`.debug_frame` is not emitted on AIX, so this patch disables the test.
Reviewed By: shchenz, jsji
Differential Revision: https://reviews.llvm.org/D112593
The tests that exercise the 'release' mode, where the model is AOT-ed,
check the output has certain properties, to validate that, indeed, a
different policy from the default one was exercised. For determinism, we
can't reliably check that output for an arbitrary learned policy, since
it could be that policy happens to mimic the default one in that
particular case.
This patch adds a requirement that those tests run only when the model
is autogenerated (e.g. on build bots).
Differential Revision: https://reviews.llvm.org/D111747
This check should ensure we don't reproduce the problem fixed by
02df443d28
More accurately, it checks every llvm::Any::TypeId symbol in libLLVM-x.so and
make sure they have weak linkage and are not local to the library, which would
lead to duplicate definition if another weak version of the symbol is defined in
another linked library.
Differential Revision: https://reviews.llvm.org/D109252
This is a similarity visualization tool that accepts a Module and
passes it to the IRSimilarityIdentifier. The resulting SimilarityGroups
are output in a JSON file.
Tests are found in test/tools/llvm-sim and check for the file not found,
a bad module, and that the JSON is created correctly.
Reviewers: paquette, jroelofs, MaskRay
Recommit of: 15645d044b to fix linking
errors and GN build system.
Differential Revision: https://reviews.llvm.org/D86974
Since Xcode 13, ld64 requires linking libSystem for all the executable.
Fix the tests that needs to run ld64 by linking libSystem from sysroot.
rdar://77332728
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D104332
This is a similarity visualization tool that accepts a Module and
passes it to the IRSimilarityIdentifier. The resulting SimilarityGroups
are output in a JSON file.
Tests are found in test/tools/llvm-sim and check for the file not found,
a bad module, and that the JSON is created correctly.
Reviewers: paquette, jroelofs, MaskRay
Recommit of: 15645d044b to fix linking
errors.
Differential Revision: https://reviews.llvm.org/D86974
This is relanding commit d1d36f7ad2 .
This patch additionally addresses failures found in buildbots due to unstable build ordering & post review comments.
This patch introduces a new tool, llvm-tapi-diff, that compares and returns the diff of two TBD files.
Reviewed By: ributzka, JDevlieghere
Differential Revision: https://reviews.llvm.org/D101835
This is relanding commit d1d36f7ad2 .
This patch additionally addresses failures found in buildbots & post review comments.
This patch introduces a new tool, llvm-tapi-diff, that compares and returns the diff of two TBD files.
Reviewed By: ributzka, JDevlieghere
Differential Revision: https://reviews.llvm.org/D101835
As a follow on to D96282, since bug point passes is built as a module the proper file extension to use is LLVM_PLUGIN_EXT, rather than SHLIBEXT. Using SHLIBEXT causes the tests to load a non-existent file on AIX. We also adjust the PluginsTest unittest to use LLVM_PLUGIN_EXT for similar reasons.
This change should hopefully make little difference to other platforms, since generally `SHLIBEXT=LTDL_SHLIB_EXT=CMAKE_SHARED_LIBRARY_SUFFIX` and `LLVM_PLUGIN_EXT=CMAKE_SHARED_LIBRARY_SUFFIX` on every platform except AIX.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D101412
This primarily parses a different set of options and invokes the same
resource compiler as llvm-rc normally. Additionally, it can convert
directly to an object file (which in MSVC style setups is done with the
separate cvtres tool, or by the linker).
(GNU windres also supports other conversions; from coff object file back
to .res, and from .res or object file back to .rc form; that's not yet
implemented.)
The other bigger complication lies in being able to imply or pass the
intended target triple, to let clang find the corresponding mingw sysroot
for finding include files, and for specifying the default output object
machine format.
It can be implied from the tool triple prefix, like
`<triple>-[llvm-]windres` or picked up from the windres option e.g.
`-F pe-x86-64`. In GNU windres, that option takes BFD style format names
such as pe-i386 or pe-x86-64. As libbfd in binutils doesn't support
Windows on ARM, there's no such canonical name for the ARM targets.
Therefore, as an LLVM specific extension, this option is extended to
allow passing full triples, too.
Differential Revision: https://reviews.llvm.org/D100756
This implements an LLVM tool that's flag- and output-compatible
with macOS's `otool` -- except for bugs, but from testing with both
`otool` and `xcrun otool-classic`, llvm-otool matches vanilla
otool's behavior very well already. It's not 100% perfect, but
it's a very solid start.
This uses the same approach as llvm-objcopy: llvm-objdump uses
a different OptTable when it's invoked as llvm-otool. This
is possible thanks to D100433.
Differential Revision: https://reviews.llvm.org/D100583
D73568 removed the lit feature object-emission, because it was introduced for a
target which did not support the integrated assembler, and that target no longer
required the feature. XCore still does not support the integrated assembler,
so a build with XCore as the default target fails tests requiring
object-emission. This issue was not publicly visible because there was not a
buildbot for XCore as the default target. We fixed the failures downstream. We
now have builder clang-xcore-ubuntu-20-x64 on the staging buildmaster, which
shows the failures. We would like to make upstream build green.
Omit DebugInfo/Generic on XCore to avoid annotating 70 separate files.
Differential Revision: https://reviews.llvm.org/D98508
The test case added in 258f055ed9 was lacking two important details for the test infrastructure. ae217bf1f3 added the executable to LLVM_TEST_DEPENDS in CMake to make sure the exectubale gets built before we run the test suite. This patch adds a ToolSubst for the executable in LIT, which replaces the tool invokation in the RUN line with an absolute path. It makes sure we don't run accidentally run some other tool from the user's PATH. The test works without it in case LLVM's main binary directory happens to be the working directory (which is default apparently). Configurations that don't build the examples ignore failures for this ToolSubst (and won't run the test).
