This improves find_darwin_sdk_dir to cache the results of executing xcodebuild to find the SDK. Should significantly reduce the CMake re-configure time.
Differential Revision: https://reviews.llvm.org/D34736
llvm-svn: 307344
Adds a CMake option DARWIN_PREFER_PUBLIC_SDK, off by default. When on, this prefers to use the public SDK, even when an internal one is present. With this, it's easy to emulate a build that the public buildbots are doing.
Differential Revision: https://reviews.llvm.org/D35071
llvm-svn: 307330
This patch adds a basic support for running the ASan lit test suite against an iOS Simulator. This is done by generating more lit.site.cfg configurations into subdirectories such as IOSSimI386Config and IOSSimX86_64Config. These test suites are not added into "check-all" or into "check-asan", they have to be run manually.
Differential Revision: https://reviews.llvm.org/D31477
llvm-svn: 301443
Summary:
Now that __thread is no longer used for lsan on darwin, i386 builds
can be enabled.
Reviewers: kcc, kubamracek
Subscribers: danalbert, srhines, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29995
llvm-svn: 298946
Summary: Currently, we build the compiler-rt runtimes with link-time optimization if LTO is configured for the LLVM project. This will break external programs that don't invoke the linker in such a way that it supports LLVM's LTO. To avoid this, this change causes the compiler-rt runtimes to be compiled with -fno-lto. This also makes the check-profile tests work on systems when doing a lld LTO build on a system where the system linker does not support LLVM LTO.
Reviewers: rnk, davidxl
Reviewed By: davidxl
Subscribers: dberris, mgorny, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D31218
llvm-svn: 298525
Summary: check_cxx_compiler_flag and check_library_exists could fail because they ignored CMAKE_EXE_LINKER_FLAGS and therefore would always fail to produce executables. Cmake policy CMP0056 fixes this, but was explicitly set to OLD in our CMakeLists because it caused problems with test_target_arch. This change sets the policy to NEW to fix the problem with the compiler and library tests, and temporarily clears CMAKE_EXE_LINKER_FLAGS inside test_target_arch to emulate the old behavior there. This allows, for example, LTO builds that require lld to succeed.
Reviewers: davidxl, beanz
Reviewed By: beanz
Subscribers: fjricci, dberris, mgorny, mehdi_amini, tejohnson, rnk, llvm-commits
Differential Revision: https://reviews.llvm.org/D31098
llvm-svn: 298413
Summary:
These sanitizers are enabled and used in Android but got built with
Android's build system. This change enables them in the CMake build
system.
Reviewers: eugenis
Subscribers: llvm-commits, danalbert, srhines, mgorny
Differential Revision: https://reviews.llvm.org/D30127
llvm-svn: 295523
Summary:
Version 8 is the first version to support the __thread
keyword, which is required for building lsan for
64-bit ios.
Reviewers: kubamracek, kcc, glider
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29787
llvm-svn: 295412
Summary:
Adds a new cmake flag 'COMPILER_RT_ENABLE_LSAN_OSX', which enables lsan
compilation and is turned off by default. Patches to fix build errors
when this flag is enabled will be uploaded soon.
This is part of an effort to port LSan to OS X, but LSan on OS X does not
currently work or pass tests currently.
Reviewers: kubamracek, kcc, glider, alekseyshl
Reviewed By: kubamracek
Subscribers: danalbert, srhines, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29783
llvm-svn: 295012
Revert "Fix -Wsign-compare - this might not be quite right, but preserves behavior"
Revert "[XRay] Implement powerpc64le xray."
This reverts commit r294826.
This reverts commit r294781.
llvm-svn: 294842
Summary:
powerpc64 big-endian is not supported, but I believe that most logic can
be shared, except for xray_powerpc64.cc.
Also add a function InvalidateInstructionCache to xray_util.h, which is
copied from llvm/Support/Memory.cpp. I'm not sure if I need to add a unittest,
and I don't know how.
