaaa() <
aaaaaaaaaaaaaaaaaaa->aaaaa().aaaaaaaaaaaaa().aaaaaa();
llvm-svn: 175291
This got lost and was untested as the same effect is achieved by
avoiding bin packing, which is active in Google style by default.
However, moving forward, we want more control over the bin packing
option(s) and thus, this flag should work as expected.
llvm-svn: 175277
This is almost always more readable.
Before:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
? aaaaaaaaaaaaaaaaaaaaaaaaaaa : aaaaaaaaaaaaaaaaaaaaaaaaaaa;
After:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
? aaaaaaaaaaaaaaaaaaaaaaaaaaa
: aaaaaaaaaaaaaaaaaaaaaaaaaaa;
llvm-svn: 175262
This just adds a very simple check that if a DerivedToBase CastExpr is
operating on a value with known C++ object type, and that type is not the
base type specified in the AST, then the cast is invalid and we should
return UnknownVal.
In the future, perhaps we can have a checker that specifies that this is
illegal, but we still shouldn't assert even if the user turns that checker
off.
PR14872
llvm-svn: 175239
...after a host of optimizations related to the use of LazyCompoundVals
(our implementation of aggregate binds).
Originally applied in r173951.
Reverted in r174069 because it was causing hangs.
Re-applied in r174212.
Reverted in r174265 because it was /still/ causing hangs.
If this needs to be reverted again it will be punted to far in the future.
llvm-svn: 175234
Previously, we were scanning the current store. Now, we properly scan the
store that the LazyCompoundVal came from, which may have very different
live symbols.
llvm-svn: 175232
Previously, whenever we had a LazyCompoundVal, we crawled through the
entire store snapshot looking for bindings within the LCV's region. Now, we
just ask for the subregion bindings of the lazy region and only visit those.
This is an optimization (so no test case), but it may allow us to clean up
more dead bindings than we were previously.
llvm-svn: 175230
This is going to be used in the next commit.
While I'm here, tighten up assumptions about symbolic offset
BindingKeys, and make offset calculation explicitly handle all
MemRegion kinds.
No functionality change.
llvm-svn: 175228
In C++, constants captured by lambdas (and blocks) are not actually stored
in the closure object, since they can be expanded at compile time. In this
case, they will have no binding when we go to look them up. Previously,
RegionStore thought they were uninitialized stack variables; now, it checks
to see if they are a constant we know how to evaluate, using the same logic
as r175026.
This particular code path is only for scalar variables. Constant arrays and
structs are still unfortunately unhandled; we'll need a stronger solution
for those.
This may have a small performance impact, but only for truly-undefined
local variables, captures in a non-inlined block, and non-constant globals.
Even then, in the non-constant case we're only doing a quick type check.
<rdar://problem/13105553>
llvm-svn: 175194
Before:
aaaaaaaaaaaaaaaaaaaaaaaa(aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()
.aaaaaaaaaaaaaaaaa());
After:
aaaaaaaaaaaaaaaaaaaaaaaaa(
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa().aaaaaaaaaaaaaaaaa());
Not sure which of the formattings above is better, but we should not pick
one by accident.
llvm-svn: 175165
This gives a clearer separation of the context, e.g. in GMOCK
statements.
Before:
EXPECT_CALL(SomeObject,
SomeFunction(Parameter)).WillRepeatedly(Return(SomeValue));
After:
EXPECT_CALL(SomeObject, SomeFunction(Parameter))
.WillRepeatedly(Return(SomeValue));
Minor format cleanups.
llvm-svn: 175162
So far, clang-format has always assumed the whitespace belonging to the
subsequent token. This has the negative side-effect that when
clang-format formats a line, it does not remove its trailing whitespace,
as it belongs to the next token.
Thus, this patch fixes most of llvm.org/PR15062.
We are not zapping a file's trailing whitespace so far, as this does not
belong to any token we see during formatting. We need to fix this in a
subsequent patch.
llvm-svn: 175152
The formatter can now format:
void aaaaaaaaaaaaaaaaaa(int level,
double *min_x,
double *max_x,
double *min_y,
double *max_y,
double *min_z,
double *max_z, ) {
}
Although this is invalid code, it frequently happens during development and
clang-format should be nicer :-).
llvm-svn: 175151
This fixes llvm.org/PR15179.
Before:
class ColorChooserMac : public content::ColorChooser,
public content::WebContentsObserver {
};
After:
class ColorChooserMac : public content::ColorChooser,
public content::WebContentsObserver {
};
llvm-svn: 175147
The code generation stuff is going to set attributes on the functions it
generates. To do that it needs the target options. Pass them through.
llvm-svn: 175141
I added hasCLanguageLinkage while fixing some language linkage bugs some
time ago so that I wouldn't have to check all users of isExternC. It turned
out to be a much longer detour than expected, but this patch finally
merges the two again. The isExternC function now implements just the
standard notion of having C language linkage.
llvm-svn: 175119
some cases where functions with no language linkage were being treated as having
C language linkage. In particular, don't warn in
extern "C" {
static NonPod foo();
}
Since getLanguageLinkage checks the language linkage, the linkage computation
cannot use the language linkage. Break the loop by checking just the context
in the linkage computation.
llvm-svn: 175117
instantiation in order to permit devirtualization later in codegen, skip over
pure functions since those can't be devirtualization targets.
llvm-svn: 175116
in the course of property synthesis deterministic (ordered
by their type size), instead of having hashtable order
(as it is currently). // rdar://13192366
llvm-svn: 175100
This has so far been disabled for Google style, but should be done
before breaking at nested name specifiers or in template parameters.
