Broken parent scope pointers in inlined DIVariables can cause
ensureAbstractVariableIsCreated to insert new abstract scopes, thus
invalidating the iterator in this loop and leading to hard-to-debug
crashes. Useful when manually reducing IR for testcases.
llvm-svn: 219628
This introduces access to the AbstractSPDies map from DwarfDebug so
DwarfCompileUnit can access it. Eventually this'll sink down to
DwarfFile, but it'll still be generically accessible - not much
encapsulation to provide it. (constructInlinedScopeDIE could stay
further up, in DwarfFile to avoid exposing this - but I don't think
that's particularly better)
llvm-svn: 219411
(& add a few accessors/make a couple of things public for this - it's a
bit of a toss-up, but I think I prefer it this way, keeping some more of
the meaty code down in DwarfCompileUnit - if only to make for smaller
implementation files, etc)
I think we could simplify range handling a bit if we removed the range
lists from each unit and just put a single range list on DwarfDebug,
similar to address pooling.
llvm-svn: 219370
One of many steps to generalize subprogram emission to both the DWO and
non-DWO sections (to emit -gmlt-like data under fission). Once the
functions are pushed down into DwarfCompileUnit some of the data
structures will be pushed at least into DwarfFile so that they can be
unique per-file, allowing emission to both files independently.
llvm-svn: 219345
It was just calling a bunch of DwarfUnit functions anyway, as can be
seen by the simplification of removing "TheCU" from all the function
calls in the implementation.
llvm-svn: 219103
This requires exposing some of the current function state from
DwarfDebug. I hope there's not too much of that to expose as I go
through all the functions, but it still seems nicer to expose singular
data down to multiple consumers, than have consumers expose raw mapping
data structures up to DwarfDebug for building subprograms.
Part of a series of refactoring to allow subprograms in both the
skeleton and dwo CUs under Fission.
llvm-svn: 219060
In preparation for sinking all the subprogram emission code down from
DwarfDebug into DwarfCompileUnit, this will avoid bloating
DwarfUnit.h/cpp greatly and make concerns a bit more clear/isolated.
(sinking this handling down is part of the work to handle emitting
minimal subprograms for -gmlt-like data into the skeleton CU under
fission)
llvm-svn: 219057
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 219010
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 218914
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
llvm-svn: 218787
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
llvm-svn: 218778
This allows proper disambiguation of unbounded arrays and arrays of zero
bound ("struct foo { int x[]; };" and "struct foo { int x[0]; }"). GCC
instead produces an upper bound of -1 in the latter situation, but count
seems tidier. This way lower_bound is provided if it's not the language
default and count is provided if the count is known, otherwise it's
omitted. Simple.
If someone wants to look at rdar://problem/12566646 and see if this
change is acceptable to that bug/fix, that might be helpful (see the
empty-and-one-elem-array.ll test case which cites that radar).
llvm-svn: 218726
No functional change. Pre-emptive refactoring before I start pushing
some of this subprogram creation down into DWARFCompileUnit so I can
build different subprograms in the skeleton unit from the dwo unit for
adding -gmlt-like data to the skeleton.
llvm-svn: 218713
r218129 omits DW_TAG_subprograms which have no inlined subroutines when
emitting -gmlt data. This makes -gmlt very low cost for -O0 builds.
Darwin's dsymutil reasonably considers a CU empty if it has no
subprograms (which occurs with the above optimization in -O0 programs
without any force_inline function calls) and drops the line table, CU,
and everything in this situation, making backtraces impossible.
Until dsymutil is modified to account for this, disable this
optimization on Darwin to preserve the desired functionality.
(see r218545, which should be reverted after this patch, for other
discussion/details)
Footnote:
In the long term, it doesn't look like this scheme (of simplified debug
info to describe inlining to enable backtracing) is tenable, it is far
too size inefficient for optimized code (the DW_TAG_inlined_subprograms,
even once compressed, are nearly twice as large as the line table
itself (also compressed)) and we'll be considering things like Cary's
two level line table proposal to encode all this information directly in
the line table.
llvm-svn: 218702
To reduce the size of -gmlt data, skip the subprograms without any
inlined subroutines. Since we've now got the ability to make these
determinations in the backend (funnily enough - we added the flag so we
wouldn't produce ranges under -gmlt, but with this change we use the
flag, but go back to producing ranges under -gmlt).
Instead, just produce CU ranges to inform the consumer which parts of
the code are described by this CU's line table. Tools could inspect the
line table directly to compute the range, but the CU ranges only seem to
be about 0.5% of object/executable size, so I'm not too worried about
teaching llvm-symbolizer that trick just yet - it's certainly a possible
piece of future work.
Update an llvm-symbolizer test just to demonstrate that this schema is
acceptable there (if it wasn't, the compiler-rt tests would catch this,
but good to have an in-llvm-tree test for llvm-symbolizer's behavior
here)
Building the clang binary with -gmlt with this patch reduces the total
size of object files by 5.1% (5.56% without ranges) without compression
and the executable by 4.37% (4.75% without ranges).
llvm-svn: 218129
Summary:
This will allow to request the creation of a forward delacred variable
at is point of use (for imported declarations, this will be
DwarfDebug::constructImportedEntityDIE) rather than having to put the
forward decl in a retention list.
Note that getOrCreateGlobalVariable returns the actual definition DIE when the
routine creates a declaration and a definition DIE. If you agree this is the
right behavior, then I'll have a followup patch that registers the definition
in the DIE map instead of the declaration as it is today (this 'breaks' only
one test, where we test that the imported entity is the declaration). I'm
not sure what's best here, but it's easy enough for a consumer to follow the
DW_AT_specification link to get to the declaration, whereas it takes more
work to find the actual definition from a declaration DIE.
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5381
llvm-svn: 218126
This omission will be done in a fancier manner once we're dealing with
"put gmlt in the skeleton CUs under fission" - it'll have to be
conditional on the kind of CU we're emitting into (skeleton or gmlt).
llvm-svn: 218098
The patch moved some logic around in an attempt to generate potentially more
DW_AT_declaration attributes. The patch was flawed though and it stopped
generating the attribute in some cases.
llvm-svn: 218060
Summary:
This doesn't show up today as we don't emit decalration only variables. This
will be tested when the followup patches implementing import of forward
declared entities lands in clang.
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5382
llvm-svn: 218041
On MachO, and MachO only, we cannot have a truly empty function since that
breaks the linker logic for atomizing the section.