Reviewers: dberris, echristo, iteratee, kbarton, hfinkel
Subscribers: mehdi_amini, nemanjai, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29742
llvm-svn: 294781
Summary:
Hi Michal,
Would you be able to review this simple fix, please?
Since r291504 compiler-rt uses `llvm-config --cmakedir` to get the path to the LLVM CMake modules.
On Windows this option returns Windows style path with backslashes. CMake treats backslashes as beginning of an escaped character and thus fails to append the path to `CMAKE_MODULE_PATH`.
Reviewers: compnerd, mgorny
Reviewed By: mgorny
Subscribers: compnerd, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D28908
llvm-svn: 293195
Summary:
Adding ARM64 as a supported architecture for Scudo.
The random shuffle is not yet supported for SizeClassAllocator32, which is used
by the AArch64 allocator, so disable the associated test for now.
Reviewers: kcc, alekseyshl, rengolin
Reviewed By: rengolin
Subscribers: aemerson, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D28960
llvm-svn: 293068
Breaks tests on i686/Linux due to missing clang driver support:
error: unsupported option '-fsanitize=leak' for target 'i386-unknown-linux-gnu'
llvm-svn: 292844
People keep asking LSan to be available on 32 bit targets (e.g. https://github.com/google/sanitizers/issues/403)
despite the fact that false negative ratio might be huge (up to 85%). This happens for big real world applications
that may contain random binary data (e.g. browser), but for smaller apps situation is not so terrible and LSan still might be useful.
This patch adds initial support for x86 Linux (disabled by default), ARM32 is in TODO list.
We used this patch (well, ported to GCC) on our 32 bit mobile emulators and it worked pretty fine
thus I'm posting it here to initiate further discussion.
Differential Revision: https://reviews.llvm.org/D28609
llvm-svn: 292775
Summary:
Setting -DCOMPILER_RT_TEST_TARGET_TRIPLE=armv6m-none-eabi will enable the build of builtin functions ARMv6m.
Currently, only those asms that support armv6m are added.
TODO:All asm sin ARM_EABI_Sources are ported for thumb1 so Thumb1_EABI_Sources will be deprecated.
Reviewers: rengolin, compnerd
Reviewed By: compnerd
Subscribers: aemerson, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D28463
llvm-svn: 292504
Summary:
ARM & AArch64 runtime detection for hardware support of CRC32 has been added
via check of the AT_HWVAL auxiliary vector.
Following Michal's suggestions in D28417, the CRC32 code has been further
changed and looks better now. When compiled with full relro (which is strongly
suggested to benefit from additional hardening), the weak symbol for
computeHardwareCRC32 is read-only and the assembly generated is fairly clean
and straight forward. As suggested, an additional optimization is to skip
the runtime check if SSE 4.2 has been enabled globally, as opposed to only
for scudo_crc32.cpp.
scudo_crc32.h has no purpose anymore and was removed.
Reviewers: alekseyshl, kcc, rengolin, mgorny, phosek
Reviewed By: rengolin, mgorny
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D28574
llvm-svn: 292409
Summary:
As raised in D28304, enabling SSE 4.2 for the whole Scudo tree leads to the
emission of SSE 4.2 instructions everywhere, while the runtime checks only
applied to the CRC32 computing function.
This patch separates the CRC32 function taking advantage of the hardware into
its own file, and only enabled -msse4.2 for that file, if detected to be
supported by the compiler.
Another consequence of removing SSE4.2 globally is realizing that memcpy were
not being optimized, which turned out to be due to the -fno-builtin in
SANITIZER_COMMON_CFLAGS. So we now explicitely enable builtins for Scudo.
The resulting assembly looks good, with some CALLs are introduced instead of
the CRC32 code being inlined.
Reviewers: kcc, mgorny, alekseyshl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28417
llvm-svn: 291570
Summary:
The build system was inconsistent in its naming conventions for
link flags. This patch changes all uses of LINKFLAGS to LINK_FLAGS,
for consistency with cmake's LINK_FLAGS property.
This patch should make it easier to search the source code for
uses of link flags, as well as providing the benefit of improved
style and consistency.
