Added intrinsics for the instructions. CC parameter of the intrinsics was changed from i8 to i32 according to the spec.
By Igor Breger (igor.breger@intel.com)
llvm-svn: 236714
This associates movss and movsd with the packed single and packed double
execution domains (resp.). While this is largely cosmetic, as we now
don't have weird ping-pong-ing between single and double precision, it
is also useful because it avoids the domain fixing algorithm from seeing
domain breaks that don't actually exist. It will also be much more
important if we have an execution domain default other than packed
single, as that would cause us to mix movss and movsd with integer
vector code on a regular basis, a very bad mixture.
llvm-svn: 228135
This removes a hardcoded list of instructions in the CodeEmitter. Eventually I intend to remove the predicates on the affected instructions since in any given mode two of them are valid if we supported addr32/addr16 prefixes in the assembler.
llvm-svn: 224809
The new attributes are NumElts and the CD8TupleForm. This prepares the code
to enable x8 and x2 inserts.
NFC, no change in X86.td.expanded except for the new attributes.
llvm-svn: 219871
This change further evolves the base class AVX512_masking in order to make it
suitable for the masking variants of the FMA instructions.
Besides AVX512_masking there is now a new base class that instructions
including FMAs can use: AVX512_masking_3src. With three-source (destructive)
instructions one of the sources is already tied to the destination. This
difference from AVX512_masking is captured by this new class. The common bits
between _masking and _masking_3src are broken out into a new super class
called AVX512_masking_common.
As with valign, there is some corresponding restructuring of the underlying
format classes. The idea is the same we want to derive from two classes
essentially: one providing the format bits and another format-independent
multiclass supplying the various masking and non-masking instruction variants.
Existing fma tests in avx512-fma*.ll provide coverage here for the non-masking
variants. For masking, the next patches in the series will add intrinsics and
intrinsic tests.
For AVX512_masking_3src to work, the (ins ...) dag has to be passed *without*
the leading source operand that is tied to dst ($src1). This is necessary to
properly construct the (ins ...) for the different variants. For the record,
I did check that if $src is mistakenly included, you do get a fairly intuitive
error message from the tablegen backend.
Part of <rdar://problem/17688758>
llvm-svn: 215660
After adding the masking variants to several instructions, I have decided to
experiment with generating these from the non-masking/unconditional
variant. This will hopefully reduce the amount repetition that we currently
have in order to define an instruction with all its variants (for a reg/mem
instruction this would be 6 instruction defs and 2 Pat<> for the intrinsic).
The patch is the first cut that is currently only applied to valignd/q to make
the patch small.
A few notes on the approach:
* In order to stitch together the dag for both the conditional and the
unconditional patterns I pass the RHS of the set rather than the full
pattern (set dest, RHS).
* Rather than subclassing each instruction base class (e.g. AVX512AIi8),
with a masking variant which wouldn't scale, I derived the masking
instructions from a new base class AVX512 (this is just I<> with
Requires<HasAVX512>). The instructions derive from this now, plus a new set
of classes that add the format bits and everything else that instruction
base class provided (i.e. AVX512AIi8 vs. AVX512AIi8Base).
I hope we can go incrementally from here. I expect that:
* We will need different variants of the masking class. One example is
instructions requiring three vector sources. In this case we tie one of the
source operands to dest rather than a new implicit source operand ($src0)
* Add the zero-masking variant
* Add more AVX512*Base classes as new uses are added
I've looked at X86.td.expanded before and after to make sure that nothing got
lost for valignd/q.
llvm-svn: 215125
This allows assembling the two new instructions, encls and enclu for the
SKX processor model.
Note the diffs are a bigger than what might think, but to fit the new
MRM_CF and MRM_D7 in things in the right places things had to be
renumbered and shuffled down causing a bit more diffs.
rdar://16228228
llvm-svn: 214460
Passes the computed scaling factor in TSFlags rather than the old attributes.
Also removes the C++ version of computing the scaling factor (MemObjSize)
along with the asserts added by the previous patch.
No functional change.
llvm-svn: 213279
This does not actually move the logic yet but reimplements it in the Tablegen
language. Then asserts that the new implementation results in the same value.
The next patch will remove the assert and the temporary use of the TSFlags and
remove the C++ implementation.
The formula requires a limited form of the logical left and right operators.
I implemented these with the bit-extract/insert operator (i.e. blah{bits}).
No functional change.
llvm-svn: 213278
Original commits messages:
Add MRMXr/MRMXm form to X86 for use by instructions which treat the 'reg' field of modrm byte as a don't care value. Will allow for simplification of disassembler code.
Simplify a bunch of code by removing the need for the x86 disassembler table builder to know about extended opcodes. The modrm forms are sufficient to convey the information.
llvm-svn: 201065
r201059 appears to cause a crash in a bootstrapped build of clang. Craig
isn't available to look at it right now, so I'm reverting it while he
investigates.
llvm-svn: 201064
These should end up (in ELF) as R_X86_64_32S relocs, not R_X86_64_32.
Kill the horrid and incomplete special case and FIXME in
EncodeInstruction() and set things up so it can infer the signedness
from the ImmType just like it can the size and whether it's PC-relative.
llvm-svn: 200495
This finishes the job started in r198756, and creates separate opcodes for
64-bit vs. 32-bit versions of the rest of the RET instructions too.
