than being given the pthread_mutex_t from the Mutex and locks that. That allows us to
track ownership of the Mutex better.
Used this to switch the LLDB_CONFIGURATION_DEBUG enabled assert when we can't get the
gdb-remote sequence mutex to assert when the thread that had the mutex releases it. This
is generally more useful information than saying just who failed to get it (since the
code that had it locked often had released it by the time the assert fired.)
llvm-svn: 158240
TestBackticksWithoutATarget.BackticksWithNoTargetTestCase was calling
GetDummyTarget() when executing for x86_64. When performing session
tearDown, it would get destroyed (and everything would be invalid (arch,
etc).
Then the test would run for i386. The dummy target wasn't being
reinitialized and was invalid. lldb complained that 'current process state
is unsuitable for expression parsing'.
llvm-svn: 156994
"lldb -a i386" doesn't set the calculator mode correctly if run on a 64 bit system.
The previous logic always used the current host architecture, not the default architecture. The default arch gets set into a static varaible in lldb_private::Target when an arch is set from the command line:
lldb -a i386
We now use the default arch correctly.
llvm-svn: 156680
On Lion, because the rights initially doesn't exist in /etc/authorization, if an admin user logs in and uses lldb within the first 5 minutes, it is possible to do AuthorizationCopyRights on LaunchUsingXPCRightName and get the rights back. As another security measure, we make sure that the LaunchUsingXPCRightName rights actually exists.
Removed Xcode as the user of the XPC service to shrink the security surface area.
llvm-svn: 156424
We make sure that if the user cancels out of the authentication dialog to add 'com.apple.lldb.LaunchUsingXPC' rights to /etc/authorization, we don't try to do AuthorizationCopyRights.
As well, refactored a bit so that control flow is easier to read for other folks. Added more comments.
llvm-svn: 156423
No one was using it and Locker(pthread_mutex_t *) immediately asserts for
pthread_mutex_t's that don't come from a Mutex anyway. Rather than try to make
that work, we should maintain the Mutex abstraction and not pass around the
platform implementation...
Make Mutex::Locker::Lock take a Mutex & or a Mutex *, and remove the constructor
taking a pthread_mutex_t *. You no longer need to call Mutex::GetMutex to pass
your mutex to a Locker (you can't in fact, since I made it private.)
llvm-svn: 156221
Rework the Host.cpp::ThreadNameAccessor to use ThreadSafeSTLMap - we've got it so we might as well use it. Also works around a problem with the
Mutex::Locker class raising fallacious asserts in debug mode when used with pthread_mutex_t's that weren't backed by Mutex objects.
llvm-svn: 156193
Error
Host::RunShellCommand (const char *command,
const char *working_dir,
int *status_ptr,
int *signo_ptr,
std::string *command_output_ptr,
uint32_t timeout_sec);
This will allow us to use this functionality in the host lldb_private::Platform, and also use it in our lldb-platform binary. It leverages the existing code in Host::LaunchProcess and ProcessLaunchInfo.
llvm-svn: 154730
Cleaned up the Mutex::Locker and the ReadWriteLock classes a bit.
Also cleaned up the GDBRemoteCommunication class to not have so many packet functions. Used the "NoLock" versions of send/receive packet functions when possible for a bit of performance.
llvm-svn: 154458
nanoseconds in 32-bit expression would cause pthread_cond_timedwait
to time out immediately. Add explicit casts to the TimeValue::TimeValue
ctor that takes a struct timeval and change the NanoSecsPerSec etc
constants defined in TimeValue to be uint64_t so any other calculations
involving these should be promoted to 64-bit even when lldb is built
for 32-bit.
<rdar://problem/11204073>, <rdar://problem/11179821>, <rdar://problem/11194705>.
llvm-svn: 154250
spin up a temporary "private state thread" that will respond to events from the lower level process plugins. This check-in should work to do
that, but it is still buggy. However, if you don't call functions on the private state thread, these changes make no difference.
This patch also moves the code in the AppleObjCRuntime step-through-trampoline handler that might call functions (in the case where the debug
server doesn't support the memory allocate/deallocate packet) out to a safe place to do that call.
llvm-svn: 154230
Made sure that the root XPC service validate the right before starting the service. The right is created and authenticated by clients (in this case, lldb) and transferred over for validiation.
llvm-svn: 152802
shouldn't compile any of the XPC support code.
Update macosx/Host.mm to use that define.
Add a LLDB_DISABLE_PYTHON ifdef block around a new function in
Core/FormatManager.cpp.
<rdar://problem/10942125>
llvm-svn: 152293
"desktop" - build all binaries with XPC
"desktop_no_xcp" - build all binaries with none of the XPC binaries
"ios" - build all binaries with special iOS install settings.
Bumped the Xcode project build version for lldb-118 and debugserver-169.
llvm-svn: 151740
so that we don't break it with code changes.
After doing this I was able to fix the POSIX-DYLD plug-in so that it builds
after recent ModuleSpec changes.
llvm-svn: 151536
more of the local path, platform path, associated symbol file, UUID, arch,
object name and object offset. This allows many of the calls that were
GetSharedModule to reduce the number of arguments that were used in a call
to these functions. It also allows a module to be created with a ModuleSpec
which allows many things to be specified prior to any accessors being called
on the Module class itself.
I was running into problems when adding support for "target symbol add"
where you can specify a stand alone debug info file after debugging has started
where I needed to specify the associated symbol file path and if I waited until
after construction, the wrong symbol file had already been located. By using
the ModuleSpec it allows us to construct a module with as little or as much
information as needed and not have to change the parameter list.
llvm-svn: 151476
Added a dedicated platform for the iOS simulator. This helps us to find the
correct files for a simulator binary before running and helps us select the
right arch (i386 only) for files when we load them.
llvm-svn: 151436
Tracking modules down when you have a UUID and a path has been improved.