Reviewers: compnerd, beanz
Subscribers: kubabrecka, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D28506
llvm-svn: 291539
Use the new --cmakedir option to obtain LLVM_CMAKE_PATH straight from
llvm-config. Fallback to local reconstruction if llvm-config does not
support this option.
llvm-svn: 291504
Summary:
By default, darwin requires a definition for weak interface functions at
link time. Adding the '-U' link flag with each weak function allows these
weak interface functions to be used without definitions, which mirrors
behavior on linux and windows.
Reviewers: compnerd, eugenis
Subscribers: kubabrecka, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D28203
llvm-svn: 291417
Summary:
By default, darwin requires a definition for weak interface functions at
link time. Adding the '-U' link flag with each weak function allows these
weak interface functions to be used without definitions, which mirrors
behavior on linux and windows.
Reviewers: compnerd, eugenis
Subscribers: kubabrecka, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D28203
llvm-svn: 291314
Disable the code appending -msse4.2 flag implicitly when the compiler
supports it. The compiler support for this flags do not indicate that
the underlying CPU will support SSE4.2, and passing it may result in
SSE4.2 code being emitted *implicitly*.
If the target platform supports SSE4.2 appropriately, the relevant bits
should be already enabled via -march= or equivalent. In this case
passing -msse4.2 is redundant.
If a runtime detection is desired (which seems to be a case with SCUDO),
then (as gcc manpage points out) the specific SSE4.2 needs to be
isolated into a separate file, the -msse4.2 flag can be forced only
for that file and the function defined in that file can only be called
when the CPU is determined to support SSE4.2.
This fixes SIGILL on SCUDO when it is compiled using gcc-5.4.
Differential Revision: https://reviews.llvm.org/D28304
llvm-svn: 291217
a warning that 'gtest-all.cc' directly triggers in the newer 1.8.0
version.
This should fix a warning in folks' build and bring a couple of -Werror
bots back to life.
llvm-svn: 291070
Summary:
With the previous modifications, the code works on ARM32. The random shuffle
test is unsupported on 32-bit platforms for the moment and being marked as
such. There is no hardware support for the checksum computation yet, this will
come at a later point.
Reviewers: kcc, alekseyshl
Subscribers: llvm-commits, aemerson, rengolin, mgorny
Differential Revision: https://reviews.llvm.org/D27957
llvm-svn: 290201
This is used when building builtins for multiple targets as part
of LLVM runtimes.
Differential Revision: https://reviews.llvm.org/D26653
llvm-svn: 289489
Since we’re adding an entry into COMPILER_RT_SUPPORTED_ARCH for all architectures of all Darwin platforms, COMPILER_RT_SUPPORTED_ARCH often ends up having duplicate items. Let’s remove them.
Differential Revision: https://reviews.llvm.org/D25996
llvm-svn: 288681
Summary:
This update introduces i386 support for the Scudo Hardened Allocator, and
offers software alternatives for functions that used to require hardware
specific instruction sets. This should make porting to new architectures
easier.
Among the changes:
- The chunk header has been changed to accomodate the size limitations
encountered on 32-bit architectures. We now fit everything in 64-bit. This
was achieved by storing the amount of unused bytes in an allocation rather
than the size itself, as one can be deduced from the other with the help
of the GetActuallyAllocatedSize function. As it turns out, this header can
be used for both 64 and 32 bit, and as such we dropped the requirement for
the 128-bit compare and exchange instruction support (cmpxchg16b).
- Add 32-bit support for the checksum and the PRNG functions: if the SSE 4.2
instruction set is supported, use the 32-bit CRC32 instruction, and in the
XorShift128, use a 32-bit based state instead of 64-bit.
- Add software support for CRC32: if SSE 4.2 is not supported, fallback on a
software implementation.
- Modify tests that were not 32-bit compliant, and expand them to cover more
allocation and alignment sizes. The random shuffle test has been deactivated
for linux-i386 & linux-i686 as the 32-bit sanitizer allocator doesn't
currently randomize chunks.
