PowerPC ISA support the input test for vector type v4f32 and v2f64.
Replace the software compare with hw test will improve the perf.
Reviewed By: ChenZheng
Differential Revision: https://reviews.llvm.org/D90914
Fix bogus diagnostics that would get confused and think a "no viable
fuctions" case was an "undeclared identifiers" case, resulting in an
incorrect diagnostic preceding the correct one. Use overload resolution
to determine which function we should select when we can find call
candidates from a dependent base class. Make the diagnostics for a call
that could call a function from a dependent base class more specific,
and use a different diagnostic message for the case where the call
target is instead declared later in the same class. Plus some minor
diagnostic wording improvements.
This reverts commit 3b18a594c7, since
apparently this doesn't work everywhere. E.g.,
clang-x86_64-debian-fast/3889
(http://lab.llvm.org:8011/#/builders/109/builds/3889) gives me:
```
+ : 'RUN: at line 8'
+ /b/1/clang-x86_64-debian-fast/llvm.obj/bin/clang -x c /dev/fd/0 -E
+ cat /b/1/clang-x86_64-debian-fast/llvm.src/clang/test/Misc/dev-fd-fs.c
fatal error: file '/dev/fd/0' modified since it was first processed
1 error generated.
```
llvm-link should not rely on the '.a' file extension when deciding if input file
should be loaded as archive. Archives may have other extensions (f.e. .lib) or no
extensions at all. This patch changes llvm-link to use llvm::file_magic to check
if input file is an archive.
Reviewed By: RaviNarayanaswamy
Differential Revision: https://reviews.llvm.org/D92376
Remove compilicated logic from CompilerInstance::InitializeSourceManager
to deal with named pipes, updating FileManager::getBufferForFile to
handle it in a more straightforward way. The existing test at
clang/test/Misc/dev-fd-fs.c covers the new behaviour (just like it did
the old behaviour).
Differential Revision: https://reviews.llvm.org/D90733
Extract remote debugging logic from PlatformMacOSX and move it into
PlatformRemoteMacOSX so it can benefit from all the logic necessary for
remote debugging.
Until now, remote macOS debugging was treated almost identical to local
macOS debugging. By moving in into its own class, we can have it inherit
from PlatformRemoteDarwinDevice and all the functionality it provides,
such as looking at the correct DeviceSupport directory.
rdar://68167374
Differential revision: https://reviews.llvm.org/D92452
While I was adding a new intrinsic instruction (not overloaded), I accidentally used CreateUnaryIntrinsic to create the intrinsics, which turns out to be passing the type list to getName, and ended up naming the intrinsics function with type suffix, which leads to wierd bugs latter on. It took me a long time to debug.
It seems a good idea to add an assertion in getName so that it fails if types are passed but it's not a overloaded function.
Also, the overloade version of getName is less efficient because it creates an std::string. We should avoid calling it if we know that there are no types provided.
Differential Revision: https://reviews.llvm.org/D92523
llvm-link should not rely on the '.a' file extension when deciding if input file
should be loaded as archive. Archives may have other extensions (f.e. .lib) or no
extensions at all. This patch changes llvm-link to use llvm::file_magic to check
if input file is an archive.
Reviewed By: RaviNarayanaswamy
Differential Revision: https://reviews.llvm.org/D92376
As part of reducing use of PreprocessorOptions::RemappedFileBuffers,
stop abusing it to pass information around remapped files in
`ARCMigrate`. This simplifies an eventual follow-up to switch to using
an `InMemoryFileSystem` for this.
Differential Revision: https://reviews.llvm.org/D90887
In ScopedString::append va_list ArgsCopy is created but never cleanuped
which can lead to undefined behaviour, like stack corruption.
Reviewed By: cryptoad
Differential Revision: https://reviews.llvm.org/D92383
Instead of computing the alignment and size of the `char` buffer in
`AlignedCharArrayUnion`, rely on the math in `std::aligned_union_t`.
Because some users of this rely on the `buffer` field existing with a
type convertible to `char *`, we can't change the field type, but we can
still avoid duplicating the logic.