Before (in Google style):
template <typename T>
aaaaaaaa::aaaaa::aaaaaa<T, aaaaaaaaaaaaaaaaaaaaaaaaa> aaaaaaaaaaaaaaaaaaaaaaaa<
T>::aaaaaaa() {}
After:
template <typename T>
aaaaaaaa::aaaaa::aaaaaa<T, aaaaaaaaaaaaaaaaaaaaaaaaa>
aaaaaaaaaaaaaaaaaaaaaaaa<T>::aaaaaaa() {}
llvm-svn: 175074
- clear ownership: the SpecificBumpPtrAllocator owns all StateNodes
- this allows us to simplify the memoization data structure into a
std::set (FIXME: figure out whether we want to use a hash based
data structure).
- introduces StateNode as recursive data structure, instead of using
Edge and the Seen-map combined to drill through the graph
- using a count to stabilize the penalty instead of relying on the
container
- pulled out a method to forward-apply states in the end
This leads to a ~40% runtime decrease on Nico's benchmark.
Main FiXME is that the parameter lists of some function get too long.
I'd vote for either pulling the Queue etc into the Formatter proper,
or creating an inner class just for the search algorithm.
llvm-svn: 175051
Previously, we were handling only simple integer constants for globals and
the smattering of implicitly-valued expressions handled by Environment for
default arguments. Now, we can use any integer constant expression that
Clang can evaluate, in addition to everything we handled before.
PR15094 / <rdar://problem/12830437>
llvm-svn: 175026
Still the formatting can be improved, but at least we don't assert any
more. This happened when trying to format lib/Sema/SemaType.cpp.
llvm-svn: 175003
MSVC accepts this:
class A {
A::A();
};
Clang accepts regular member functions with extra qualification as an MS
extension, but not constructors. This changes the parser to defer rejecting
qualified constructors so that the same Sema logic can apply to constructors as
regular member functions. This also improves the error message when MS
extensions are disabled (in my opinion). Before it was:
/Users/jason/Desktop/test.cpp:2:8: error: expected member name or ';' after declaration specifiers
A::A();
~~~~ ^
1 error generated.
After:
/Users/jason/Desktop/test.cpp:2:6: error: extra qualification on member 'A'
A::A();
~~~^
1 error generated.
Patch by Jason Haslam.
llvm-svn: 174980
This redoes how '*' and '&' are classified as pointer / reference markers when
followed by ')', '>', or ','.
Previously, determineStarAmpUsage() marked a single '*' and '&' followed by
')', '>', or ',' as pointer or reference marker. Now, all '*'s and '&'s
preceding ')', '>', or ',' are marked as pointer / reference markers. Fixes
PR14884.
Since only the last '*' in 'int ***' was marked as pointer before (the rest
were unary operators, which don't reach spaceRequiredBetween()),
spaceRequiredBetween() now had to be thought about handing multiple '*'s in
sequence.
Before:
return sizeof(int * *);
Type **A = static_cast<Type * *>(P);
Now:
return sizeof(int**);
Type **A = static_cast<Type **>(P);
While here, also make all methods of AnnotatingParser except parseLine()
private.
Review URL: http://llvm-reviews.chandlerc.com/D384
llvm-svn: 174975
MarkMemberReferenced instead of marking functions referenced directly. An audit
of callers to MarkFunctionReferenced and DiagnoseUseOfDecl also caused a few
other changes:
* don't mark functions odr-used when considering them for an initialization
sequence. Do mark them referenced though.
* the function nominated by the cleanup attribute should be diagnosed.
* operator new/delete should be diagnosed when building a 'new' expression.
llvm-svn: 174951
the linkage of functions and variables while merging declarations from modules,
and we don't necessarily have enough of the rest of the AST loaded at that
point to allow us to compute linkage, so serialize it instead.
llvm-svn: 174943
lexical storage but not visible storage' case in C++. It's unclear whether we
even need the special-case handling for C++, since it seems to be working
around our not serializing a lookup table for the TU in C. But in any case,
the assertion is incorrect.
llvm-svn: 174931
move-constructors and move-assignment operators, use memcpy to copy adjacent
POD members.
Previously, classes with one or more Non-POD members would fall back on
element-wise copies for all members, including POD members. This often
generated a lot of IR. Without padding metadata, it wasn't often possible
for the LLVM optimizers to turn the element-wise copies into a memcpy.