Reviewers: alekseyshl, kcc
Subscribers: filcab, llvm-commits, tberghammer, danalbert, srhines, mgorny, modocache
Differential Revision: https://reviews.llvm.org/D26358
llvm-svn: 288255
The Clang driver on macOS decides the deployment target based on various things, like your host OS version, the SDK version and some environment variables, which makes lit tests pass or fail based on your environment. Let's make sure we run all lit tests with `-mmacosx-version-min=${SANITIZER_MIN_OSX_VERSION}` (10.9 unless overriden).
Differential Revision: https://reviews.llvm.org/D26929
llvm-svn: 288186
This fixes an incorrect standard usage of GNU99 when the compiler check was for
the ISO standard C99. Furthermore, bump the dependency up to C11. The
motivation for this change is ARM EHABI compatibility with clang 3.8. We rely
on a type definition redefinition which causes an error with -Werror builds.
This is problematic for FreeBSD builds. Switching to C11 allows the
compatibility without the unnecessary pedantic warning. The alternative would
be to clutter the support header with a `pragma clang diagnostic ignore`. GCC
4.8+ and the supported clang revisions along with MSVC support enough of C11 to
allow building the builtins in C11 mode. No functional change intended.
llvm-svn: 288099
Summary:
Adds a CMake check for whether the compiler used to build the XRay
library supports XRay-instrumentation. If the compiler we're using does
support the `-fxray-instrument` flag (i.e. recently-built Clang), we
define the XRAY_NEVER_INSTRUMENT macro that then makes sure that the
XRay runtime functions never get XRay-instrumented.
This prevents potential weirdness involved with building the XRay
library with a Clang that supports XRay-instrumentation, and is
attempting to XRay-instrument the build of compiler-rt.
Reviewers: majnemer, rSerge, echristo
Subscribers: mehdi_amini, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D26597
llvm-svn: 287068
It's not a good idea to build the sanitizers with e.g. -DCMAKE_OSX_DEPLOYMENT_TARGET=10.12, because some deprecated functions that we intercept will cause build errors. Let's limit the allowed deployment targets to 10.9 (which is the default anyway), and warn when it's set above.
Differential Revision: https://reviews.llvm.org/D26557
llvm-svn: 286859
This was changed in rL276151 and causes problems if the C++ compiler does not
support the same arches as the C compiler.
For the builtins, only the C compiler is tested in try_compile_only.
Additionally, -fno-exceptions is passed in (if available) to work around
the case where no libunwind is available.
Differential Revision: https://reviews.llvm.org/D23654
llvm-svn: 282054
Summary:
Much of the non-Darwin build system assumes that COMPILER_RT_DEFAULT_TARGET_TRIPLE is the default target triple for the compiler being used. With clang as your compiler this isn't necessarily true.
To ensure that the rest of the build system behaves as expected this patch adds "--target=${COMPILER_RT_DEFAULT_TARGET_TRIPLE}" to the compiler flags for C, CXX and ASM sources.
Reviewers: compnerd, rengolin, fjricci
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24156
llvm-svn: 282024
Currently, when doing a ASanified build of LLVM (with Clang, compiler-rt and libcxx) via -DLLVM_USE_SANITIZER=Address and not using any other options, we already disable building of sanitizer runtimes (because they themselves can’t be sanitized) and also exclude the sanitizer tests. However, the same is not done for the profiling runtime, which will build fine, but then all the tests fail due to linking errors. Let’s disable the profiling runtime as well (when LLVM_USE_SANITIZER is set).
Differential Revision: https://reviews.llvm.org/D24657
llvm-svn: 281815
Support overriding LLVM_* variables obtained from llvm-config when doing
stand-alone builds. The override of LLVM_MAIN_SRC_DIR is necessary to
provide LLVM sources when the initial directory used to build LLVM does
no longer exist when compiler-rt is built stand-alone. This is
especially the case when building the projects separately in temporary
directories with unpredictable names.
