but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "bad string index" for bad string indexes. Updated the error message
in the llvm-objdump test, and added tests to show llvm-nm prints
"bad string index" and a test to print the actual bad string index value
which in this case is 0xfe000002 when printing the fields as raw hex.
llvm-svn: 258520
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "(?,?)" or just "s" for bad section indexes. Also added a test to show
it prints the bad section index of "42" when printing the fields as raw hex.
llvm-svn: 258434
Summary:
Add components back into calls to llvm-config,
which was accidentally removed in r258283.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16392
llvm-svn: 258383
This patch adds the necessary plumbing to cmake to build the sources related to
GlobalISel.
To build the sources related to GlobalISel, we need to add -DBUILD_GLOBAL_ISEL=ON.
By default, this is OFF, thus GlobalISel sources will not impact people that do
not explicitly opt-in.
Differential Revision: http://reviews.llvm.org/D15983
llvm-svn: 258344
Some architecture specific ELF section flags might have the same value
(for example SHF_X86_64_LARGE and SHF_HEX_GPREL) and we have to check
machine architectures to select an appropriate set of possible flags.
The patch selects architecture specific flags into separate arrays
`ElfxxxSectionFlags` and combines `ElfSectionFlags` and `ElfxxxSectionFlags`
before pass to the `StreamWriter::printFlags()` method.
Differential Revision: http://reviews.llvm.org/D16269
llvm-svn: 258334
This addresses PR26060 where function lto_module_create() could return nullptr
but lto_get_error_message() returned an empty string.
The error() call after LTOModule::createFromFile() in llvm-lto is then removed
because any error from this function should go through the diagnostic handler in
llvm-lto which will exit the program. The error() call was added because this
previously did not happen when the file was non-existent. This is fixed by the
patch. (The situation that llvm-lto reports an error when the input file does
not exist is tested by llvm/tools/llvm-lto/error.ll).
Differential Revision: http://reviews.llvm.org/D16106
llvm-svn: 258298
Summary:
This is a re-commit of r257003, which was reverted,
along with the fixes from http://reviews.llvm.org/D15986.
r252532 added support for reporting the monolithic library
when LLVM_BUILD_LLVM_DYLIB is used. This would only be done
if the individual components were not found, and the dynamic
library is found.
This diff extends this as follows:
- If LLVM_LINK_LLVM_DYLIB is set, then prefer the shared
library, even if all component libraries exist.
- Two flags, --link-shared and --link-static are introduced
to provide explicit guidance. If --link-shared is passed
and the shared library does not exist, an error results.
Additionally, changed the expected shared library names from
(e.g.) LLVM-3.8.0 to LLVM-3.8. The former exists only in an
installation (and then only in CMake builds I think?), and not
in the build tree; this breaks usage of llvm-config during
builds, e.g. by llvm-go.
Reviewers: DiamondLovesYou, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15986
llvm-svn: 258283
Summary:
Currently llvm::SplitModule as the first step globalizes all local objects, which might not be desirable in some scenarios.
This change adds a new flag to llvm::SplitModule that uses SCC approach to search for a balanced partition without the need to externalize symbols.
Such partition might not be possible or fully balanced for a given number of partitions, and is a function of the module properties (global/local dependencies within the module).
Joint development Tobias Edler von Koch (tobias@codeaurora.org) and Sergei Larin (slarin@codeaurora.org)
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D16124
llvm-svn: 258083
MIPS 32-bit ABI uses REL relocation record format to save dynamic
relocations. The patch teaches llvm-readobj to show dynamic relocations
in this format.
Differential Revision: http://reviews.llvm.org/D16114
llvm-svn: 258001
Entry block count was not counted and is corrected. Also
introduce a new metric that is MaxInternalBlockCount which
show command shows (as before).
llvm-svn: 257987
This is part of a new statistics gathering feature for the sanitizers.
See clang/docs/SanitizerStats.rst for further info and docs.
