Commit Graph

90601 Commits

Author SHA1 Message Date
Nadav Rotem e7b6a8aa8c Add the Haswell machine model.
llvm-svn: 178301
2013-03-28 22:34:46 +00:00
Nadav Rotem a20ec3164e Remove the unused port from the SandyBridge machine model
llvm-svn: 178300
2013-03-28 22:32:41 +00:00
Michael Liao c93fe7f8b2 Add ADX CPUID detection
llvm-svn: 178299
2013-03-28 22:29:53 +00:00
Eric Christopher 6c75232cf0 These two are default in the constructor for MCAsmInfo.
llvm-svn: 178293
2013-03-28 21:37:18 +00:00
Timur Iskhodzhanov a2fd5fdd7a Make Win32 put the SRet address into EAX, fixes PR15556
llvm-svn: 178291
2013-03-28 21:30:04 +00:00
Hal Finkel fd53ddd71c Specify CPUs on the PPC bswap-load-store test
Otherwise, the CHECK-NOT's might trigger depending on the host's CPU.

llvm-svn: 178287
2013-03-28 20:35:18 +00:00
Hal Finkel 22e41c411e Only enable 64-bit bswap DAG combines for PPC64
Compiling in 32-bit mode on a P7 would assert after 64-bit DAG combines were
added for bswap with load/store. This is because these combines are really only
valid in 64-bit mode, regardless of the CPU (and this was not being checked).

llvm-svn: 178286
2013-03-28 20:23:46 +00:00
Michael Gottesman 49f9885a2a Non optimizable objc_retainBlock calls are not forwarding.
Since we handle optimizable objc_retainBlocks through strength reduction
in OptimizableIndividualCalls, we know that all code after that point
will only see non-optimizable objc_retainBlock calls. IsForwarding is
only called by functions after that point, so it is ok to just classify
objc_retainBlock as non-forwarding.

<rdar://problem/13249661>.

llvm-svn: 178285
2013-03-28 20:11:30 +00:00
Michael Gottesman 158fdf699e [ObjCARC] Strength reduce objc_retainBlock -> objc_retain if the objc_retainBlock is optimizable.
If an objc_retainBlock has the copy_on_escape metadata attached to it
AND if the block pointer argument only escapes down the stack, we are
allowed to strength reduce the objc_retainBlock to to an objc_retain and
thus optimize it.

Current there is logic in the ARC data flow analysis to handle
this case which is complicated and involved making distinctions in
between objc_retainBlock and objc_retain in certain places and
considering them the same in others.

This patch simplifies said code by:

1. Performing the strength reduction in the initial ARC peephole
analysis (ObjCARCOpts::OptimizeIndividualCalls).

2. Changes the ARC dataflow analysis (which runs after the peephole
analysis) to consider all objc_retainBlock calls to not be optimizable
(since if the call was optimizable, we would have strength reduced it
already).

This patch leaves in the infrastructure in the ARC dataflow analysis to
handle this case, which due to 2 will just be dead code. I am doing this
on purpose to separate the removal of the old code from the testing of
the new code.

<rdar://problem/13249661>.

llvm-svn: 178284
2013-03-28 20:11:19 +00:00
Jyotsna Verma a46059b74d Hexagon: Replace switch-case in isDotNewInst with TSFlags.
llvm-svn: 178281
2013-03-28 19:44:04 +00:00
Hal Finkel 93492fa696 Fix bad indentation in r178276
Thanks to Bill Schmidt for pointing this out!

llvm-svn: 178280
2013-03-28 19:43:12 +00:00
Jyotsna Verma 27c06f3322 Hexagon: Enable SupportDebugInfomation and DwarfInSection flags.
llvm-svn: 178279
2013-03-28 19:34:49 +00:00
Akira Hatanaka 19468cafad Remove -O3.
llvm-svn: 178278
2013-03-28 19:34:14 +00:00
Bill Schmidt 74b2e72ab3 Use direct types in most PowerPC Altivec instructions and patterns.
This follows up Ulrich Weigand's work in PPCInstrInfo.td and
PPCInstr64Bit.td by doing the corresponding work for most of the
Altivec patterns.  I have not been able to do anything for the
following classes of instructions:

(1) Vector logicals.  These don't have corresponding intrinsics and
don't have a single obvious vector type.  So far as I can tell I need
to leave these as VRRC.  Affected instructions are:  VAND, VANDC,
VNOR, VOR, VXOR, V_SET0.

(2) Instructions that make use of vector shuffle.  The selection code
promotes all shuffles to v16i8, so any pattern that matches on a
shuffle is constrained.  I haven't found any way to make the patterns
match on their natural types, so I plan to leave these as VRRC.
Affected instructions are:  VMRG*, VSPLTB, VSPLTH, VSPLTW, VPKUHUM,
VPKUWUM.