When we are emitting a frame pointer, the presence of an unreachable will
create a cfi instruction pointing past the last instruction. This is perfectly
fine. The FDE information encodes the pc range it applies to. If some tool
cannot handle this, we should explicitly say which bug we are working around
and only work around it when it is actually relevant (not for ELF for example).
Given the unreachable we could omit the .cfi_def_cfa_register, but then
again, we could also omit the entire function prologue if we wanted to.
llvm-svn: 217801
And since it /looked/ like the DwarfStrSectionSym was unused, I tried
removing it - but then it turned out that DwarfStringPool was
reconstructing the same label (and expecting it to have already been
emitted) and uses that.
So I kept it around, but wanted to pass it in to users - since it seemed
a bit silly for DwarfStringPool to have it passed in and returned but
itself have no use for it. The only two users don't handle strings in
both .dwo and .o files so they only ever need the one symbol - no need
to keep it (and have an unused symbol) in the DwarfStringPool used for
fission/.dwo.
Refactor a bunch of accelerator table usage to remove duplication so I
didn't have to touch 4-5 callers.
llvm-svn: 217628
So that the two operations in DwarfDebug couldn't get separated (because
I accidentally separated them in some work in progress), put them
together. While we're here, move DwarfUnit::addRange to
DwarfCompileUnit, since it's not relevant to type units.
llvm-svn: 217468
PrevSection/PrevCU are used to detect holes in the address range of a CU
to ensure the DW_AT_ranges does not include those holes. When we see a
function with no debug info, though it may be in the same range as the
prior and subsequent functions, there should be a gap in the CU's
ranges. By setting PrevCU to null in that case, the range would not be
extended to cover the gap.
llvm-svn: 217466
It's probably not a huge deal to not do this - if we could, maybe the
address could be reused by a subprogram low_pc and avoid an extra
relocation, but it's just one per CU at best.
llvm-svn: 217338
The structures for Windows unwinding are shared across multiple platforms.
Indicate the encoding to be used for the particular target. Use this to switch
the unwind emitter instantiated by the AsmPrinter.
llvm-svn: 216895
DW_TAG_lexical_scopes inform debuggers about the instruction range for
which a given variable (or imported declaration/module/etc) is valid. If
the scope doesn't itself contain any such entities, it's a waste of
space and should be omitted.
We were correctly doing this for entirely empty leaves, but not for
intermediate nodes.
Reduces total (not just debug sections) .o file size for a bootstrap
-gmlt LLVM by 22% and bootstrap -gmlt clang executable by 13%. The wins
for a full -g build will be less as a % (and in absolute terms), but
should still be substantial - with some of that win being fewer
relocations, thus more substantiall reducing link times than fewer bytes
alone would have.
llvm-svn: 216861
This makes the emptiness of the scope with regards to variables and
nested scopes is the same as with regards to imported entities. Just
check if we had nothing at all before we build the node.
llvm-svn: 216840
First of many steps to improve lexical scope construction (to omit
trivial lexical scopes - those without any direct variables). To that
end it's easier not to create imported entities directly into the
lexical scope node, but to build them, then add them if necessary.
llvm-svn: 216838
specifier and change the default behavior to only emit the
DW_AT_accessibility(public) attribute when the isPublic() is explicitly
set.
rdar://problem/18154959
llvm-svn: 216799
Rushed when I realized I hadn't committed the FreeDeleter for a clang
change I'd committed, and didn't check that I had things lying around in
my client.
Apologies for the noise.
llvm-svn: 216792
Somewhat unnoticed in the original implementation of discriminators, but
it could cause instructions to end up in new, small,
DW_TAG_lexical_blocks due to the use of DILexicalBlock to track
discriminator changes.
Instead, use DILexicalBlockFile which we already use to track file
changes without introducing new scopes, so it works well to track
discriminator changes in the same way.
llvm-svn: 216239
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
refactoring in 215384. This way it can unique multiple entries describing
the same piece even if they don't have the exact same location.
(The same piece may get merged in and be added from OpenRanges).
There ought to be a more elegant solution for this, though.
llvm-svn: 215418
buildLocationLists easier to read.
The previous implementation conflated the merging of individual pieces
and the merging of entire DebugLocEntries.
By splitting this functionality into two separate functions the intention
of the code should be clearer.
llvm-svn: 215383
Due to an unnecessary special case, inlined arguments that happened to
be from the same function as they were inlined into were misclassified
as non-inline arguments and would overwrite the non-inlined arguments.
Assert that we never overwrite a function's arguments, and stop
misclassifying inlined arguments as non-inline arguments to fix this
issue.
Excuse the rather crappy test case - handcrafted IR might do better, or
someone who understands better how to tickle the inliner to create a
recursive inlining situation like this (though it may also be necessary
to tickle the variable in a particular way to cause it to be recorded in
the MMI side table and go down this particular path for location
information).
llvm-svn: 215157
In r210492 the logic of calculateDbgValueHistory was changed to end
register variable live ranges at the end of MBB conditionally on
the fact that the register was or not clobbered by the function body.
This requires an initial scan of all the operands of the function
to collect all clobbered registers. In a second pass over all
instructions, we compare this set with the set of clobbered
registers for the current MachineInstruction. This modification
incurred a compilation time regression on some benchmarks: the
debug info emission phase takes ~10% more time.
While a small performance hit is unavoidable due to the initial
scan requirement, we can improve the situation by avoiding to
create too many temporary sets and just use lambdas to work directly
on the result of the initial scan.
Fixes <rdar://problem/17884104>
Patch by Frederic Riss!
llvm-svn: 214987
The handling of the epilogue is best expressed as an early exit and
there is no reason to look for register defs in DbgValue MIs.
Patch by Frederic Riss!
llvm-svn: 214986
This was coming in weird debug info that had variables (and hence
debug_locs) but was in GMLT mode (because it was missing the 13th field
of the compile_unit metadata) so no ranges were constructed. We should
always have at least one range for any CU with a debug_loc in it -
because the range should cover the debug_loc.
The assertion just ensures that the "!= 1" range case inside the
subsequent loop doesn't get entered for the case where there are no
ranges at all, which should never reach here in the first place.
llvm-svn: 214939
This simplifies construction and usage while making the data structure
smaller. It was a holdover from the days when we didn't have a separate
DebugLocList and all we had was a flat list of DebugLocEntries.
llvm-svn: 214933
shorter/easier and have the DAG use that to do the same lookup. This
can be used in the future for TargetMachine based caching lookups from
the MachineFunction easily.
