During a backtrace the `.cfi_undefined` for a float register causes an assert in libunwind.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D110144
This way, we do not need to set LLVM_CMAKE_PATH to LLVM_CMAKE_DIR when (NOT LLVM_CONFIG_FOUND)
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D107717
-Wunused-but-set-variable triggers a warning even the block of code is effectively dead.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D107835
Control-flow Enforcement Technology (CET), published by Intel,
introduces shadow stack feature aiming to ensure a return from
a function is directed to where the function was called.
In a CET enabled system, each function call will push return
address into normal stack and shadow stack, when the function
returns, the address stored in shadow stack will be popped and
compared with the return address, program will fail if the 2
addresses don't match.
In exception handling, the control flow may skip some stack frames
and we must adjust shadow stack to avoid violating CET restriction.
In order to achieve this, we count the number of stack frames skipped
and adjust shadow stack by this number before jumping to landing pad.
Reviewed By: hjl.tools, compnerd, MaskRay
Differential Revision: https://reviews.llvm.org/D105968
Signed-off-by: gejin <ge.jin@intel.com>
The original libunwind project defines UNW_AARCH64_* instead of UNW_ARM64_*.
Rename the enum members to match. This allows some applications with simple
`unw_init_local` usage to migrate to llvm-project libunwind.
Note: the canonical names of `UNW_ARM_D{0..31}` are now `UNW_AARCH64_V{0..31}`,
to match the original libunwind.
UNW_ARM64_* are kept for now for compatibility. Some may be unneeded and can be
cleaned up in the future.
Reviewed By: #libunwind, compnerd
Differential Revision: https://reviews.llvm.org/D107996
In some binaries, built with clang/lld, libunwind crashes
with "unsupported x86_64 register" for regNum == 16:
Differential Revision: https://reviews.llvm.org/D107919
-Wunused-but-set-variable triggers a warning even the block of code is effectively dead.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D107835
_Unwind_ForcedUnwind is not mandated by the EHABI but for compatibilty
reasons adding so the interface to higher layers would be the same.
Dropping EHABI specific _Unwind_Stop_Fn definition since it is not defined by EHABI.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D89570
Moving Itanium and ArmEHABI specific implementations to dedicated files.
This is a NFC patch.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D106461
Currently, OR1K architecture put the program counter at offset 0x128 of
the current `or1k_thread_state_t`. However, the PC is restored after
updating the thread pointer in `r3`, which causes the PC to be fetched
incorrectly.
This patch swaps the order of restoration of `r9` and `r3`, such that
the PC is restored to `r9` using the current thread state.
Patch by Oi Chee Cheung!
Reviewed By: whitequark, compnerd
Differential Revision: https://reviews.llvm.org/D107042
Building the libraries with -fPIC ensures that we can link an executable
against the static libraries with -fPIE. Furthermore, there is apparently
basically no downside to building the libraries with position independent
code, since modern toolchains are sufficiently clever.
This commit enforces that we always build the runtime libraries with -fPIC.
This is another take on D104327, which instead makes the decision of whether
to build with -fPIC or not to the build script that drives the runtimes'
build.
Fixes http://llvm.org/PR43604.
Differential Revision: https://reviews.llvm.org/D104328
This is a NFC commit to normalize how we set target properties on the
various runtime targets. A follow-up patch is going to add new properties,
and I wanted that follow-up patch to be cleaner.
This commit modifies stepWithDwarf allowing for CFI directives to
specify the value of the stack pointer.
Previously, the SP would be unconditionally set to the CFA, because it
(wrongly) stated that the CFA is the stack pointer at the call site of a
function, but that is not always true.
One situation in which that is false, is for example if you have
switched stacks. In that case if you set the CFA to the SP before
switching the stack, the CFA would be far away from where the current
call frame is located.
The CFA always points to the current call frame, and that call frame
could have a CFI directive that specifies how to restore the stack
pointer. If not, it is OK to fallback and set the SP = CFA.
This change sets SP = CFA before restoring the registers during
unwinding, allowing the stack frame to be restored with a value
different than the CFA.