No change in behavior is anticipated.

llvm-svn: 178277
2013-03-28 19:27:24 +00:00
Hal Finkel 31d2956510 Add the PPC64 ldbrx/stdbrx instructions
These are 64-bit load/store with byte-swap, and available on the P7 and the A2.
Like the similar instructions for 16- and 32-bit words, these are matched in the
target DAG-combine phase against load/store-bswap pairs.

llvm-svn: 178276
2013-03-28 19:25:55 +00:00
Gordon Keiser 772cf466da Fix issue with disassembler decoding CBZ/CBNZ immediates as negatives when the upper bit is set.
They should always be zero-extended, not sign extended.  Added test case.

llvm-svn: 178275
2013-03-28 19:22:28 +00:00
Gordon Keiser fb1ce5fa25 Testing commit access to llvm. Remove two lines of whitespace from the Thumb README.
llvm-svn: 178256
2013-03-28 18:26:15 +00:00
Thomas Schwinge b1322d5691 Correct spelling of Git.
llvm-svn: 178254
2013-03-28 18:06:20 +00:00
Rafael Espindola ddbf4f47dc Move test since it depends on the X86 backend.
llvm-svn: 178249
2013-03-28 17:01:28 +00:00
Jyotsna Verma 93e740485f Hexagon: Use multiclass for gp-relative instructions.
Remove noV4T gp-relative instructions.

llvm-svn: 178246
2013-03-28 16:25:57 +00:00
Howard Hinnant 24d7f8c342 Seciton 24.2.2 of the C++ standard, [iterator.iterators], Table 106
requires that the return type of *r for all iterators r be reference,
where reference is defined in [iterator.requirements.general]/p11 as
iterator_traits<X>::reference, and X is the type of r.

But in CFG.h, the dereference operator of PredIterator and SuccIterator
return pointer, not reference.

Furthermore the nested type reference is value_type&, which is not the
type returned from operator*().

This patch simply makes the iterator::reference type value_type*, which
is what the operator*() returns, and then re-lables the return type as
reference.

From a functionality point of view, the only difference is that the
nested reference type is now value_type* instead of value_type&.

llvm-svn: 178240
2013-03-28 15:47:50 +00:00
Tim Northover 08bb3ce383 AArch64: implement GICv3 system registers
llvm-svn: 178236
2013-03-28 14:30:46 +00:00
Hal Finkel a4d074863a Add the PPC64 popcntd instruction
PPC ISA 2.06 (P7, A2, etc.) has a popcntd instruction. Add this instruction and
tell TTI about it so that popcount-loop recognition will know about it.

llvm-svn: 178233
2013-03-28 13:29:47 +00:00
Kostya Serebryany 463aa81418 [tsan] make sure memset/memcpy/memmove are not inlined in tsan mode
llvm-svn: 178230
2013-03-28 11:21:13 +00:00
Michael Gottesman f23bb4e558 Revert "Updated ELF relocation test for .eh_frame section"
This reverts commit c8d65364223a04b179958a50a4bf0f89b21dd7d2.

This broke a bunch of the buildbots.

llvm-svn: 178222
2013-03-28 05:14:26 +00:00
Jyotsna Verma 8542abd762 Disable JIT/MCJIT tests in unittests/ExecutionEngine for the targets that don't support JIT.
llvm-svn: 178221
2013-03-28 03:38:29 +00:00
Hal Finkel 035b4825ce Cleanup PPC CR-spill kill flags and 32- vs. 64-bit instructions
There were a few places where kill flags were not being set correctly, and
where 32-bit instruction variants were being used with 64-bit registers. After
r178180, this code was being triggered causing llc to assert.

llvm-svn: 178220
2013-03-28 03:38:16 +00:00
Hal Finkel 25aab01058 Fix typo in PPCInstr64Bit
llvm-svn: 178219
2013-03-28 03:38:08 +00:00
David Blaikie 5692e72f30 Revert "Adding DIImportedModules to DIScopes."
This reverts commit 342d92c7a0adeabc9ab00f3f0d88d739fe7da4c7.

Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.

llvm-svn: 178215
2013-03-28 02:44:59 +00:00
Akira Hatanaka 99866dd535 Check if Type is a vector before calling function Type::getVectorNumElements.
llvm-svn: 178208
2013-03-28 01:28:02 +00:00
Preston Gurd d6be4bf87f This patch follows is a follow up to r178171, which uses the register
form of call in preference to memory indirect on Atom.

In this case, the patch applies the optimization to the code for reloading
spilled registers.

The patch also includes changes to sibcall.ll and movgs.ll, which were
failing on the Atom buildbot after the first patch was applied.

This patch by Sriram Murali.

llvm-svn: 178193
2013-03-27 23:16:18 +00:00
Jack Carter ccc266559f Updated ELF relocation test for .eh_frame section
Made sure we were looking a correct section
Added Mips32/64 as an extra check
Updated llvm-objdump to generate symbolic info for Mips relocations

llvm-svn: 178190
2013-03-27 22:58:49 +00:00
Chad Rosier 1530ba5e73 [ms-inline asm] Add support of imm displacement before bracketed memory
expression.  Specifically, this syntax:

 ImmDisp [ BaseReg + Scale*IndexReg + Disp ] 

We don't currently support:

 ImmDisp [ Symbol ]

rdar://13518671

llvm-svn: 178186
2013-03-27 21:49:56 +00:00
Hal Finkel 37714b8a48 Resynchronize isLoadFromStackSlot with LoadRegFromStackSlot (and stores) in PPCInstrInfo
These functions should have the same list of load/store instructions. Now that
all load/store forms have been normalized (to single instructions or pseudos)
they can be resynchronized.

