now -funique-internal-linkage-name flag is available, and we want to flip
it on by default since it is beneficial to have separate sample profiles
for different internal symbols with the same name. As a preparation, we
want to avoid regression caused by the flip.
When we flip -funique-internal-linkage-name on, the profile is collected
from binary built without -funique-internal-linkage-name so it has no uniq
suffix, but the IR in the optimized build contains the suffix. This kind of
mismatch may introduce transient regression.
To avoid such mismatch, we introduce a NameTable section flag indicating
whether there is any name in the profile containing uniq suffix. Compiler
will decide whether to keep uniq suffix during name canonicalization
depending on the NameTable section flag. The flag is only available for
extbinary format. For other formats, by default compiler will keep uniq
suffix so they will only experience transient regression when
-funique-internal-linkage-name is just flipped.
Another type of regression is caused by places where we miss to call
getCanonicalFnName. Those places are fixed.
Differential Revision: https://reviews.llvm.org/D96932
sample loader pass.
In https://reviews.llvm.org/rG5fb65c02ca5e91e7e1a00e0efdb8edc899f3e4b9,
to prevent repeated indirect call promotion for the same indirect call
and the same target, we used zero-count value profile to indicate an
indirect call has been promoted for a certain target. We removed
PromotedInsns cache in the same patch. However, there was a problem in
that patch described below, and that problem led me to add PromotedInsns
back as a mitigation in
https://reviews.llvm.org/rG4ffad1fb489f691825d6c7d78e1626de142f26cf.
When we get value profile from metadata by calling getValueProfDataFromInst,
we need to specify the maximum possible number of values we expect to read.
We uses MaxNumPromotions in the last patch so the maximum number of value
information extracted from metadata is MaxNumPromotions. If we have many
values including zero-count values when we write the metadata, some of them
will be dropped when we read them because we only read MaxNumPromotions
values. It will allow repeated indirect call promotion again. We need to
make sure if there are values indicating promoted targets, those values need
to be saved in metadata with higher priority than other values.
The patch fixed that problem. We change to use -1 to represent the count
of a promoted target instead of 0 so it is easier to sort the values.
When we prepare to update the metadata in updateIDTMetaData, we will sort
the values in the descending count order and extract only MaxNumPromotions
values to write into metadata. Since -1 is the max uint64_t number, if we
have equal to or less than MaxNumPromotions of -1 count values, they will
all be kept in metadata. If we have more than MaxNumPromotions of -1 count
values, we will only save MaxNumPromotions such values maximally. In such
case, we have logic in place in doesHistoryAllowICP to guarantee no more
promotion in sample loader pass will happen for the indirect call, because
it has been promoted enough.
With this change, now we can remove PromotedInsns without problem.
Differential Revision: https://reviews.llvm.org/D97350
Dangling probes are the probes associated to an empty block. This usually happens when all real instructions are optimized away from the block. There is a problem with dangling probes during the offline counts processing. The way the sample profiler works is that samples collected on the first physical instruction following a probe will be counted towards the probe. This logically equals to treating the instruction next to a probe as if it is from the same block of the probe. In the dangling probe case, the real instruction following a dangling probe actually starts a new block, and samples collected on the new block may cause issues when counted towards the empty block.
To mitigate this issue, we first try to move around a dangling probe inside its owning block. If there are still native instructions preceding the probe in the same block, we can then use them as a place holder to collect samples for the probe. A pass is added to walk each block backwards looking for probes not followed by any real instruction and moving them before the first real instruction. This is done right before the object emission.
If we are unlucky to find such in-block preceding instructions for a probe, the solution we are taking is to tag such probe as dangling so that the samples reported for them will not be trusted by the compiler. We leave it up to the counts inference algorithm to get such probes a reasonable count. The number `UINT64_MAX` is used to mark sample count as collected for a dangling probe.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D95962
into profile symbol list.
When test is unrepresentative to production behavior, sample profile
collected from production can cause unexpected performance behavior
in test. To triage such issue, it is useful to have a cutoff flag
to control how many symbols will be included into profile symbol list
in order to do binary search.
Differential Revision: https://reviews.llvm.org/D97623
Under certain (currently unknown) conditions, llvm-profdata is outputting
profiles that have two consecutive entries in the MemOPSize section for the
value 0. This causes the PGOMemOPSizeOpt pass to output an invalid switch
instruction with two cases for 0. As mentioned, we’re not quite sure what’s
causing this to happen, but this patch prevents llvm-profdata from outputting a
profile that has this problem and gives an error with a request for a
reproducible.
Differential Revision: https://reviews.llvm.org/D92074
Found a problem in indirect call promotion in sample loader pass. Currently
if an indirect call is promoted for a target, and if the parent function is
inlined into some other function, the indirect call can be promoted for the
same target again. That is redundent which can harm performance and can cause
excessive compile time in some extreme case.
The patch fixes the issue. If a target is promoted for an indirect call, the
patch will write ICP metadata with the target call count being set to 0.
In the later ICP in sample profile loader, if it sees a target has 0 count
for an indirect call, it knows the target has been promoted and won't do
indirect call promotion for the indirect call.
The fix brings 0.1~0.2% performance on our search benchmark.
Differential Revision: https://reviews.llvm.org/D96806
We currently always store absolute filenames in coverage mapping. This
is problematic for several reasons. It poses a problem for distributed
compilation as source location might vary across machines. We are also
duplicating the path prefix potentially wasting space.
