skipping indirectly recursive inline chains.
To do this, we implicitly build an inline stack for each callsite and
check prior to inlining that doing so would not form a cycle. This uses
the exact same technique and even shares some code with the legacy PM
inliner.
This solution remains deeply unsatisfying to me because it means we
cannot actually iterate the inliner externally. Doing so would not be
able to easily detect and avoid such cycles. Some day I would very much
like to have a solution that works without this internal state to detect
cycles, but this is not that day.
llvm-svn: 290590
Nothing really interesting here, but I had to improve the test to use
variables rather than hard coding value names as we happen to end up
with different value names in the new PM.
llvm-svn: 290589
We currently ignore the `allocsize` attribute on functions calls with
the `nobuiltin` attribute when trying to lower `@llvm.objectsize`. We
shouldn't care about `nobuiltin` here: `allocsize` is explicitly added
by the user, not inferred based on a function's symbol.
llvm-svn: 290588
PMULDQ/PMULUDQ vXi64 instructions only use the even numbered v2Xi32 input elements which SimplifyDemandedVectorElts should try and use.
This builds on r290554 which added supported for 128 and 256-bit.
llvm-svn: 290582
This mostly involved converting from grep to FileCheck and tidying up
the IR used.
In one case (invoke_test-3.ll) the test had become completely pointless
as we use 'resume' rather than 'unwind' now, and even then it did not
occur at the end of the line.
llvm-svn: 290570
An earlier commit added support for unmasked scalar operations. At that time isel wouldn't generate an optimal sequence for masked operations, but that has now been fixed.
llvm-svn: 290566
inside of `InlineFunction`. Prior to this, call instructions are
specifically being rewritten and replaced within the inlined region,
invalidating some of the call sites.
Several of these regions are using the same technique to walk the
inlined region so this seems clearly safe up to this point.
I've also added a short circuit to the scan for call sites based on what
other code is doing.
With this, the most common crash I've found in the new inliner code is
fixed. I've turned it on for another test case that covers this
scenario.
I'll make my way through most of the other inliner test cases
just to get some easy coverage next.
llvm-svn: 290562
removing fully-dead comdats without removing dead entries in comdats
with live members.
This factors the core logic out of the current inliner's internals to
a reusable utility and leverages that in both places. The factored out
code should also be (minorly) more efficient in cases where we have very
few dead functions or dead comdats to consider.
I've added a test case to cover this behavior of the always inliner.
This is the last significant bug in the new PM's always inliner I've
found (so far).
llvm-svn: 290557
PMULDQ/PMULUDQ vXi64 instructions only use the even numbered v2Xi32 input elements which SimplifyDemandedVectorElts should try and use.
Differential Revision: https://reviews.llvm.org/D28119
llvm-svn: 290554
The current GVN algorithm folds unconditional branches to, it claims,
expose more PRE oportunities. The folding, if really needed,
(which is not sure, as it's not really proved it improves analysis)
can be done by an earlier cleanup pass instead of GVN itself.
Ack'ed/SGTM'd by Daniel Berlin.
Differential Revision: https://reviews.llvm.org/D28117
llvm-svn: 290546
systematically and document in the test what all is going on.
This replaces the PR-named test that was the only coverage for GlobalDCE
and comdats previously. I wrote this because I wasn't certain how
comdat DCE was supposed to work and wanted to step through what
GlobalDCE did to fully understand it. After talking to folks and reading
the code and really staring at things it all makes sense but it seemed
good to help write down some of this in a more explicit and fully
covering test case.
For example, it seemed like a bug that GlobalDCE didn't consider comdat
participation of ifuncs. Specifically it seemed like an accident because
testing didn't really cover that case. But in fact, ifuncs specifically
cannot participate in a comdat despite having that API. The new test
case covers this and explicitly documents that DCE gets to fire here
even though there are comdats involved.
Also, we didn't have any positive tests for the challenging cases such
as usage cycles between comdat participants that might make them seem
alive except that there is no external edge into the cycle.
llvm-svn: 290537
Summary:
I only do this for unmasked cases for now because isel is failing to fold the mask. I'll try to fix that soon.
I'll do the same thing for packed add/sub/mul/div in a future patch.
Reviewers: delena, RKSimon, zvi, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27879
llvm-svn: 290535
Summary:
This patch adds support for converting the masked vpermv intrinsics into shufflevector instructions if the indices are constants.
We also need to wrap a select instruction around the shuffle to take care of the masking part. InstCombine will take care of optimizing the select if the mask is constant so I didn't bother checking for that.