Update the MIPS subtarget switching machinery to update this pointer
at the same time it runs.
llvm-svn: 214838
Originally reverted in r213432 with flakey failures on an ASan self-host
build. After reduction it seems to be the same issue fixed in r213805
(ArgPromo + DebugInfo: Handle updating debug info over multiple
applications of argument promotion) and r213952 (by having
LiveDebugVariables strip dbg_value intrinsics in functions that are not
described by debug info). Though I cannot explain why this failure was
flakey...
llvm-svn: 214761
variables (for example, by-value struct arguments passed in registers, or
large integer values split across several smaller registers).
On the IR level, this adds a new type of complex address operation OpPiece
to DIVariable that describes size and offset of a variable fragment.
On the DWARF emitter level, all pieces describing the same variable are
collected, sorted and emitted as DWARF expressions using the DW_OP_piece
and DW_OP_bit_piece operators.
http://reviews.llvm.org/D3373
rdar://problem/15928306
What this patch doesn't do / Future work:
- This patch only adds the backend machinery to make this work, patches
that change SROA and SelectionDAG's type legalizer to actually create
such debug info will follow. (http://reviews.llvm.org/D2680)
- Making the DIVariable complex expressions into an argument of dbg.value
will reduce the memory footprint of the debug metadata.
- The sorting/uniquing of pieces should be moved into DebugLocEntry,
to facilitate the merging of multi-piece entries.
llvm-svn: 214576
Per feedback on r214111, we are going to use null to represent unspecified
parameter. If the type array is {null}, it means a function that returns void;
If the type array is {null, null}, it means a variadic function that returns
void. In summary if we have more than one element in the type array and the last
element is null, it is a variadic function.
rdar://17628609
llvm-svn: 214189
The enum types array by design contains pointers to MDNodes rather than DIRefs.
Unique them when handling the enum types in DwarfDebug.
rdar://17628609
llvm-svn: 214139
DITypeArray is an array of DITypeRef, at its creation, we will create
DITypeRef (i.e use the identifier if the type node has an identifier).
This is the last patch to unique the type array of a subroutine type.
rdar://17628609
llvm-svn: 214132
This is the second of a series of patches to handle type uniqueing of the
type array for a subroutine type.
For vector and array types, getElements returns the array of subranges, so it
is a better name than getTypeArray. Even for class, struct and enum types,
getElements returns the members, which can be subprograms.
setArrays can set up to two arrays, the second is the templates.
This commit should have no functionality change.
llvm-svn: 214112
This recommits r208930, r208933, and r208975 (by reverting r209338) and
reverts r209529 (the FIXME to readd this functionality once the tools
were fixed) now that DWP has been fixed to cope with a single section
for all fission type units.
Original commit message:
"Since type units in the dwo file are handled by a debug aware tool,
they don't need to leverage the ELF comdat grouping to implement
deduplication. Avoid creating all the .group sections for these as a
space optimization."
llvm-svn: 213956
Reverted by Eric Christopher (Thanks!) in r212203 after Bob Wilson
reported LTO issues. Duncan Exon Smith and Aditya Nandakumar helped
provide a reduced reproduction, though the failure wasn't too hard to
guess, and even easier with the example to confirm.
The assertion that the subprogram metadata associated with an
llvm::Function matches the scope data referenced by the DbgLocs on the
instructions in that function is not valid under LTO. In LTO, a C++
inline function might exist in multiple CUs and the subprogram metadata
nodes will refer to the same llvm::Function. In this case, depending on
the order of the CUs, the first intance of the subprogram metadata may
not be the one referenced by the instructions in that function and the
assertion will fail.
A test case (test/DebugInfo/cross-cu-linkonce-distinct.ll) is added, the
assertion removed and a comment added to explain this situation.
This was then reverted again in r213581 as it caused PR20367. The root
cause of this was the early exit in LiveDebugVariables meant that
spurious DBG_VALUE intrinsics that referenced dead variables were not
removed, causing an assertion/crash later on. The fix is to have
LiveDebugVariables strip all DBG_VALUE intrinsics in functions without
debug info as they're not needed anyway. Test case added to cover this
situation (that occurs when a debug-having function is inlined into a
nodebug function) in test/DebugInfo/X86/nodebug_with_debug_loc.ll
Original commit message:
If a function isn't actually in a CU's subprogram list in the debug info
metadata, ignore all the DebugLocs and don't try to build scopes, track
variables, etc.
While this is possibly a minor optimization, it's also a correctness fix
for an incoming patch that will add assertions to LexicalScopes and the
debug info verifier to ensure that all scope chains lead to debug info
for the current function.
Fix up a few test cases that had broken/incomplete debug info that could
violate this constraint.
Add a test case where this occurs by design (inlining a
debug-info-having function in an attribute nodebug function - we want
this to work because /if/ the nodebug function is then inlined into a
debug-info-having function, it should be fine (and will work fine - we
just stitch the scopes up as usual), but should the inlining not happen
we need to not assert fail either).
llvm-svn: 213952
This patch minimizes the number of nops that must be emitted on X86 to satisfy
stackmap shadow constraints.
To minimize the number of nops inserted, the X86AsmPrinter now records the
size of the most recent stackmap's shadow in the StackMapShadowTracker class,
and tracks the number of instruction bytes emitted since the that stackmap
instruction was encountered. Padding is emitted (if it is required at all)
immediately before the next stackmap/patchpoint instruction, or at the end of
the basic block.
This optimization should reduce code-size and improve performance for people
using the llvm stackmap intrinsic on X86.
<rdar://problem/14959522>
llvm-svn: 213892
Recommits 212776 which was reverted in r212793. This has been committed
and recommitted a few times as I try to test it harder and find/fix more
issues. The most recent revert was due to an asan bot failure which I
can't seem to reproduce locally, though I believe I'm following all the
steps the buildbot does.
So I'm going to recommit this in the hopes of investigating the failure
on the buildbot itself... apologies in advance for the bot noise. If
anyone sees failures with this /please/ provide me with any
reproductions, etc.
llvm-svn: 213391
COFF lacks a feature that other object file formats support: mergeable
sections.
To work around this, MSVC sticks constant pool entries in special COMDAT
sections so that each constant is in it's own section. This permits
unused constants to be dropped and it also allows duplicate constants in
different translation units to get merged together.
This fixes PR20262.
Differential Revision: http://reviews.llvm.org/D4482
llvm-svn: 213006
Found during windows unwinding work. This header is indirectly included through
a chain leading through Support/Win64EH.h. Explicitly include the header. NFC.
llvm-svn: 212955
This reverts commit r212776.