This change modifies how we store filenames in coverage mapping. Rather
than absolute paths, it stores the compilation directory and file paths
as given to the compiler, either relative or absolute. Later when
reading the coverage mapping information, we recombine relative paths
with the working directory. This approach is similar to handling
ofDW_AT_comp_dir in DWARF.
Finally, we also provide a new option, -fprofile-compilation-dir akin
to -fdebug-compilation-dir which can be used to manually override the
compilation directory which is useful in distributed compilation cases.
Differential Revision: https://reviews.llvm.org/D95753
We currently always store absolute filenames in coverage mapping. This
is problematic for several reasons. It poses a problem for distributed
compilation as source location might vary across machines. We are also
duplicating the path prefix potentially wasting space.
This change modifies how we store filenames in coverage mapping. Rather
than absolute paths, it stores the compilation directory and file paths
as given to the compiler, either relative or absolute. Later when
reading the coverage mapping information, we recombine relative paths
with the working directory. This approach is similar to handling
ofDW_AT_comp_dir in DWARF.
Finally, we also provide a new option, -fprofile-compilation-dir akin
to -fdebug-compilation-dir which can be used to manually override the
compilation directory which is useful in distributed compilation cases.
Differential Revision: https://reviews.llvm.org/D95753
This reverts commit 310b35304c.
The build is broken with -DBUILD_SHARED_LIBS=ON :
lib/ProfileData/CMakeFiles/LLVMProfileData.dir/SampleProfileLoaderBaseUtil.cpp.o: In function `llvm::sampleprofutil::callsiteIsHot(llvm::sampleprof::FunctionSamples const*, llvm::ProfileSummaryInfo*, bool)':
SampleProfileLoaderBaseUtil.cpp:(.text._ZN4llvm14sampleprofutil13callsiteIsHotEPKNS_10sampleprof15FunctionSamplesEPNS_18ProfileSummaryInfoEb+0x1a): undefined reference to `llvm::ProfileSummaryInfo::isColdCount(unsigned long) const'
SampleProfileLoaderBaseUtil.cpp:(.text._ZN4llvm14sampleprofutil13callsiteIsHotEPKNS_10sampleprof15FunctionSamplesEPNS_18ProfileSummaryInfoEb+0x28): undefined reference to `llvm::ProfileSummaryInfo::isHotCount(unsigned long) const'
...
Refactor SampleProfile.cpp to use the core code in CodeGen.
The main changes are:
(1) Move SampleProfileLoaderBaseImpl class to a header file.
(2) Split SampleCoverageTracker to a head file and a cpp file.
(3) Move the common codes (common options and callsiteIsHot())
to the common cpp file.
Differential Revision: https://reviews.llvm.org/D96455
To align with https://reviews.llvm.org/D95547, we need to add brackets for context id before initializing the `SampleContext`.
Also added test cases for extended binary format from llvm-profgen side.
Differential Revision: https://reviews.llvm.org/D95929
Context-sensitive profile effectively split a function profile into many copies each representing the CFG profile of a particular calling context. That makes the count distribution looks more flat as we now have more function profiles each with lower counts, which in turn leads to lower hot thresholds. Now we tells threshold computation to merge context profile first before calculating percentile based cutoffs to compensate for seemingly flat context profile. This can be controlled by swtich `sample-profile-contextless-threshold`.
Earlier measurement showed ~0.4% perf boost with this tuning on spec2k6 for CSSPGO (with pseudo-probe and new inliner).
Differential Revision: https://reviews.llvm.org/D95980
Fixing up a couple places where `getCallSiteIdentifier` is needed to support pseudo-probe-based callsites.
Also fixing an issue in the extbinary profile reader where the metadata section is not fully scanned based on the number of profiles loaded only for the current module.
Reviewed By: wmi, wenlei
Differential Revision: https://reviews.llvm.org/D95791
This change brings up support of context-sensitive profiles in the format of extended binary. Existing sample profile reader/writer/merger code is being tweaked to reflect the fact of bracketed input contexts, like (`[...]`). The paired brackets are also needed in extbinary profiles because we don't yet have an otherwise good way to tell calling contexts apart from regular function names since the context delimiter `@` can somehow serve as a part of the C++ mangled names.
Reviewed By: wmi, wenlei
Differential Revision: https://reviews.llvm.org/D95547
separate sections.
For ThinLTO, all the function profiles without context has been annotated to
outline functions if possible in prelink phase. In postlink phase, profile
annotation in postlink phase is only meaningful for function profile with
context. If the profile is large, it is better to split the profile into two
parts, one with context and one without, so the profile reading in postlink
phase only has to read the part with context. To have the profile splitting,
we extend the ExtBinary format to support different section arrangement. It
will be flexible to add other section layout in the future without the need
to create new class inheriting from ExtBinary class.
Differential Revision: https://reviews.llvm.org/D94435
This is an enhancement to LLVM Source-Based Code Coverage in clang to track how
many times individual branch-generating conditions are taken (evaluate to TRUE)
and not taken (evaluate to FALSE). Individual conditions may comprise larger
boolean expressions using boolean logical operators. This functionality is
very similar to what is supported by GCOV except that it is very closely
anchored to the ASTs.
Differential Revision: https://reviews.llvm.org/D84467
Silence clang static analyzer warning that 'fn' could still be in an undefined state - this shouldn't happen depending on the likely tag order, but the analyzer can't know that.
in ExtBinary format.
Currently ExtBinary format doesn't support multiple sections with the same type
in the profile. We add the support in this patch. Previously we use the section
type to identify a section uniquely. Now we introduces a LayoutIndex in the
SecHdrTableEntry and use the LayoutIndex to locate the target section. The
allocations of NameTable and FuncOffsetTable are adjusted accordingly.
