In the discussion on http://reviews.llvm.org/D15730, Andy pointed out we had a utility function for merging MMO lists. Since it turned we actually had two copies and there's another review in progress (http://reviews.llvm.org/D15230) which needs the same, extract it into a utility function and clean up the interfaces to make it easier to use with a MachineInstBuilder.
I introduced a pair here to track size and allocation together. I think we should probably move in the direction of the MachineOperandsRef helper class, but I'm leaving that for further work. I want to get the poison state introduced before I make major changes to the interface.
Differential Revision: http://reviews.llvm.org/D15757
llvm-svn: 256909
This is a recommit of r256004 which was reverted in r256160. The issue was the
incorrect promotion for half and byte loads transformed into mov instructions.
This fix will replace half and byte type loads only with bit field extracts.
Original commit message:
This change promotes load instructions which directly read from stored by
replacing them with mov instructions. If the store is wider than the load,
the load will be replaced with a bitfield extract.
For example :
STRWui %W1, %X0, 1
%W0 = LDRHHui %X0, 3
becomes
STRWui %W1, %X0, 1
%W0 = UBFMWri %W1, 16, 31
llvm-svn: 256249
This patch adds to the target description two additional patterns for matching
extract-extend operations to SMOV. The patterns catch the v16i8-to-i64 and
v8i16-to-i64 cases. The existing patterns miss these cases because the
extracted elements must first be legalized to i32, resulting in any_extend
nodes.
This was originally implemented as a DAG combine (r255895), but was reverted
due to failing out-of-tree tests.
llvm-svn: 256176
Disable post-ra scheduler for perturbed tests to appease the bots and to
preserve the history of the tests.
http://reviews.llvm.org/D15652
llvm-svn: 256158
This change promotes load instructions which directly read from stores by
replacing them with mov instructions. If the store is wider than the load,
the load will be replaced with a bitfield extract.
For example :
STRWui %W1, %X0, 1
%W0 = LDRHHui %X0, 3
becomes
STRWui %W1, %X0, 1
%W0 = UBFMWri %W1, 16, 31
llvm-svn: 256004
This patch enables PostRAScheduler specifically for AArch64 generic build,
which is beneficial from the performance perspective.
Speedups up to 2 to 7% for some benchmarks on A57 and A53 are observed.
Also benchmarks from LLVM test-suite did not regress.
Differential Revision: http://reviews.llvm.org/D15557
llvm-svn: 255896
This patch adds a DAG combine for (any_extend (extract_vector_elt v, i)) ->
(extract_vector_elt v, i). The combine enables us to better match some SMOV
patterns.
Differential Revision: http://reviews.llvm.org/D15515
llvm-svn: 255895
The access function has a short entry and a short exit, the initialization
block is only run the first time. To improve the performance, we want to
have a short frame at the entry and exit.
We explicitly handle most of the CSRs via copies. Only the CSRs that are not
handled via copies will be in CSR_SaveList.
Frame lowering and prologue/epilogue insertion will generate a short frame
in the entry and exit according to CSR_SaveList. The majority of the CSRs will
be handled by register allcoator. Register allocator will try to spill and
reload them in the initialization block.
We add CSRsViaCopy, it will be explicitly handled during lowering.
1> we first set FunctionLoweringInfo->SplitCSR if conditions are met (the target
supports it for the given machine function and the function has only return
exits). We also call TLI->initializeSplitCSR to perform initialization.
2> we call TLI->insertCopiesSplitCSR to insert copies from CSRsViaCopy to
virtual registers at beginning of the entry block and copies from virtual
registers to CSRsViaCopy at beginning of the exit blocks.
3> we also need to make sure the explicit copies will not be eliminated.
The target independent portion was committed as r255353.
rdar://problem/23557469
Differential Revision: http://reviews.llvm.org/D15341
llvm-svn: 255821
This patch adds some missing calls to MBB::normalizeSuccProbs() in several
locations where it should be called. Those places are found by checking if the
sum of successors' probabilities is approximate one in MachineBlockPlacement
pass with some instrumented code (not in this patch).