Differential Revision: http://reviews.llvm.org/D16174
llvm-svn: 257970
This reverts commit r257751, bringing back r256105.
The problem the assert found was fixed in r257915.
Original commit message:
Assert that we have all use/users in the getters.
An error that is pretty easy to make is to use the lazy bitcode reader
and then do something like
if (V.use_empty())
The problem is that uses in unmaterialized functions are not accounted
for.
This patch adds asserts that all uses are known.
llvm-svn: 257920
# The first commit's message is:
Revert "[ARM] Add DSP build attribute and extension targeting"
This reverts commit b11cc50c0b4a7c8cdb628abc50b7dc226ff583dc.
# This is the 2nd commit message:
Revert "[ARM] Add new system registers to ARMv8-M Baseline/Mainline"
This reverts commit 837d08454e3e5beb8581951ac26b22fa07df3cd5.
llvm-svn: 257916
Added forgotten ELFDumper.cpp to commit.
Initial commit message:
[llvm-readobj] Add support for TLSDESC_PLT and TLSDESC_GOT dynamic section tags to the llvm-readobj.
If module uses uses lazy TLSDESC relocations it should define DT_TLSDESC_PLT and DT_TLSDESC_GOT entries.
They were unknown for llvm-readobj before this patch.
Differential revision: http://reviews.llvm.org/D16224
llvm-svn: 257914
classes.
OrcRemoteTargetClient::RCMemoryManager will now register EH frames with the
server automatically. This allows remote-execution of code that uses exceptions.
llvm-svn: 257816
These fields are almost always zero. However, there are relocations
against them, and we should print the relocation symbol with it as
SYM+0xNN.
llvm-svn: 257776
Binary annotations are encoded along the lines of UTF-8 and ECI but with
a few minor differences.
The algorithm specified in "ECMA-335 CLI Section II.3.2 - Blobs and
Signatures" is used to compress binary annotations. Signed binary
annotations are encoded like unsigned annotations except the sign bit is
rotated left to reduce the number of bits needed to be encoded.
llvm-svn: 257742
Moves some .def files into include/DebugInfo/CodeView.
Aslo remove a 'using namespace' directive from a header in readobj and
update the uses of the endian helper types to compensate.
llvm-svn: 257712
This adds a detailed profile summary in llvm-profdata. The summary is in the
form of one or more triples of the form (P, N, M) which is interpreted as if
we look at the Top-N counts in the profile, their sum accounts for P percentage
of the sum of all counts in the program and the minimum count in the Top-N is M.
Differential Revision: http://reviews.llvm.org/D16005
llvm-svn: 257680
This rewrites and expands the existing codeview dumping functionality in
llvm-readobj using techniques similar to those in lib/Object. This defines a
number of new records and enums useful for reading memory mapped codeview
sections in COFF objects.
The dumper is intended as a testing tool for LLVM as it grows more codeview
output capabilities.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D16104
llvm-svn: 257658
When we arrive at the end of the function, the validation of
the object has been done already. In theory, so, we should never
arrive here with something broken as the object isn't mutated.
Practice sometimes proves theory to be wrong, so leave an assertion
instead, as suggested by David Blaikie, to catch bugs.
llvm-svn: 257570
This change has us print out fields we didn't previously understand. To
improve readability, we now group column information with it's
respective line.
llvm-svn: 257552
to only print the first private header.
Which for Mach-O files only prints the Mach header and not the subsequent load
commands. Which is used by scripts to match what the darwin otool(1) with the
-h flag does without the -l flag.
For non-Mach-O files it has the same functionality as -private-headers (with
the trailing ’s’).
rdar://24158331
llvm-svn: 257548
A request has been made to the official registry, but an official value is
not yet available. This patch uses a temporary value in order to support
development. When an official value is recieved, the value of EM_WEBASSEMBLY
will be updated.
llvm-svn: 257517
The new ORC remote-JITing support provides a superset of the old code's
functionality, so we can replace the old stuff. As a bonus, a couple of
previously XFAILed tests have started passing.
llvm-svn: 257343
Summary:
r252532 added support for reporting the monolithic library
when LLVM_BUILD_LLVM_DYLIB is used. This would only be done
if the individual components were not found, and the dynamic
library is found.