Nope, still seems to be failing on the sanitizer bots... but hey, not
the msan self-host anymore, it's failing in asan now. I'll start looking
there next.
llvm-svn: 212793
Committed in r212205 and reverted in r212226 due to msan self-hosting
failure, I believe I've got that fixed by r212761 to Clang.
Original commit message:
"Originally committed in r211723, reverted in r211724 due to failure
cases found and fixed (ArgumentPromotion: r211872, Inlining: r212065),
committed again in r212085 and reverted again in r212089 after fixing
some other cases, such as debug info subprogram lists not keeping track
of the function they represent (r212128) and then short-circuiting
things like LiveDebugVariables that build LexicalScopes for functions
that might not have full debug info.
And again, I believe the invariant actually holds for some reasonable
amount of code (but I'll keep an eye on the buildbots and see what
happens... ).
Original commit message:
PR20038: DebugInfo: Inlined call sites where the caller has debug info
but the call itself has no debug location.
This situation does bad things when inlined, so I've fixed Clang not to
produce inlinable call sites without locations when the caller has debug
info (in the one case where I could find that this occurred). This
updates the PR20038 test case to be what clang now produces, and readds
the assertion that had to be removed due to this bug.
I've also beefed up the debug info verifier to help diagnose these
issues in the future, and I hope to add checks to the inliner to just
assert-fail if it encounters this situation. If, in the future, we
decide we have to cope with this situation, the right thing to do is
probably to just remove all the DebugLocs from the inlined
instructions."
llvm-svn: 212776
Reverted by Eric Christopher (Thanks!) in r212203 after Bob Wilson
reported LTO issues. Duncan Exon Smith and Aditya Nandakumar helped
provide a reduced reproduction, though the failure wasn't too hard to
guess, and even easier with the example to confirm.
The assertion that the subprogram metadata associated with an
llvm::Function matches the scope data referenced by the DbgLocs on the
instructions in that function is not valid under LTO. In LTO, a C++
inline function might exist in multiple CUs and the subprogram metadata
nodes will refer to the same llvm::Function. In this case, depending on
the order of the CUs, the first intance of the subprogram metadata may
not be the one referenced by the instructions in that function and the
assertion will fail.
A test case (test/DebugInfo/cross-cu-linkonce-distinct.ll) is added, the
assertion removed and a comment added to explain this situation.
Original commit message:
If a function isn't actually in a CU's subprogram list in the debug info
metadata, ignore all the DebugLocs and don't try to build scopes, track
variables, etc.
While this is possibly a minor optimization, it's also a correctness fix
for an incoming patch that will add assertions to LexicalScopes and the
debug info verifier to ensure that all scope chains lead to debug info
for the current function.
Fix up a few test cases that had broken/incomplete debug info that could
violate this constraint.
Add a test case where this occurs by design (inlining a
debug-info-having function in an attribute nodebug function - we want
this to work because /if/ the nodebug function is then inlined into a
debug-info-having function, it should be fine (and will work fine - we
just stitch the scopes up as usual), but should the inlining not happen
we need to not assert fail either).
llvm-svn: 212649
The PowerPC 128-bit long double data type (ppcf128 in LLVM) is in fact a
pair of two doubles, where one is considered the "high" or
more-significant part, and the other is considered the "low" or
less-significant part. When a ppcf128 value is stored in memory or a
register pair, the high part always comes first, i.e. at the lower
memory address or in the lower-numbered register, and the low part
always comes second. This is true both on big-endian and little-endian
PowerPC systems. (Similar to how with a complex number, the real part
always comes first and the imaginary part second, no matter the byte
order of the system.)
This was implemented incorrectly for little-endian systems in LLVM.
This commit fixes three related issues:
- When printing an immediate ppcf128 constant to assembler output
in emitGlobalConstantFP, emit the high part first on both big-
and little-endian systems.
- When lowering a ppcf128 type to a pair of f64 types in SelectionDAG
(which is used e.g. when generating code to load an argument into a
register pair), use correct low/high part ordering on little-endian
systems.
- In a related issue, because lowering ppcf128 into a pair of f64 must
operate differently from lowering an int128 into a pair of i64,
bitcasts between ppcf128 and int128 must not be optimized away by the
DAG combiner on little-endian systems, but must effect a word-swap.
Reviewed by Hal Finkel.
llvm-svn: 212274
This reverts commit r212205.
Reverting this again, still seeing crashes when building compiler-rt...
Sorry for the continued noise, not sure why I'm failing to reproduce
this locally.
llvm-svn: 212226
Originally committed in r211723, reverted in r211724 due to failure
cases found and fixed (ArgumentPromotion: r211872, Inlining: r212065),
committed again in r212085 and reverted again in r212089 after fixing
some other cases, such as debug info subprogram lists not keeping track
of the function they represent (r212128) and then short-circuiting
things like LiveDebugVariables that build LexicalScopes for functions
that might not have full debug info.
And again, I believe the invariant actually holds for some reasonable
amount of code (but I'll keep an eye on the buildbots and see what
happens... ).
Original commit message:
PR20038: DebugInfo: Inlined call sites where the caller has debug info
but the call itself has no debug location.
This situation does bad things when inlined, so I've fixed Clang not to
produce inlinable call sites without locations when the caller has debug
info (in the one case where I could find that this occurred). This
updates the PR20038 test case to be what clang now produces, and readds
the assertion that had to be removed due to this bug.
I've also beefed up the debug info verifier to help diagnose these
issues in the future, and I hope to add checks to the inliner to just
assert-fail if it encounters this situation. If, in the future, we
decide we have to cope with this situation, the right thing to do is
probably to just remove all the DebugLocs from the inlined instructions.
llvm-svn: 212205
If a function isn't actually in a CU's subprogram list in the debug info
metadata, ignore all the DebugLocs and don't try to build scopes, track
variables, etc.
While this is possibly a minor optimization, it's also a correctness fix
for an incoming patch that will add assertions to LexicalScopes and the
debug info verifier to ensure that all scope chains lead to debug info
for the current function.
Fix up a few test cases that had broken/incomplete debug info that could
violate this constraint.
Add a test case where this occurs by design (inlining a
debug-info-having function in an attribute nodebug function - we want
this to work because /if/ the nodebug function is then inlined into a
debug-info-having function, it should be fine (and will work fine - we
just stitch the scopes up as usual), but should the inlining not happen
we need to not assert fail either).
llvm-svn: 212203
This reverts commit r212085.