Reviewed By: #libunwind, phosek
Differential Revision: https://reviews.llvm.org/D106626
Instead of using TARGET_TRIPLE, which is always set to LLVM_DEFAULT_TARGET_TRIPLE,
use that variable directly to populate the various XXXX_TARGET_TRIPLE
variables in the runtimes.
This re-applies 77396bbc98 and 5099e01568, which were reverted in
850b57c5fb because they broke the build.
Differential Revision: https://reviews.llvm.org/D106009
When a target triple is specified in CMake via XXX_TARGET_TRIPLE, we tried
passing the --target=<...> flag to the compiler. However, not all compilers
support that flag (e.g. GCC, which is not a cross-compiler). As a result,
setting e.g. LIBCXX_TARGET_TRIPLE=<host-triple> would end up trying to
pass --target=<host-triple> to GCC, which breaks everything because the
flag isn't even supported.
This commit only adds `--target=<...>` & friends to the flags if it is
supported by the compiler.
One could argue that it's confusing to pass LIBCXX_TARGET_TRIPLE=<...>
and have it be ignored. That's correct, and one possibility would be
to assert that the requested triple is the same as the host triple when
we know the compiler is unable to cross-compile. However, note that this
is a pre-existing issue (setting the TARGET_TRIPLE variable never had an
influence on the flags passed to the compiler), and also fixing that is
starting to look like reimplementing a lot of CMake logic that is already
handled with CMAKE_CXX_COMPILER_TARGET.
Differential Revision: https://reviews.llvm.org/D106082
add_lit_testsuite() takes Lit parameters passed to it and adds them
to the parameters used globally when running all test suites. That
means that a target like `check-all`, which ends up calling Lit on
the whole monorepo, will see the test parameters for all the individual
project's test suites.
So, for example, it would see `--param std=c++03` (from libc++abi), and
`--param std=c++03` (from libc++), and `--param whatever` (from another
project being tested at the same time). While always unclean, that works
when the parameters all agree. However, if the parameters share the same
name but have different values, only one of those two values will be used
and it will be incredibly confusing to understand why one of the test
suites is being run with the incorrect parameter value.
For that reason, this commit moves away from using add_lit_testsuite()'s
PARAM functionality, and serializes the parameter values for the runtimes
in the generated config.py file instead, which is local to the specific
test suite.
Differential Revision: https://reviews.llvm.org/D105991
This commit reverts 5099e01568 and 77396bbc98, which broke the build
in various ways. I'm reverting until I can investigate, since that
change appears to be way more subtle than it seemed.
This is a second attempt at D101497, which landed as
9a9bc76c0e but had to be reverted in
8cf7ddbdd4.
This issue was that in the case that `COMPILER_RT_INSTALL_PATH` is
empty, expressions like "${COMPILER_RT_INSTALL_PATH}/bin" evaluated to
"/bin" not "bin" as intended and as was originally.
One solution is to make `COMPILER_RT_INSTALL_PATH` always non-empty,
defaulting it to `CMAKE_INSTALL_PREFIX`. D99636 adopted that approach.
But, I think it is more ergonomic to allow those project-specific paths
to be relative the global ones. Also, making install paths absolute by
default inhibits the proper behavior of functions like
`GNUInstallDirs_get_absolute_install_dir` which make relative install
paths absolute in a more complicated way.
Given all this, I will define a function like the one asked for in
https://gitlab.kitware.com/cmake/cmake/-/issues/19568 (and needed for a
similar use-case).
---
Original message:
Instead of using `COMPILER_RT_INSTALL_PATH` through the CMake for
complier-rt, just use it to define variables for the subdirs which
themselves are used.
This preserves compatibility, but later on we might consider getting rid
of `COMPILER_RT_INSTALL_PATH` and just changing the defaults for the
subdir variables directly.
---
There was a seaming bug where the (non-Apple) per-target libdir was
`${target}` not `lib/${target}`. I suspect that has to do with the docs
on `COMPILER_RT_INSTALL_PATH` saying was the library dir when that's no
longer true, so I just went ahead and fixed it, allowing me to define
fewer and more sensible variables.
That last part should be the only behavior changes; everything else
should be a pure refactoring.