The code is based on existing CMakeLists.txt from clang. Alike clang, it
extends the override to all queried variables.
Differential Revision: https://reviews.llvm.org/D24005
llvm-svn: 281461
Summary:
A few small changes required to permit building the sanitizers
with Clang instead of only with MSVC.
Reviewers: compnerd, beanz, rnk
Subscribers: beanz, timurrrr, kubabrecka, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D24092
llvm-svn: 280863
Summary:
Make sure that windows libraries contain the suffixes expected by clang.
This is expecially important when compiling the windows builtins with
clang, as cmake will use .a as the suffix by default.
Reviewers: beanz, compnerd
Subscribers: llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D24046
llvm-svn: 280854
With this patch 10 out of 13 tests are passing.
Following is the list of failing tests:
struct-simple.cpp
workingset-signal-posix.cpp
mmap-shadow-conflict.c
Reviewed by bruening
Differential: D23799
llvm-svn: 280795
There was an invalid entry in the sanitizer list, remove it. This has no effect
on the building, just removes the definition of a cached variable.
llvm-svn: 280378
This patch builds on LLVM r279776.
In this patch I've done some cleanup and abstracted three common steps runtime components have in their CMakeLists files, and added a fourth.
The three steps I abstract are:
(1) Add a top-level target (i.e asan, msan, ...)
(2) Set the target properties for sorting files in IDE generators
(3) Make the compiler-rt target depend on the top-level target
The new step is to check if a command named "runtime_register_component" is defined, and to call it with the component name.
The runtime_register_component command is defined in llvm/runtimes/CMakeLists.txt, and presently just adds the component to a list of sub-components, which later gets used to generate target mappings.
With this patch a new workflow for runtimes builds is supported. The new workflow when building runtimes from the LLVM runtimes directory is:
> cmake [...]
> ninja runtimes-configure
> ninja asan
The "runtimes-configure" target builds all the dependencies for configuring the runtimes projects, and runs CMake on the runtimes projects. Running the runtimes CMake generates a list of targets to bind into the top-level CMake so subsequent build invocations will have access to some of Compiler-RT's targets through the top-level build.
Note: This patch does exclude some top-level targets from compiler-rt libraries because they either don't install files (sanitizer_common), or don't have a cooresponding `check` target (stats).
llvm-svn: 279863
Summary:
Since we generate the compiler invocation on our own, we need to
manually add -target if CMAKE_C_COMPILER_TARGET has been specified.
Reviewers: compnerd, beanz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23823
llvm-svn: 279747
Summary: This fixes the omission of -fPIC when building the builtins.
Reviewers: compnerd, beanz
Subscribers: dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D23729
llvm-svn: 279469
This should resolve PR23162. This patch has two parts.
First we need to check the error code from xcodebuild when querying for SDKs, second if the OS X SDK is not discovered, we ensure that /usr/include exists and use / as the OS X sysroot.
llvm-svn: 279336
This is a wrapper target of all the component install targets. This wrapper target will be used by the new LLVM runtimes directory to connect top-level targets to the runtime project target.
llvm-svn: 279333
Introduce a new CMake option `COMPILER_RT_SANITIZERS_TO_BUILD` which takes
either a special token `all` (default) which will preserve the current behaviour
or a CMake list of sanitizers to build. It will still perform the normal checks
if the sanitizer is requested. It only permits a further means to exclude a
particular sanitizer. This gives finer grained control than
`COMPILER_RT_BUILD_SANITIZERS` which only gives an all or nothing control.
llvm-svn: 279253
This fixes a long-standing TODO by implementing a compiler check for supporting the _Atomic keyword. If the _Atomic keyword is supported by the compiler we should include it in the builtin library sources.
llvm-svn: 278454
Summary: rnk reported that MSVC ignores unknown flags and still returns 0. This should cause unknown flags to be an error during the compiler check.