DynamicLoaderDarwinKernel no longer parses mach-o load commands and it
now uses the memory based modules now that we can load modules from memory.
Added a target setting named "target.exec-search-paths" which can be used
to supply a list of directories to use when trying to look for executables.
This allows one or more directories to be used when searching for modules
that may not exist in the SDK/PDK. The target automatically adds the directory
for the main executable to this list so this should help us in tracking down
shared libraries and other binaries.
llvm-svn: 150426
o Symbols.cpp:
Emit a warning message when dSYM does not match the binary.
o warnings/uuid:
Added regression test case.
o lldbtest.py:
Modified to allow test case writer to demand that the build command does not begin
with a clean first; required to make TestUUIDMismatchWanring.py work.
rdar://problem/10515708
llvm-svn: 149465
watching for errors from pthread_mutex_destroy () (usually "Resource
busy" errors for when you have a mutex locked and try to destroy
it), and pthread_mutex_lock, and pthread_mutex_unlock (usually for
trying to lock an invalid mutex that might have possible already
been freed).
llvm-svn: 149135
mmap() the entire object file contents into memory with MAP_PRIVATE.
We do this because object file contents can change on us and currently
this helps alleviate this situation. It also make the code for accessing
object file data much easier to manage and we don't end up opening the
file, reading some data and closing the file over and over.
llvm-svn: 148017
a new POSIX platform. It also contains fixes for 64bit FreeBSD.
The patch is based on changes by Mark Peek <mp@FreeBSD.org> and
"K. Macy" <kmacy@freebsd.org> in their github repo located at
https://github.com/fbsd/lldb.
llvm-svn: 147609
so that we don't have "fprintf (stderr, ...)" calls sprinkled everywhere.
Changed all needed locations over to using this.
For non-darwin, we log to stderr only. On darwin, we log to stderr _and_
to ASL (Apple System Log facility). This will allow GUI apps to have a place
for these error and warning messages to go, and also allows the command line
apps to log directly to the terminal.
llvm-svn: 147596
Be better at detecting when DWARF changes and handle this more
gracefully than asserting and exiting.
Also fixed up a bunch of system calls that weren't properly checking
for EINTR.
llvm-svn: 147559
size_t
SBProcess::ReadCStringFromMemory (addr_t addr, void *buf, size_t size, lldb::SBError &error);
uint64_t
SBProcess::ReadUnsignedFromMemory (addr_t addr, uint32_t byte_size, lldb::SBError &error);
lldb::addr_t
SBProcess::ReadPointerFromMemory (addr_t addr, lldb::SBError &error);
These ReadCStringFromMemory() has some SWIG type magic that makes it return the
python string directly and the "buf" is not needed:
error = SBError()
max_cstr_len = 256
cstr = lldb.process.ReadCStringFromMemory (0x1000, max_cstr_len, error)
if error.Success():
....
The other two functions behave as expteced. This will make it easier to get integer values
from the inferior process that are correctly byte swapped. Also for pointers, the correct
pointer byte size will be used.
Also cleaned up a few printf style warnings for the 32 bit lldb build on darwin.
llvm-svn: 146636
will allow us to represent a process/thread ID using a pointer for the OS
plug-ins where they might want to represent the process or thread ID using
the address of the process or thread structure.
llvm-svn: 145644
the thread specific data and were destroying the thread specfic data more
than once.
Also added the ability to ask a lldb::StateType if it is stopped with an
additional paramter of "must_exist" which means that the state must be a
stopped state for a process that still exists. This means that eStateExited
and eStateUnloaded will no longer return true if "must_exist" is set to true.
llvm-svn: 144875
After recent changes we weren't reaping child processes resulting in many
zombie processes.
This was fixed by adding more settings to the ProcessLaunchOptions class
that allow clients to specify a callback function and baton to be notified
when their process dies. If one is not supplied a default callback will be
used that "does the right thing".
Cleaned up a race condition in the ProcessGDBRemote class that would attempt
to monitor when debugserver died.
Added an extra boolean to the process monitor callbacks that indicate if a
process exited or not. If your process exited with a zero exit status and no
signal, both items could be zero.
Modified the process monitor functions to not require a callback function
in order to reap the child process.
llvm-svn: 144780
info for us to attach by pid, or by name and will also allow us to eventually
do a lot more powerful attaches. If you look at the options for the "platform
process list" command, there are many options which we should be able to
specify. This will allow us to do things like "attach to a process named 'tcsh'
that has a parent process ID of 123", or "attach to a process named 'x' which
has an effective user ID of 345".
I finished up the --shell implementation so that it can be used without the
--tty option in "process launch". The "--shell" option now can take an
optional argument which is the path to the shell to use (or a partial name
like "sh" which we will find using the current PATH environment variable).
Modified the Process::Attach to use the new ProcessAttachInfo as the sole
argument and centralized a lot of code that was in the "process attach"
Execute function so that everyone can take advantage of the powerful new
attach functionality.
llvm-svn: 144615
the --tty option. So you can now get shell expansion and file redirection:
(lldb) process launch --tty --shell -- *.jpg < in.txt > out.txt
Again, the "--tty" is mandatory for now until we hook this up to other
functions. The shell is also currently hard coded to "/bin/bash" and not the
"SHELL" variable. "/bin/tcsh" was causing problems which I need to dig into.
llvm-svn: 144443
string to avoid possible later crashes.
Modified the locations that do set the crash description to NULL out the
string when they are done doing their tasks.
llvm-svn: 144297
Sean Callanan