Differential revision: http://reviews.llvm.org/D15259
llvm-svn: 255455
After much discussion, ending here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151123/315620.html
it has been decided that, instead of having the vectorizer directly generate
special absdiff and horizontal-add intrinsics, we'll recognize the relevant
reduction patterns during CodeGen. Accordingly, these intrinsics are not needed
(the operations they represent can be pattern matched, as is already done in
some backends). Thus, we're backing these out in favor of the current
development work.
r248483 - Codegen: Fix llvm.*absdiff semantic.
r242546 - [ARM] Use [SU]ABSDIFF nodes instead of intrinsics for VABD/VABA
r242545 - [AArch64] Use [SU]ABSDIFF nodes instead of intrinsics for ABD/ABA
r242409 - [Codegen] Add intrinsics 'absdiff' and corresponding SDNodes for absolute difference operation
llvm-svn: 255387
computeRegisterLiveness() was broken in that it reported dead for a
register even if a subregister was alive. I assume this was because the
results of analayzePhysRegs() are hard to understand with respect to
subregisters.
This commit: Changes the results of analyzePhysRegs (=struct
PhysRegInfo) to be clearly understandable, also renames the fields to
avoid silent breakage of third-party code (and improve the grammar).
Fix all (two) users of computeRegisterLiveness() in llvm: By reenabling
it and removing workarounds for the bug.
This fixes http://llvm.org/PR24535 and http://llvm.org/PR25033
Differential Revision: http://reviews.llvm.org/D15320
llvm-svn: 255362
These are redundant pairs of nodes defined for
INSERT_VECTOR_ELEMENT/EXTRACT_VECTOR_ELEMENT.
insertelement/extractelement are slightly closer to the corresponding
C++ node name, and has stricter type checking so prefer it.
Update targets to only use these nodes where it is trivial to do so.
AArch64, ARM, and Mips all have various type errors on simple replacement,
so they will need work to fix.
Example from AArch64:
def : Pat<(sext_inreg (vector_extract (v16i8 V128:$Rn), VectorIndexB:$idx), i8),
(i32 (SMOVvi8to32 V128:$Rn, VectorIndexB:$idx))>;
Which is trying to do sext_inreg i8, i8.
llvm-svn: 255359
Otherwise, we think that most types that look like they'd fit in a
legal vector type are legal (so, basically, *any* vector type with a
size between 33 and 128 bits, I think, since we use pow2 alignment;
e.g., v2i25, v3f32, ...).
DataLayout::getTypeAllocSize rounds up based on alignment.
When checking for target intrinsic legality, that's not what we want:
if rounding makes a difference, the type isn't legal, and the
target intrinsics shouldn't be used, as they are always assumed legal.
One could make the argument that alloc size is ultimately the most
relevant here, since we're dealing with LD/ST intrinsics. That's only
true if we did legalize them though; that's a problem for another day.
Use DataLayout::getTypeSizeInBits instead of getTypeAllocSizeInBits.
Type::getSizeInBits can't be used because that'd gratuitously break
pointer vector support.
Some of these uses are currently fine, because we only hit them when
the type is already known legal (e.g., r114454). Update them for
consistency. It's faster to avoid the rounding anyway!
llvm-svn: 255089
Summary:
This fixes failure when trying to select
insertelement <4 x half> undef, half %a, i64 0
which gets transformed to a scalar_to_vector node.
The accompanying v4 and v8 tests fail instruction selection without this
patch.
Reviewers: ab, jmolloy
Subscribers: srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D15322
llvm-svn: 255072
ARMv8.2-A adds 16-bit floating point versions of all existing SIMD
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
Note that VFP without SIMD is not a valid combination for any version of
ARMv8-A, but I have ensured that these instructions all depend on both
FeatureNEON and FeatureFullFP16 for consistency.
The ".2h" vector type specifier is now legal (for the scalar pairwise
reduction instructions), so some unrelated tests have been modified as
different error messages are emitted. This is not a problem as the
invalid operands are still caught.
llvm-svn: 255010
When the notion of target specific memory intrinsics was introduced to EarlyCSE, the commit confused the notions of volatile and simple memory access. Since I'm about to start working on this area, cleanup the naming so that patches aren't horribly confusing. Note that the actual implementation was always bailing if the load or store wasn't simple.
Reminder:
- "volatile" - C++ volatile, can't remove any memory operations, but in principal unordered
- "ordered" - imposes ordering constraints on other nearby memory operations
- "atomic" - can't be split or sheared. In LLVM terms, all "ordered" operations are also atomic so the predicate "isAtomic" is often used.
- "simple" - a load which is none of the above. These are normal loads and what most of the optimizer works with.
llvm-svn: 254805
In the case of a conditional branch without a preceding cmp we used to emit
a "and; cmp; b.eq/b.ne" sequence, use tbz/tbnz instead.
Differential Revision: http://reviews.llvm.org/D15122
llvm-svn: 254621
We mustn't introduce a shift of exactly 64-bits for any inputs, since that's an
UNDEF value (and worse, it's not what you want with the natural Arch64
implementation).
