nullptr is not a valid affine expression, and none of the callers check
for null, so we eventually hit an isl error and crash.
Instead, invalidate the scop and return a constant zero.
Differential Revision: https://reviews.llvm.org/D46445
llvm-svn: 332309
The condition was introduced in r267142 to mitigate a long compile-time
case. In r306087, a max-computation limit was introduced that should
handle the same case while leaving the max disjuncts heuristic it
should have replaced intact.
Today, the max disjuncts bail-out causes problems in that it prematurely
stops SCoPs from being detected, e.g. in SPEC's lbm. This would hit less
like if isl_set_coalesce would be called after isl_set_remove_divs
(which makes more basic_set likely to be coalescable) instead of before.
This patch tries to remove the premature max-disjuncts bail-out
condition by using simple_hull() to reduce the computational overhead,
instead of directly invalidating that SCoP.
Differential Revision: https://reviews.llvm.org/D45066
Contributed-by: Sahil Girish Yerawar <cs15btech11044@iith.ac.in>
llvm-svn: 331891
This reverts commit 0f9dc03765dc301fff7a52e2a0e1dd3e5f3130c5, r328666.
The change introduced a use-after-free, caused by the temporary name string
being destroyed after converting it to a StringRef.
llvm-svn: 331363
These functions have been legacy leftovers which we used before the
official C++ bindings existed. As all uses of these legacy functions
have been removed, this polly-specific extension can also be dropped.
llvm-svn: 331130
Add the options -polly-codegen-trace-stmts and
-polly-codegen-trace-scalars. When enabled, adds a call to the
beginning of every generated statement that prints the executed
statement instance. With -polly-codegen-trace-scalars, it also prints
the value of all scalars that are used in the statement, and PHIs
defined in the beginning of the statement.
Differential Revision: https://reviews.llvm.org/D45743
llvm-svn: 330864
The current statement domain derivation algorithm does not (always)
consider that different exit blocks of a loop can have different
conditions to be reached.
From the code
for (int i = n; ; i-=2) {
if (i <= 0) goto even;
if (i <= 1) goto odd;
A[i] = i;
}
even:
A[0] = 42;
return;
odd:
A[1] = 21;
return;
Polly currently derives the following domains:
Stmt_even_critedge
Domain :=
[n] -> { Stmt_even_critedge[] };
Stmt_odd
Domain :=
[n] -> { Stmt_odd[] : (1 + n) mod 2 = 0 and n > 0 };
while the domain for the odd case is correct, Stmt_even is assumed to be
executed unconditionally, which is obviously wrong. While projecting out
the loop dimension in `adjustDomainDimensions`, it does not consider
that there are other exit condition that have matched before.
I don't know a how to fix this without changing a lot of code. Therefore
This patch rejects loops with multiple exist blocks to fix the
miscompile of test-suite's uuencode.
The odd condition is transformed by LLVM to
%cmp1 = icmp eq i64 %indvars.iv, 1
such that the project_out in adjustDomainDimensions() indeed only
matches for odd n (using this condition only, we'd have an infinite loop
otherwise).
The even condition manifests as
%cmp = icmp slt i64 %indvars.iv, 3
Because buildDomainsWithBranchConstraints() does not consider other exit
conditions, it has to assume that the induction variable will eventually
be lower than 3 and taking this exit.
IMHO we need to reuse the algorithm that determines the number of
iterations (addLoopBoundsToHeaderDomain) to determine which exit
condition applies first. It has to happen in
buildDomainsWithBranchConstraints() because the result will need to
propagate to successor BBs. Currently addLoopBoundsToHeaderDomain() just
look for union of all backedge conditions (which means leaving not the
loop here). The patch in llvm.org/PR35465 changes it to look for exit
conditions instead. This is required because there might be other exit
conditions that do not alternatively go back to the loop header.
Differential Revision: https://reviews.llvm.org/D45649
llvm-svn: 330858
Before this patch, ISL_ASSERT only printed an error message to stderr.
This can be easily missed if the program continues or just fails later.
To fail-early and help error diagnostics (e.g. using bugpoint), call
abort() when an assertion does not hold.
I seem to just have forgotten to add this abort() when I originally
proposed the ISL_ASSERT macro.
Suggested-By: Eli Friedman <efriedma@codeaurora.org>
Differential Revision: https://reviews.llvm.org/D45171
llvm-svn: 330467
Add the switch -polly-debug-func to define the name of a debug
function. This function is ignored for any validity check.