Currently it works as a NFC because it won't change anything for current layout.
The test for multiple sections support will be included in another patch where a
new type of profile containing multiple sections with the same type is
introduced.
Differential Revision: https://reviews.llvm.org/D93254
This change enables pseudo-probe-based sample counts to be consumed by the sample profile loader under the regular `-fprofile-sample-use` switch with minimal adjustments to the existing sample file formats. After the counts are imported, a probe helper, aka, a `PseudoProbeManager` object, is automatically launched to verify the CFG checksum of every function in the current compilation against the corresponding checksum from the profile. Mismatched checksums will cause a function profile to be slipped. A `SampleProfileProber` pass is scheduled before any of the `SampleProfileLoader` instances so that the CFG checksums as well as probe mappings are available during the profile loading time. The `PseudoProbeManager` object is set up right after the profile reading is done. In the future a CFG-based fuzzy matching could be done in `PseudoProbeManager`.
Samples will be applied only to pseudo probe instructions as well as probed callsites once the checksum verification goes through. Those instructions are processed in the same way that regular instructions would be processed in the line-number-based scenario. In other words, a function is processed in a regular way as if it was reduced to just containing pseudo probes (block probes and callsites).
**Adjustment to profile format **
A CFG checksum field is being added to the existing AutoFDO profile formats. So far only the text format and the extended binary format are supported. For the text format, a new line like
```
!CFGChecksum: 12345
```
is added to the end of the body sample lines. For the extended binary profile format, we introduce a metadata section to store the checksum map from function names to their CFG checksums.
Differential Revision: https://reviews.llvm.org/D92347
gcov computes the line execution count as the sum of (a) counts from
predecessors on other lines and (b) the sum of loop execution counts of blocks
on the same line (think of loops on one line).
For (b), we use Donald B. Johnson's cycle enumeration algorithm and perform
cycle cancelling for each cycle. This number of candidate cycles were
exponential and D93036 made it polynomial by skipping zero count cycles. The
time complexity is high (O(V*E^2) (it could be O(E^2) but the linear `Blocks`
check made it higher) and the implementation is complex.
We could just identify loops and sum all back edges. However, this requires a
dominator tree construction which is more complex. The time complexity can be
decreased to almost linear, though.
This patch just performs cycle cancelling iteratively. Add two members
`traversable` and `incoming` to GCOVArc. There are 3 states:
* `!traversable`: blocks not on this line or explored blocks
* `traversable && incoming == nullptr`: unexplored blocks
* `traversable && incoming != nullptr`: blocks which are being explored (on the stack)
If an arc points to a block being explored, a cycle has been found.
Let E be the number of arcs. Every time a cycle is found, at least one arc is
saturated (`edgeCount` reduced to 0), so there are at most E cycles. Finding one
cycle takes O(E) time, so the overall time complexity is O(E^2). Note that we
always augment through a back edge and never need to augment its reverse edge so
reverse edges in traditional flow networks are not needed.
Reviewed By: xinhaoyuan
Differential Revision: https://reviews.llvm.org/D93073
MD5 is used.
Currently during sample profile loading, NameTable has to be loaded entirely
up front before any name string is retrieved. That is because NameTable is
stored using ULEB128 encoding and cannot be directly accessed like an array.
However, if MD5 is used to represent name in the NameTable, it has fixed
length. If MD5 names are stored in uint64_t type instead of ULEB128, NameTable
can be accessed like an array then in many cases only part of the NameTable
has to be read. This is helpful for reducing compile time especially when
small source file is compiled. We find that after this change, the elapsed
time to build a large application distributively is reduced by 5% and the
accumulative cpu time used for building is also reduced by 5%. The size of
the profile is slightly reduced with this change by ~0.2%, and that also
indicates encoding MD5 in ULEB128 doesn't save the storage space.
Differential Revision: https://reviews.llvm.org/D92621
This stack of changes introduces `llvm-profgen` utility which generates a profile data file from given perf script data files for sample-based PGO. It’s part of(not only) the CSSPGO work. Specifically to support context-sensitive with/without pseudo probe profile, it implements a series of functionalities including perf trace parsing, instruction symbolization, LBR stack/call frame stack unwinding, pseudo probe decoding, etc. Also high throughput is achieved by multiple levels of sample aggregation and compatible format with one stop is generated at the end. Please refer to: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s for the CSSPGO RFC.
This change supports context-sensitive profile data generation into llvm-profgen. With simultaneous sampling for LBR and call stack, we can identify leaf of LBR sample with calling context from stack sample . During the process of deriving fall through path from LBR entries, we unwind LBR by replaying all the calls and returns (including implicit calls/returns due to inlining) backwards on top of the sampled call stack. Then the state of call stack as we unwind through LBR always represents the calling context of current fall through path.
we have two types of virtual unwinding 1) LBR unwinding and 2) linear range unwinding.
Specifically, for each LBR entry which can be classified into call, return, regular branch, LBR unwinding will replay the operation by pushing, popping or switching leaf frame towards the call stack and since the initial call stack is most recently sampled, the replay should be in anti-execution order, i.e. for the regular case, pop the call stack when LBR is call, push frame on call stack when LBR is return. After each LBR processed, it also needs to align with the next LBR by going through instructions from previous LBR's target to current LBR's source, which we named linear unwinding. As instruction from linear range can come from different function by inlining, linear unwinding will do the range splitting and record counters through the range with same inline context.
