Use range instead of xrange whenever possible. The extra list creation in Python2
is generally not a performance bottleneck.
Differential Revision: https://reviews.llvm.org/D56253
llvm-svn: 350309
Make sure all print statements are compatible with Python 2 and Python3 using
the `from __future__ import print_function` statement.
Differential Revision: https://reviews.llvm.org/D56249
llvm-svn: 350307
Calculate which item is being held and then display it with the appropriate type. We also
optimize the display of PointerUnion3 to take advantage of our knowing that the IntMask is
always 1 in PointerUnion types
llvm-svn: 350280
Also add a fuzzer() template for defining fuzzers that's similar to
add_llvm_fuzzer in the CMake build, and a build file for dependency
llvm/lib/FuzzMutate.
Also make `assert(defined(...` error strings a bit more self-consistent.
Differential Revision: https://reviews.llvm.org/D56194
llvm-svn: 350238
These two plugins are loaded into a host process that contains all LLVM
symbols, so they don't link against anything. This required minor readjustments
to the tablegen() setup of IR.
Needed for check-llvm.
Differential Revision: https://reviews.llvm.org/D56204
llvm-svn: 350234
Also add build files for dependencies llvm/lib/ExecutionEngine/{Interpreter,Orc}
Needed for check-llvm.
Differential Revision: https://reviews.llvm.org/D56193
llvm-svn: 350226
Needed for check-llvm.
This is the last target reading llvm_install_binutils_symlinks.
Differential Revision: https://reviews.llvm.org/D56190
llvm-svn: 350215
Also add build file for dependency llvm/lib/XRay.
Needed for check-llvm.
(yaml-bench is an llvm/util, not an llvm/tool.)
Differential Revision: https://reviews.llvm.org/D56163
llvm-svn: 350211
Also add build file for dependency llvm/lib/ExecutionEngine/MCJIT.
The exegesis stuff is pretty hairy and knows a lot about Target internals (in
general, not specifically in the GN build). I put the llvm-tblgen -gen-exegesis
call in llvm/tools/llvm-exegesis/lib/X86, instead of in llvm/lib/Target/X86
where it is in CMake land, and asked on D52932 why it's in that place in the
CMake build.
Needed for check-llvm.
Differential Revision: https://reviews.llvm.org/D56167
llvm-svn: 350184
Also add a build file for clang/lib/ASTMatchers/Dynamic, which is only needed
by tests (and clang/tools/extra).
Also make llvm/utils/gn/build/sync_source_lists_from_cmake.py check that every
CMakeLists.txt file below {lld,clang}/unittests has a corresponding BUILD.gn
file, so we notice if new test binaries get added (since the failure mode for
missing GN build files for tests is just the tests silently not running in the
GN build).
Also add a unittest() macro for defining unit test targets, and add a lengthy
comment there about where the unit test binaries go and why.
With this, the build files for //clang are complete.
Differential Revision: https://reviews.llvm.org/D56116
llvm-svn: 350171
With this, check-clang runs and passes all of clang's lit tests. It doesn't run
any of its unit tests yet.
Like with check-lld, running just ninja -C out/gn will build all prerequisites
needed to run tests, but it won't run the tests (so that the build becomes
clean after one build). Running ninja -C out/gn check-clang will build
prerequisites if needed and run the tests. The check-clang target never becomes
clean and runs tests every time.
Differential Revision: https://reviews.llvm.org/D56095
llvm-svn: 350108
GN wants the NOSORT line to be the first line of a comment block, not the last
line.
I sent https://gn-review.googlesource.com/c/gn/+/3560 to support having it in
the last line too, but since it will be a while until everyone has that change
even if it's expected, use the form that works today.
Differential Revision: https://reviews.llvm.org/D56065
llvm-svn: 350060
libclang is somewhat incomplete. It's just enough to get check-clang to pass,
but that requires it to be pretty complete. The biggest thing is that it's not
built as a shared library on Linux. The libclang/BUILD.gn file has a comment
with details on what else is missing.