Reviewers: zvi, delena, spatel, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27825
llvm-svn: 290530
whether functions are removed, and fix the new PM's always inliner to
actually pass this test.
Without this, the new PM's always inliner leaves all the functions
kicking around which won't work out very well given the semantics of
always inline.
Doing this really highlights how frustrating the current alwaysinline
semantic contract is though -- why can we put it on *external*
functions, etc?
Also I've added a number of tricky and interesting test cases for
removing functions with the always inliner. There is one remaining case
not handled -- fully removing comdats -- and I've left a FIXME about
this.
llvm-svn: 290457
The pass creates some state which expects to be cleaned up by
a later instance of the same pass. opt-bisect happens to expose
this not ideal design because calling skipLoop() will result in
this state not being cleaned up at times and an assertion firing
in `doFinalization()`. Chandler tells me the new pass manager will
give us options to avoid these design traps, but until it's not ready,
we need a workaround for the current pass infrastructure. Fix provided
by Andy Kaylor, see the review for a complete discussion.
Differential Revision: https://reviews.llvm.org/D25848
llvm-svn: 290427
Use a dummy private function with inline asm calls instead of module
level asm blocks for CFI jumptables.
The main advantage is that now jumptable codegen can be affected by
the function attributes (like target_cpu on ARM). Module level asm
gets the default subtarget based on the target triple, which is often
not good enough.
This change also uses asm constraints/arguments to reference
jumptable targets and aliases directly. We no longer do asm name
mangling in an IR pass.
Differential Revision: https://reviews.llvm.org/D28012
llvm-svn: 290384
The code have been developed by Daniel Berlin over the years, and
the new implementation goal is that of addressing shortcomings of
the current GVN infrastructure, i.e. long compile time for large
testcases, lack of phi predication, no load/store value numbering
etc...
The current code just implements the "core" GVN algorithm, although
other pieces (load coercion, phi handling, predicate system) are
already implemented in a branch out of tree. Once the core is stable,
we'll start adding pieces on top of the base framework.
The test currently living in test/Transform/NewGVN are a copy
of the ones in GVN, with proper `XFAIL` (missing features in NewGVN).
A flag will be added in a future commit to enable NewGVN, so that
interested parties can exercise this code easily.
Differential Revision: https://reviews.llvm.org/D26224
llvm-svn: 290346
This patch renumbers the metadata nodes in debug info testcases after
https://reviews.llvm.org/D26769. This is a separate patch because it
causes so much churn. This was implemented with a python script that
pipes the testcases through llvm-as - | llvm-dis - and then goes
through the original and new output side-by side to insert all
comments at a close-enough location.
Differential Revision: https://reviews.llvm.org/D27765
llvm-svn: 290292
In r267672, where the loop distribution pragma was introduced, I tried
it hard to keep the old behavior for opt: when opt is invoked
with -loop-distribute, it should distribute the loop (it's off by
default when ran via the optimization pipeline).
As MichaelZ has discovered this has the unintended consequence of
breaking a very common developer work-flow to reproduce compilations
using opt: First you print the pass pipeline of clang
with -debug-pass=Arguments and then invoking opt with the returned
arguments.
clang -debug-pass will include -loop-distribute but the pass is invoked
with default=off so nothing happens unless the loop carries the pragma.
While through opt (default=on) we will try to distribute all loops.
This changes opt's default to off as well to match clang. The tests are
modified to explicitly enable the transformation.
llvm-svn: 290235
We're currently doing nearly the same thing for @llvm.objectsize in
three different places: two of them are missing checks for overflow,
and one of them could subtly break if InstCombine gets much smarter
about removing alloc sites. Seems like a good idea to not do that.
llvm-svn: 290214
This doesn't implement *every* feature of the existing inliner, but
tries to implement the most important ones for building a functional
optimization pipeline and beginning to sort out bugs, regressions, and
other problems.
Notable, but intentional omissions:
- No alloca merging support. Why? Because it isn't clear we want to do
this at all. Active discussion and investigation is going on to remove
it, so for simplicity I omitted it.
- No support for trying to iterate on "internally" devirtualized calls.
Why? Because it adds what I suspect is inappropriate coupling for
little or no benefit. We will have an outer iteration system that
tracks devirtualization including that from function passes and
iterates already. We should improve that rather than approximate it
here.
- Optimization remarks. Why? Purely to make the patch smaller, no other
reason at all.