Reviewers: rnk
Subscribers: brad.king, llvm-commits
Differential Revision: https://reviews.llvm.org/D23030
llvm-svn: 277377
Allowing this variable to be cached makes it possible to repair the MIPS
buildbots in lieu of either fixing the mips64 sanitizer issues or fixing the
detection of mips64 support (which I think was changed by r268977 but didn't
take effect on this buildbot until the last couple days) so that it returns to
not being built on these buildbots.
llvm-svn: 276402
I think it's wiped out the build area and fully-reconfigured for the first time
since r268977. This seems to have caused Mips64 to become enabled when it wasn't
before because compiling with -mabi=64 succeeds but linking with -mabi=64 fails.
llvm-svn: 276256
Summary:
This is a fixed-up version of D21612, to address failure identified post-commit.
Original commit description:
This patch implements the initialisation and patching routines for the XRay runtime, along with the necessary trampolines for function entry/exit handling. For now we only define the basic hooks for allowing an implementation to define a handler that gets run on function entry/exit. We expose a minimal API for controlling the behaviour of the runtime (patching, cleanup, and setting the handler to invoke when instrumenting).
Fixes include:
- Gating XRay build to only Linux x86_64 and with the right dependencies in case it is the only library being built
- Including <cstddef> to fix std::size_t issue
Reviewers: kcc, rnk, echristo
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D22611
llvm-svn: 276251
and also the follow-up "[xray] Only build xray on Linux for now"
Two build errors were reported on the llvm-commits list:
[ 88%] Building CXX object lib/xray/CMakeFiles/clang_rt.xray-x86_64.dir/xray_flags.cc.o
/mnt/b/sanitizer-buildbot1/sanitizer-x86_64-linux/build/llvm/projects/compiler-rt/lib/xray/xray_init.cc:23:10: fatal error: 'llvm/Support/ELF.h' file not found
#include "llvm/Support/ELF.h"
^
and
In file included from /w/src/llvm.org/projects/compiler-rt/lib/xray/xray_interface.cc:16:
/w/src/llvm.org/projects/compiler-rt/lib/xray/xray_interface_internal.h:36:8: error:
no type named 'size_t' in namespace 'std'
std::size_t Entries;
~~~~~^
llvm-svn: 276186
Summary:
A sysroot without c++ headers is able to build compiler-rt, don't
require them when configuring available architectures from cmake.
Reviewers: samsonov, beanz, compnerd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22469
llvm-svn: 276151
Summary:
Use stricter comparisons for architecture. This prevents cmake from failing
for sysroots which can only compile armhf and not arm, since
arm MATCHES armhf is true, while arm STREQUAL armhf is false.
Reviewers: beanz, compnerd
Subscribers: aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D22473
llvm-svn: 276148
Should fix the Windows buildbots, and maybe some other non-Linux Unix
bots too.
XRay currently depends on sanitizer_common, so associate it with the
"build sanitizers" option and remove the option for separately
controlling the XRay build.
llvm-svn: 276124
Summary:
This patch implements the initialisation and patching routines for the XRay runtime, along with the necessary trampolines for function entry/exit handling. For now we only define the basic hooks for allowing an implementation to define a handler that gets run on function entry/exit. We expose a minimal API for controlling the behaviour of the runtime (patching, cleanup, and setting the handler to invoke when instrumenting).
Depends on D19904
Reviewers: echristo, kcc, rnk
Subscribers: rnk, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D21612
llvm-svn: 276117
Summary:
This patch is a refactoring of the way cmake 'targets' are grouped.
It won't affect non-UI cmake-generators.
Clang/LLVM are using a structured way to group targets which ease
navigation through Visual Studio UI. The Compiler-RT projects
differ from the way Clang/LLVM are grouping targets.
This patch doesn't contain behavior changes.
Reviewers: kubabrecka, rnk
Subscribers: wang0109, llvm-commits, kubabrecka, chrisha
Differential Revision: http://reviews.llvm.org/D21952
llvm-svn: 275111
The triple must be parsed in base-config-ix.cmake.
Otherwise, the cmake variable ANDROID won't be set and this
will confuse cmake to build unsupported targets targeted for
android.