Differential Revision: https://reviews.llvm.org/D56059
llvm-svn: 350054
Verified by comparing the output of `otool -P bin/clang` between the GN and the
CMake build.
Differential Revision: https://reviews.llvm.org/D55984
llvm-svn: 349992
The intent is to add the build file for clang/lib/StaticAnalyzer/Frontend; everything else is pulled in by that.
Differential Revision: https://reviews.llvm.org/D55978
llvm-svn: 349986
The check-lld target was missing the dependency on llvm-nm and llvm-objdump in that case.
Differential Revision: https://reviews.llvm.org/D55941
llvm-svn: 349836
Mostly boring, except for the spurious dependency on StaticAnalyzer/Checkers --
see comments in the code.
Differential Revision: https://reviews.llvm.org/D55927
llvm-svn: 349832
Nothing really interesting. One thing to consider is where the clang_tablegen()
invocations that generate files that are private to a library should be. The
CMake build puts them in clang/include/clang/Parse (in this case), but maybe
putting them right in clang/lib/Parse/BUILD.gn makes mor sense. (For
clang_tablegen() calls that generate .inc files used by the public headers,
putting the call in the public BUILD file makes sense.)
For now, I've put the build file in the public header folder, since that
matches CMake and what I did in the last 2 clang patches, but I'm not sure I
like this.
Differential Revision: https://reviews.llvm.org/D55925
llvm-svn: 349831
And add build files for gtest.
With this, the build files for //lld are complete.
Differential Revision: https://reviews.llvm.org/D55838
llvm-svn: 349704
Also add a build file for llvm-lit, which in turn needs llvm/tools/llvm-config.
With this, check-lld runs and passes all of lld's lit tests. It doesn't run any
of its unit tests yet.
Running just ninja -C out/gn will build all prerequisites needed to run tests,
but it won't run the tests (so that the build becomes clean after one build).
Running ninja -C out/gn check-lld will build prerequisites if needed and run
the tests. The check-lld target never becomes clean and runs tests every time.
llvm-config's build file is a bit gnarly: Everything not needed to run tests is
basically stubbed out. Also, to generate LibraryDependencies.inc we shell out
to llvm-build at build-time. It would be much nicer to get the library
dependencies by using the dependency data the GN build contains
(http://llvm-cs.pcc.me.uk/gen/tools/llvm-config/LibraryDependencies.inc#1).
Differential Revision: https://reviews.llvm.org/D55836
llvm-svn: 349702
Adds a build file for clang-tblgen and an action for running it, and uses that
to process all the .td files in include/clang/Basic.
Also adds an action to write include/clang/Config/config.h and
include/clang/Basic/Version.inc.
Differential Revision: https://reviews.llvm.org/D55847
(The previous commit of this contained unrelated changes, so I reverted the
whole previous commit and I'm now landing only what I intended to land.)
llvm-svn: 349679
Adds a build file for clang-tblgen and an action for running it, and uses that
to process all the .td files in include/clang/Basic.
Also adds an action to write include/clang/Config/config.h and
include/clang/Basic/Version.inc.
Differential Revision: https://reviews.llvm.org/D55847
llvm-svn: 349677
This relands r330742:
"""
Let TableGen write output only if it changed, instead of doing so in cmake.
Removes one subprocess and one temp file from the build for each tablegen
invocation.
No intended behavior change.
"""
In particular, if you see rebuilds after this change that you didn't see
before this change, that's unintended and it's fine to revert this change
again (but let me know).
r330742 got reverted because some people reported that llvm-tblgen ran on every
build after it. This could happen if the depfile output got deleted without
deleting the main .inc output. To fix, make TableGen always write the depfile,
but keep writing the main .inc output only if it has changed. This matches what
we did in cmake before.
Differential Revision: https://reviews.llvm.org/D55842
llvm-svn: 349624
Also add build files for deps DebugInfo/Symbolize, ToolDrivers/dll-tool.
Also add gn/build/libs/xar (needed by llvm-objdump).
Also delete an incorrect part of the symlink description in //BUILD.gn (it used
to be true before I made the symlink step write a stamp file; now it's no
longer true).