LRETL/LRETQ are interesting... I can't see any justification for their
existence in the SDM. There should be no 'LRETL' in 64-bit mode, and no
need for a REX.W prefix for LRETQ. But this is what GAS does, and my
Sandybridge CPU and an Opteron 6376 concur when tested as follows:
asm __volatile__("pushq $0x1234\nmovq $0x33,%rax\nsalq $32,%rax\norq $1f,%rax\npushq %rax\nlretl $8\n1:");
asm __volatile__("pushq $1234\npushq $0x33\npushq $1f\nlretq $8\n1:");
asm __volatile__("pushq $0x33\npushq $1f\nlretq\n1:");
asm __volatile__("pushq $0x1234\npushq $0x33\npushq $1f\nlretq $8\n1:");
cf. PR8592 and commit r118903, which added LRETQ. I only added LRETIQ to
match it.
I don't quite understand how the Intel syntax parsing for ret
instructions is working, despite r154468 allegedly fixing it. Aren't the
explicitly sized 'retw', 'retd' and 'retq' supposed to work? I have at
least made the 'lretq' work with (and indeed *require*) the 'q'.
llvm-svn: 199106
The 0x66 prefix toggles between 16-bit and 32-bit addressing mode.
So in 32-bit mode it is used to switch to 16-bit addressing mode for the
following instruction, while in 16-bit mode it's the other way round — it's
used to switch to 32-bit mode instead.
Thus, emit the 0x66 prefix byte for OpSize only in 32-bit (and 64-bit) mode,
and introduce a new OpSize16 bit which is used in 16-bit mode instead.
This is just the basic infrastructure for that change; a subsequent patch
will add the new OpSize16 bit to the 32-bit instructions that need it.
Patch from David Woodhouse.
llvm-svn: 198586
That's what it actually means, and with 16-bit support it's going to be
a little more relevant since in a few corner cases we may actually want
to distinguish between 16-bit and 32-bit mode (for example the bare 'push'
aliases to pushw/pushl etc.)
Patch by David Woodhouse
llvm-svn: 197768
Implements Instruction scheduler latencies for Silvermont,
using latencies from the Intel Silvermont Optimization Guide.
Auto detects SLM.
Turns on post RA scheduler when generating code for SLM.
llvm-svn: 190717
As these two instructions in AVX extension are privileged instructions for
special purpose, it's only expected to be used in inlined assembly.
llvm-svn: 179266
All the instructions tagged with IIC_DEFAULT had nothing in common, and
we already have a NoItineraries class to represent untagged
instructions.
llvm-svn: 177937
- Add RTM code generation support throught 3 X86 intrinsics:
xbegin()/xend() to start/end a transaction region, and xabort() to abort a
tranaction region
llvm-svn: 167573
- Add 'UseSSEx' to force SSE legacy insn not being selected when AVX is
enabled.
As the penalty of inter-mixing SSE and AVX instructions, we need
prevent SSE legacy insn from being generated except explicitly
specified through some intrinsics. For patterns supported by both
SSE and AVX, so far, we force AVX insn will be tried first relying on
AddedComplexity or position in td file. It's error-prone and
introduces bugs accidentally.
'UseSSEx' is disabled when AVX is turned on. For SSE insns inherited
by AVX, we need this predicate to force VEX encoding or SSE legacy
encoding only.
For insns not inherited by AVX, we still use the previous predicates,
i.e. 'HasSSEx'. So far, these insns fall into the following
categories:
* SSE insns with MMX operands
* SSE insns with GPR/MEM operands only (xFENCE, PREFETCH, CLFLUSH,
CRC, and etc.)
* SSE4A insns.
* MMX insns.
* x87 insns added by SSE.
2 test cases are modified:
- test/CodeGen/X86/fast-isel-x86-64.ll
AVX code generation is different from SSE one. 'vcvtsi2sdq' cannot be
selected by fast-isel due to complicated pattern and fast-isel
fallback to materialize it from constant pool.
- test/CodeGen/X86/widen_load-1.ll
AVX code generation is different from SSE one after fixing SSE/AVX
inter-mixing. Exec-domain fixing prefers 'vmovapd' instead of
'vmovaps'.
llvm-svn: 162919
Adds an instruction itinerary to all x86 instructions, giving each a default latency of 1, using the InstrItinClass IIC_DEFAULT.
Sets specific latencies for Atom for the instructions in files X86InstrCMovSetCC.td, X86InstrArithmetic.td, X86InstrControl.td, and X86InstrShiftRotate.td. The Atom latencies for the remainder of the x86 instructions will be set in subsequent patches.
Adds a test to verify that the scheduler is working.
Also changes the scheduling preference to "Hybrid" for i386 Atom, while leaving x86_64 as ILP.
Patch by Preston Gurd!
llvm-svn: 149558
if (HasAVX)
X86SSELevel = NoMMXSSE;
This is so patterns that are predicated on hasSSE3, etc. would not be selected when avx is available. Instead, the AVX variant is selected.
However, this breaks instructions which do not have AVX variants.
The right way to fix this is for the SSE but not-AVX patterns to predicate on something like hasSSE3() && !hasAVX().
Then we can take out the hack in X86Subtarget.cpp. Patterns which do not have AVX variants do not need to change.
However, we need to audit all the patterns before we make the change. This patch is workaround that fixes one specific case,
the prefetch instructions. rdar://10538297
llvm-svn: 146163
shuffle before inserting on a 256-bit vector.
- Add AVX versions of movd/movq instructions
- Introduce a few COPY patterns to match insert_subvector instructions.
This turns a trivial insert_subvector instruction into a register copy,
coalescing the xmm into a ymm and avoid emiting on more instruction.
llvm-svn: 136002
Elena Demikhovsky