Previously we emit two or more identical definitions for an
exported symbol if the same /export option is given more than
once. This patch fixes that bug.
llvm-svn: 218433
This patch is difficult to test in isolation, so a subsequent patch will test
further.
Patch by Daniel Stewart <stewartd@codeaurora.org>!
Phabricator Revision: http://reviews.llvm.org/D5377
llvm-svn: 218418
lib.exe prints a warning if a symbol in a module definition file has
both the PRIVATE attribute and an ordinal like this.
EXPORTS
foo @1 PRIVATE
This patch suppresses that.
llvm-svn: 218395
Currently you can omit the leading underscore from exported
symbol name. LLD will look for mangled name for you. But it won't
look for C++ mangled name.
This patch is to support that.
If "sym" is specified to be exported, the linker looks for not
only "sym", but also "_sym" and "?sym@@<whatever>", so that you
can export a C++ function without decorating it.
llvm-svn: 218355
Exported symbol name resolution is two-pass. In the first pass,
we try to resolve that as a regular undefined symbol. If it fails,
we look for mangled name for the symbol and rename the undefined
symbol and try again.
After all name resolution is done, we look for an atom for each
exported symbol again, to construct the export table. In this
process we try the regular names first, and then try mangled names.
But at this moment we should have knew which name is correct.
This patch is to keep the information we get in the first process
to use it later.
llvm-svn: 218354
The export table descriptor is a data structure to keep information
about the export table. It contains a symbol name, and the name may
or may not be mangled.
We need unmangled names for the export table, so we demangle them
before writing them to the export table.
Obviously this is not a correct round-trip conversion. That could
drop a leading underscore from a symbol because that's
indistinguishable from a mangled name.
What we need to do is to keep unmangled names. This patch does that.
llvm-svn: 218345
/machine:ebc was previously recognized but rejected. Unknown architecture
names were handled differently but eventually rejected too. We don't need
to distinguish them.
llvm-svn: 218344
This patch changes the type of export table set from std::set to
std::vector. The new code is slightly inefficient, but because
export table elements are actually mutable, std::vector is better
here. No functionality change.
llvm-svn: 218343
If two or more /export options are given for the same symbol, we should
always print a warning message and use the first one regardless of other
parameters.
Previously there was a case that the first parameter is not used.
llvm-svn: 218342
A symbol in a module definition file may be annotated with the
PRIVATE keyword like this.
EXPORTS
func PRIVATE
The PRIVATE keyword does not affect the resulting .dll file.
But it prevents the symbol to be listed in the .lib (import
library) file.
llvm-svn: 218273
Patch from Rafael Auler!
When a shared lib has an undefined symbol that is defined in a regular object
(the program), the final executable must export this symbol in the dynamic
symbol table. However, in the current logic, lld only puts the symbol in the
dynamic symbol table if the symbol is weak. This patch fixes lld to put the
symbol in the dynamic symbol table regardless if it is weak or not.
This caused a problem in FreeBSD10, whose programs link against a crt1.o
that defines the symbol __progname, which is, in turn, undefined in libc.so.7
and will only be resolved in runtime.
http://reviews.llvm.org/D5424
llvm-svn: 218259
llvm\tools\lld\lib\readerwriter\macho\macholinkingcontext.cpp(647):
warning C4715: 'lld::MachOLinkingContext::exportSymbolNamed' :
not all control paths return a value
llvm\tools\lld\lib\readerwriter\macho\machonormalizedfilefromatoms.cpp(723):
warning C4715: '`anonymous namespace'::Util::getSymbolTableRegion' :
not all control paths return a value
While all enum values do appear in the switch, an uninitialized or corrupted
enum variable would not be caught without the default: case in the switch.
llvm-svn: 218197
Atoms are ordered in the output file by ordinal. File has file ordinal,
and atom has atom ordinal which is unique within the file.
No two atoms should have the same combination of ordinals.
However that contract was not satisifed for alias atoms. Alias atom
is defined by /alternatename:sym1=sym2. In this case sym1 is defined
as an alias for sym2. sym1 always got ordinal 0.
As a result LLD failed with an assertion failure.
This patch assigns ordinal to alias atoms.
llvm-svn: 218158
Cache the machine type value of the linking context. We need this in order to
calculate the virtual address of the atom when resolving function symbols.
