There's a regression in here due to inability to combine fneg inputs of X86ISD::FMSUB/FNMSUB/FNMADD nodes.
More removals to come, but I wanted to stop and fix the regression that showed up in this first.
llvm-svn: 336303
Legalize and emit code for round & convert float128 to double precision and
single precision.
Differential Revision: https://reviews.llvm.org/D46997
llvm-svn: 336299
CRC and GINV ASE require revision 6, Virtualization requires revision 5.
Print a warning when revision is older than required.
Differential Revision: https://reviews.llvm.org/D48843
llvm-svn: 336296
We want to run the Machine Scheduler instead of the List Scheduler after RA.
Checked with a performance run on a Power 9 machine with SPEC 2006 and while
some benchmarks improved and others degraded the geomean was slightly improved
with the Machine Scheduler.
Differential Revision: https://reviews.llvm.org/D45265
llvm-svn: 336295
We were only doing this for basic blends, despite shuffle lowering now being good enough to handle more complex blends. This means that the two v8i16 splat shifts are performed in parallel instead of serially as the general shift case.
Reapplied with a fixed (extra null tests) version of rL336113 after reversion in rL336189 - extra test case added at rL336247.
llvm-svn: 336250
The following code pattern:
mov %rax, %rcx
test %rax, %rax
%rax = ....
je throw_npe
mov(%rcx), %r9
mov(%rax), %r10
gets transformed into the following incorrect code after implicit null check pass:
mov %rax, %rcx
%rax = ....
faulting_load_op("movl (%rax), %r10", throw_npe)
mov(%rcx), %r9
For implicit null check pass, if the register that is checked for null value (ie, the register used in the 'test' instruction) is written into before the condition jump, we should avoid doing the optimization.
Patch by Surya Kumari Jangala!
Differential Revision: https://reviews.llvm.org/D48627
Reviewed By: skatkov
llvm-svn: 336241
D48768 may turn some of these into shifts.
Reviewers: spatel
Reviewed By: spatel
Subscribers: spatel, RKSimon, llvm-commits, craig.topper
Differential Revision: https://reviews.llvm.org/D48767
llvm-svn: 336224
This might make the error message added in r335668 unneeded, but I'm not sure yet.
The check for RIP is technically unnecessary since RIP is in GR64, but that fact is kind of surprising so be explicit.
llvm-svn: 336217
r336120 resulted in falling back to SelectionDAG more often due to the G_STORE
MMOs not matching the vreg size. This fixes that by explicitly any-extending the
value.
llvm-svn: 336209
Lower more than 4 arguments using stack. This patch targets MIPS32.
It supports only functions with arguments of type i32.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D47934
llvm-svn: 336185
LLVM doesn't guarantee anything about the high bits of a register holding
an i1 value at the IR level, so don't translate LLVM IR i1 values directly
into WebAssembly conditional branch operands. WebAssembly's conditional
branches do demand all 32 bits be valid.
Fixes PR38019.
llvm-svn: 336138
Add registers still missing after r328016 (D43353):
- for bits 15-8 of SI, DI, BP, SP (*H), and R8-R15 (*BH),
- for bits 31-16 of R8-R15 (*WH).
Thanks to Craig Topper for pointing it out.
llvm-svn: 336134
Similarily, don't fold fp128 loads into SSE instructions if the load isn't aligned. Unless we're targeting an AMD CPU that doesn't check alignment on arithmetic instructions.
Should fix PR38001
llvm-svn: 336121
We currently don't any-extend vararg parameters before storing them to the stack
locations on Darwin. However, SelectionDAG however does this, and so user code
is in the wild which inadvertently relies on this extension. This can manifest
in cases where the value stored is (int)0, but the actual parameter is interpreted
by va_arg as a pointer, and so not extending to 64 bits causes the callee to
load additional undefined bits.
llvm-svn: 336120
We were only doing this for basic blends, despite shuffle lowering now being good enough to handle more complex blends. This means that the two v8i16 splat shifts are performed in parallel instead of serially as the general shift case.
llvm-svn: 336113
We have special case support for 2 shift values for basic blends, but irregular shift patterns end up using the generic lowering, despite shuffle lowering being good enough to handle more complex blends.
llvm-svn: 336112
This change fixes the issue that arises when we duplicate condition from
the predecessor block. If the condition's arguments are not considered alive
across the blocks, fast regalloc gets confused and starts generating reloads
from the slots that have never been spilled to. This change also leads to
smaller code given that, unlike on architectures with condition codes, on
Mips we can branch directly on register value, thus we gain nothing by
duplication.
Patch by Dragan Mladjenovic.
Differential Revision: https://reviews.llvm.org/D48642
llvm-svn: 336084
For the below case, pre-inc prep think it's a good candidate to use pre-inc for the bucket, but 64bit integer load/store update (pre-inc) instruction on Power requires the displacement field should be DS-form (4's multiple). Since it can't satisfy the constraint, we have to do some fix ups later. As below, the original load/stores could be well-form, it makes things worse.
unsigned long long result = 0;
unsigned long long foo(char *p, unsigned long long n) {
for (unsigned long long i = 0; i < n; i++) {
unsigned long long x1 = *(unsigned long long *)(p - 50000 + i);
unsigned long long x2 = *(unsigned long long *)(p - 61024 + i);
unsigned long long x3 = *(unsigned long long *)(p - 62048 + i);
unsigned long long x4 = *(unsigned long long *)(p - 64096 + i);
result *= x1 * x2 * x3 * x4;
}
return result;
}
Patch by jedilyn(Kewen Lin).