Found by inspection, although hopefully this will improve optimization.  I've
also added some comments.

llvm-svn: 178180
2013-03-27 21:21:15 +00:00
Jack Carter d224bc4f25 test file name change to correct typo
llvm-svn: 178174
2013-03-27 20:07:48 +00:00
Preston Gurd 663e6f9558 For the current Atom processor, the fastest way to handle a call
indirect through a memory address is to load the memory address into
a register and then call indirect through the register.

This patch implements this improvement by modifying SelectionDAG to
force a function address which is a memory reference to be loaded
into a virtual register.

Patch by Sriram Murali.

llvm-svn: 178171
2013-03-27 19:14:02 +00:00
Hal Finkel 1996f3d87f Fix typo (common to both X86 and PPC)
Thanks to Bill Schmidt for pointing this out during code review!

llvm-svn: 178170
2013-03-27 19:10:42 +00:00
Hal Finkel 5791f51449 Remove more dead LR-as-GPR PPC code
I had removed similar code a few days ago, but somehow missed this.

llvm-svn: 178169
2013-03-27 19:10:40 +00:00
Dan Gohman 38a723830c Avoid undefined behavior from passing a std::vector's own contents
in as an argument to push_back.

llvm-svn: 178166
2013-03-27 18:44:56 +00:00
Hal Finkel f1af79ab45 Remove "gpr0 allocation" from the PPC README TODO list
As Chris pointed out, post r178123, this is now done!

llvm-svn: 178165
2013-03-27 18:39:52 +00:00
Chad Rosier 7ce810cb84 Don't try to generate crash diagnostics if we had an I/O failure. It's very
likely the crash diagnostics generation will fail as well.
Part of rdar://13296693

llvm-svn: 178163
2013-03-27 18:30:00 +00:00
Chad Rosier 583b4d3961 Add a boolean parameter to the llvm::report_fatal_error() function to indicated
if crash diagnostics should be generated.  By default this is enabled.
Part of rdar://13296693

llvm-svn: 178161
2013-03-27 18:27:54 +00:00
Bill Wendling fa2287825d Specutively revert r178130.
This may be causing a failure on some buildbots:

Referencing function in another module!
  tail call fastcc void @_ZL11EvaluateOpstPtRj(i16 zeroext %17, i16* %Vals, i32* %NumVals), !dbg !219
Referencing function in another module!
  tail call fastcc void @_ZL11EvaluateOpstPtRj(i16 zeroext %19, i16* %Vals, i32* %NumVals), !dbg !221
Broken module found, compilation aborted!
Stack dump:
0.    Running pass 'Function Pass Manager' on module 'ld-temp.o'.
1.    Running pass 'Module Verifier' on function '@_ZL11EvaluateOpstPtRj'
clang: error: unable to execute command: Illegal instruction: 4
clang: error: linker command failed due to signal (use -v to see invocation)

<rdar://problem/13516485>

llvm-svn: 178156
2013-03-27 17:54:41 +00:00
David Blaikie 986d7049cd Fix comment
llvm-svn: 178155
2013-03-27 17:50:12 +00:00
Rafael Espindola 0afce43be1 Cleanup the simplify_type implementation.
As far as simplify_type is concerned, there are 3 kinds of smart pointers:

* const correct: A 'const MyPtr<int> &' produces a 'const int*'. A
'MyPtr<int> &' produces a 'int *'.
* always const: Even a 'MyPtr<int> &' produces a 'const int*'.
* no const: Even a 'const MyPtr<int> &' produces a 'int*'.

This patch then does the following:

* Removes the unused specializations. Since they are unused, it is hard
to know which kind should be implemented.
* Make sure we don't drop const.
* Fix the default forwarding so that const correct pointer only need
one specialization.
* Simplifies the existing specializations.

llvm-svn: 178147
2013-03-27 16:43:11 +00:00
Christian Konig 08f5929942 R600/SI: add SETO/SETUO patterns
6 more piglit tests.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 178145
2013-03-27 15:27:31 +00:00
Benjamin Kramer b6bf15cba7 Silence warning about mixing || in &&, fix up 80-cols.
llvm-svn: 178144
2013-03-27 15:03:14 +00:00
Hal Finkel 687143557d Print PPC ZERO as 0 (not r0) even on Darwin
It seems that the Darwin PPC assembler requires r0 to be written as 0 when it
means 0 (at least in lwarx/stwcx.). Fixes PR15605.

llvm-svn: 178142
2013-03-27 13:20:52 +00:00
Tim Northover d3490dc06a Switch to LLVM support function abs64 to keep VS2008 happy.
llvm-svn: 178141
2013-03-27 13:15:08 +00:00
Evgeniy Stepanov 8dcc970760 Disable ASan/MSan symbolization of reports in tests.
It was using an instrumented symbolizer binary, which is a potential fork bomb.

llvm-svn: 178139
2013-03-27 13:11:12 +00:00