This diff extends this as follows:
- If LLVM_LINK_LLVM_DYLIB is set, then prefer the shared
library, even if all component libraries exist.
- Two flags, --link-shared and --link-static are introduced
to provide explicit guidance. If --link-shared is passed
and the shared library does not exist, an error results.
Additionally, changed the expected shared library names from
(e.g.) LLVM-3.8.0 to LLVM-3.8. The former exists only in an
installation (and then only in CMake builds I think?), and not
in the build tree; this breaks usage of llvm-config during
builds, e.g. by llvm-go.
Reviewers: DiamondLovesYou, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15033
llvm-svn: 257003
This replicates the logic of Darwin dwarfdump for manually opening up
.dSYM bundles without introducing any new dependencies.
<rdar://problem/20491670>
llvm-svn: 256350
It turns out that his is *really* slow. With this change the link of
clang with plugin-opt=emit-llvm goes from 41 to 26 seconds.
We can add an option to enable it again if needed.
llvm-svn: 256302
Today, we always take into account the possibility that object files
produced by MC may be consumed by an incremental linker. This results
in us initialing fields which vary with time (TimeDateStamp) which harms
hermetic builds (e.g. verifying a self-host went well) and produces
sub-optimal code because we cannot assume anything about the relative
position of functions within a section (call sites can get redirected
through incremental linker thunks).
Let's provide an MCTargetOption which controls this behavior so that we
can disable this functionality if we know a-priori that the build will
not rely on /incremental.
llvm-svn: 256203
With the support of value profiling added, the Indexed prof
reader gets less efficient. The prof reader initialization
used to be just reading the file header, but with VP support
added, initialization needs to walk through all profile keys
of ondisk hash table resulting in very poor locality and large
memory increase (keys are stored together with the profile data
in the mapped profile buffer). Even worse, when the reader is
used by the compiler (not llvm-profdata too), the penalty becomes
very high as compilation of each single module requires touching
profile data buffer for the whole program.
In this patch, the icall target values (MD5hash) are no longer eargerly
converted back to name strings when the data is read into memory. New
interface is added to to profile reader so that InstrProfSymtab can be
lazily created for Indexed profile reader on-demand. Creating of the
symtab is intended to be used by llvm-profdata tool for symbolic dumping
of VP data. It can be used with compiler (for legacy out of tree uses)
too but not recommended due to compile time and memory reasons
mentioned above.
Some other cleanups are also included: Function Addr to md5 map is now
consolated into InstrProfSymtab. InstrProfStringtab is no longer used and
eliminated.
llvm-svn: 256114
An error that is pretty easy to make is to use the lazy bitcode reader
and then do something like
if (V.use_empty())
The problem is that uses in unmaterialized functions are not accounted
for.
This patch adds asserts that all uses are known.
llvm-svn: 256105
This deprecates:
* LLVMParseBitcode
* LLVMParseBitcodeInContext
* LLVMGetBitcodeModuleInContext
* LLVMGetBitcodeModule
They are replaced with the functions with a 2 suffix which do not record
a diagnostic.
llvm-svn: 256065
This inlines materializeAll into the only caller
(materializeAllPermanently) and renames materializeAllPermanently to
just materializeAll.
llvm-svn: 256024
LLVM MC has single methods which can handle the output of EH frame and DWARF CIE's and FDE's.
This code improves DWARFDebugFrame::parse to do the same for parsing.
This also allows llvm-objdump to support the --dwarf=frames option which objdump supports. This
option dumps the .eh_frame section using the new code in DWARFDebugFrame::parse.
http://reviews.llvm.org/D15535
Reviewed by Rafael Espindola.
llvm-svn: 256008
Type specific declarations have been moved to Type.h and error handling
routines have been moved to ErrorHandling.h. Both are included in Core.h
so nothing should change for projects directly including the headers,
but transitive dependencies may be affected.
llvm-svn: 255965
Summary:
Second patch split out from http://reviews.llvm.org/D14752.