Diferential revision: http://reviews.llvm.org/D21474
llvm-svn: 273914
Summary:
The MSVC compiler is complaining about invalid flags. The CFLAGS are passed
to the linker (i.e. /Gy-, ...).
Reviewers: rnk
Subscribers: llvm-commits, kubabrecka, chrisha
Differential Revision: http://reviews.llvm.org/D21554
llvm-svn: 273265
Here's the warnings and how they were fixed:
- InstrProfilingUtil.c(110): warning C4013: '_open_osfhandle' undefined; assuming extern returning int
Include io.h to get the prototype.
- warning C4005: 'FILE_MAP_EXECUTE': macro redefinition
Stop trying to support pre-XP versions of Windows, don't attempt to
define this macro.
- InstrProfilingWriter.c(271): warning C4221: nonstandard extension used: 'Data': cannot be initialized using address of automatic variable 'Header'
- InstrProfilingWriter.c(275): warning C4221: nonstandard extension used: 'Data': cannot be initialized using address of automatic variable 'Zeroes'
Turn this warning off. This is definitely legal in C++, all compilers
accept it, and I only have room for half of one language standard in my
brain.
- InstrProfilingValue.c(320): warning C4113: 'uint32_t (__cdecl *)()' differs in parameter lists from 'uint32_t (__cdecl *)(void)'
Fix this with an explicit (void) in the prototype.
- InstrProfilingMerge.c.obj : warning LNK4006: _VPMergeHook already defined in InstrProfilingMergeFile.c.obj; second definition ignored
Last remaining warning. This is from linking a selectany definition with
a strong definition. We need to sort out weak symbols in compiler-rt in
general, though.
llvm-svn: 273026
- Fixes warnings about the ignored -fms-compatibility-version flag.
- Fixes warnings about overriding /W4 with /W3 and back.
- Fixes a warning where PREFETCH() expanded to nothing in a braceless if
block.
llvm-svn: 273021
Summary:
This is an initial implementation of a Hardened Allocator based on Sanitizer Common's CombinedAllocator.
It aims at mitigating heap based vulnerabilities by adding several features to the base allocator, while staying relatively fast.
The following were implemented:
- additional consistency checks on the allocation function parameters and on the heap chunks;
- use of checksum protected chunk header, to detect corruption;
- randomness to the allocator base;
- delayed freelist (quarantine), to mitigate use after free and overall determinism.
Additional mitigations are in the works.
Reviewers: eugenis, aizatsky, pcc, krasin, vitalybuka, glider, dvyukov, kcc
Subscribers: kubabrecka, filcab, llvm-commits
Differential Revision: http://reviews.llvm.org/D20084
llvm-svn: 271968
This tweak to constructing output paths allows compiler-rt to use LLVM
output variables if they are set regardless of whether or not the build
is in-tree.
llvm-svn: 271749
This macro is called from the base config, so it can't live in config-ix, it needs to be in the utils. I suspect the only reason this hasn't caused problems is that nobody is building the Android builtins from the builtins subdirectory.
llvm-svn: 271693
It's fixing compilation errors. The runtime is not yet working.
Missing features:
OverrideFunction for x64
an equiv function for inline asm (atomic_compare_exchange_strong)
shadow memory offset needs to be adjusted
RoundUpToInstrBoundary for x64
They will be implemented by subsequent patches.
Patch by Wei Wang.
Differential revision: http://reviews.llvm.org/D20455
llvm-svn: 271049
Summary:
When using a multi-configuration build (i.e. MSVC) the output path where
libraries are dropped is incorrect.
Example:
```
C:\src\llvm\examples>d:\src\llvm\build\Release\bin\clang-cl.exe -fsanitize=address test.cc
LINK : fatal error LNK1181: cannot open input file 'd:\src\llvm\build\Release\bin\..\lib\clang\3.9.0\lib\windows\clang_rt.asan-i386.lib'
```
The dropped executable path contains the configuration 'Release':
```
'd:\src\llvm\build\Release\bin\..\lib\clang\3.9.0\lib\windows\Release\clang_rt.asan-i386.lib'
```
The variable 'RUNTIME_OUTPUT_DIRECTORY' is used to specify the output directory.