This breaks the sanitizer bot... & I thought I'd tried pretty hard not
to do that. Guess I need to try harder.
llvm-svn: 212089
Originally committed in r211723, reverted in r211724 due to failure
cases found and fixed (ArgumentPromotion: r211872, Inlining: r212065),
and I now believe the invariant actually holds for some reasonable
amount of code (but I'll keep an eye on the buildbots and see what
happens... ).
Original commit message:
PR20038: DebugInfo: Inlined call sites where the caller has debug info
but the call itself has no debug location.
This situation does bad things when inlined, so I've fixed Clang not to
produce inlinable call sites without locations when the caller has debug
info (in the one case where I could find that this occurred). This
updates the PR20038 test case to be what clang now produces, and readds
the assertion that had to be removed due to this bug.
I've also beefed up the debug info verifier to help diagnose these
issues in the future, and I hope to add checks to the inliner to just
assert-fail if it encounters this situation. If, in the future, we
decide we have to cope with this situation, the right thing to do is
probably to just remove all the DebugLocs from the inlined instructions.
llvm-svn: 212085
This exception format is not specific to Windows x64. A similar approach is
taken on nearly all architectures. Generalise the name to reflect reality.
This will eventually be used for Windows on ARM data emission as well.
Switch the enum and namespace into an enum class.
llvm-svn: 212000
Rename the routines to reflect the reality that they are more related to call
frame information than to Win64 EH. Although EH is implemented in an intertwined
manner by augmenting with an exception handler and an associated parameter, the
majority of these routines emit information required to unwind the frames. This
also helps identify that these routines are generic for most windows platforms
(they apply equally to nearly all architectures except x86) although the
encoding of the information is architecture dependent.
Unwinding data is emitted via EmitWinCFI* and exception handling information via
EmitWinEH*.
llvm-svn: 211994
Reverting this again, didn't mean to commit it - while r211872 fixes one
of the issues here, there are still others to figure out and address.
This reverts commit r211871.
llvm-svn: 211873
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
llvm-svn: 211749
This situation does bad things when inlined, so I've fixed Clang not to
produce inlinable call sites without locations when the caller has debug
info (in the one case where I could find that this occurred). This
updates the PR20038 test case to be what clang now produces, and readds
the assertion that had to be removed due to this bug.
I've also beefed up the debug info verifier to help diagnose these
issues in the future, and I hope to add checks to the inliner to just
assert-fail if it encounters this situation. If, in the future, we
decide we have to cope with this situation, the right thing to do is
probably to just remove all the DebugLocs from the inlined instructions.
llvm-svn: 211723
--
This patch enables LLVM to emit Win64-native unwind info rather than
DWARF CFI. It handles all corner cases (I hope), including stack
realignment.
Because the unwind info is not flexible enough to describe stack frames
with a gap of unknown size in the middle, such as the one caused by
stack realignment, I modified register spilling code to place all spills
into the fixed frame slots, so that they can be accessed relative to the
frame pointer.
Patch by Vadim Chugunov!
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D4081
llvm-svn: 211691
In assembly the expression a=b is parsed as an assignment, so it should be
printed as one.
This remove a truly horrible hack for producing a label with "a=.". It would
be used by codegen but would never be reached by the asm parser. Sorry I
missed this when it was first committed.
llvm-svn: 211639
This patch enables LLVM to emit Win64-native unwind info rather than
DWARF CFI. It handles all corner cases (I hope), including stack
realignment.
Because the unwind info is not flexible enough to describe stack frames
with a gap of unknown size in the middle, such as the one caused by
stack realignment, I modified register spilling code to place all spills
into the fixed frame slots, so that they can be accessed relative to the
frame pointer.
Patch by Vadim Chugunov!
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D4081
llvm-svn: 211399
only 1/0 result like std::set. Some of the LLVM ADT already return unsigned
count(), while others still return bool count().
In continuation to r197879, this patch modifies DenseMap, DenseSet,
ScopedHashTable, ValueMap:: count() to return size_type instead of bool,
1 instead of true and 0 instead of false.
size_type is typedef-ed locally within each class to size_t.
http://reviews.llvm.org/D4018
Reviewed by dblaikie.
llvm-svn: 211350
The address pool was being emitted before location lists. The latter
could add more entries to the pool which would be lost/never emitted.
llvm-svn: 211284
Currently, llvm always emits a DWARF CIE with a version of 1, even when emitting
DWARF 3 or 4, which both support CIE version 3. This patch makes it emit the
newer CIE version when we are emitting DWARF 3 or 4. This will not reduce
compatibility, as we already emit other DWARF3/4 features, and is worth doing as
the DWARF3 spec removed some ambiguities in the interpretation of call frame
information.
It also fixes a minor bug where the "return address" field of the CIE was
encoded as a ULEB128, which is only valid when the CIE version is 3. There are
no test changes for this, because (as far as I can tell) none of the platforms
that we test have a return address register with a DWARF register number >127.
llvm-svn: 211272
I haven't nailed this down entirely, but this is about as small of a
test case as I can seem to construct and adequately demonstrates the
crasher. I'll continue investigating the root cause/fix(es).
llvm-svn: 210993
Now that we handle finding abstract variables at the end of the module,
remove the upfront handling and just ensure the abstract variable is
built when necessary.
In theory we could have a split implementation, where inlined variables
are immediately constructed referencing the abstract definition, and
concrete variables are delayed - but let's go with one solution for now
unless there's a reason not to.
llvm-svn: 210961
Rather than relying on abstract variables looked up at the time the
concrete variable is created, look them up at the end of the module to
ensure they're referenced even if they're created after the concrete
definition. This completes/matches the work done in r209677 to handle
this for the subprograms themselves.
llvm-svn: 210946
This doesn't fix the abstract variable handling yet, but it introduces a
similar delay mechanism as was added for subprograms, causing
DW_AT_location to be reordered to the beginning of the attribute list
for local variables, and fixes all the test fallout for that.
A subsequent commit will remove the abstract variable handling in
DbgVariable and just do the abstract variable lookup at module end to
ensure that abstract variables introduced after their concrete
counterparts are appropriately referenced by the concrete variable.
llvm-svn: 210943
DwarfException served as a base class for exception handling directive emission.
However, this is also used by other exception models (e.g. Win64EH). Rename
this class to EHStreamer and split it out of DwarfException.h. NFC.
Use the opportunity to fix up some of the documentation comments to match
current LLVM style. Also rename some functions to conform better with current
LLVM coding style.
llvm-svn: 210622
never be true in a well-defined context. The checking for null pointers
has been moved into the caller logic so it does not rely on undefined behavior.
llvm-svn: 210497
Don't terminate location ranges for register-described variables
at the end of machine basic block if this register is never modified
in the function body, except for the prologue and epilogue. Prologue
location is guessed by FrameSetup flags on MachineInstructions, while
epilogue location is deduced from debug locations of instructions
in the basic blocks ending with return instructions.
