test case.
r326290 fixed the assertion for decodeAddend, but not encodeAddend. The
regression test failed to catch this because it was missing the
subsections_via_symbols flag, so the desired relocation was not applied.
This patch also fixes the formatting of the assertion from r326290.
llvm-svn: 326406
Summary:
IMAGE_REL_AMD64_ADDR32NB relocations are currently set to zero in all cases.
This patch sets the relocation to the correct value when possible and shows an error when not.
Reviewers: enderby, lhames, compnerd
Reviewed By: compnerd
Subscribers: LepelTsmok, compnerd, martell, llvm-commits
Differential Revision: https://reviews.llvm.org/D30709
llvm-svn: 325700
These tests assumes availability of external symbols provided by the
C++ library, but those won't be available in case when the C++ library
is statically linked because lli itself doesn't need these.
This uses llvm-readobj -needed-libs to check if C++ library is linked as
shared library and exposes that information as a feature to lit.
Differential Revision: https://reviews.llvm.org/D41272
llvm-svn: 321981
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
We want to be writing a 32bit value, so we should be writing 4 bytes
instead of 2.
Patch by Alex Langford <apl@fb.com>.
Differential Revision: https://reviews.llvm.org/D38872
llvm-svn: 315964
This reverts commit SVN r313668. The original test case attempted to
write a pointer value into 16-bits, although the value may exceed the
range representable in 16-bits. Ensure that the symbol is located in
the address space such that its absolute address is representable in
16-bits. This should fix the assertion failure that was seen on the
Windows hosts.
llvm-svn: 313822
This reverts commit SVN r313654. Seems that it is triggering an
assertion on Windows specifically. Revert until I can build on Windows
and look into what is happening there.
llvm-svn: 313668
Add support for the R_AARCH64_ABS{16,32} relocations in the execution
engine. This is primarily used for DWARF debug information relocations
and needed by the LLVM JIT to support JITing for lldb.
Patch by Alex Langford!
llvm-svn: 313654
Re-committing after r311325 fixed an unintentional use of '#' comments in
clang.
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 311326
The %T lit expansion expands to a common directory shared between all the tests in the same directory, which is unexpected and unintuitive, and more importantly, it's been a source of subtle race conditions and flaky tests. In https://reviews.llvm.org/D35396, it was agreed that it would be best to simply ban %T and only keep %t, which is unique to each test. When a test needs a temporary directory, it can just create one using mkdir %t.
This patch removes %T in llvm.
Differential Revision: https://reviews.llvm.org/D36495
llvm-svn: 310953
This patch adds support for thumb relocations to RuntimeDyldMachOARM, and adds
a target-specific flags field to JITSymbolFlags (so that on ARM we can record
whether each symbol is Thumb-mode code).
RuntimeDyldImpl::emitSection is modified to ensure that stubs memory is
correctly aligned based on the size returned by getStubAlignment().
llvm-svn: 310517
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 310457
I was surprised to see the code model being passed to MC. After all,
it assembles code, it doesn't create it.
The one place it is used is in the expansion of .cfi directives to
handle .eh_frame being more that 2gb away from the code.
As far as I can tell, gnu assembler doesn't even have an option to
enable this. Compiling a c file with gcc -mcmodel=large produces a
regular looking .eh_frame. This is probably because in practice linker
parse and recreate .eh_frames.
In llvm this is used because the JIT can place the code and .eh_frame
very far apart. Ideally we would fix the jit and delete this
option. This is hard.
Apart from confusion another problem with the current interface is
that most callers pass CodeModel::Default, which is bad since MC has
no way to map it to the target default if it actually needed to.
This patch then replaces the argument with a boolean with a default
value. The vast majority of users don't ever need to look at it. In
fact, only CodeGen and llvm-mc use it and llvm-mc just to enable more
testing.
llvm-svn: 309884
The PowerPC part of processRelocationRef currently assumes that external
symbols can be identified by checking for SymType == SymbolRef::ST_Unknown.
This is actually incorrect in some cases, causing relocation overflows to
be mis-detected. The correct check is to test whether Value.SymbolName
is null.
Includes test case. Note that it is a bit tricky to replicate the exact
condition that triggers the bug in a test case. The one included here
seems to fail reliably (before the fix) across different operating
system versions on Power, but it still makes a few assumptions (called
out in the test case comments).
Also add ppc64le platform name to the supported list in the lit.local.cfg
files for the MCJIT and OrcMCJIT directories, since those tests were
currently not run at all.
Fixes PR32650.
Reviewer: hfinkel
Differential Revision: https://reviews.llvm.org/D33402
llvm-svn: 303637
Summary:
Debug info sections, (or non-SHF_ALLOC sections in general) should be
linked as if their load address was zero to emulate the behavior of the
static linker.