But CMAKE is appending the current configuration (i.e. Debug, Release).
see: https://cmake.org/cmake/help/v3.0/prop_tgt/RUNTIME_OUTPUT_DIRECTORY.html
```
"Multi-configuration generators (VS, Xcode) append a per-configuration subdirectory to the specified directory."
```
To avoid this problem, the configuration specific variable must be set:
'RUNTIME_OUTPUT_DIRECTORY_DEBUG', 'RUNTIME_OUTPUT_DIRECTORY_RELEASE', and so on.
Reviewers: ddunbar, chapuni, rnk
Subscribers: kubabrecka, llvm-commits
Differential Revision: http://reviews.llvm.org/D20261
llvm-svn: 269658
Summary:
This patch adds support for building lib/builtins without a fully functioning toolchain. It allows you to bootstrap a cross-compiler, which previously couldn't be done with CMake.
This patch contains the following specific changes:
* Split builtin-specific code out of config-ix.cmake into builtin-config-ix.cmake
* Split some common CMake functionality needed by both builtins and sanitizers into base-config-ix.cmake
* Made lib/builtins/CMakeLists.txt able to be a top-level CMake configuration
I have tested this on Darwin targeting embedded Darwin, and on FreeBSD x86_64 targeting FreeBSD AArch64.
This patch depends on http://reviews.llvm.org/D19692, and is the last part of http://reviews.llvm.org/D16653.
Reviewers: samsonov, iains, jroelofs
Subscribers: compnerd, aemerson, tberghammer, danalbert, srhines, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D19742
llvm-svn: 268977
Summary:
One of the big limitations we have in the compiler-rt build system today is that we cannot bootstrap building the builtins because you need a fully functional toolchain to pass CMake's tests.
This change adds support for compile only tests.
It is NFC because nothing is using the compile-only tests yet.
I believe this is the last separable part of D16653.
Reviewers: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19692
llvm-svn: 268427
This happens to be working now because the includes exist in another CMake file that is included before this one. That will change with upcoming refactoring.
llvm-svn: 267912
This change modifies find_darwin_sdk_dir to set a variable if a Darwin "Internal" SDK is present which allows CMake to disable components that require internal-only APIs.
This mechanism is then used to disable TSan when an internal SDK is not present.
llvm-svn: 267575
Summary:
Adds the initial version of a runtime library for the new
EfficiencySanitizer ("esan") family of tools. The library includes:
+ Slowpath code via callouts from the compiler instrumentation for
each memory access.
+ Registration of atexit() to call finalization code.
+ Runtime option flags controlled by the environment variable
ESAN_OPTIONS. The common sanitizer flags are supported such as
verbosity and log_path.
+ An initial simple test.
Still TODO: common code for libc interceptors and shadow memory mapping,
and tool-specific code for shadow state updating.
Reviewers: eugenis, vitalybuka, aizatsky, filcab
Subscribers: filcab, vkalintiris, kubabrecka, llvm-commits, zhaoqin, kcc
Differential Revision: http://reviews.llvm.org/D19168
llvm-svn: 267060
sanitizer_common is now in good enough shape on s390x to support UBSan
- all tests passing. Let's enable it.
Differential Revision: http://reviews.llvm.org/D19157
llvm-svn: 266483
For debugging it is useful to be able to generate dSYM files but not strip the executables. This change adds the ability to skip stripping by setting COMPILER_RT_EXTERNALIZE_DEBUGINFO_SKIP_STRIP=On.
llvm-svn: 265057
Update the compiler-rt cmake to build TSan dylibs for iOS-style simulators when the
corresponding COMPILER_RT_ENABLE_FOO_OS setting is enabled.
Differential Revision: http://reviews.llvm.org/D18277
Part of rdar://problem/24048382
llvm-svn: 263910
Kuba Mracek