These are all binaries needed by check-lld that need symlinks.
Differential Revision: https://reviews.llvm.org/D55743
llvm-svn: 349486
Apply final suggestions from probinson for this patch series plus a
few more tweaks:
* Improve various docs, for MatchType in particular.
* Rename some members of MatchType. The main problem was that the
term "final match" became a misnomer when CHECK-COUNT-<N> was
created.
* Split InputStartLine, etc. declarations into multiple lines.
Differential Revision: https://reviews.llvm.org/D55738
Reviewed By: probinson
llvm-svn: 349425
This patch implements annotations for diagnostics reporting CHECK-NOT
failed matches. These diagnostics are enabled by -vv. As for
diagnostics reporting failed matches for other directives, these
annotations mark the search ranges using `X~~`. The difference here
is that failed matches for CHECK-NOT are successes not errors, so they
are green not red when colors are enabled.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- ^~~ marks good match (reported if -v)
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- CHECK-DAG overlapping match (discarded, reported if -vv)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- CHECK-NOT not found (success, reported if -vv)
- CHECK-DAG not found after discarded matches (error)
- ? marks fuzzy match when no match is found
- colors success, error, fuzzy match, discarded match, unmatched input
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -vv -dump-input=always check5 < input5 |& sed -n '/^<<<</,$p'
<<<<<<
1: abcdef
check:1 ^~~
not:2 X~~
2: ghijkl
not:2 ~~~
check:3 ^~~
3: mnopqr
not:4 X~~~~~
4: stuvwx
not:4 ~~~~~~
5:
eof:4 ^
>>>>>>
$ cat check5
CHECK: abc
CHECK-NOT: foobar
CHECK: jkl
CHECK-NOT: foobar
$ cat input5
abcdef
ghijkl
mnopqr
stuvwx
```
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53899
llvm-svn: 349424
This patch implements input annotations for diagnostics reporting
CHECK-DAG discarded matches. These diagnostics are enabled by -vv.
These annotations mark discarded match ranges using `!~~` because they
are bad matches even though they are not errors.
CHECK-DAG discarded matches create another case where there can be
multiple match results for the same directive.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- ^~~ marks good match (reported if -v)
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- CHECK-DAG overlapping match (discarded, reported if -vv)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- CHECK-DAG not found after discarded matches (error)
- ? marks fuzzy match when no match is found
- colors success, error, fuzzy match, discarded match, unmatched input
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -vv -dump-input=always check4 < input4 |& sed -n '/^<<<</,$p'
<<<<<<
1: abcdef
dag:1 ^~~~
dag:2'0 !~~~ discard: overlaps earlier match
2: cdefgh
dag:2'1 ^~~~
check:3 X~ error: no match found
>>>>>>
$ cat check4
CHECK-DAG: abcd
CHECK-DAG: cdef
CHECK: efgh
$ cat input4
abcdef
cdefgh
```
This shows that the line 3 CHECK fails to match even though its
pattern appears in the input because its search range starts after the
line 2 CHECK-DAG's match range. The trouble might be that the line 2
CHECK-DAG's match range is later than expected because its first match
range overlaps with the line 1 CHECK-DAG match range and thus is
discarded.
Because `!~~` for CHECK-DAG does not indicate an error, it is not
colored red. Instead, when colors are enabled, it is colored cyan,
which suggests a match that went cold.
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53898
llvm-svn: 349423
This patch implements input annotations for diagnostics enabled by -v,
which report good matches for directives. These annotations mark
match ranges using `^~~`.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- ^~~ marks good match (reported if -v)
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- ? marks fuzzy match when no match is found
- colors success, error, fuzzy match, unmatched input
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check3 < input3 |& sed -n '/^<<<</,$p'
<<<<<<
1: abc foobar def
check:1 ^~~
not:2 !~~~~~ error: no match expected
check:3 ^~~
>>>>>>
$ cat check3
CHECK: abc
CHECK-NOT: foobar
CHECK: def
$ cat input3
abc foobar def
```
-vv enables these annotations for FileCheck's implicit EOF patterns as
well. For an example where EOF patterns become relevant, see patch 7
in this series.