This bug was discovered because it was breaking lldb expression evaluation on
linux.
Reviewers: lhames
Subscribers: aprantl, eugene, clayborg, lldb-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D32899
llvm-svn: 303239
This patch implements two GOT relocations:
R_AARCH64_ADR_GOT_PAGE and R_AARCH64_LD64_GOT_LO12_NC
Differential revision: https://reviews.llvm.org/D28571
llvm-svn: 294191
This patch doesn't create thunk for branch operation when following conditions are met:
- Architecture is AArch64
- Relocation target is in the same object file
- Relocation target is close enough to be encoded in immediate offset
In such case we branch directly to the target instead of branching to thunk
Differential revision: https://reviews.llvm.org/D28108
llvm-svn: 291431
Canonicalize all CMake booleans to 0/1 before passing them to lit, to
ensure that the Python side handles all of them consistently
and correctly. 0/1 is a safe choice of values that trigger the same
boolean interpretation in CMake, Python and C++.
Furthermore, using them without quotes improves the chance Python will
explicitly fail when an incorrect value (such as ON/OFF, TRUE/FALSE,
YES/NO) is accidentally passed, rather than silently misinterpreting
the value.
This replaces a lot of different logics spread around lit site files,
attempting to partially reproduce the boolean logic used in CMake
and usually silently failing when an uncommon value was used instead.
In fact, some of them were never working correctly since different
values were assigned in CMake and checked in Python.
The alternative solution could be to create a common parser for CMake
booleans in lit and use it consistently throughout the site files.
However, it does not seem like the best idea to create redundant
implementation of the same logic and have to follow upstream if it ever
is extended to handle more values.
Differential Revision: https://reviews.llvm.org/D28294
llvm-svn: 291284
Summary: The relocation is missing mask so an address that has non-zero bits in 47:43 may overwrite the register number. (Frequently shows up as target register changed to `xzr`....)
Reviewers: t.p.northover, lhames
Subscribers: davide, aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D27609
llvm-svn: 289880
Otherwise we set it always to zero, which is not correct,
and we assert inside alignTo (Assertion failed:
Align != 0u && "Align can't be 0.").
Differential Revision: https://reviews.llvm.org/D26173
llvm-svn: 285841
These tests rely on two sections being allocated with a limited displacement
from one to the other to work. We've never guaranteed this, and consequently
these tests usually fail. That led to them being XFAILed, but now they XPASS
whenever the sections do happen to be allocated nearby in memory. So I'm
removing these for now to get rid of the noise. We can re-instate them if/when
we take the time to implement a displacement-respecting allocator.
llvm-svn: 284654
Summary:
This adds the necessary logic to support relocations to thumb functions in the COFF dynamic linker.
The jumps to function addresses are mostly blx, which requires the ISA selection bit when jumping to a thumb function.
Note: I'm determining if the relocation requires the ISA bit when creating the relocation entries and not when resolving the relocation. I have to do that because I need the ObjectFile and the actual Symbol, which are available only when creating the entries. It would require a gross refactor if I do it otherwise, but I'm okay with doing it if you think it's better.
Reviewers: peter.smith, compnerd
Subscribers: rengolin, sas
Differential Revision: https://reviews.llvm.org/D25151
llvm-svn: 284410
According to the arm arm specifications, 4 bytes are needed for a shift instead
of 8, this was causing the movt instruction to write to a different register
sometimes.
Patch by Walter Erquinigo!
llvm-svn: 280005
This patch causes RuntimeDyld to check for existing definitions when it
encounters weak symbols. If a definition already exists then the new weak
definition is discarded. All symbol lookups within a "logical dylib" should now
agree on the address of any given weak symbol. This allows the JIT to better
match the behavior of the static linker for C++ code.
This support is only partial, as it does not allow strong definitions that
occur after the first weak definition (in JIT symbol lookup order) to override
the previous weak definitions. Support for this will be added in a future
patch.
llvm-svn: 278065
It breaks ExecutionEngine/OrcLazy/weak-function.ll on most bots.
Script:
--
...
--
Exit Code: 1
Command Output (stderr):
--
Could not find main function.
llvm-svn: 277907
This adds partial support for weak functions to the CompileOnDemandLayer by
modifying the addLogicalModule method to check for existing stub definitions
before building a new stub for a weak function. This scheme is sufficient to
support ODR definitions, but fails for general weak definitions if strong
definition is encountered after the first weak definition. (A more extensive
refactor will be required to fully support weak symbols).
This patch does *not* add weak symbol support to RuntimeDyld: I hope to add
that in the near future.
llvm-svn: 277896
Lang Hames