Reviewed By: echristo
Differential Revision: https://reviews.llvm.org/D99931
This is a similarity visualization tool that accepts a Module and
passes it to the IRSimilarityIdentifier. The resulting SimilarityGroups
are output in a JSON file.
Tests are found in test/tools/llvm-sim and check for the file not found,
a bad module, and that the JSON is created correctly.
Reviewers: paquette, jroelofs, MaskRay
Recommit of: 15645d044b to fix linking
errors.
Differential Revision: https://reviews.llvm.org/D86974
Link: https://lists.llvm.org/pipermail/llvm-dev/2020-October/146162.html "[RFC] FileCheck: (dis)allowing unused prefixes"
If a downstream project using lit needs time for transition,
add the following to `lit.local.cfg`:
```
from lit.llvm.subst import ToolSubst
fc = ToolSubst('FileCheck', unresolved='fatal')
config.substitutions.insert(0, (fc.regex, 'FileCheck --allow-unused-prefixes'))
```
Differential Revision: https://reviews.llvm.org/D95849
This patch sets the default for llvm tests, with the exception of tests
under Reduce, because quite a few of them use 'FileCheck' as parameter
to a tool, and including a flag as that parameter would complicate
matters.
The rest of the patch undo-es the lit.local.cfg changes we progressively
introduced as temporary measure to avoid regressions under various
directories.
Differential Revision: https://reviews.llvm.org/D95111
Explicitly opt-out llvm/test/Transforms/Attributor.
Verified by flipping the default value of allow-unused-prefixes and
observing that none of the failures were under llvm/test/Transforms.
Differential Revision: https://reviews.llvm.org/D92404
This diff adds llvm-bitcode-strip driver to llvm-objcopy.
In the future this will enable us to build a replacement for the tool bitcode_strip.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D87212
Summary:
When running a large test in LLVM_ENABLE_EXPENSIVE_CHECKS=ON mode,
buildbot could hit timeout.
Disable the test when this mode is on.
Also disable it for debug so that the test won't hang for too long.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D87794
This matches the changes made to handling of zlib done in 10b1b4a
where we rely on find_package and the imported target rather than
manually appending the library and include paths. The use of
LLVM_LIBXML2_ENABLED has been replaced by LLVM_ENABLE_LIBXML2
thus reducing the number of variables.
Differential Revision: https://reviews.llvm.org/D84563
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
This patch has explored several alternatives. The current semantics are similar to
what @dblaikie proposed.
`split-file filename output` splits the input file into multiple parts separated by
regex `^(.|//)--- filename` and write each part to the file `output/filename`
(`filename` can include path separators).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
# RUN: split-file %s %t
# RUN: llvm-mc %t/asm -o %t.o
# RUN: ld.lld -T %t/lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
# asm
...
# lds
...
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: split-file %s %t
// RUN: llc < %t/1.ll | FileCheck %s --check-prefix=CASE1
// RUN: llc < %t/2.ll | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
For example, when testing parsing errors if the recovery mechanism isn't possible,
grouping the tests in one file can more readily see test coverage/strategy.
//--- 1.ll
...
//--- 2.ll
...
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson, lattner
Differential Revision: https://reviews.llvm.org/D83834
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
`extract part filename` splits the input file into multiple parts separated by
regex `^(.|//)--- ` and extract the specified part to stdout or the
output file (if specified).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
// RUN: extract lds %s -o %t.lds
// RUN: extract asm %s -o %t.s
// RUN: llvm-mc %t.s -o %t.o
// RUN: ld.lld -T %t.lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: extract case1 %s | llc | FileCheck %s --check-prefix=CASE1
// RUN: extract case2 %s | llc | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
This is sometimes better than having multiple test files.
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83834
This patch extends D58439 (`llvm/test/{yaml2obj,obj2yaml}/**/*.yaml`) and runs all
`llvm/test/**/*.yaml`
Many directories have configured `.yaml` (see the deleted lit.local.cfg
files). Yet still some don't configure .yaml and have caused stale tests:
* 8c5825befb test/llvm-readobj
* bdc3134e23 test/ExecutionEngine
Just hoist .yaml to `llvm/test/lit.cfg.py`. Also delete .cxx which is
not used. The number of tests running on my machine increases from 38304 to 38309.
The list of new tests:
```
ExecutionEngine/RuntimeDyld/X86/ELF_x86-64_none.yaml
Object/archive-error-tmp.txt
tools/llvm-ar/coff-weak.yaml
tools/llvm-readobj/ELF/verneed-flags.yaml
tools/obj2yaml/COFF/bss.s
```
Reviewed By: grimar, jhenderson, rupprecht
Differential Revision: https://reviews.llvm.org/D83350
Summary:
This matches the behavior of GNU addr2line. We previously treated
hexadecimal addresses as binary if they started with 0b, otherwise as
octal if they started with 0, otherwise as decimal.
This only affects llvm-addr2line; the behavior of llvm-symbolize is
unaffected.
Reviewers: ikudrin, rupprecht, jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73306
This should make both static and dynamic NewPM plugins work with LTO.
And as a bonus, it makes static linking of OldPM plugins more reliable
for plugins with both an OldPM and NewPM interface.
I only implemented the command-line flag to specify NewPM plugins in
llvm-lto2, to show it works. Support can be added for other tools later.
Differential Revision: https://reviews.llvm.org/D76866
Basically change the layout to please `go build` and remove references to
`llvm-go`.
Update llvm/test/Bindings/Go/ to use the system go compiler
Differential Revision: https://reviews.llvm.org/D74540
Noah Shutty