If colors are enabled, `^~~` is green to suggest success.
-v plus color enables highlighting of input text that has no final
match for any expected pattern. The highlight uses a cyan background
to suggest a cold section. This highlighting can make it easier to
spot text that was intended to be matched but that failed to be
matched in a long series of good matches.
CHECK-COUNT-<num> good matches are another case where there can be
multiple match results for the same directive.
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53897
llvm-svn: 349422
This patch implements input annotations for diagnostics that report
unexpected matches for CHECK-NOT. Like wrong-line matches for
CHECK-NEXT, CHECK-SAME, and CHECK-EMPTY, these annotations mark match
ranges using red `!~~` to indicate bad matches that are errors.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- ? marks fuzzy match when no match is found
- colors error, fuzzy match
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check3 < input3 |& sed -n '/^<<<</,$p'
<<<<<<
1: abc foobar def
not:2 !~~~~~ error: no match expected
>>>>>>
$ cat check3
CHECK: abc
CHECK-NOT: foobar
CHECK: def
$ cat input3
abc foobar def
```
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53896
llvm-svn: 349421
This patch implements input annotations for diagnostics that report
wrong-line matches for the directives CHECK-NEXT, CHECK-SAME, and
CHECK-EMPTY. Instead of the usual `^~~`, which is used by later
patches for good matches, these annotations use `!~~` to mark the bad
match ranges so that this category of errors is visually distinct.
Because such matches are errors, these annotates are red when colors
are enabled.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- ? marks fuzzy match when no match is found
- colors error, fuzzy match
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check2 < input2 |& sed -n '/^<<<</,$p'
<<<<<<
1: foo bar
next:2 !~~ error: match on wrong line
>>>>>>
$ cat check2
CHECK: foo
CHECK-NEXT: bar
$ cat input2
foo bar
```
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53894
llvm-svn: 349420
This patch implements input annotations for diagnostics that suggest
fuzzy matches for directives for which no matches were found. Instead
of using the usual `^~~`, which is used by later patches for good
matches, these annotations use `?` so that fuzzy matches are visually
distinct. No tildes are included as these diagnostics (independently
of this patch) currently identify only the start of the match.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- X~~ marks search range when no match is found
- ? marks fuzzy match when no match is found
- colors error, fuzzy match
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check1 < input1 |& sed -n '/^<<<</,$p'
<<<<<<
1: ; abc def
2: ; ghI jkl
next:3'0 X~~~~~~~~ error: no match found
next:3'1 ? possible intended match
>>>>>>
$ cat check1
CHECK: abc
CHECK-SAME: def
CHECK-NEXT: ghi
CHECK-SAME: jkl
$ cat input1
; abc def
; ghI jkl
```
This patch introduces the concept of multiple "match results" per
directive. In the above example, the first match result for the
CHECK-NEXT directive is the failed match, for which the annotation
shows the search range. The second match result is the fuzzy match.
Later patches will introduce other cases of multiple match results per
directive.
When colors are enabled, `?` is colored magenta. That is, it doesn't
indicate the actual error, which a red `X~~` marker indicates, but its
color suggests it's closely related.
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53893
llvm-svn: 349419
Extend FileCheck to dump its input annotated with FileCheck's
diagnostics: errors, good matches if -v, and additional information if
-vv. The goal is to make it easier to visualize FileCheck's matching
behavior when debugging.
Each patch in this series implements input annotations for a
particular category of FileCheck diagnostics. While the first few
patches alone are somewhat useful, the annotations become much more
useful as later patches implement annotations for -v and -vv
diagnostics, which show the matching behavior leading up to the error.
This first patch implements boilerplate plus input annotations for
error diagnostics reporting that no matches were found for a
directive. These annotations mark the search ranges of the failed
directives. Instead of using the usual `^~~`, which is used by later
patches for good matches, these annotations use `X~~` so that this
category of errors is visually distinct.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the match result for a pattern of type T from line L of
the check file
- X~~ marks search range when no match is found
- colors error
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check1 < input1 |& sed -n '/^Input file/,$p'
Input file: <stdin>
Check file: check1
-dump-input=help describes the format of the following dump.