With each fall through path from LBR unwinding, we aggregate each sample into counters by the calling context and eventually generate full context sensitive profile (without relying on inlining) to driver compiler's PGO/FDO.
A breakdown of noteworthy changes:
- Added `HybridSample` class as the abstraction perf sample including LBR stack and call stack
* Extended `PerfReader` to implement auto-detect whether input perf script output contains CS profile, then do the parsing. Multiple `HybridSample` are extracted
* Speed up by aggregating `HybridSample` into `AggregatedSamples`
* Added VirtualUnwinder that consumes aggregated `HybridSample` and implements unwinding of calls, returns, and linear path that contains implicit call/return from inlining. Ranges and branches counters are aggregated by the calling context. Here calling context is string type, each context is a pair of function name and callsite location info, the whole context is like `main:1 @ foo:2 @ bar`.
* Added PorfileGenerater that accumulates counters by ranges unfolding or branch target mapping, then generates context-sensitive function profile including function body, inferring callee's head sample, callsite target samples, eventually records into ProfileMap.
* Leveraged LLVM build-in(`SampleProfWriter`) writer to support different serialization format with no stop
- `getCanonicalFnName` for callee name and name from ELF section
- Added regression test for both unwinding and profile generation
Test Plan:
ninja & ninja check-llvm
Reviewed By: hoy, wenlei, wmi
Differential Revision: https://reviews.llvm.org/D89723
This change adds the context-senstive sample PGO infracture described in CSSPGO RFC (https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s). It introduced an abstraction between input profile and profile loader that queries input profile for functions. Specifically, there's now the notion of base profile and context profile, and they are managed by the new SampleContextTracker for adjusting and merging profiles based on inline decisions. It works with top-down profiled guided inliner in profile loader (https://reviews.llvm.org/D70655) for better inlining with specialization and better post-inline profile fidelity. In the future, we can also expose this infrastructure to CGSCC inliner in order for it to take advantage of context-sensitive profile. This change is the consumption part of context-sensitive profile (The generation part is in this stack: https://reviews.llvm.org/D89707). We've seen good results internally in conjunction with Pseudo-probe (https://reviews.llvm.org/D86193). Pacthes for integration with Pseudo-probe coming up soon.
Currently the new infrastructure kick in when input profile contains the new context-sensitive profile; otherwise it's no-op and does not affect existing AutoFDO.
**Interface**
There're two sets of interfaces for query and tracking respectively exposed from SampleContextTracker. For query, now instead of simply getting a profile from input for a function, we can explicitly query base profile or context profile for given call path of a function. For tracking, there're separate APIs for marking context profile as inlined, or promoting and merging not inlined context profile.
- Query base profile (`getBaseSamplesFor`)
Base profile is the merged synthetic profile for function's CFG profile from any outstanding (not inlined) context. We can query base profile by function.
- Query context profile (`getContextSamplesFor`)
Context profile is a function's CFG profile for a given calling context. We can query context profile by context string.
- Track inlined context profile (`markContextSamplesInlined`)
When a function is inlined for given calling context, we need to mark the context profile for that context as inlined. This is to make sure we don't include inlined context profile when synthesizing base profile for that inlined function.
- Track not-inlined context profile (`promoteMergeContextSamplesTree`)
When a function is not inlined for given calling context, we need to promote the context profile tree so the not inlined context becomes top-level context. This preserve the sub-context under that function so later inline decision for that not inlined function will still have context profile for its call tree. Note that profile will be merged if needed when promoting a context profile tree if any of the node already exists at its promoted destination.
**Implementation**
Implementation-wise, `SampleContext` is created as abstraction for context. Currently it's a string for call path, and we can later optimize it to something more efficient, e.g. context id. Each `SampleContext` also has a `ContextState` indicating whether it's raw context profile from input, whether it's inlined or merged, whether it's synthetic profile created by compiler. Each `FunctionSamples` now has a `SampleContext` that tells whether it's base profile or context profile, and for context profile what is the context and state.
On top of the above context representation, a custom trie tree is implemented to track and manager context profiles. Specifically, `SampleContextTracker` is implemented that encapsulates a trie tree with `ContextTireNode` as node. Each node of the trie tree represents a frame in calling context, thus the path from root to a node represents a valid calling context. We also track `FunctionSamples` for each node, so this trie tree can serve efficient query for context profile. Accordingly, context profile tree promotion now becomes moving a subtree to be under the root of entire tree, and merge nodes for subtree if this move encounters existing nodes.
**Integration**
`SampleContextTracker` is now also integrated with AutoFDO, `SampleProfileReader` and `SampleProfileLoader`. When we detected input profile contains context-sensitive profile, `SampleContextTracker` will be used to track profiles, and all profile query will go to `SampleContextTracker` instead of `SampleProfileReader` automatically. Tracking APIs are called automatically for each inline decision from `SampleProfileLoader`.
Differential Revision: https://reviews.llvm.org/D90125
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
to their parent classes.
SampleProfileReaderExtBinary/SampleProfileWriterExtBinary specify the typical
section layout currently used by SampleFDO. Currently a lot of section
reader/writer stay in the two classes. However, as we expect to have more
types of SampleFDO profiles, we hope those new types of profiles can share
the common sections while configuring their own sections easily with minimal
change. That is why I move some common stuff from
SampleProfileReaderExtBinary/SampleProfileWriterExtBinary to
SampleProfileReaderExtBinaryBase/SampleProfileWriterExtBinaryBase so new
profiles class inheriting from the base class can reuse them.