The last one I'll probably work on almost immediately. But I wanted to
skip it in the initial patch to try to focus the change as much as
possible as there is already a lot of code moving around and both of
these *could* be skipped without really disrupting the core logic.
A summary of the different things happening here:
1) Adding the usual new PM class and rigging.
2) Fixing minor underlying assumptions in the inline cost analysis or
inline logic that don't generally hold in the new PM world.
3) Adding the core pass logic which is in essence a loop over the calls
in the nodes in the call graph. This is a bit duplicated from the old
inliner, but only a handful of lines could realistically be shared.
(I tried at first, and it really didn't help anything.) All told,
this is only about 100 lines of code, and most of that is the
mechanics of wiring up analyses from the new PM world.
4) Updating the LazyCallGraph (in the new PM) based on the *newly
inlined* calls and references. This is very minimal because we cannot
form cycles.
5) When inlining removes the last use of a function, eagerly nuking the
body of the function so that any "one use remaining" inline cost
heuristics are immediately refined, and queuing these functions to be
completely deleted once inlining is complete and the call graph
updated to reflect that they have become dead.
6) After all the inlining for a particular function, updating the
LazyCallGraph and the CGSCC pass manager to reflect the
function-local simplifications that are done immediately and
internally by the inline utilties. These are the exact same
fundamental set of CG updates done by arbitrary function passes.
7) Adding a bunch of test cases to specifically target CGSCC and other
subtle aspects in the new PM world.
Many thanks to the careful review from Easwaran and Sanjoy and others!
Differential Revision: https://reviews.llvm.org/D24226
llvm-svn: 290161
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades and a change
to the Bitcode record for DIGlobalVariable, that makes upgrading the
old format unambiguous also for variables without DIExpressions.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 290153
Background/motivation - I was circling back around to:
https://llvm.org/bugs/show_bug.cgi?id=28296
I made a simple patch for that and noticed some regressions, so added test cases for
those with rL281055, and this is hopefully the minimal fix for just those cases.
But as you can see from the surrounding untouched folds, we are missing commuted patterns
all over the place, and of course there are no regression tests to cover any of those cases.
We could sprinkle "m_c_" dust all over this file and catch most of the missing folds, but
then we still wouldn't have test coverage, and we'd still miss some fraction of commuted
patterns because they require adjustments to the match order.
I'm aware of the concern about the potential compile-time performance impact of adding
matches like this (currently being discussed on llvm-dev), but I don't think there's any
evidence yet to suggest that handling commutative pattern matching more thoroughly is not
a worthwhile goal of InstCombine.
Differential Revision: https://reviews.llvm.org/D24419
llvm-svn: 290067
This is recommit of r287553 after fixing the invalid loop info after eliminating an empty block and unit test failures in AVR and WebAssembly :
Summary: Merging an empty case block into the header block of switch could cause ISel to add COPY instructions in the header of switch, instead of the case block, if the case block is used as an incoming block of a PHI. This could potentially increase dynamic instructions, especially when the switch is in a loop. I added a test case which was reduced from the benchmark I was targetting.
Reviewers: t.p.northover, mcrosier, manmanren, wmi, joerg, davidxl
Subscribers: joerg, qcolombet, danielcdh, hfinkel, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D22696
llvm-svn: 289988
This reverts commit 289920 (again).
I forgot to implement a Bitcode upgrade for the case where a DIGlobalVariable
has not DIExpression. Unfortunately it is not possible to safely upgrade
these variables without adding a flag to the bitcode record indicating which
version they are.
My plan of record is to roll the planned follow-up patch that adds a
unit: field to DIGlobalVariable into this patch before recomitting.
This way we only need one Bitcode upgrade for both changes (with a
version flag in the bitcode record to safely distinguish the record
formats).
Sorry for the churn!
llvm-svn: 289982
This patch reapplies r289863. The original patch was reverted because it
exposed a bug causing the loop vectorizer to crash in the Python runtime on
PPC. The underlying issue was fixed with r289958.
llvm-svn: 289975
`dropUnknownNonDebugMetadata` takes a list of "known" metadata IDs. The
only reason it worked at all is that `getMetadataID` returns something
unrelated -- it returns the subclass ID of the receiver (which is used
in `dyn_cast` etc.). That does not numerically match
`LLVMContext::MD_invariant_group` and ends up dropping `invariant_group`
along with every other metadata that does not numerically match
`LLVMContext::MD_invariant_group`.
llvm-svn: 289973
Chandler Carruth