Maps metadata as a post-pass from each module when importing complete,
suturing up final metadata to the temporary metadata left on the
imported instructions.
This entails saving the mapping from bitcode value id to temporary
metadata in the importing pass, and from bitcode value id to final
metadata during the metadata linking postpass.
Depends on D14825.
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14838
llvm-svn: 255909
Summary: Surface counter overflow when merging profile data. Merging still occurs on overflow but counts saturate to the maximum representable value. Overflow is reported to the user.
Reviewers: davidxl, dnovillo, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15547
llvm-svn: 255825
Summary:
Using the blacklist the user can filter own unwanted functions
from all outputs. By default blacklist contains "fun:__sancov*" line.
Differential Revision: http://reviews.llvm.org/D15364
llvm-svn: 255732
Summary:
This change adds support for specifying a weight when merging profile data with the llvm-profdata tool.
Weights are specified by using the --weighted-input=<weight>,<filename> option. Input files not specified
with this option (normal positional list after options) are given a default weight of 1.
Adding support for arbitrary weighting of input profile data allows for relative importance to be placed on the
input data from multiple training runs.
Both sampled and instrumented profiles are supported.
Reviewers: davidxl, dnovillo, bogner, silvas
Subscribers: silvas, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D15306
llvm-svn: 255659
The symbol being printed in this field comes from the main symbol table,
not 0xF1 subsection. Use LinkageName to make that a lot clearer.
llvm-svn: 255596
This patch converts code that has access to a LLVMContext to not take a
diagnostic handler.
This has a few advantages
* It is easier to use a consistent diagnostic handler in a single program.
* Less clutter since we are not passing a handler around.
It does make it a bit awkward to implement some C APIs that return a
diagnostic string. I will propose new versions of these APIs and
deprecate the current ones.
llvm-svn: 255571
This code adds some simple decoding of the FDE's in an eh_frame.
There's still more to be done in terms of error handling and verification.
Also, we need to be able to decode the CFI's.
llvm-svn: 255550
This is the start of work to dump the contents of the eh_frame section.
It currently emits CIE entries. FDE entries will come later.
It also needs improved error checking which will follow soon.
http://reviews.llvm.org/D15502
Reviewed by Kevin Enderby and Lang Hames.
llvm-svn: 255546
It turns out that terminatepad gives little benefit over a cleanuppad
which calls the termination function. This is not sufficient to
implement fully generic filters but MSVC doesn't support them which
makes terminatepad a little over-designed.
Depends on D15478.
Differential Revision: http://reviews.llvm.org/D15479
llvm-svn: 255522
It's O(N^2) because it does a simple walk through the existing types to
find duplicates, but that will be fixed in a follow-up commit to use a
mapping data structure of some kind.
llvm-svn: 255482
While we have successfully implemented a funclet-oriented EH scheme on
top of LLVM IR, our scheme has some notable deficiencies:
- catchendpad and cleanupendpad are necessary in the current design
but they are difficult to explain to others, even to seasoned LLVM
experts.
- catchendpad and cleanupendpad are optimization barriers. They cannot
be split and force all potentially throwing call-sites to be invokes.
This has a noticable effect on the quality of our code generation.
- catchpad, while similar in some aspects to invoke, is fairly awkward.
It is unsplittable, starts a funclet, and has control flow to other
funclets.
- The nesting relationship between funclets is currently a property of
control flow edges. Because of this, we are forced to carefully
analyze the flow graph to see if there might potentially exist illegal
nesting among funclets. While we have logic to clone funclets when
they are illegally nested, it would be nicer if we had a
representation which forbade them upfront.
Let's clean this up a bit by doing the following:
- Instead, make catchpad more like cleanuppad and landingpad: no control
flow, just a bunch of simple operands; catchpad would be splittable.