Its purpose is to allow to observe a value after transformation by a
SCoP, and to follow which statements are executed in which order. For
instance, consider the following code:
static void dbg_printf(int sum, int i) {
fprintf(stderr, "The value of sum is %d, i=%d\n", sum, i);
fflush(stderr);
}
void func(int n) {
int sum = 0;
for (int i = 0; i < 16; i+=1) {
sum += i;
dbg_printf(sum, i);
}
}
Executing this after Polly's codegen with -polly-debug-func=dbg_printf
reveals the new execution order and the assumed values at that point of
execution.
Differential Revision: https://reviews.llvm.org/D45728
llvm-svn: 330466
In r330292 this assert was turned incorrectly into an unreachable, but
the correct behavior (thanks Michael) is to assert for anything that is
not 64 bit, but falltrough for 64 bit. I document this in the source
code.
llvm-svn: 330309
Summary:
As of rL329273, LLVM has a mechanism to load new-pm plugins in opt. Use
this API in Polly.
Reviewers: grosser, Meinersbur, bollu
Reviewed By: grosser, Meinersbur
Subscribers: lksbhm, bollu, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D45484
llvm-svn: 330181
A check in assert-builds was meant to verify that a load provides a
value in all statement instances (i.e. its domain). The domain is
commonly gist'ed within the parameter context to contain fewer
constraints. However, statement instances outside the context are
no valid executions, hence the value provided can be undefined.
Refine the check for valid loads to only needed to be defined within
the SCoP context.
In addition, the JSONImporter had to be changed to allow importing
access relations that are broader than the current access relation,
but still defined over all statement instances.
This should fix the compiler crash in test-suite's oggenc of the
-polly-process-unprofitable buildbot.
llvm-svn: 329655
Commit r329640 introduced the removal of all MemoryAccesses of a Scop.
It accidentally continued iterating over a vector whose iterators
have been invalidated by a MemoryAccess removal.
Make a copy of the MemoryAccesses to remove to iterate over while
removing them.
llvm-svn: 329653
Removing a statement left its MemoryAccesses in some lists and maps of
the SCoP. Which lists depends on at which phase of the SCoP
construction the statement is deleted. Follow-up passes could still see
the already deleted MemoryAccesses by iterating through these
lists/maps, resulting in an access violation.
When removing a ScopStmt, also remove all its MemoryAccesses by using
the same mechnism that removes a MemoryAccess.
llvm-svn: 329640
std::remove, despite its name, does not remove elements from a list, but
only moves them to the end of a list. Call erase() to shorten the
vector to the remaining elements.
Test case included in next commit.
llvm-svn: 329639
This patch removes the heuristic in
- Polly :: lib/Support/ScopHelper.cpp
The heuristic forces blocks that directly follow a loop header to not to be considered error blocks.
It was introduced in r249611 with the following commit message:
> This replaces the support for user defined error functions by a
> heuristic that tries to determine if a call to a non-pure function
> should be considered "an error". If so the block is assumed not to be
> executed at runtime. While treating all non-pure function calls as
> errors will allow a lot more regions to be analyzed, it will also
> cause us to dismiss a lot again due to an infeasible runtime context.
> This patch tries to limit that effect. A non-pure function call is
> considered an error if it is executed only in conditionally with
> regards to a cheap but simple heuristic.
In the code below `CCK_Abort2()` would be considered as an error block, but not `CCK_Abort1()` due to this heuristic.
```
for (int i = 0; i < n; i+=1) {
if (ErrorCondition1)
CCK_Abort1(); // No __attribute__((noreturn))
if (ErrorCondition2)
CCK_Abort2(); // No __attribute__((noreturn))
}
```
This does not seem useful. Checking error conditions in the beginning of some work is quite common. It causes a switch default-case to be not considered an error block in SPEC's cactuBSSN. The comment justifying the heuristic mentions a "load", which does not seem to be applicable here. It has been proposed to remove the heuristic.
In addition, the patch fixes the following test cases:
- Polly :: ScopDetect/mod_ref_read_pointer.ll
- Polly :: ScopInfo/max-loop-depth.ll
- Polly :: ScopInfo/mod_ref_access_pointee_arguments.ll
- Polly :: ScopInfo/mod_ref_read_pointee_arguments.ll
- Polly :: ScopInfo/mod_ref_read_pointer.ll
- Polly :: ScopInfo/mod_ref_read_pointers.ll
The test cases failed after removing the heuristic.
Differential Revision: https://reviews.llvm.org/D45274
Contributed-by: Lorenzo Chelini <l.chelini@icloud.com>
llvm-svn: 329548
The warning is:
isl_union_map.c(2041): warning C4221: nonstandard extension used: 'filter_user': cannot be initialized using address of automatic variable 'data'
for the following code (and others)
struct isl_un_op_drop_user_data data = { &isl_set_is_wrapping };
struct isl_un_op_control control = {
.filter = &un_op_filter_drop_user,
.filter_user = &data,
.fn_map = &isl_set_wrapped_domain_map,
};
llvm-svn: 329328
Summary:
When checking the parallelism of a scheduling dimension, we first check if excluding reduction dependences the loop is parallel or not.
