We do the import of the member enum specialization similarly to as we do
with member CXXRecordDecl specialization.
Differential Revision: https://reviews.llvm.org/D99421
Since the introduction of class properties in Objective-C it is possible to declare a class and an instance
property with the same identifier in an interface/protocol.
Right now Clang just generates debug information for whatever property comes first in the source file.
The second property is ignored as it's filtered out by the set of already emitted properties (which is just
using the identifier of the property to check for equivalence). I don't think generating debug info in this case
was never supported as the identifier filter is in place since 7123bca7fb
(which precedes the introduction of class properties).
This patch expands the filter to take in account identifier + whether the property is class/instance. This
ensures that both properties are emitted in this special situation.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D99512
The `noinline` for non-SPMD parallel functions is probably not necessary
but as long as we use it we should put it on the outermost parallel
function, which is the wrapper, not the actual outlined function.
Resolves PR49752
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D99506
After c773d0f973 the remark is only emitted if the loop is profitable
to vectorize, but cannot be vectorized. Hence, it depends on
X86-specific cost-modeling.
The original issue is caused by the fact that the variable is allocated
with incorrect type i1 instead of i8. This causes the bitcasting of the
declaration to i8 type and the bitcast expression does not match the
original variable.
To fix the problem, the UndefValue initializer and the original
variable should be emitted with type i8, not i1.
Differential Revision: https://reviews.llvm.org/D99297
On z/OS there is a hard limitation on on the maximum requestable alignment in aligned attribute for static variables. We need to truncate values greater than that.
Reviewed By: abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D98864
Need to insert a basic block during generation of the target region to
avoid crash for the GPU to be able always calling a cleanup action.
This cleanup action is required for the correct emission of the target
region for the GPU.
Differential Revision: https://reviews.llvm.org/D99445
This follows GCC and simplifies code. /usr/local/include and TOOL_INCLUDE_DIR
should not conflict with the resource directory include so users should not
observe any difference.
This follows GCC. Having libstdc++/libc++ include paths is not useful
anyway because libstdc++/libc++ header files cannot find features.h.
While here, suppress -stdlib++-isystem with -nostdlibinc.
RVV intrinsics has new overloading rule, please see
82aac7dad4
Changed:
1. Rename `generic` to `overloaded` because the new rule is not using C11 generic.
2. Change HasGeneric to HasNoMaskedOverloaded because all masked operations
support overloading api.
3. Add more overloaded tests due to overloading rule changed.
Differential Revision: https://reviews.llvm.org/D99189
I think byval/sret and the others are close to being able to rip out
the code to support the missing type case. A lot of this code is
shared with inalloca, so catch this up to the others so that can
happen.
Breaking a string literal or a function calls arguments with
AlignConsecutiveDeclarations or AlignConsecutiveAssignments did misalign
the continued line. E.g.:
void foo() {
int myVar = 5;
double x = 3.14;
auto str = "Hello"
"World";
}
or
void foo() {
int myVar = 5;
double x = 3.14;
auto str = "Hello"
"World";
}
Differential Revision: https://reviews.llvm.org/D98214
Adds more information about automated diagnostic reporting for statement
attributes and adds a bit more documentation about statement attributes
in general.
We should have a test verifying / \ for Windows but have such a long
test specifically for Linux cross compilation suffer from Windows \
is too troublesome.
Currently we want to allow calling non-const methods even when only a
shared lock is held, because -Wthread-safety-reference is already quite
sensitive and not all code is const-correct. Even if it is, this might
require users to add std::as_const around the implicit object argument.
See D52395 for a discussion.
Fixes PR46963.
The contents of the string returned by getenv() is not guaranteed across calls to getenv(). The code to handle the CC_PRINT etc env vars calls getenv() and saves the results in just a char *. The string returned by getenv() needs to be copied and saved. Switching the type of the strings from char * to std::string will do this and manage the alloated memory.
Differential Revision: https://reviews.llvm.org/D98554
IR values convert to check prefix FileCheck variables for IR checks. For example, nameless values, e.g., %0, convert to check prefix TMP FileCheck variables, e.g., [[TMP0:%.*]]. This check prefix may clash with named values that have the same name and that causes auto-generated tests to fail. Currently a warning is emitted to change the names of the IR values but this is not always possible, if for example they are generated by clang. Manual intervention to fix the FileCheck variable names is too tedious. This patch add a parameter to prefix conflicting FileCheck variable names with a user-provided string to automate the process.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D99415
Zero length bitfield alignment is not respected if they are leading members on z/OS target.
