Currently we emit DeferredDeclsToEmit in reverse order. This patch changes that.
The advantages of the change are that
* The output order is a bit closer to the source order. The change to
test/CodeGenCXX/pod-member-memcpys.cpp is a good example.
* If we decide to deffer more, it will not cause as large changes in the
estcases as it would without this patch.
llvm-svn: 226751
This workaround was to provide unique call sites to ensure LLVM's inline
debug info handling would properly unique two calls to the same function
on the same line. Instead, this has now been fixed in LLVM (r226736) and
the workaround here can be removed.
Originally committed in r176895, but this isn't a straight revert due to
all the changes since then. I just searched for anything ForcedColumn*
related and removed them.
We could test this - but it didn't strike me as terribly valuable once
we're no longer adding this workaround everything just works as expected
& it's no longer a special case to test for.
llvm-svn: 226738
This attribute implies indicates that the function musttail calls
another function and returns whatever it returns. The return type of the
thunk is meaningless, as the thunk can dynamically call different
functions with different return types. So long as the callers bitcast
the thunk with the correct type, behavior is well defined.
This attribute was necessary to fix PR20944, where the indirect call
combiner noticed that the thunk returned void and replaced the results
of the indirect call instruction with undef.
Over-the-shoulder reviewed by David Majnemer.
llvm-svn: 226707
The test was fixed after a discussion with the revision author: the check
pattern was made more flexible as the "%call" part is not what we actually want
to check strictly there.
The original patch description:
===
Introduce SPIR calling conventions.
This implements Section 3.7 from the SPIR 1.2 spec:
SPIR kernels should use "spir_kernel" calling convention.
Non-kernel functions use "spir_func" calling convention. All
other calling conventions are disallowed.
The patch works only for OpenCL source. Any other uses will need
to ensure that kernels are assigned the spir_kernel calling
convention correctly.
===
llvm-svn: 226561
This implements Section 3.7 from the SPIR 1.2 spec:
SPIR kernels should use "spir_kernel" calling convention.
Non-kernel functions use "spir_func" calling convention. All
other calling conventions are disallowed.
The patch works only for OpenCL source. Any other uses will need
to ensure that kernels are assigned the spir_kernel calling
convention correctly.
llvm-svn: 226548
The code setting the debug location being removed here was accidentally
leaking a location into the call to the non-static data member's ctor
call. Without it the call had no location and could cause assertion
failures if it was inlined. Now that it has a location (and a correct
one at that) this code should hopefully be no longer needed.
It's possible of course that other parts of the debug info are also
relying on the debug locations being set here to leak to where they're
needed - so we might see the same assertions again & will have to
investigate what the dependence was/is. But the chances are good that
any of those are debug info line table quality bugs we've just not found
yet anyway - so it'll be good to flush them out.
llvm-svn: 226383
This was causing some trouble for otherwise dead code removed in r225085
(reverted in r225361). The location being set for function arguments was
leaking out to the call which wasn't setting its own location (so a
quality bug turned into a crasher with r225085). Fix this so r225085 can
be recommitted.
llvm-svn: 226382
This produces comdats for vtables, typeinfo, typeinfo names, and vtts.
When combined with llvm not producing implicit comdats, not doing this would
cause code bloat on ELF and link errors on COFF.
llvm-svn: 226227
object from the pass that provides access to it.
We should probably refactor the createTLI code here in Clang in light of
the new structure, but I wanted this patch to be a minimal one that just
patches the behavior back together.
llvm-svn: 226158
Sema calls HandleVTable() with a bool parameter which is then threaded through
three layers. The only effect of this bool is an early return at the last
layer.
Instead, remove this parameter and call HandleVTable() only if the bool is
true. No intended behavior change.
llvm-svn: 226096
Summary:
This fixes MultiSource/Applications/lemon on big-endian N32 by correcting the
handling of the argument to wait(). glibc defines it as a transparent union of
void* and int*. Such unions are passed according to the rules of the first
member so the argument must be passed as if it were a void* (sign extended from
i32 to i64) and not as a union (shifted to the upper bits of an i64).
wait() already behaves correctly on big-endian O32 and N64 since the union is
already the same size as an argument slot.
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D6963
llvm-svn: 225981
Sorry for the noise, I managed to miss a bunch of recent regressions of
include orderings here. This should actually sort all the includes for
Clang. Again, no functionality changed, this is just a mechanical
cleanup that I try to run periodically to keep the #include lines as
regular as possible across the project.
llvm-svn: 225979
Several pieces of code were relying on implicit debug location setting
which usually lead to incorrect line information anyway. So I've fixed
those (in r225955 and r225845) separately which should pave the way for
this commit to be cleanly reapplied.
The reason these implicit dependencies resulted in crashes with this
patch is that the debug location would no longer implicitly leak from
one place to another, but be set back to invalid. Once a call with
no/invalid location was emitted, if that call was ever inlined it could
produce invalid debugloc chains and assert during LLVM's codegen.