A potential follow up would be to delete `AlignedCharArrayUnion` after
updating its users to use `std::aligned_union_t` directly; or if we like
our template parameters better, could update users to stop peeking
inside and then replace the definition with:
```
template <class T, class... Ts>
using AlignedCharArrayUnion = std::aligned_union_t<1, T, Ts...>;
```
Differential Revision: https://reviews.llvm.org/D92500
This is useful for debugging why lld loads .o files it shouldn't load.
It's also useful for users of lld -- I've used ld64's version of this a
few times.
Differential Revision: https://reviews.llvm.org/D92496
When the same generic name is use-associated from two modules, the
generics are merged into a single one in the current scope. This change
fixes some bugs in that process.
When a generic is merged, it can have two specific procedures with the
same name as the generic (c.f. module m7c in modfile07.f90). We were
disallowing that by checking for duplicate names in the generic rather
than duplicate symbols. Changing `namesSeen` to `symbolsSeen` in
`ResolveSpecificsInGeneric` fixes that.
We weren't including each USE of those generics in the .mod file so in
some cases they were incorrect. Extend GenericDetails to specify all
use-associated symbols that are merged into the generic. This is used to
write out .mod files correctly.
The distinguishability check for specific procedures of a generic
sometimes have to refer to procedures from a use-associated generic in
error messages. In that case we don't have the source location of the
procedure so adapt the message to say where is was use-associated from.
This requires passing the scope through the checks to make that
determination.
Differential Revision: https://reviews.llvm.org/D92492
`AlignedArrayCharUnion` is now using `alignas`, which is properly
supported now by all the host toolchains we support. As a result, the
extra `alignas` on `IntervalMap` isn't needed anymore.
This is effectively a revert of 379daa2974.
Differential Revision: https://reviews.llvm.org/D92509
Revert "Delete llvm::is_trivially_copyable and CMake variable HAVE_STD_IS_TRIVIALLY_COPYABLE"
This reverts commit 4d4bd40b57.
This reverts commit 557b00e0af.
LLVM has TLS_(base_)addr32 for 32-bit TLS addresses in 32-bit mode, and
TLS_(base_)addr64 for 64-bit TLS addresses in 64-bit mode. x32 mode wants 32-bit
TLS addresses in 64-bit mode, which were not yet handled. This adds
TLS_(base_)addrX32 as copies of TLS_(base_)addr64, except that they use
tls32(base)addr rather than tls64(base)addr, and then restricts
TLS_(base_)addr64 to 64-bit LP64 mode, TLS_(base_)addrX32 to 64-bit ILP32 mode.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D92346
Since x32 supports PC-relative address, it shouldn't use EBX for TLS
address. Instead of checking N.getValueType(), we should check
Subtarget->is32Bit(). This fixes PR 22676.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D16474
Push `FileEntryRef` and `DirectoryEntryRef` further, using it them
`Module::Umbrella`, `Module::Header::Entry`, and
`Module::DirectoryName::Entry`.
- Add `DirectoryEntryRef::operator const DirectoryEntry *` and
`OptionalDirectoryEntryRefDegradesToDirectoryEntryPtr`, to get the
same "degrades to `DirectoryEntry*` behaviour `FileEntryRef` enjoys
(this avoids a bunch of churn in various clang tools).
- Fix the `DirectoryEntryRef` constructor from `MapEntry` to take it by
`const&`.
Note that we cannot get rid of the `...AsWritten` names leveraging the
new classes, since these need to be as written in the `ModuleMap` file
and the module directory path is preprended for the lookup in the
`FileManager`.
Differential Revision: https://reviews.llvm.org/D90497
An indirect call site needs to be probed for its potential call targets. With CSSPGO a direct call also needs a probe so that a calling context can be represented by a stack of callsite probes. Unlike pseudo probes for basic blocks that are in form of standalone intrinsic call instructions, pseudo probes for callsites have to be attached to the call instruction, thus a separate instruction would not work.