Full input was:
<<<<<<
1: ; abc def
2: ; ghI jkl
next:3 X~~~~~~~~ error: no match found
>>>>>>
$ cat check1
CHECK: abc
CHECK-SAME: def
CHECK-NEXT: ghi
CHECK-SAME: jkl
$ cat input1
; abc def
; ghI jkl
```
Some additional details related to the boilerplate:
* Enabling: The annotated input dump is enabled by `-dump-input`,
which can also be set via the `FILECHECK_OPTS` environment variable.
Accepted values are `help`, `always`, `fail`, or `never`. As shown
above, `help` describes the format of the dump. `always` is helpful
when you want to investigate a successful FileCheck run, perhaps for
an unexpected pass. `-dump-input-on-failure` and
`FILECHECK_DUMP_INPUT_ON_FAILURE` remain as a deprecated alias for
`-dump-input=fail`.
* Diagnostics: The usual diagnostics are not suppressed in this mode
and are printed first. For brevity in the example above, I've
omitted them using a sed command. Sometimes they're perfectly
sufficient, and then they make debugging quicker than if you were
forced to hunt through a dump of long input looking for the error.
If you think they'll get in the way sometimes, keep in mind that
it's pretty easy to grep for the start of the input dump, which is
`<<<`.
* Colored Annotations: The annotated input is colored if colors are
enabled (enabling colors can be forced using -color). For example,
errors are red. However, as in the above example, colors are not
vital to reading the annotations.
I don't know how to test color in the output, so any hints here would
be appreciated.
Reviewed By: george.karpenkov, zturner, probinson
Differential Revision: https://reviews.llvm.org/D52999
llvm-svn: 349418
When you define an instruction alias as a subclass of InstAlias, you
specify all the MC operands for the instruction it expands to, except
for operands that are tied to a previous one, which you leave out in
the expectation that the Tablegen output code will fill them in
automatically.
But the code in Tablegen's AsmWriter backend that skips over a tied
operand was doing it using 'if' instead of 'while', because it wasn't
expecting to find two tied operands in sequence.
So if an instruction updates a pair of registers in place, so that its
MC representation has two input operands tied to the output ones (for
example, Arm's UMLAL instruction), then any alias which wants to
expand to a special case of that instruction is likely to fail to
match, because the indices of subsequent operands will be off by one
in the generated printAliasInstr function.
This patch re-indents some existing code, so it's clearest when
viewed as a diff with whitespace changes ignored.
Reviewers: fhahn, rengolin, sdesmalen, atanasyan, asb, jholewinski, t.p.northover, kparzysz, craig.topper, stoklund
Reviewed By: rengolin
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D53816
llvm-svn: 349141
This is slightly involved, see the comments in the code.
The GN build now builds a functional lld!
Differential Revision: https://reviews.llvm.org/D55606
llvm-svn: 349096
One of the GCC based bots is objecting to a vector of const EncodingAndInst's:
In file included from /usr/include/c++/8/vector:64,
from /export/users/atombot/llvm/clang-atom-d525-fedora-rel/llvm/utils/TableGen/CodeGenInstruction.h:22,
from /export/users/atombot/llvm/clang-atom-d525-fedora-rel/llvm/utils/TableGen/FixedLenDecoderEmitter.cpp:15:
/usr/include/c++/8/bits/stl_vector.h: In instantiation of 'class std::vector<const {anonymous}::EncodingAndInst, std::allocator<const {anonymous}::EncodingAndInst> >':
/export/users/atombot/llvm/clang-atom-d525-fedora-rel/llvm/utils/TableGen/FixedLenDecoderEmitter.cpp:375:32: required from here
/usr/include/c++/8/bits/stl_vector.h:351:21: error: static assertion failed: std::vector must have a non-const, non-volatile value_type
static_assert(is_same<typename remove_cv<_Tp>::type, _Tp>::value,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/c++/8/bits/stl_vector.h:354:21: error: static assertion failed: std::vector must have the same value_type as its allocator
static_assert(is_same<typename _Alloc::value_type, _Tp>::value,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
llvm-svn: 349046
Summary:
Separate the concept of an encoding from an instruction. This will enable
the definition of additional encodings for the same instruction which can
be used to support variable length instruction sets in the disassembler
(and potentially assembler but I'm not working towards that right now)
without causing an explosion in the number of Instruction records that
CodeGen then has to pick between.