Windows on ARM must check if the atom is a function and if so, set the Thumb bit
for the returned virtual address. Failure to do so will result in an abnormal
exit due to a trap caused by invalid instruction decoding. The same information
can be used to determine the relocation type that was previously being done via
is64 to select between x86 and x86_64.
llvm-svn: 218106
Accept /machine:arm as an argument. This is changed to support ARM NT.
Although there is no way to differentiate between ARM (Windows CE) and ARM NT
(Windows on ARM), since LLVM currently only supports Windows on ARM, simply take
/machine:arm to mean Windows on ARM.
llvm-svn: 218105
Rather than saving whether we are targeting 64-bit x86 (x86_64), simply convert
the single use of that information to the actual relocation type. This will
permit the selection of non-x86 relocation types (e.g. for WoA support).
Inline the access of the machine type field as it is relatively cheap (a couple
of pointer dereferences) rather than storing the relocation type as a member
variable.
llvm-svn: 218104
When we encounter an unknown machine type, we print out the machine type magic.
However, we would print out the magic in decimal rather than hex. Perform this
conversion to make it easier to identify what machine is unsupported.
llvm-svn: 218103
This patch fixes a forbidden use of Twine. It should only be used
as an intermediary value, but never stored.
This caused a bug in lld when running on Linux and compiled with
optimizations - it couldn't properly search libs.
Patch from Rafael Auler!
llvm-svn: 218083
I made LLD to report an error if /safeseh:no option is given on x64,
but it turned out MSVC link.exe doesn't report error on it.
Removing the check.
llvm-svn: 218077
The contents from section .CRT$XLA to .CRT$XLZ is an array of function
pointers. They are called by the runtime when a new thread is created
or (gracefully) terminated.
You can make your own initialization function to be called by that
mechanism. All you have to do is:
- Define a pointer to a function in a .CRT$XL* section using pragma
- Make an external reference to "__tls_used" symbol
That technique is used in many projects. This patch is to support that.
What this patch does is to set the relative virtual address of
"__tls_used" to the PECOFF directory table. __tls_used is actually a
struct containing pointers to a symbol in .CRT$XLA and another symbol
in .CRT$XLZ. The runtime looks at the directory table, gets the address
of the struct, and call the function pointers between XLA and XLZ.
llvm-svn: 218007
On darwin, the linker tools records which dylib (DSO) each undefined was found
in, and then at runtime, the loader (dyld) only looks in that one specific
dylib for each undefined symbol. Now that llvm-objdump can display that info
I can write test cases.
llvm-svn: 217898
The provided base must also be a multiple of the system's page size, which is a
reasonable enough demand.
Also check the other diagnostics more thoroughly.
llvm-svn: 217577
The existing system linkers on Darwin and Linux are called "ld". We'd like to
eventually drop in lld as "ld" and have it just work. But lld is a universal
linker that requires the first option to be -flavor to know which command line
mode to emulate (gnu or darwin).
This change tests if argv[0] is "ld" and if so, if the tool was built on MacOSX
then assume the darwin flavor otherwise the gnu flavor. There are two test
cases which copy lld to "ld" and then run it. One for darwin and one for linux.
llvm-svn: 217566
lld shouldn't directly use the COFF header nor should it use raw
coff_symbols. Instead, query the header properties from the
COFFObjectFile and use COFFSymbolRef to abstractly reference COFF
symbols.
This is just enough to get lld compiling with the changes to
llvm::object. Bigobj specific testing will come later.
Differential Revision: http://reviews.llvm.org/D5280
llvm-svn: 217497
Most of the changes are in the new file ArchHandler_arm64.cpp. But a few
things had to be fixed to support 16KB pages (instead of 4KB) which iOS arm64
requires. In addition the StubInfo struct had to be expanded because
arm64 uses two instruction (ADRP/LDR) to load a global which requires two
relocations. The other mach-o arches just needed one relocation.
llvm-svn: 217469
There is a bit (MH_PIE) in the flags field of the mach_header which tells
the kernel is a program was built position independent (for ASLR). The linker
automatically attempts to build programs PIE if they are built for a recent
OS version. But the -pie and -no_pie options override that default behavior.
llvm-svn: 217408