Differential Revision: https://reviews.llvm.org/D89524
Format specifiers of incorrect length are replaced with format specifier
macros from `<cinttypes>` matching the typedefs used to declare the type
of the value being printed.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D89637
Following up D81682 and D83903, remove the code for the old value profiling
buckets, which have been replaced with the new, extended buckets and disabled by
default.
Also syncing InstrProfData.inc between compiler-rt and llvm.
Differential Revision: https://reviews.llvm.org/D88838
llvm-cov reports a poor error message when the -arch specifier is
missing or invalid, and a binary has multiple slices. Make the error
message more specific.
(This version of the patch avoids using llvm::none_of -- the way I used
the utility caused compile errors on many bots, possibly because the
wrong overload of `none_of` was selected.)
rdar://40312677
llvm-cov reports a poor error message when the -arch specifier is
missing or invalid, and a binary has multiple slices. Make the error
message more specific.
rdar://40312677
The current organization of FileInfo and its referenced utility functions of
(GCOVFile, GCOVFunction, GCOVBlock) is messy. Some members of FileInfo are just
copied from GCOVFile. FileInfo::print (.gcov output and --intermediate output)
is interleaved with branch statistics and computation of line execution counts.
--intermediate has to do redundant .gcov output to gather branch statistics.
This patch deletes lots of code and introduces a clearer work flow:
```
fn collectFunction
for each block b
for each line lineNum
let line be LineInfo of the file on lineNum
line.exists = 1
increment function's lines & linesExec if necessary
increment line.count
line.blocks.push_back(&b)
fn collectSourceLine
compute cycle counts
count = incoming_counts + cycle_counts
if line.exists
++summary->lines
if line.count
++summary->linesExec
fn collectSource
for each line
call collectSourceLine
fn main
for each function
call collectFunction
print function summary
for each source file
call collectSource
print file summary
annotate the source file with line execution counts
if -i
print intermediate file
```
The output order of functions and files now follows the original order in
.gcno files.
For a CFG G=(V,E), Knuth describes that by Kirchoff's circuit law, the minimum
number of counters necessary is |E|-(|V|-1). The emitted edges form a spanning
tree. libgcov emitted .gcda files leverages this optimization while clang
--coverage's doesn't.
Propagate counts by Kirchhoff's circuit law so that llvm-cov gcov can
correctly print line counts of gcc --coverage emitted files and enable
the future improvement of clang --coverage.
and indirect call promotion candidate.
Profile remapping is a feature to match a function in the module with its
profile in sample profile if the function name and the name in profile look
different but are equivalent using given remapping rules. This is a useful
feature to keep the performance stable by specifying some remapping rules
when sampleFDO targets are going through some large scale function signature
change.
However, currently profile remapping support is only valid for outline
function profile in SampleFDO. It cannot match a callee with an inline
instance profile if they have different but equivalent names. We found
that without the support for inline instance profile, remapping is less
effective for some large scale change.
To add that support, before any remapping lookup happens, all the names
in the profile will be inserted into remapper and the Key to the name
mapping will be recorded in a map called NameMap in the remapper. During
name lookup, a Key will be returned for the given name and it will be used
to extract an equivalent name in the profile from NameMap. So with the help
of the NameMap, we can translate any given name to an equivalent name in
the profile if it exists. Whenever we try to match a name in the module to
a name in the profile, we will try the match with the original name first,
and if it doesn't match, we will use the equivalent name got from remapper
to try the match for another time. In this way, the patch can enhance the
profile remapping support for searching inline instance and searching
indirect call promotion candidate.
In a planned large scale change of int64 type (long long) to int64_t (long),
we found the performance of a google internal benchmark degraded by 2% if
nothing was done. If existing profile remapping was enabled, the performance
degradation dropped to 1.2%. If the profile remapping with the current patch
was enabled, the performance degradation further dropped to 0.14% (Note the
experiment was done before searching indirect call promotion candidate was
added. We hope with the remapping support of searching indirect call promotion
candidate, the degradation can drop to 0% in the end. It will be evaluated
post commit).
Differential Revision: https://reviews.llvm.org/D86332
Extend the memop value profile buckets to be more flexible (could accommodate a
mix of individual values and ranges) and to cover more value ranges (from 11 to
22 buckets).
Disabled behind a flag (to be enabled separately) and the existing code to be
removed later.
Differential Revision: https://reviews.llvm.org/D81682
PGO profile is usually more precise than sample profile. However, PGO profile
needs to be collected from loadtest and loadtest may not be representative
enough to the production workload. Sample profile collected from production
can be used as a supplement -- for functions cold in loadtest but warm/hot
in production, we can scale up the related function in PGO profile if the
function is warm or hot in sample profile.
The implementation contains changes in compiler side and llvm-profdata side.
Given an instr profile and a sample profile, for a function cold in PGO
profile but warm/hot in sample profile, llvm-profdata will either mark
all the counters in the profile to be -1 or scale up the max count in the
function to be above hot threshold, depending on the zero counter ratio in
the profile. The assumption is if there are too many counters being zero
in the function profile, the profile is more likely to cause harm than good,
then llvm-profdata will mark all the counters to be -1 indicating the
function is hot but the profile is unaccountable. In compiler side, if a
function profile with all -1 counters is seen, the function entry count will
be set to be above hot threshold but its internal profile will be dropped.
In the long run, it may be useful to let compiler support using PGO profile
and sample profile at the same time, but that requires more careful design
and more substantial changes to make two profiles work seamlessly. The patch
here serves as a simple intermediate solution.