Reviewers: bogner, charukcs
Reviewed By: bogner
Subscribers: kparzysz, llvm-commits
Differential Revision: https://reviews.llvm.org/D52366
llvm-svn: 349041
On Windows, we won't go into the `host_os != "win"` block, so `defines`
won't have been defined, and we'll run into an undefined identifier
error when we try to later append to it. Unconditionally define it at
the start and append to it everywhere else.
Differential Revision: https://reviews.llvm.org/D55617
llvm-svn: 348993
Version.inc.in processing has a potentially interesting part which I've punted
on for now (LLD_REVISION and LLD_REPOSITORY are set to empty strings for now).
lld now builds in the gn build. But no symlinks to it are created yet, so it
can't be meaningfully run yet.
Differential Revision: https://reviews.llvm.org/D55593
llvm-svn: 348945
The diff in targets.gni is due to me running `gn format` on all .gn and .gni
files.
llvm_enable_dia_sdk is in a gni file because I'm going to have to read it when
writing the lit invocations for check-llvm and check-lld. I've never had the
DIA sdk installed locally so I never tested building with it enabled -- it
probably doesn't Just Work and needs some path to diaguids.lib. We can finish
that once somebody needs it.
Differential Revision: https://reviews.llvm.org/D55591
llvm-svn: 348908
The tablegen setup for Target/X86 is a bit different from the CMake build: In
the CMake build, Target/X86/CMakeLists.txt has a single tablegen target that
does everything. But some of the generated files are only used privately by a
subproject, so in the GN build some of the tablegen invocations are
smaller-scoped, mostly for build cleanliness. (It helps also a tiny bit with
build parallelism since now e.g. the cpp files in MCTargetDesc can build after
just 3 .inc files are generated instead of being blocked on all 13. But it's
not a big win, since things depending on Target still need to wait for all 11,
even though all .inc file use is internal to lib/Target.)
Also add a build file for llc, since now all its dependencies have build files.
Differential Revision: https://reviews.llvm.org/D55524
llvm-svn: 348903
has_key has been removed in Python 3. The in comparison operator can be used
instead.
Differential Revision: https://reviews.llvm.org/D55310
llvm-svn: 348576
Tweak write_cmake_config.py to also handle variable references looking @FOO@
(matching CMake's configure_file() function), and make it replace '\' 'n' in
values with a newline literal since there's no good portable way of passing a
real newline literal on a command line.
Use that to process all the .def.in files in llvm/include/Config and add
llvm/lib/Target/BUILD.gn, which (indirectly, through llvm-c/Target.h) includes
them.
Differential Revision: https://reviews.llvm.org/D55184
llvm-svn: 348503
Split timestamp preservation tests into atime and mtime test, and skip
the former on NetBSD. When the filesystem is mounted noatime, NetBSD
not only inhibits implicit atime updates but also prevents setting atime
via utime(), causing the test to fail.
Differential Revision: https://reviews.llvm.org/D55271
llvm-svn: 348354
Summary:
This fixes support in DAGISelMatcher backend for DAG nodes with multiple
result values. Previously the order of results in selected DAG nodes always
matched the order of results in ISel patterns. After the change the order of
results matches the order of operands in OutOperandList instead.
For example, given this definition from the attached test case:
def INSTR : Instruction {
let OutOperandList = (outs GPR:$r1, GPR:$r0);
let InOperandList = (ins GPR:$t0, GPR:$t1);
let Pattern = [(set i32:$r0, i32:$r1, (udivrem i32:$t0, i32:$t1))];
}
the DAGISelMatcher backend currently produces a matcher that creates INSTR
nodes with the first result `$r0` and the second result `$r1`, contrary to the
order in the OutOperandList. The order of operands in OutOperandList does not
matter at all, which is unexpected (and unfortunate) because the order of
results of a DAG node does matters, perhaps a lot.