This code hasn't yet received any serious tuning. I didn't see any serious
regressions on a self-hosted clang build, or any of the nightly tests, but
I think it's important to get this out in the wild to get more testing.
Insights, feedback and comments welcome.
Many thanks to David Blaikie, Richard Smith, and especially John McCall for
their help and feedback on this work.
llvm-svn: 174919
These two related tweaks to keep the information associated with a
given identifier correct when the identifier has been given some
top-level information (say, a top-level declaration) and more
information is then loaded from a module. The first ensures that an
identifier that was "interesting" before being loaded from an AST is
considered to be different from its on-disk counterpart. Otherwise, we
lose such changes when writing the current translation unit as a
module.
Second, teach the code that injects AST-loaded names into the
identifier chain for name lookup to keep the most recent declaration,
so that we don't end up confusing our declaration chains by having a
different declaration in there.
llvm-svn: 174895
Before:
for (id foo in[self getStuffFor : bla]) {
}
Now:
for (id foo in [self getStuffFor:bla]) {
}
"in" is treated as loop keyword if the line starts with "for", and as a
regular identifier else. To check for "in", its IdentifierInfo is handed
through a few layers.
llvm-svn: 174889
In google style, trailing comments are separated by two spaces. This
patch fixes the counting of these spaces and prevents clang-format from
creating a line with 81 columns.
llvm-svn: 174879
The more general code for formatting ObjC method exprs does this and more,
it's no longer necessary to special-case this. No behavior change.
llvm-svn: 174843
As it turns out, this already works reasonably well.
This example from http://clang.llvm.org/docs/ObjectiveCLiterals.html
NSDictionary *dictionary = @{
@"name" : NSUserName(),
@"date" : [NSDate date],
@"processInfo" : [NSProcessInfo processInfo]
};
is formatted like
NSDictionary *dictionary = @{ @"name" : NSUserName(), @"date" : [NSDate date],
@"processInfo" : [NSProcessInfo processInfo] };
There's already a FIXME in NestedStaticInitializers about supporting one
initializer per line, which is really all that's missing here too.
llvm-svn: 174842
Before:
@{
foo:
bar
}
;
Now:
@{ foo : bar };
parseBracedList() already does the right thing from an UnwrappedLineParser
perspective, so check for "@{" in all loops that process constructs that can
contain expressions and call parseBracedList() if found.
llvm-svn: 174840
Apple's kernel engineers have been expecting this behavior even though
we've never implemented it before, as far as I can tell. In recent months,
clang has gotten better at using vector instructions to optimize memcpy-like
operations, and that has exposed problems when vector/floating-point
instructions are used in kexts that don't support that. This behavior also
matches what Apple's GCC did for PowerPC targets.
llvm-svn: 174838
For x86 targets, we've been using the -msoft-float option to control passing
the no-implicit-float option to cc1. Since the -mno-implicit-float option is
now accepted by the driver, this just makes it work for x86 the same as it
does for ARM targets.
llvm-svn: 174836
the "nonatomic" attribute in property redeclaration
in class extension. Also, improved on diagnostics in
this area while at it. // rdar://13156292
llvm-svn: 174821
I'm using the name "Extended Identifiers" for the feature because that's
what GCC calls them. According to the standard, the new feature is
"universal character names are now allowed in identifiers", but the more
interesting "feature" is that identifiers can now contain Unicode characters,
however they are written.
llvm-svn: 174798
visible.
The basic problem here is that a given translation unit can use
forward declarations to form pointers to a given type, say,
class X;
X *x;
and then import a module that includes a definition of X:
import XDef;
We will then fail when attempting to access a member of X, e.g.,
x->method()
because the AST reader did not know to look for a default of a class
named X within the new module.
This implementation is a bit of a C-centric hack, because the only
definitions that can have this property are enums, structs, unions,
Objective-C classes, and Objective-C protocols, and all of those are
either visible at the top-level or can't be defined later. Hence, we
can use the out-of-date-ness of the name and the identifier-update
mechanism to force the update.
In C++, we will not be so lucky, and will need a more advanced
solution, because the definitions could be in namespaces defined in
two different modules, e.g.,
// module 1
namespace N { struct X; }
// module 2
namespace N { struct X { /* ... */ }; }
One possible implementation here is for C++ to extend the information
associated with each identifier table to include the declaration IDs
of any definitions associated with that name, regardless of
context. We would have to eagerly load those definitions.
llvm-svn: 174794
Add warnings under -Wc++11-compat, -Wc++98-compat, and -Wc99-compat when a
particular UCN is incompatible with a different standard, and -Wunicode when
a UCN refers to a surrogate character in C++03.
llvm-svn: 174788
The missing definition check should be in the same category as the
missing ivar validation - in this case, the intent is to invalidate in
the given class, as described in the declaration, but the implementation
does not perform the invalidation. Whereas the MissingInvalidationMethod
checker checks the cases where the method intention is not to
invalidate. The second checker has potential to have a much higher false
positive rate.
llvm-svn: 174787
Chad Rosier