This patch is mostly targeted to fix non-trivial debug locations for
variables addressed via stack and frame pointers.
It is not really a generic fix. We can still produce poor debug info
for register-described variables if this register *is* modified somewhere
in the function, but in unrelated places. This might be the case for the debug
info in optimized binaries (e.g. for local variables in inlined functions).
LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting
DBG_VALUE instructions, but this pass is tied to greedy register allocator,
which is used in optimized builds only. Proper fix would likely involve
generalizing LiveDebugVariables to all register allocators. See more discussion
in http://reviews.llvm.org/D3933 review thread.
I'm proceeding with this patch to fix immediate severe problems and
important cases, e.g. fix completely broken debug info with AddressSanitizer
and fix PR19307 (missing debug info for by-value std::string arguments).
llvm-svn: 210492
This ensures that member functions, for example, are entered into
pubnames with their fully qualified name, rather than inside the global
namespace.
llvm-svn: 210379
* Section association cannot use just the section name as many
sections can have the same name. With this patch, the comdat symbol in
an assoc section is interpreted to mean a symbol in the associated
section and the mapping is discovered from it.
* Comdat symbols were not being set correctly. Instead we were getting
whatever was output first for that section.
A consequence is that associative sections now must use .section to
set the association. Using .linkonce would not work since it is not
possible to change a sections comdat symbol (it is used to decide if
we should create a new section or reuse an existing one).
This includes r210298, which was reverted because it was asserting
on an associated section having the same comdat as the associated
section.
llvm-svn: 210367
It includes a pass that rewrites all indirect calls to jumptable functions to pass through these tables.
This also adds backend support for generating the jump-instruction tables on ARM and X86.
Note that since the jumptable attribute creates a second function pointer for a
function, any function marked with jumptable must also be marked with unnamed_addr.
llvm-svn: 210280
Unused arguments were not being added to the argument list, but instead
treated as arbitrary scope variables. This meant they weren't carefully
added in the original argument order.
In this particular example, though, it turns out the argument is only
/mostly/ unused (well, actually it's entirely used, but in a specific
way). It's a struct that, due to ABI reasons, is decomposed into chunks
(exactly one chunk, since it has one member) and then passed. Since only
one of those chunks is used (SROA, etc, kill the original reconstitution
code) we don't have a location to describe the whole variable.
In this particular case, since the struct consists of just the one int,
once we have partial location information, this should have a location
that describes the entire variable (since the piece is the entirety of
the object).
And at some point we'll need to describe the location of even /entirely/
unused arguments so that they can at least be printed on function entry.
llvm-svn: 210231
Abstract variables within abstract scopes that are entirely optimized
away in their first inlining are omitted because their scope is not
present so the variable is never created. Instead, we should ensure the
scope is created so the variable can be added, even if it's been
optimized away in its first inlining.
This fixes the incorrect debug info in missing-abstract-variable.ll
(added in r210143) and passes an asserts self-hosting build, so
hopefully there's not more of these issues left behind... *fingers
crossed*.
llvm-svn: 210221
We would previously assert here when trying to figure out the section
for the global.
This makes us handle the situation more gracefully since the IR isn't
malformed.
Differential Revision: http://reviews.llvm.org/D4022
llvm-svn: 210215
Along with a test case to demonstrate that due to inlining order there
are cases where abstract variable DIEs are not constructed since the
abstract subprogram was built due to a previous inlining that optimized
away those variables. This produces incorrect debug info (the 'missing'
abstract variable causes the inlined instance of that variable to be
emitted with a full description (name, line, file) rather than
referencing the abstract origin), but this commit at least ensures that
it doesn't crash...
llvm-svn: 210143
This patch changes GlobalAlias to point to an arbitrary ConstantExpr and it is
up to MC (or the system assembler) to decide if that expression is valid or not.
This reduces our ability to diagnose invalid uses and how early we can spot
them, but it also lets us do things like
@test5 = alias inttoptr(i32 sub (i32 ptrtoint (i32* @test2 to i32),
i32 ptrtoint (i32* @bar to i32)) to i32*)
An important implication of this patch is that the notion of aliased global
doesn't exist any more. The alias has to encode the information needed to
access it in its metadata (linkage, visibility, type, etc).
Another consequence to notice is that getSection has to return a "const char *".
It could return a NullTerminatedStringRef if there was such a thing, but when
that was proposed the decision was to just uses "const char*" for that.
llvm-svn: 210062
This was previously committed in r209680 and reverted in r209683 after
it caused sanitizer builds to crash.
The issue seems to be that the DebugLoc associated with dbg.value IR
intrinsics isn't necessarily accurate. Instead, we duplicate the
DIVariables and add an InlinedAt field to them to record their
location.
We were using this InlinedAt field to compute the LexicalScope for the
variable, but not using it in the abstract DbgVariable construction and
mapping. This resulted in a formal parameter to the current concrete
function, correctly having no InlinedAt information, but incorrectly
having a DebugLoc that described an inlined location within the
function... thus an abstract DbgVariable was created for the variable,
but its DIE was never constructed (since the LexicalScope had no such
variable). This DbgVariable was silently ignored (by testing for a
non-null DIE on the abstract DbgVariable).
So, fix this by using the right scoping information when constructing
abstract DbgVariables.
In the long run, I suspect we want to undo the work that added this
second kind of location tracking and fix the places where the DebugLoc
propagation on the dbg.value intrinsic fails. This will shrink debug
info (by not duplicating DIVariables), make it more efficient (by not
having to construct new DIVariable metadata nodes to try to map back to
a single variable), and benefit all instructions.
But perhaps there are insurmountable issues with DebugLoc quality that
I'm unaware of... I just don't know how we can't /just keep the DebugLoc
from the dbg.declare to the dbg.values and never get this wrong/.
Some history context:
http://llvm.org/viewvc/llvm-project?view=revision&revision=135629http://llvm.org/viewvc/llvm-project?view=revision&revision=137253
llvm-svn: 209984
For MIPS, we have to encode the personality routine with
an indirect pointer to absptr; otherwise, some link warning
warning will be raised, and the program might crash in some
early MIPS Android device.
llvm-svn: 209907
Use more straightforward way to represent the set of instruction
ranges where the location of a user variable is defined - vector of pairs
of instructions (defining start/end of each range),
instead of a flattened vector of instructions where some instructions
are supposed to start the range, and the rest are supposed to "clobber" it.