With this change, if the order in OutOperandList does not match the order in
Pattern, DAGISelMatcherGen emits CompleteMatch opcodes with the order of
results taken from OutOperandList. Backend writers can use it to express
result reorderings in TableGen.
If the order in OutOperandList matches the order in Pattern, the result of
DAGISelMatcherGen is unaffected.
Patch by Eugene Sharygin
Reviewers: andreadb, bjope, hfinkel, RKSimon, craig.topper
Reviewed By: craig.topper
Subscribers: nhaehnle, craig.topper, llvm-commits
Differential Revision: https://reviews.llvm.org/D55055
llvm-svn: 348326
No behavior change, just makes the script match the other scripts in
llvm/utils/gn/build.
Differential Revision: https://reviews.llvm.org/D55183
llvm-svn: 348190
Currently, variadic operands on an MCInst are assumed to be uses,
because they come after the defs. However, this is not always the case,
for example the Arm/Thumb LDM instructions write to a variable number of
registers.
This adds a property of instruction definitions which can be used to
mark variadic operands as defs. This only affects MCInst, because
MachineInstruction already tracks use/def per operand in each instance
of the instruction, so can already represent this.
This property can then be checked in MCInstrDesc, allowing us to remove
some special cases in ARMAsmParser::isITBlockTerminator.
Differential revision: https://reviews.llvm.org/D54853
llvm-svn: 348114
Before, #cmakedefine FOO resulted in #define FOO with a trailing space if FOO
was set to something truthy. Make it so that it's just #define FOO without a
trailing space.
No functional difference.
Differential Revision: https://reviews.llvm.org/D55172
llvm-svn: 348107
Before, the script had a bunch of special cases for #cmakedefine and
#cmakedefine01 and then did general variable substitution. Now, the script
always does general variable substitution for all lines and handles the special
cases afterwards.
This has no observable effect for the inputs we use, but is easier to explain
and slightly easier to implement.
Also mention to link to CMake's configure_file() in the docstring.
(The new behavior doesn't quite match CMake on lines like #cmakedefine ${FOO},
but nobody does that.)
Differential Revision: https://reviews.llvm.org/D55171
llvm-svn: 348106
This adds a script called build.py as well as a lit substitution
called %build that we can use to invoke it. The idea is that
this allows a lit test to build test inferiors without having
to worry about architecture / platform specific differences,
command line syntax, finding / configurationg a proper toolchain,
and other issues. They can simply write something like:
%build --arch=32 -o %t.exe %p/Inputs/foo.cpp
and it will just work. This paves the way for being able to
run lit tests with multiple configurations, platforms, and
compilers with a single test.
Differential Revision: https://reviews.llvm.org/D54914
llvm-svn: 348058
Simple predicates, such as those defined by `CheckRegOperandSimple` or
`CheckImmOperandSimple`, were not being negated when used with `CheckNot`.
This change fixes this issue by defining the previously declared methods to
handle simple predicates.
Differential revision: https://reviews.llvm.org/D55089
llvm-svn: 348034
Summary:
This simplifies writing predicates for pattern fragments that are
automatically re-associated or commuted.
For example, a followup patch adds patterns for fragments of the form
(add (shl $x, $y), $z) to the AMDGPU backend. Such patterns are
automatically commuted to (add $z, (shl $x, $y)), which makes it basically
impossible to refer to $x, $y, and $z generically in the PredicateCode.
With this change, the PredicateCode can refer to $x, $y, and $z simply
as `Operands[i]`.
Test confirmed that there are no changes to any of the generated files
when building all (non-experimental) targets.
Change-Id: I61c00ace7eed42c1d4edc4c5351174b56b77a79c
Reviewers: arsenm, rampitec, RKSimon, craig.topper, hfinkel, uweigand
Subscribers: wdng, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D51994
llvm-svn: 347992
Serge Guelton