---
I added some documentation of these variables too. In particular, I
wanted to highlight the gotcha where `-DSomeCachePath=...` without the
`:PATH` will lead CMake to make the path absolute. See [1] for
discussion of the problem, and [2] for the brief official documentation
they added as a result.
[1]: https://cmake.org/pipermail/cmake/2015-March/060204.html
[2]: https://cmake.org/cmake/help/latest/manual/cmake.1.html#options
In 38b2dec37e the problem was somewhat
misidentified and so `:STRING` was used, but `:PATH` is better as it
sets the correct type from the get-go.
---
D99484 is the main thrust of the `GnuInstallDirs` work. Once this lands,
it should be feasible to follow both of these up with a simple patch for
compiler-rt analogous to the one for libcxx.
Reviewed By: phosek, #libc_abi, #libunwind
Differential Revision: https://reviews.llvm.org/D105765
This is necessary for from-scratch configurations to support the 32-bit
mode of the test suite.
Differential Revision: https://reviews.llvm.org/D105435
"bad second level page" and "second level compressed unwind table"
can now be grepped for.
(Also remove one of the two spaces between "second" and "level"
in the second message.)
Now that Lit supports regular expressions inside XFAIL & friends, it is
much easier to write Lit annotations based on the triple.
Differential Revision: https://reviews.llvm.org/D104747
Before this patch, Lit parameters that were set as a result of CMake
options were not made available to from-scratch configs. This patch
serializes those parameters into the generated lit config file so that
they are available to all configs.
Differential Revision: https://reviews.llvm.org/D105047
Fix for the following exception.
AttributeError: 'TestingConfig' object has no attribute 'target_triple'
Related revision: https://reviews.llvm.org/D102012
'TestingConfig' object has no attribute 'target_triple'
Reviewed By: #libunwind, miyuki, danielkiss, mstorsjo
Differential Revision: https://reviews.llvm.org/D103140
This was regressed in adf1561d6c. Since gcc does not support
`__has_feature`, this adjusts the build to use the
`__SANITIZE_ADDRESS__` macro which GCC defines to identify if ASAN is
enabled (similar to `__has_feature`). This allows building libunwind
with gcc again.
Patch by Daniel Levin!
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D104176
This matches the fact that we build the experimental library by default.
Otherwise, by default we'd be building the library but not testing it,
which is inconsistent.
Differential Revision: https://reviews.llvm.org/D102109
If you're building libunwind instrumented with ASan, `_Unwind_RaiseException`
will poison the stack and then transfer control in a manner which isn't
understood by ASan, so the stack will remain poisoned. This can cause
false positives, e.g. if you call an uninstrumented function (so it
doesn't re-poison the stack) after catching an exception. Add a call to
`__asan_handle_no_return` inside `__unw_resume` to get ASan to unpoison
the stack and avoid this.
`__unw_resume` seems like the appropriate place to make this call, since
it's used for resumption by all unwind implementations except SJLJ. SJLJ
uses `__builtin_longjmp` to handle resumption, which is already
recognized as noreturn (and therefore ASan adds the `__asan_handle_no_return`
call itself), so it doesn't need any special handling.
PR32434 is somewhat similar (in particular needing a component built
without ASan to trigger the bug), and rG781ef03e1012, the fix for that
bug, adds an interceptor for `_Unwind_RaiseException`. This interceptor
won't always be triggered though, e.g. if you statically link the
unwinder into libc++abi in a way that prevents interposing the unwinder
functions (e.g. marking the symbols as hidden, using `--exclude-libs`,
or using `-Bsymbolic`). rG53335d6d86d5 makes `__cxa_throw` call
`__asan_handle_no_return` explicitly, to similarly avoid relying on
interception.
Reviewed By: #libunwind, compnerd
Differential Revision: https://reviews.llvm.org/D103002
This fixes a long standing issue where the triple is not always set
consistently in all configurations. This change also moves the
back-deployment Lit features to using the proper target triple
instead of using something ad-hoc.
This will be necessary for using from scratch Lit configuration files
in both normal testing and back-deployment testing.
Differential Revision: https://reviews.llvm.org/D102012
Summary:
This NFC patch replaces the representation of registers and the left shift operator in the PowerPC assembly code to allow it to be consumed by the GNU flavored assembler and the AIX assembler.