Simplify the code which generates actual .debug_loc entries.
No functionality change.
llvm-svn: 209698
Current implementation of calculateDbgValueHistory already creates the
keys in the expected order (user variables are listed in order of appearance),
and should do so later by contract.
No functionality change.
llvm-svn: 209690
I'm not sure exactly where/how we end up with an abstract DbgVariable
with a null DIE, but we do... looking into it & will add a test and/or
fix when I figure it out.
Currently shows up in selfhost or compiler-rt builds.
llvm-svn: 209683
After much puppetry, here's the major piece of the work to ensure that
even when a concrete definition preceeds all inline definitions, an
abstract definition is still created and referenced from both concrete
and inline definitions.
Variables are still broken in this case (see comment in
dbg-value-inlined-parameter.ll test case) and will be addressed in
follow up work.
llvm-svn: 209677
A further step to correctly emitting concrete out of line definitions
preceeding inlined instances of the same program.
To do this, emission of subprograms must be delayed until required since
we don't know which (abstract only (if there's no out of line
definition), concrete only (if there are no inlined instances), or both)
DIEs are required at the start of the module.
To reduce the test churn in the following commit that actually fixes the
bug, this commit introduces the lazy DIE construction and cleans up test
cases that are impacted by the changes in the resulting DIE ordering.
llvm-svn: 209675
This is a precursor to fixing inlined debug info where the concrete,
out-of-line definition may preceed any inlined usage. To cope with this,
the attributes that may appear on the concrete definition or the
abstract definition are delayed until the end of the module. Then, if an
abstract definition was created, it is referenced (and no other
attributes are added to the out-of-line definition), otherwise the
attributes are added directly to the out-of-line definition.
In a couple of cases this causes not just reordering of attributes, but
reordering of types. When the creation of the attribute is delayed, if
that creation would create a type (such as for a DW_AT_type attribute)
then other top level DIEs may've been constructed during the delay,
causing the referenced type to be created and added after those
intervening DIEs. In the extreme case, in cross-cu-inlining.ll, this
actually causes the DW_TAG_basic_type for "int" to move from one CU to
another.
llvm-svn: 209674
This seems like a simple cleanup/improved consistency, but also helps
lay the foundation to fix the bug mentioned in the test case: concrete
definitions preceeding any inlined usage aren't properly split into
concrete + abstract (because they're not known to need it until it's too
late).
Once we start deferring this choice until later, we won't have the
choice to put concrete definitions for inlined subroutines in a
different scope from concrete definitions for non-inlined subroutines
(since we won't know at time-of-construction which one it'll be). This
change brings those two cases into alignment ahead of that future
chaneg/fix.
llvm-svn: 209547
It's not really a "ScopeDIE", as such - it's the abstract function
definition's DIE. And we usually use "SP" for subprograms, rather than
"Sub".
llvm-svn: 209499
constructSubprogramDIE was already called for every subprogram in every
CU when the module was started - there's no need to call it again at
module finalization.
llvm-svn: 209372
This reverts commit r208930, r208933, and r208975.
It seems not all fission consumers are ready to handle this behavior.
Reverting until tools are brought up to spec.
llvm-svn: 209338
Committed in r209178 then reverted in r209251 due to LTO breakage,
here's a proper fix for the case of the missing subprogram DIE. The DIEs
were there, just in other compile units. Using the SPMap we can find the
right compile unit to search for and produce cross-unit references to
describe this kind of inlining.
One existing test case needed to be updated because it had a function
that wasn't in the CU's subprogram list, so it didn't appear in the
SPMap.
llvm-svn: 209335
This reverts commit r209178.
This seems to be asserting in an LTO build on some internal Apple
buildbots. No upstream reproduction (and I don't have an LLVM-aware gold
built right now to reproduce it personally) but it's a small patch & the
failure's semi-plausible so I'm going to revert first while I try to
reproduce this.
llvm-svn: 209251
Undecided whether this should include a test case - SROA produces bad
dbg.value metadata describing a value for a reference that is actually
the value of the thing the reference refers to. For now, loosening the
assert lets this not assert, but it's still bogus/wrong output...
If someone wants to tell me to add a test, I'm willing/able, just
undecided. Hopefully we'll get SROA fixed soon & we can tighten up this
assertion again.
llvm-svn: 209240
This change preserves the original algorithm of generating history
for user variables, but makes it more clear.
High-level description of algorithm:
Scan all the machine basic blocks and machine instructions in the order
they are emitted to the object file. Do the following:
1) If we see a DBG_VALUE instruction, add it to the history of the
corresponding user variable. Keep track of all user variables, whose
locations are described by a register.
2) If we see a regular instruction, look at all the registers it clobbers,
and terminate the location range for all variables described by these registers.
3) At the end of the basic block, terminate location ranges for all
user variables described by some register.
Although this change shouldn't be user-visible (the contents of .debug_loc section
should be the same), it changes some internal assumptions about the set
of instructions used to track the variable locations. Watching the bots.
llvm-svn: 209225
In refactoring DwarfUnit::isUnsignedDIType I restricted it to only work
on values with signedness (unsigned or signed), asserting on anything
else (which did uncover some bugs). But it turns out that we do need to
emit constants of signless data, such as pointer constants - only null
pointer constants are known to need this so far, but it's conceivable
that there might be non-null pointer constants at some point (hardcoded
address offsets for device drivers?).
This patch just uses 'unsigned' for signless data such as pointer
constants. Arguably we could use signless representations
(DW_FORM_dataN) instead, allowing a trinary result from isUnsignedDIType
(signed, unsigned, signless), but this seems reasonable for now.
llvm-svn: 209223
This workaround (presumably for ancient GDB) doesn't appear to be
required (GDB 7.5 seems to tolerate function definition DIEs in
namespace scope just fine).
llvm-svn: 209189
Since we visit the whole list of subprograms for each CU at module
start, this is clearly true - don't test for the case, just assert it.
A few old test cases seemed to have incomplete subprogram lists, but any
attempt to reproduce them shows full subprogram lists that even include
entities that have been completely inlined and the out of line
definition removed.
llvm-svn: 209178
When I refactored this in r208636 I accidentally caused this to be added
multiple times to each abstract subprogram (not accounting for the
deduplicating effect of the InlinedSubprogramDIEs set).
This got better in r208798 when the abstract definitions got the
attribute added to them at construction time, but still had the
redundant copies introduced in r208636.