- Introduce catchswitch, a control flow instruction designed to model
the constraints of funclet oriented EH.
- Make funclet scoping explicit by having funclet instructions consume
the token produced by the funclet which contains them.
- Remove catchendpad and cleanupendpad. Their presence can be inferred
implicitly using coloring information.
N.B. The state numbering code for the CLR has been updated but the
veracity of it's output cannot be spoken for. An expert should take a
look to make sure the results are reasonable.
Reviewers: rnk, JosephTremoulet, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D15139
llvm-svn: 255422
Quoting from the comment added to the code:
// Objective-C on i386 uses artificial absolute symbols to
// perform some link time checks. Those symbols have a fixed 0
// address that might conflict with real symbols in the object
// file. As I cannot see a way for absolute symbols to find
// their way into the debug information, let's just ignore those.
llvm-svn: 255350
Ensure we release the files even when they don't hold a function index
summary section, by restructuring the control flow a little bit.
llvm-svn: 255256
A linker normally has two stages: symbol resolution and "moving stuff".
In lib/Linker there is the complication of lazy linking some globals,
but it was still far more mixed than it needed to.
This splits the linker into a lower level IRMover and the linker proper.
The IRMover just takes a list of globals to move and a callback that
lets the user control what is lazy linked.
The main motivation is that now tools/gold (and soon lld) can use their
own symbol resolution to instruct IRMover what to do.
llvm-svn: 255254
This is a preliminary change towards deduplicating type units based on
their signatures. Next change will skip emission of types when their
signature has already been seen.
llvm-svn: 255154
Summary:
The order of destructors in LTOCodeGenerator gets changed in r254696.
It is possible for LTOCodeGenerator to have a MergedModule created in
the OwnedContext, in which case the module must be destructed before
the context.
Reviewers: rafael, dexonsmith
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D15346
llvm-svn: 255092
Cloning the module was supposed to guard against the possibility
that the passes may be non-idempotent. However, for some reason
I decided to put that AFTER the passes had already run on the
module, defeating the point entirely. Fix that by moving up the
CloneModule as is done in llc.
llvm-svn: 254819
`Out` can be null if no output is requested, so move any access
to it inside the conditional. Thanks to Justin Bogner for finding
this.
llvm-svn: 254804
Before this patch the diagnostic handler was optional. If it was not
passed, the one in the LLVMContext was used.
That is probably not a pattern we want to follow. If each area has an
optional callback, there is a sea of callbacks and it is hard to follow
which one is called.
Doing this also found cases where the callback is a nice addition, like
testing that no errors or warnings are reported.
The other option is to always use the diagnostic handler in the
LLVMContext. That has a few problems
* To implement the C API we would have to set the diag handler and then
set it back to the original value.
* Code that creates the context might be far away from code that wants
the diagnostics.
I do have a patch that implements the second option and will send that as
an RFC.
llvm-svn: 254777
Summary: Lately, I have submitted a number of patches to fix bugs that
only occurred when using the same pass manager to compile multiple
modules (generally these bugs are failure to reset some persistent
state). Unfortunately I don't think there is currently a way to test
that from the command line. This adds a very simple flag to both llc
and opt, under which the tools will simply re-run their respective
pass pipelines using the same pass manager on (a clone of the same
module). Additionally, we verify that both outputs are bitwise the
same.
Reviewers: yaron.keren
Subscribers: loladiro, yaron.keren, kcc, llvm-commits
Differential Revision: http://reviews.llvm.org/D14965
llvm-svn: 254774
This probably shouldn't be generated in the .dwo file for CUs, only for
TUs, but it's in the sample .dwos (generated by clang) so dwp should
reflect that.
Arguably the DWP tool could be smart enough to know that the CUs
shouldn't need a debug_line.dwo section and skip that even when it's
legitimately generated for TUs, but that's a bit more off-book.
llvm-svn: 254767
Kevin Enderby