Differential Revision: https://reviews.llvm.org/D81981
This reverts commit 4a539faf74.
There is a __llvm_profile_instrument_range related crash in PGO-instrumented clang:
```
(gdb) bt
llvm::ConstantRange const&, llvm::APInt const&, unsigned int, bool) ()
llvm::ScalarEvolution::getRangeForAffineAR(llvm::SCEV const*, llvm::SCEV
const*, llvm::SCEV const*, unsigned int) ()
```
(The body of __llvm_profile_instrument_range is inlined, so we can only find__llvm_profile_instrument_target in the trace)
```
23│ 0x000055555dba0961 <+65>: nopw %cs:0x0(%rax,%rax,1)
24│ 0x000055555dba096b <+75>: nopl 0x0(%rax,%rax,1)
25│ 0x000055555dba0970 <+80>: mov %rsi,%rbx
26│ 0x000055555dba0973 <+83>: mov 0x8(%rsi),%rsi # %rsi=-1 -> SIGSEGV
27│ 0x000055555dba0977 <+87>: cmp %r15,(%rbx)
28│ 0x000055555dba097a <+90>: je 0x55555dba0a76 <__llvm_profile_instrument_target+342>
```
This patch includes the supporting code that enables always
instrumenting the function entry block by default.
This patch will NOT the default behavior.
It adds a variant bit in the profile version, adds new directives in
text profile format, and changes llvm-profdata tool accordingly.
This patch is a split of D83024 (https://reviews.llvm.org/D83024)
Many test changes from D83024 are also included.
Differential Revision: https://reviews.llvm.org/D84261
.gcno, .gcda and source files can be modified while we are reading them. If the
concurrent modification of a file being read nullifies the NUL terminator
assumption, llvm-cov can trip over an assertion failure in MemoryBuffer::init.
This is not so rare - the source files can be in an editor and .gcda can be
written by an running process (if the process forks, when .gcda gets written is
probably more unpredictable).
There is no accompanying test because an assertion failure requires data
races with some involved setting.
Extend the memop value profile buckets to be more flexible (could accommodate a
mix of individual values and ranges) and to cover more value ranges (from 11 to
22 buckets).
Disabled behind a flag (to be enabled separately) and the existing code to be
removed later.
Change file static function getEntryForPercentile to be a static member function
in ProfileSummaryBuilder so it can be used by other files.
Differential Revision: https://reviews.llvm.org/D83439
Extend the memop value profile buckets to be more flexible (could accommodate a
mix of individual values and ranges) and to cover more value ranges (from 11 to
22 buckets).
Disabled behind a flag (to be enabled separately) and the existing code to be
removed later.
Differential Revision: https://reviews.llvm.org/D81682
If .gcda is corrupted, gcov continues to produce a .gcov and just
assumes execution counts are zeros. This is reasonable, because the
program can corrupt its .gcda output. The code path should be similar to
the code path without .gcda.
Between gcov 4.9~8, `gcov -i $file` prints coverage information to
$file.gcov in an intermediate text format (single file, instead of
$source.gcov for each source file).
lcov newer than 2019-05-24 detects -i support and uses it to increase
processing speed. gcov 9 (GCC r265587) removed --intermediate-format
and -i was changed to mean --json-format. However, we consider this
format still useful and support it. geninfo (part of lcov) supports this
format even if we announce that we are compatible with gcov 9.0.0
global-ctor.ll no longer checks what it intended to check
(@_GLOBAL__sub_I_global-ctor.ll needs a !dbg to work).
Rewrite it.
gcov 3.4 and gcov 4.2 use the same format, thus we can lower the version
requirement to 3.4
llvm-cov.test and many Inputs/test* files contain wrong tests.
This patch rewrites a large portion of these files.
The pre-canned .gcno & .gcda are replaced by binaries produced by
clang --coverage (compatible with gcov 4.8~7)
(after some GCDAProfiling.c bugs were fixed by my previous commits).
Also make llvm-cov gcov on a little-endian host capable to parse big-endian .gcno and .gcda,
and make llvm-cov gcov on big-endian host capable to parse little-endian .gcno and .gcda
gcov 9 (r264462) started to use GCOV_TAG_OBJECT_SUMMARY. Before,
GCOV_TAG_PROGRAM_SUMMARY was used.
libclang_rt.profile should emit just one tag according to the version.
Another bug introduced by rL194499 is that the wrong runcount field was
selected.
Fix the two bugs so that gcov can correctly decode "Runs:" from
libclang_rt.profile produced .gcda files, and llvm-cov gcov can
correctly decode "Runs:" from libgcov produced .gcda files.
gcov by default prints to a .gcov file. With --stdout, stdout is used.
Some summary information is omitted. There is no separator for multiple
source files.
GCDAProfiling.c unnecessarily writes function names to .gcda files.
GCC 4.2 gcc/libgcov.c (now renamed to libgcc/libgcov*) did not write function
names. gcov-7 (compatible) crashes on .gcda produced by libclang_rt.profile
rL176173 realized the problem and introduced a mode to remove function
names.
llvm-cov code apparently takes GCDAProfiling.c output format as truth
and tries to decode function names. Additionally, llvm-cov tries to
decode tags in certain order which does not match libgcov emitted .gcda
files.
This patch fixes the .gcda decoder and makes it work with GCC 8 and 9
(10 is compatible with 9). Note, line statistics are broken and not
fixed by this patch.
Add test/tools/llvm-cov/gcov-{4.7,8,9}.c to test compatibility.