This commit removes those excess DW_AT_inlines and relies solely on the
insertion in r208798.
llvm-svn: 209166
The check in DwarfDebug::constructScopeDIE was meant to consider inlined
subroutines as any non-top-level scope that was a subprogram. Instead of
checking "not top level scope" it was checking if the /subprogram's/
scope was non-top-level.
Fix this and beef up a test case to demonstrate some of the missing
inlined_subroutines are no longer missing.
In the course of fixing this I also found that r208748 (with this fix)
found one /extra/ inlined_subroutine in concrete_out_of_line.ll due to
two inlined_subroutines having the same inlinedAt location. The previous
implementation was collapsing these into a single inlined subroutine.
I'm not sure what the original code was that created this .ll file so
I'm not sure if this actually happens in practice today. Since we
deliberately include column information to disambiguate two calls on the
same line, that may've addressed this bug in the frontend, but it's good
to know that workaround isn't necessary for this particular case
anymore.
llvm-svn: 209165
This allows us to put dynamic initializers for weak data into the same
comdat group as the data being initialized. This is necessary for MSVC
ABI compatibility. Once we have comdats for guard variables, we can use
the combination to help GlobalOpt fire more often for weak data with
guarded initialization on other platforms.
Reviewers: nlewycky
Differential Revision: http://reviews.llvm.org/D3499
llvm-svn: 209015
I'm not sure this is how it'll be going forward (I'd rather prefer the
definition to be in the main SP mapping, for various reasons) but this
helps me understand how it is today.
llvm-svn: 209009
DIBuilder maintains this invariant and the current DwarfDebug code could
end up doing weird things if it contained declarations (such as putting
the definition DIE inside a CU that contained the declaration - this
doesn't seem like a good idea, so rather than adding logic to handle
this case we'll just ban in for now & cross that bridge if we come to
it later).
llvm-svn: 209004
This reverts commit r208934.
The patch depends on aliases to GEPs with non zero offsets. That is not
supported and fairly broken.
The good news is that GlobalAlias is being redesigned and will have support
for offsets, so this patch should be a nice match for it.
llvm-svn: 208978
This commit implements two command line switches -global-merge-on-external
and -global-merge-aligned, and both of them are false by default, so this
optimization is disabled by default for all targets.
For ARM64, some back-end behaviors need to be tuned to get this optimization
further enabled.
llvm-svn: 208934
Since type units in the dwo file are handled by a debug aware tool, they
don't need to leverage the ELF comdat grouping to implement
deduplication. Avoid creating all the .group sections for these as a
space optimization.
llvm-svn: 208930
Abstract variables should never have/use locations. In this case the
data wasn't used, so no functional change intended here, just
simplification.
llvm-svn: 208820
Many old tests using prior schemas still had some brokenness here (both
indirect arrays and arrays with single bogus elements). Fixed those up
so they don't hit the new assertions.
Also reduced nesting in some places, etc.
llvm-svn: 208817
This is just unneccessary - we only create abstract definitions when
we're inlining anyway, so there's no reason to delay this to see if
we're going to inline anything.
llvm-svn: 208798
If the function has the landingpad instruction, then the
handlerdata should be emitted even if the function has
nouwnind attribute. Otherwise, following code will not
work:
void test1() noexcept {
try {
throw_exception();
} catch (...) {
log_unexpected_exception();
}
}
Since the cantunwind was incorrectly emitted and the
LSDA is not available.
llvm-svn: 208791
This was reverted in r208642 due to regressions surrounding file changes
within lexical scopes causing inlining information to be lost.
The issue was in LexicalScopes::getOrCreateInlinedScope, where I was
previously testing "isLexicalBlock" which is false for
"DILexicalBlockFile" (a scope used to represent changes in the current
file name) and assuming it was then a function (breaking out of the
inlined scope path and reaching for the parent non-inlined scopes). By
inverting the condition and testing for "isSubprogram" the correct
behavior is attained.
(also found some weirdness in Clang, see r208742 when reducing this test
case - the resulting test case doesn't apply with the Clang fix, but
I've added a more realistic test case to inline-scopes.ll which does
reproduce the issue and demonstrate the fix)
llvm-svn: 208748
This allows code to statically accept a Function or a GlobalVariable, but
not an alias. This is already a cleanup by itself IMHO, but the main
reason for it is that it gives a lot more confidence that the refactoring to fix
the design of GlobalAlias is correct. That will be a followup patch.
llvm-svn: 208716
One test case had to be updated as it still had the extra indirection
for the variable list - removing the extra indirection got it back to
passing.
llvm-svn: 208608
Filed as PR19712, LLVM fails to detect the right type of an enum
constant when a frontend does not provide an underlying type for the
enumeration type.
llvm-svn: 208502
And the winner by a nose is isUnsignedDIType, for no particular reason.
These two functions were just complements of each other and used in very
related code, so refactor callers to just use one of them.
llvm-svn: 208500
Doesn't seem a good reason to duplicate this code (it was more literally
duplicated prior to r208494, and while the dataN code /does/ actually
fire in this case, it doesn't seem necessary (and the DWARF standard
recommends using udata/sdata pervasively instead of dataN, so as to
indicate signedness of the values))
llvm-svn: 208495
This code looks to have become dead at some time in the past. I tried to
reproduce cases where LLVM would emit constants with dataN, but could
not. Upon inspection it seems the code doesn't do that anymore - the
only time a size is provided by isTypeSigned is when the type is signed,
and in those cases we use sdata. dataN is only used for unsigned types
and isTypeSigned doesn't provide a value for sizeInBits in that case.
Remove the dead cases/size plumbing.
llvm-svn: 208494
Summary:
Get rid of UserVariables set, and turn DbgValues into MapVector
to get a fixed ordering, as suggested in review for http://reviews.llvm.org/D3573.
Test Plan: llvm regression tests
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3579
llvm-svn: 207720
Breaks GDB buildbot
(http://lab.llvm.org:8011/builders/clang-x86_64-ubuntu-gdb-75/builds/14517)
GCC emits DW_AT_object_pointer /everywhere/ (declaration, abstract
definition, inlined subroutine), but it looks like GCC relies on it
being somewhere other than the declaration, at least. I'll experiment
further & can hopefully still remove it from the inlined_subroutine.
This reverts commit r207705.
llvm-svn: 207719
They just don't need to be there - they're inherited from the abstract
definition. In theory I would like them to be inherited from the
declaration, but the DWARF standard doesn't quite say that... we can
probably do it anyway but I'm less confident about that so I'll leave it
for a separate commit.
llvm-svn: 207717
Rafael Espindola