There may be further cases of such bugs in this patch - they're hard to
flush out with regression testing, so I'll keep an eye out for reports
and investigate/fix them ASAP if they come up.
Original commit message:
Reapply "DebugInfo: Generalize debug info location handling"
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225956
Without setting the CurEHLocation these cleanups would be attributed to
whatever the last active debug line location was (the 'fn' call in the
included test cases). By setting CurEHLocation correctly the line
information is improved/corrected.
This quality bug turned into a crasher with r225000 when, instead of
allowing the last location to persist, it would be zero'd out. This
could lead to a function call (such as the dtor) being made without a
debug location - if that call was subsequently inlined (and the caller
and callee had debug info, just not the call instruction) the inliner
would violate important constraints about the debug location chains by
not updating the inlined instructions to chain up to the callee
locations.
So, by fixing this bug, I am addressing the assertion failures
introduced by r225000 and should be able to recommit that patch with
impunity...
llvm-svn: 225955
A pass that adds random noops to X86 binaries to introduce diversity with the goal of increasing security against most return-oriented programming attacks.
Command line options:
-noop-insertion // Enable noop insertion.
-noop-insertion-percentage=X // X% of assembly instructions will have a noop prepended (default: 50%, requires -noop-insertion)
-max-noops-per-instruction=X // Randomly generate X noops per instruction. ie. roll the dice X times with probability set above (default: 1). This doesn't guarantee X noop instructions.
In addition, the following 'quick switch' in clang enables basic diversity using default settings (currently: noop insertion and schedule randomization; it is intended to be extended in the future).
-fdiversify
This is the clang part of the patch.
llvm part: D3392
http://reviews.llvm.org/D3393
Patch by Stephen Crane (@rinon)
llvm-svn: 225910
This was previously piggybacking on whatever happened to be the last
location set on CGDebugInfo/DIBuilder, which was wrong (it was often the
current location, such as the 'fn()' call site, not the end of the
block). With my improvements to set/unset the location in a scoped
manner (r225000) this went from a bad quality situation, to a crash.
Fixing this goes part-way to unblocking the recommit of r225000.
It's likely that any call to CodeGenFunction::StartFunction without the
CurEHLocation set represents a similar bug or risk of a bug. Perhaps
there are some callers that know they won't generate EH cleanups, but
I'm not sure.
I considered a generic catch-fix in StartFunction (just fallback to the
GlobalDecl's location) but that seemed like it'd mask bugs where the EH
location shouldn't be the same as the decl's location (& indeed by not
using that stop-gap I found this bug). We'll see how long I can hold out
on the generic catch-all. I might eventually be able to add an assertion
in.
llvm-svn: 225845
Summary:
The Mips ABI's treat pointers in the same way as integers. They are
sign-extended to 32-bit for O32, and 64-bit for N32/N64. This doesn't matter
for O32 and N64 where pointers are already the correct width but it does matter
for big-endian N32, where pointers are 32-bit and need promoting.
The caller side is already passing pointers correctly. This patch corrects the
callee.
Reviewers: vmedic, atanasyan
Reviewed By: atanasyan
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D6812
llvm-svn: 225782
Introduce the following -fsanitize-recover flags:
- -fsanitize-recover=<list>: Enable recovery for selected checks or
group of checks. It is forbidden to explicitly list unrecoverable
sanitizers here (that is, "address", "unreachable", "return").
- -fno-sanitize-recover=<list>: Disable recovery for selected checks or
group of checks.
- -f(no-)?sanitize-recover is now a synonym for
-f(no-)?sanitize-recover=undefined,integer and will soon be deprecated.
These flags are parsed left to right, and mask of "recoverable"
sanitizer is updated accordingly, much like what we do for -fsanitize= flags.
-fsanitize= and -fsanitize-recover= flag families are independent.
CodeGen change: If there is a single UBSan handler function, responsible
for implementing multiple checks, which have different recoverable setting,
then we emit two handler calls instead of one:
the first one for the set of "unrecoverable" checks, another one - for
set of "recoverable" checks. If all checks implemented by a handler have the
same recoverability setting, then the generated code will be the same.
llvm-svn: 225719
The llvm IR until recently had no support for comdats. This was a problem when
targeting C++ on ELF/COFF as just using weak linkage would cause quite a bit of
dead bits to remain on the executable (unless -ffunction-sections,
-fdata-sections and --gc-sections were used).
To fix the problem, llvm's codegen will just assume that any weak or linkonce
that is not in an explicit comdat should be output in one with the same name as
the global.
This unfortunately breaks cases like pr19848 where a weak symbol is not
xpected to be part of any comdat.
Now that we have explicit comdats in the IR, we can finally get both cases
right.
This first patch just makes clang give explicit comdats to GlobalValues where
t is allowed to.
A followup patch to llvm will then stop implicitly producing comdats.
llvm-svn: 225705
Rafael Espindola