Reviewed By: abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D98890
This patch should fix the errors shown on the Windows bots by turning off text mode. I plan to investigate a better fix but this should unblock the buildbots for now.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D99363
When emitting a function body there needs to be a instr profiling counter emitted. Otherwise instr profiling won't work for this function.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D98135
tl;dr Correct implementation of Corouintes requires having lifetime intrinsics available.
Coroutine functions are functions that can be suspended and resumed latter. To do so, data that need to stay alive after suspension must be put on the heap (i.e. the coroutine frame).
The optimizer is responsible for analyzing each AllocaInst and figure out whether it should be put on the stack or the frame.
In most cases, for data that we are unable to accurately analyze lifetime, we can just conservatively put them on the heap.
Unfortunately, there exists a few cases where certain data MUST be put on the stack, not on the heap. Without lifetime intrinsics, we are unable to correctly analyze those data's lifetime.
To dig into more details, there exists cases where at certain code points, the current coroutine frame may have already been destroyed. Hence no frame access would be allowed beyond that point.
The following is a common code pattern called "Symmetric Transfer" in coroutine:
```
auto tmp = await_suspend();
__builtin_coro_resume(tmp.address());
return;
```
In the above code example, `await_suspend()` returns a new coroutine handle, which we will obtain the address and then resume that coroutine. This essentially "transfered" from the current coroutine to a different coroutine.
During the call to `await_suspend()`, the current coroutine may be destroyed, which should be fine because we are not accessing any data afterwards.
However when LLVM is emitting IR for the above code, it needs to emit an AllocaInst for `tmp`. It will then call the `address` function on tmp. `address` function is a member function of coroutine, and there is no way for the LLVM optimizer to know that it does not capture the `tmp` pointer. So when the optimizer looks at it, it has to conservatively assume that `tmp` may escape and hence put it on the heap. Furthermore, in some cases `address` call would be inlined, which will generate a bunch of store/load instructions that move the `tmp` pointer around. Those stores will also make the compiler to think that `tmp` might escape.
To summarize, it's really difficult for the mid-end to figure out that the `tmp` data is short-lived.
I made some attempt in D98638, but it appears to be way too complex and is basically doing the same thing as inserting lifetime intrinsics in coroutines.
Also, for reference, we already force emitting lifetime intrinsics in O0 for AlwaysInliner: https://github.com/llvm/llvm-project/blob/main/llvm/lib/Passes/PassBuilder.cpp#L1893
Differential Revision: https://reviews.llvm.org/D99227
These contain clang driver changes for supporting HWASan on Fuchsia.
This includes hwasan multilibs and the dylib path change.
Differential Revision: https://reviews.llvm.org/D99361
Add builtin function __builtin_get_device_side_mangled_name
to get device side manged name for functions and global
variables, which can be used to get symbol address of kernels
or variables by mangled name in dynamically loaded
bundled code objects at run time.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D99301
This code was written back when LLVM's minimum required CMake version
was 2.8.8, and I assume ExternalProject_Add_Step didn't take this option
at that point. It does now though, so we should just use the option.
Setting the _EP_* property is entirely equivalent (and is in fact how
these commands behave internally), but that also feels like an internal
implementation detail we shouldn't be relying on.
Reviewed By: beanz
Differential Revision: https://reviews.llvm.org/D99322
We want installs to be executed even if binaries haven't changed, e.g.
so that we can install to multiple places. This is consistent with how
non-multi-stage install targets (e.g. the regular install-distribution
target) behave.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D99321
`expandedTokens(SourceRange)` used to do a binary search to get the
expanded tokens belonging to a source range. Each binary search uses
`isBeforeInTranslationUnit` to order two source locations. This is
inherently very slow.
By profiling clangd we found out that users like clangd::SelectionTree
spend 95% of time in `isBeforeInTranslationUnit`. Also it is worth
noting that users of `expandedTokens(SourceRange)` majorly use ranges
provided by AST to query this funciton. The ranges provided by AST are
token ranges (starting at the beginning of a token and ending at the
beginning of another token).
Therefore we can avoid the binary search in majority of the cases by
maintaining an index of ExpandedToken by their SourceLocations. We still
do binary search for ranges which are not token ranges but such
instances are quite low.
Performance:
`~/build/bin/clangd --check=clang/lib/Serialization/ASTReader.cpp`
Before: Took 2:10s to complete.
Now: Took 1:13s to complete.
Differential Revision: https://reviews.llvm.org/D99086
Currently, we infer 0 if the divisible of the modulo op is 0:
int a = x < 0; // a can be 0
int b = a % y; // b is either 1 % sym or 0
However, we don't when the op is / :
int a = x < 0; // a can be 0
int b = a / y; // b is either 1 / sym or 0 / sym
This commit fixes the discrepancy.
Differential Revision: https://reviews.llvm.org/D99343
Gabor Marton