If the loop is not parallel, then we need to return the minimal dependence distance of all data dependences, including the previously subtracted reduction dependences.
Reviewers: grosser, Meinersbur, efriedma, eli.friedman, jdoerfert, bollu
Reviewed By: Meinersbur
Subscribers: llvm-commits, pollydev
Tags: #polly
Differential Revision: https://reviews.llvm.org/D45236
llvm-svn: 329214
This gets very expensive for basic blocks which don't have a name: it
calls printAsOperand, which numbers the entire module. We don't
normally need the name anyway, though; it's only used for debug dumps,
so don't compute it by default.
Differential Revision: https://reviews.llvm.org/D44946
llvm-svn: 328666
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Reviewers: grosser, efriedma, jdoerfert, bollu, sebpop
Reviewed By: sebpop
Subscribers: sebpop, mehdi_amini, llvm-commits, pollydev
Tags: #polly
Differential Revision: https://reviews.llvm.org/D44361
llvm-svn: 327361
Piecewise affine expressions have directly corresponding mathematical
operators. Introduce these operators as overloads as this makes writing
code with isl::pw_aff expressions more directly readable.
We can now write:
A = B + C instead of A = B.add(C)
llvm-svn: 327216
isl does not guarantee that set dimension ids will be preserved, so using them
to carry information is not a good idea. Furthermore, the loop information can
be derived without problem from the statement itself. As this even requires
less code than propagating loop information on set dimension ids, starting from
this commit we just derive the loop information in collectSurroundingLoops
directly from the IR.
Interestingly this also results in a couple of isl sets to take a simpler
representation.
llvm-svn: 326664
During codegen, Polly attempts to clear all loops from ScalarEvolution
and LoopInfo, and it does so one block at a time. This causes undefined
behaviour, since this way a loop header might be removed from a loop
before the entire loop is erased, causing ScalarEvolution to run into an
error.
Instead, just delete the entire loop atomically. This fixes currently
failing testcases.
llvm-svn: 326643
Also un-revert (isl_pw_*_alloc: add missing check for compatible spaces, Wed Sep
6 12:18:04 2017 +0200).
This patch is a proposed fix to avoid asserts due to stricter space checking
within isl, which resulted in failures when converting a schedule tree to
a schedule map.
llvm-svn: 326073
As part of this cleanup a couple of unnecessary isl::manage(obj.copy()) pattern
are eliminated as well.
We checked for all potential cleanups by scanning for:
"grep -R isl::manage\( lib/ | grep copy"
llvm-svn: 325558
This update:
- Removes several deprecated functions (e.g., isl_band).
- Improves the pretty-printing of sets by detecting modulos and "false"
equalities.
- Minor improvements to coalescing and increased robustness of the isl
scheduler.
This update does not yet include isl commit isl-0.18-90-gd00cb45
(isl_pw_*_alloc: add missing check for compatible spaces, Wed Sep 6 12:18:04
2017 +0200), as this additional check is too tight and unfortunately causes
two test case failures in Polly. A patch has been submitted to isl and will be
included in the next isl update for Polly.
llvm-svn: 325557
Two or more PHIs mutually using each other directly or indirectly as
incoming value could cause that a PHI WRITE be added before the PHI READ
(i.e. it overwrites the current incoming value with the next incoming
value before it being read).
Fix by ensuring that the PHI WRITE and PHI READ are in the same statement.
This should fix the miscompile of SingleSource/Benchmark/Misc/whetstone
from the test-suite.
llvm-svn: 324934
Splitting basic blocks into multiple statements if there are now
additional scalar dependencies gives more freedom to the scheduler, but
more statements also means higher compile-time complexity. Switch to
finer statement granularity, the additional compile time should be
limited by the number of operations quota.
The regression tests are written for the -polly-stmt-granularity=bb
setting, therefore we add that flag to those tests that break with the
new default. Some of the tests only fail because the statements are
named differently due to a basic block resulting in multiple statements,
but which are removed during simplification of statements without
side-effects. Previous commits tried to reduce this effect, but it is
not completely avoidable.
Differential Revision: https://reviews.llvm.org/D42151
llvm-svn: 324169
Do not add a "_last" suffix to the statement name if there is no (other)
main statement for a basic block. In other words, it becomes the main
statement itself. This further reduces the statement naming difference
between -polly-stmt-granularity=bb and
-polly-stmt-granularity=scalar-indep.
llvm-svn: 324168
Eli Friedman