The generated code is pretty horrific, but I couldn't come up with an obviously
better alternative (if the amount is constant EXTR could help). Turns out
128-bit shifts are just nasty.
rdar://22491037
llvm-svn: 254475
Summary:
When not useful bits, BitWidth becomes 0 and APInt will not be happy.
See https://llvm.org/bugs/show_bug.cgi?id=25571
We can just mark the operand as IMPLICIT_DEF is none bits of it is used.
Reviewers: t.p.northover, jmolloy
Subscribers: gberry, jmolloy, mgrang, aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14803
llvm-svn: 254440
The Statistical Profiling Extension is an optional extension to
ARMv8.2-A. Since it is an optional extension, I have added the
FeatureSPE subtarget feature to control it. The assembler-visible parts
of this extension are the new "psb csync" instruction, which is
equivalent to "hint #17", and a number of system registers.
Differential Revision: http://reviews.llvm.org/D15021
llvm-svn: 254401
ARMv8.2-A adds 16-bit floating point versions of all existing VFP
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
Most of these instructions are the same as the 32- and 64-bit versions,
but with the type field (bits 23-22) set to 0b11. Previously the top bit
of the size field was always 0, so the instruction classes only provided
a 1-bit size field, which I have widened to 2 bits.
Differential Revision: http://reviews.llvm.org/D15014
llvm-svn: 254198
ARMv8.2-A adds new variants of the "at" (address translate) system
instruction, which take the PSTATE.PAN bit (added in ARMv8.1-A). These
are a required part of ARMv8.2-A, so no additional subtarget features
are required.
Differential Revision: http://reviews.llvm.org/D15018
llvm-svn: 254159
ARMv8.2-A adds a new PSTATE bit, PSTATE.UAO, which allows the LDTR/STTR
instructions to behave the same as LDR/STR with respect to execute-only
pages at higher privilege levels. New variants of the MSR/MRS
instructions are added to allow reading and writing this bit. It is a
required part of ARMv8.2-A, so no additional subtarget features are
required.
Differential Revision: http://reviews.llvm.org/D15020
llvm-svn: 254157
ARMv8.2-A adds the "dc cvap" instruction, which is a system instruction
that cleans caches to the point of persistence (for systems that have
persistent memory). It is a required part of ARMv8.2-A, so no additional
subtarget features are required.
Differential Revision: http://reviews.llvm.org/D15016
llvm-svn: 254156
ARMv8.2-A adds a new ID register, ID_A64MMFR2_EL1, which behaves in the
same way as ID_A64MMFR0_EL1 and ID_A64MMFR1_EL1. It is a required part
of ARMv8.2-A, so no additional subtarget features are required.
Differential Revision: http://reviews.llvm.org/D15017
llvm-svn: 254155
This adds subtarget features for ARMv8.2-A, which builds on (and
requires the features from) ARMv8.1-A. Most assembler-visible features
of ARMv8.2-A are system instructions, and are all required parts of the
architecture, so just depend on the HasV8_2aOps subtarget feature. There
is also one large, optional feature, which adds 16-bit floating point
versions of all existing floating-point instructions (VFP and SIMD),
this is represented by the FeatureFullFP16 subtarget feature.
Differential Revision: http://reviews.llvm.org/D15013
llvm-svn: 254154
Summary:
Many target lowerings copy-paste the code to test SDValues for known constants.
This code can instead be shared in SelectionDAG.cpp, and reused in the targets.
Reviewers: MatzeB, andreadb, tstellarAMD
Subscribers: arsenm, jyknight, llvm-commits
Differential Revision: http://reviews.llvm.org/D14945
llvm-svn: 254085
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes.
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights.
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This the second patch above. In this patch SelectionDAG starts to use
probability-based interfaces in MBB to add successors but other MC passes are
still using weight-based interfaces. Therefore, we need to maintain correct
weight list in MBB even when probability-based interfaces are used. This is
done by updating weight list in probability-based interfaces by treating the
numerator of probabilities as weights. This change affects many test cases
that check successor weight values. I will update those test cases once this
patch looks good to you.
Differential revision: http://reviews.llvm.org/D14361
llvm-svn: 253965
This change merges adjacent zero stores into a wider single store.
For example :
strh wzr, [x0]
strh wzr, [x0, #2]
becomes
str wzr, [x0]
This will fix PR25410.
llvm-svn: 253711
Summary :
* Rename isSmallTypeLdMerge() to isNarrowLoad().
* Rename NumSmallTypeMerged to NumNarrowTypePromoted.
* Use Subtarget defined as a member variable.
llvm-svn: 253587
Rafael Espindola