One possible way of attaching a probe to a call instruction is to use a special metadata that carries information about the probe. The special metadata will have to make its way through the optimization pipeline down to object emission. This requires additional efforts to maintain the metadata in various places. Given that the `!dbg` metadata is a first-class metadata and has all essential support in place , leveraging the `!dbg` metadata as a channel to encode pseudo probe information is probably the easiest solution.
With the requirement of not inflating `!dbg` metadata that is allocated for almost every instruction, we found that the 32-bit DWARF discriminator field which mainly serves AutoFDO can be reused for pseudo probes. DWARF discriminators distinguish identical source locations between instructions and with pseudo probes such support is not required. In this change we are using the discriminator field to encode the ID and type of a callsite probe and the encoded value will be unpacked and consumed right before object emission. When a callsite is inlined, the callsite discriminator field will go with the inlined instructions. The `!dbg` metadata of an inlined instruction is in form of a scope stack. The top of the stack is the instruction's original `!dbg` metadata and the bottom of the stack is for the original callsite of the top-level inliner. Except for the top of the stack, all other elements of the stack actually refer to the nested inlined callsites whose discriminator field (which actually represents a calliste probe) can be used together to represent the inline context of an inlined PseudoProbeInst or CallInst.
To avoid collision with the baseline AutoFDO in various places that handles dwarf discriminators where a check against the `-pseudo-probe-for-profiling` switch is not available, a special encoding scheme is used to tell apart a pseudo probe discriminator from a regular discriminator. For the regular discriminator, if all lowest 3 bits are non-zero, it means the discriminator is basically empty and all higher 29 bits can be reversed for pseudo probe use.
Callsite pseudo probes are inserted in `SampleProfileProbePass` and a target-independent MIR pass `PseudoProbeInserter` is added to unpack the probe ID/type from `!dbg`.
Note that with this work the switch -debug-info-for-profiling will not work with -pseudo-probe-for-profiling anymore. They cannot be used at the same time.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D91756
At D92261, this type will be used to cache both combined shadow and
converted shadow values.
Reviewed-by: morehouse
Differential Revision: https://reviews.llvm.org/D92458
This patch implements correct hostness based overloading resolution
in isBetterOverloadCandidate.
Based on hostness, if one candidate is emittable whereas the other
candidate is not emittable, the emittable candidate is better.
If both candidates are emittable, or neither is emittable based on hostness, then
other rules should be used to determine which is better. This is because
hostness based overloading resolution is mostly for determining
viability of a function. If two functions are both viable, other factors
should take precedence in preference.
If other rules cannot determine which is better, CUDA preference will be
used again to determine which is better.
However, correct hostness based overloading resolution
requires overloading resolution diagnostics to be deferred,
which is not on by default. The rationale is that deferring
overloading resolution diagnostics may hide overloading reslolutions
issues in header files.
An option -fgpu-exclude-wrong-side-overloads is added, which is off by
default.
When -fgpu-exclude-wrong-side-overloads is off, keep the original behavior,
that is, exclude wrong side overloads only if there are same side overloads.
This may result in incorrect overloading resolution when there are no
same side candates, but is sufficient for most CUDA/HIP applications.
When -fgpu-exclude-wrong-side-overloads is on, enable deferring
overloading resolution diagnostics and enable correct hostness
based overloading resolution, i.e., always exclude wrong side overloads.
Differential Revision: https://reviews.llvm.org/D80450
Android has a handful of API levels relevant to developers described
here: https://developer.android.com/studio/build#module-level.
`__ANDROID_API__` is too vague and confuses a lot of people. Introduce
a new macro name that is explicit about which one it represents. Keep
the old name around because code has been using it for a decade.
Summary:
Not all system assembler supports `.uleb128 label2 - label1` form.
When the target do not support this form, we have to take
alternative manual calculation to get the offsets from them.
Reviewed By: hubert.reinterpretcast
Diffierential Revision: https://reviews.llvm.org/D92058
This is consistent with other platforms' versions and
eliminates a compiler warning.
Reviewed By: leonardchan
Differential Revision: https://reviews.llvm.org/D92442
Craig Topper