Fix the error of show-prof-info.test on some platforms without zlib.
The common profile usage is to collect profile from a target and then use the profile to guide the optimized build for the same target. There are some cases that no profile can be collected for a target. In those cases, although no full profile is available, it is possible to have some partial profile collected from other targets to optimize common libraries and utilities. A flag is needed to tell the partial profile from the full profile apart, so compiler can use different strategy for them.
Differential Revision: https://reviews.llvm.org/D77426
The common profile usage is to collect profile from a target and then use the profile to guide the optimized build for the same target. There are some cases that no profile can be collected for a target. In those cases, although no full profile is available, it is possible to have some partial profile collected from other targets to optimize common libraries and utilities. A flag is needed to tell the partial profile from the full profile apart, so compiler can use different strategy for them.
Differential Revision: https://reviews.llvm.org/D77426
Compbinary format uses MD5 to represent strings in name table. That gives smaller profile without the need of compression/decompression when writing/reading the profile. The patch adds the support in extbinary format. It is off by default but user can choose to enable it.
Note the feature of using MD5 in name table can bring very small chance of name conflict leading to profile mismatch. Besides, profile using the feature won't have the profile remapping support.
Differential Revision: https://reviews.llvm.org/D76255
After the format change from D69471, there can be more than one section
in an object that contains coverage function records. Look up each of
these sections and concatenate all the records together.
This re-enables the instrprof-merging.cpp test, which previously was
failing on OSes which use comdats.
Thanks to Jeremy Morse, who very kindly provided object files from the
bot I broke to help me debug.
Try again with an up-to-date version of D69471 (99317124 was a stale
revision).
---
Revise the coverage mapping format to reduce binary size by:
1. Naming function records and marking them `linkonce_odr`, and
2. Compressing filenames.
This shrinks the size of llc's coverage segment by 82% (334MB -> 62MB)
and speeds up end-to-end single-threaded report generation by 10%. For
reference the compressed name data in llc is 81MB (__llvm_prf_names).
Rationale for changes to the format:
- With the current format, most coverage function records are discarded.
E.g., more than 97% of the records in llc are *duplicate* placeholders
for functions visible-but-not-used in TUs. Placeholders *are* used to
show under-covered functions, but duplicate placeholders waste space.
- We reached general consensus about giving (1) a try at the 2017 code
coverage BoF [1]. The thinking was that using `linkonce_odr` to merge
duplicates is simpler than alternatives like teaching build systems
about a coverage-aware database/module/etc on the side.
- Revising the format is expensive due to the backwards compatibility
requirement, so we might as well compress filenames while we're at it.
This shrinks the encoded filenames in llc by 86% (12MB -> 1.6MB).
See CoverageMappingFormat.rst for the details on what exactly has
changed.
Fixes PR34533 [2], hopefully.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118428.html
[2] https://bugs.llvm.org/show_bug.cgi?id=34533
Differential Revision: https://reviews.llvm.org/D69471
Revise the coverage mapping format to reduce binary size by:
1. Naming function records and marking them `linkonce_odr`, and
2. Compressing filenames.
This shrinks the size of llc's coverage segment by 82% (334MB -> 62MB)
and speeds up end-to-end single-threaded report generation by 10%. For
reference the compressed name data in llc is 81MB (__llvm_prf_names).
Rationale for changes to the format:
- With the current format, most coverage function records are discarded.
E.g., more than 97% of the records in llc are *duplicate* placeholders
for functions visible-but-not-used in TUs. Placeholders *are* used to
show under-covered functions, but duplicate placeholders waste space.
- We reached general consensus about giving (1) a try at the 2017 code
coverage BoF [1]. The thinking was that using `linkonce_odr` to merge
duplicates is simpler than alternatives like teaching build systems
about a coverage-aware database/module/etc on the side.
- Revising the format is expensive due to the backwards compatibility
requirement, so we might as well compress filenames while we're at it.
This shrinks the encoded filenames in llc by 86% (12MB -> 1.6MB).
See CoverageMappingFormat.rst for the details on what exactly has
changed.
Fixes PR34533 [2], hopefully.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118428.html
[2] https://bugs.llvm.org/show_bug.cgi?id=34533
Differential Revision: https://reviews.llvm.org/D69471
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Revise the coverage mapping format to reduce binary size by:
1. Naming function records and marking them `linkonce_odr`, and
2. Compressing filenames.
This shrinks the size of llc's coverage segment by 82% (334MB -> 62MB)
and speeds up end-to-end single-threaded report generation by 10%. For
reference the compressed name data in llc is 81MB (__llvm_prf_names).
Rationale for changes to the format:
- With the current format, most coverage function records are discarded.
E.g., more than 97% of the records in llc are *duplicate* placeholders
for functions visible-but-not-used in TUs. Placeholders *are* used to
show under-covered functions, but duplicate placeholders waste space.
- We reached general consensus about giving (1) a try at the 2017 code
coverage BoF [1]. The thinking was that using `linkonce_odr` to merge
duplicates is simpler than alternatives like teaching build systems
about a coverage-aware database/module/etc on the side.
- Revising the format is expensive due to the backwards compatibility
requirement, so we might as well compress filenames while we're at it.
This shrinks the encoded filenames in llc by 86% (12MB -> 1.6MB).
See CoverageMappingFormat.rst for the details on what exactly has
changed.
Fixes PR34533 [2], hopefully.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118428.html
[2] https://bugs.llvm.org/show_bug.cgi?id=34533
Differential Revision: https://reviews.llvm.org/D69471
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
Add support for continuously syncing profile counter updates to a file.