* Registers - change the representation of PowperPC registers from %rn, %fn, %vsn, and %vrn to the register number alone, e.g., n. The GNU flavored assembler and the AIX assembler are able to determine the register kind based on the context of the instruction in which the register is used.
* Left shift operator - use macro PPC_LEFT_SHIFT to represent the left shift operator. The left shift operator in the AIX assembly language is < instead of <<
Reviewed by: sfertile, MaskRay, compnerd
Differential Revision: https://reviews.llvm.org/D101179
The new layout more closely matches the layout used by other compilers.
This is only used when LLVM_ENABLE_PER_TARGET_RUNTIME_DIR is enabled.
Differential Revision: https://reviews.llvm.org/D100869
These variables were introduced during early work on the runtimes build
but were obsoleted by {LIBCXX,LIBCXXABI,LIBUNWIND}_INSTALL_LIBRARY_DIR.
Differential Revision: https://reviews.llvm.org/D99697
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
Differential Revision: https://reviews.llvm.org/D97572
immediate build failure when Cross Unwinding enabled.
Follow up patch will cleanup some Macros handling.
Differential Revision: https://reviews.llvm.org/D97762
Before this patch, we could only link against the back-deployment libc++abi
dylib. This patch allows linking against the just-built libc++abi, but
running against the back-deployment one -- just like we do for libc++.
Also, add XFAIL markup to flag expected errors.
Differential Revision: https://reviews.llvm.org/D91069
Rename the CMake option, LIBUNWIND_HERMETIC_STATIC_LIBRARY, to
LIBUNWIND_HIDE_SYMBOLS. Rename the C macro define,
_LIBUNWIND_DISABLE_VISIBILITY_ANNOTATIONS, to _LIBUNWIND_HIDE_SYMBOLS,
because now the macro adds a .hidden directive rather than merely
suppress visibility annotations.
For ELF, when LIBUNWIND_HIDE_SYMBOLS is enabled, mark unw_getcontext as
hidden. This symbol is the only one defined using src/assembly.h's
WEAK_ALIAS macro. Other unw_* weak aliases are defined in C++ and are
already hidden.
Mach-O doesn't support weak aliases, so remove .weak_reference and
weak_import. When LIBUNWIND_HIDE_SYMBOLS is enabled, output
.private_extern for the unw_* aliases.
In assembly.h, add missing SYMBOL_NAME macro invocations, which are
used to prefix symbol names with '_' on some targets.
Fixes PR46709.
Reviewed By: #libunwind, phosek, compnerd, steven_wu
Differential Revision: https://reviews.llvm.org/D93003
This change adds support for the dwarf PC register column in arm64, allowing
CFI directives to make use of it.
As of the last revision of the DWARF for ARM 64-bit architecture[0], the pc
register has been added as a valir register, with number 32.
This allows libunwinder to restore both pc and lr, which is useful
for stack switches and signal contexts.
[0]:
f52e1ad3f8/aadwarf64/aadwarf64.rst
Reviewed By: phosek, #libunwind
Differential Revision: https://reviews.llvm.org/D96901
Null return addresses can appear at the bottom of the stack (i.e. the
frame corresponding to the entry point). Authenticating these addresses
will set the error code in the address, which will lead to a segfault
in the sigreturn trampoline detection code. Fix this problem by not
authenticating null addresses.
Differential Revision: https://reviews.llvm.org/D96560
Let's use -nostdlib++ rather than -nodefaultlibs when building libc++/libc++abi/libunwind libraries. The default is -nostdlib++ if supported by a build compiler like it is the case with clang, otherwise -nodefaultlibs is used as before.
This change is needed to avoid additional changes at the link step and not to increase the maintenance costs. If clang with -nodefaultlibs is used all the libraries which are removed but required would have to be manually added in. This set of libraries are unique and will send out.
The propose change will allow to make the link step simple for other platforms as well.
Reviewed By: #libc, #libc_abi, ldionne
Differential Revision: https://reviews.llvm.org/D95875
An error has occurred when I build libunwind with -DLLVM_BUILD_DOCS=ON.
Reviewed By: #libunwind, compnerd
Differential Revision: https://reviews.llvm.org/D96107
Daniel Kiss