Differential Revision: https://reviews.llvm.org/D48813
--This line, and those below, will be ignored--
M lib/Target/PowerPC/PPCLoopPreIncPrep.cpp
A test/CodeGen/PowerPC/preincprep-i64-check.ll
llvm-svn: 336074
Summary:
This patch introduce new intrinsic -
strip.invariant.group that was described in the
RFC: Devirtualization v2
Reviewers: rsmith, hfinkel, nlopes, sanjoy, amharc, kuhar
Subscribers: arsenm, nhaehnle, JDevlieghere, hiraditya, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47103
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
llvm-svn: 336073
The combine added in commit 329525 overlooked the case where one, but not all, of the divisor elements is -1, -1 is the only power of two value for which the sdiv expansion recipe breaks.
Thanks to @zvi for the original patch.
Differential Revision: https://reviews.llvm.org/D45806
llvm-svn: 336048
Especially of note was the test_mm_mask_set1_epi64 and other set1 tests that were truncating the element to be broadcasted to i8 and broadcasting that instead of a whole 64 bit value.
Some of the others were just correcting mask sizes on parameters due to bugs in the clang test case they were generated from that have now been fixed.
Some were converting i8 to <4 x i1>/<2 x i1> by truncating to i4/i2 and then bitcasting. But the clang codegen is bitcast to <8 x i1>, then extract to <4 x i1>/<2 x i1>. This is likely to incur less trouble from the integer type legalizer in the backend.
llvm-svn: 336045
Summary:
We could split sizes that are not power of two into smaller sized
G_IMPLICIT_DEF instructions, but this ends up generating
G_MERGE_VALUES instructions which we then have to handle in the instruction
selector. Since G_IMPLICIT_DEF is really a no-op it's easier just to
keep everything that can fit into a register legal.
Reviewers: arsenm
Reviewed By: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, rovka, kristof.beyls, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48777
llvm-svn: 336041
This adds functionality to the outliner that allows targets to
specify certain functions that should be outlined from by default.
If a target supports default outlining, then it specifies that in
its TargetOptions. In the case that it does, and the user hasn't
specified that they *never* want to outline, the outliner will
be added to the pass pipeline and will run on those default functions.
This is a preliminary patch for turning the outliner on by default
under -Oz for AArch64.
https://reviews.llvm.org/D48776
llvm-svn: 336040
Summary:
After rL335727, (sdiv X, 1) is treated as a special case, so we can
safely transform 'sdiv's in non-splat pow vectors into 'shr's even when
some of its entries are '1'. The test expectations have been already
fixed in rL335771, but the comments were out of date.
Also changed the filename from `vector_sdiv.ll` to `vector-sdiv.ll` to
be consistent with other test file names.
Reviewers: RKSimon
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D48692
llvm-svn: 336018
This was introducing unnecessary padding after the explicit
arguments, depending on the alignment of the total struct type.
Also has the side effect of avoiding creating an extra GEP for
the offset from the base kernel argument to the explicit kernel
argument offset.
llvm-svn: 335999
The important part is the creation of the SHLD/SHRD nodes. The compare and the conditional move can use target independent nodes that can be legalized on their own. This gives some opportunities to trigger the optimizations present in the lowering for those things. And its just better to limit the number of places we emit target specific nodes.
The changed test cases still aren't optimal.
Differential Revision: https://reviews.llvm.org/D48619
llvm-svn: 335998
This allows to hoist code portion to compute reciprocal of loop
invariant denominator in integer division after codegen prepare
expansion.
Differential Revision: https://reviews.llvm.org/D48604
llvm-svn: 335988
This is a recommit of r335887, which was erroneously committed earlier.
To enable the MachineOutliner by default on AArch64, we need to be able to
disable the MachineOutliner and also provide an option to "always" enable the
outliner.
This adds that capability. It allows the user to still use the old
-enable-machine-outliner option, which defaults to "always". This is building
up to allowing the user to specify "always" versus the target default
outlining behaviour.
https://reviews.llvm.org/D48682
llvm-svn: 335986
This uses the same technique as for shifts - split the rotation into 4/2/1-bit partial rotations and select those partials based on the amount bit, making use of PBLENDVB if available. This halves the use of PBLENDVB compared to expanding to shifts, which can be a slow op.
Unfortunately I haven't found a decent way to share much of this code with the shift equivalent.
Differential Revision: https://reviews.llvm.org/D48655
llvm-svn: 335957
This is a recommit of r335879.
We shouldn't add the outliner when compiling at -O0 even if
-enable-machine-outliner is passed in. This makes sure that we
don't add it in this case.
This also removes -O0 from the outliner DWARF test.
llvm-svn: 335930
This fixes a regression since SVN r334523, where the object files
built targeting MinGW were rejected by GNU binutils tools. Prior to
that commit, we only put constants in comdat for MSVC configurations.
Differential Revision: https://reviews.llvm.org/D48567
llvm-svn: 335918
This is a follow up to r335753. At the time I forgot about isProfitableToFold which makes this pretty easy.
Differential Revision: https://reviews.llvm.org/D48706
llvm-svn: 335895
Reverting because this is causing failures in the LLDB test suite on
GreenDragon.
LLVM ERROR: unsupported relocation with subtraction expression, symbol
'__GLOBAL_OFFSET_TABLE_' can not be undefined in a subtraction
expression
llvm-svn: 335894
Craig Topper