The motivation for this is that programs do not always exit cleanly. On
iOS, for example, programs are usually killed via a signal from the OS.
Running atexit() handlers after catching a signal is unreliable, so some
method for progressively writing out profile data is necessary.
The approach taken here is to mmap() the `__llvm_prf_cnts` section onto
a raw profile. To do this, the linker must page-align the counter and
data sections, and the runtime must ensure that counters are mapped to a
page-aligned offset within a raw profile.
Continuous mode is (for the moment) incompatible with the online merging
mode. This limitation is lifted in https://reviews.llvm.org/D69586.
Continuous mode is also (for the moment) incompatible with value
profiling, as I'm not sure whether there is interest in this and the
implementation may be tricky.
As I have not been able to test extensively on non-Darwin platforms,
only Darwin support is included for the moment. However, continuous mode
may "just work" without modification on Linux and some UNIX-likes. AIUI
the default value for the GNU linker's `--section-alignment` flag is set
to the page size on many systems. This appears to be true for LLD as
well, as its `no_nmagic` option is on by default. Continuous mode will
not "just work" on Fuchsia or Windows, as it's not possible to mmap() a
section on these platforms. There is a proposal to add a layer of
indirection to the profile instrumentation to support these platforms.
rdar://54210980
Differential Revision: https://reviews.llvm.org/D68351
by ExtBinary format profile
Profile on-demand loading was added for ExtBinary format profile in rL374233,
but currently profile on-demand loading doesn't work well with profile
remapping. The patch adds the support.
Suppose a function in the current module has outline instance in the profile.
The function name in the module is different from the name of the outline
instance, but remapper knows the two names are equal. When loading profile
on-demand, the outline instance has to be loaded with remapper's help.
At the same time SampleProfileReaderItaniumRemapper is changed from a proxy
of SampleProfileReader to a helper member in SampleProfileReader.
Differential Revision: https://reviews.llvm.org/D68901
llvm-svn: 375295
in ExtBinary format
Currently for Text, Binary and ExtBinary format profiles, when we compile a
module with samplefdo, even if there is no function showing up in the profile,
we have to load all the function profiles from the profile input. That is a
waste of compile time.
CompactBinary format profile has already had the support of loading function
profiles on demand. In this patch, we add the support to load profile on
demand for ExtBinary format. It will work no matter the sections in ExtBinary
format profile are compressed or not. Experiment shows it reduces the time to
compile a server benchmark by 30%.
When profile remapping and loading function profiles on demand are both used,
extra work needs to be done so that the loading on demand process will take
the name remapping into consideration. It will be addressed in a follow-up
patch.
Differential Revision: https://reviews.llvm.org/D68601
llvm-svn: 374233
Previously ExtBinary profile format only supports compression using zlib for
profile symbol list. In this patch, we extend the compression support to any
section. User can select some or all of the sections to compress. In an
experiment, for a 45M profile in ExtBinary format, compressing name table
reduced its size to 24M, and compressing all the sections reduced its size
to 11M.
Differential Revision: https://reviews.llvm.org/D68253
llvm-svn: 373914
The static analyzer is warning about a potential null dereference, as we're already earlying-out for a null Constant pointer I've just folded this into a dyn_cast_or_null<ConstantInt>.
No test case, this is by inspection only.
llvm-svn: 373322
or the size of the profile for profile in ExtBinary format.
Fix a test failure on Mac.
[SampleFDO] Expose an interface to return the size of a section or the
size of the profile for profile in ExtBinary format.
Sometimes we want to limit the size of the profile by stripping some functions
with low sample count or by stripping some function names with small text size
from profile symbol list. That requires the profile reader to have the
interfaces returning the size of a section or the size of total profile. The
patch add those interfaces.
At the same time, add some dump facility to show the size of each section.
Differential revision: https://reviews.llvm.org/D67726
llvm-svn: 372478
of the profile for profile in ExtBinary format.
Sometimes we want to limit the size of the profile by stripping some functions
with low sample count or by stripping some function names with small text size
from profile symbol list. That requires the profile reader to have the
interfaces returning the size of a section or the size of total profile. The
patch add those interfaces.
At the same time, add some dump facility to show the size of each section.
llvm-svn: 372439
Make the method MachOUniversalBinary::getObjectForArch return MachOUniversalBinary::ObjectForArch
and add helper methods MachOUniversalBinary::getMachOObjectForArch, MachOUniversalBinary::getArchiveForArch
for those who explicitly expect to get a MachOObjectFile or an Archive.
Differential revision: https://reviews.llvm.org/D67700
Test plan: make check-all
llvm-svn: 372278
Summary:
The PGO counter reading will add cold and inlinehint (hot) attributes
to functions that are very cold or hot. This was using hardcoded
thresholds, instead of the profile summary cutoffs which are used in
other hot/cold detection and are more dynamic and adaptable. Switch
to using the summary-based cold/hot detection.
The hardcoded limits were causing some code that had a medium level of
hotness (per the summary) to be incorrectly marked with a cold
attribute, blocking inlining.
Reviewers: davidxl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67673
llvm-svn: 372189
Speed up queries for coverage info in a file by reducing the amount of
time spent determining whether a function record corresponds to a file.
This gives a 36% speedup when generating a coverage report for `llc`.
The reduction is entirely in user time.
rdar://54758110
Differential Revision: https://reviews.llvm.org/D67575
llvm-svn: 372025
Wei Mi