We had some #ifdefs that were looking for the wrong #defines and as a result
debugserver didn't have support for certain simulators. This patch resolves
the problem.
llvm-svn: 258365
at each public stop to improve performance a bit. Most of the
information lldb needed was already in the jThreadsInfo response;
complete that information and catch a few cases where we could still
fall back to getting the information via discrete memory reads.
debugserver adds 'associated_with_dispatch_queue' and 'dispatch_queue_t
keys to the jThreadsInfo response for all the threads. lldb needs the
dispatch_queue_t value. And associated_with_dispatch_queue helps to
identify which threads definitively don't have any queue information so
lldb doesn't try to do memory reads to get that information just because
it was absent in the jThreadsInfo response.
Remove the queue information from the questionmark (T) packet. We'll
get the information for all threads via the jThreadsInfo response -
sending the information for the stopping thread (on all the private
stops, plus the less frequent public stop) was unnecessary information
being sent over the wire.
SystemRuntimeMacOSX will try to get information about queues by asking
the Threads for them, instead of reading memory.
ProcessGDBRemote changes to recognize the new keys being sent in the
jThreadsInfo response. Changes to ThreadGDBRemote to track the new
information. Also, when a thread is marked as definitively not
associated with a libdispatch queue, don't fall back to the system
runtime to try memory reads to find the queue name / kind / ID etc.
<rdar://problem/23309359>
llvm-svn: 257453
keys before we print the libdispatch queues keys (qname, qkind, qserialnum)
to make it easier to read the packet by hand. No function difference, just
reordering the keys in the output.
llvm-svn: 257229
"qserial" to "qserialnum" because "qserial" looks a lot like the
queue type (either 'serial' or 'concurrent') and can be confusing
to read through. debugserver passes these up either in the questionmark
("T") packet, or in the response to the jThreadsInfo packet.
llvm-svn: 257121
This patch adds support the command 'source info' as follows:
(lldb) help source info
Display source line information (as specified) based on the current executable's
debug info.
Syntax: source info <cmd-options>
Command Options Usage:
source info [-c <count>] [-s <shlib-name>] [-f <filename>] [-l <linenum>] [-e <linenum>]
source info [-c <count>] [-s <shlib-name>] [-n <symbol>]
source info [-c <count>] [-a <address-expression>]
-a <address-expression> ( --address <address-expression> )
Lookup the address and display the source information for the corresponding
file and line.
-c <count> ( --count <count> )
The number of line entries to display.
-e <linenum> ( --end-line <linenum> )
The line number at which to stop displaying lines.
-f <filename> ( --file <filename> )
The file from which to display source.
-l <linenum> ( --line <linenum> )
The line number at which to start the displaying lines.
-n <symbol> ( --name <symbol> )
The name of a function whose source to display.
-s <shlib-name> ( --shlib <shlib-name> )
Look up the source in the given module or shared library (can be specified
more than once).
For example:
(lldb) source info --file x.h
Lines for file x.h in compilation unit x.cpp in `x
[0x0000000100000d00-0x0000000100000d10): /Users/dawn/tmp/./x.h:10
[0x0000000100000d10-0x0000000100000d1b): /Users/dawn/tmp/./x.h:10
The new options are used to fix the MI command:
-symbol-list-lines <file>
which didn't work for header files because it called:
target modules dump line-table <file>
which only dumps line tables for a compilation unit.
The patch also fixes a bug in the error reporting when no files were supplied to the command. Previously you'd get:
(lldb) target modules dump line-table
error:
Syntax:
error: no source filenames matched any command arguments
Now you get:
error: file option must be specified.
Reviewed by: clayborg, jingham, ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D15593
llvm-svn: 256863
debugserver. thread-pcs has a comma separated list of base 16
addresses - the current pc value for every thread in the process.
It is a partner of the "threads:" key where a list of thread IDs
is given. The pc values in thread-pcs correspond one-to-one with
the thread IDs in the threads list.
This is a part of performance work. When lldb is instruction
stepping / fast stepping over a range of addresses for e.g. a "next"
command, and it steps in to another function, lldb will put a
breakpoint on the return address and continue the process. Before
it calls continue, it calls Thread::SetupForResume on all the
threads, and SetupForResume needs to get the current pc value for
every thread to see if any are at a breakpoint site.
The result is that issuing a "c" continue requires that we send
"read pc register" packets for every thread.
We may do this sequence of step-into-function / continue-to-get-out
many times for a single user-visible "next" or "step" command, and
with highly multithreaded programs, we are sending many extra
packets to get all the thread values.
I looked at including this data in the "jstopinfo" JSON that
we already have in the T packet. But there are three problems that
would make this increase the size of the T packet significantly.
First, numbers in JSON are base 10. Second, a proper JSON would
have something like "thread_pcs": { "34224331112":383772734222, ...}
for thread-id 34224331112 and pc 383772734222 - so we're including
a whole extra copy of the thread id in addition to the pc. Third,
the JSON text is hex-ascii'fied so the size of it is doubled.
In one example,
threads:585db8,585dc7,585dc8,585dc9,585dca,585dce;thread-pcs:100001400,7fff8badc6de,7fff8badcff6,7fff8badc6de,7fff8badc6de,7fff8badc6de;
The "thread-pcs" adds 86 characters - 136 characters for both
threads and thread-pcs. Doing this in JSON would look like
threads={"5791160":4294972416,"5791175":140735536809694,"5791176":140735536812022,"5791177":140735536809694,"5791178":140735536809694,"5791182":140735536809694}
or 160 characters -- or 320 characters once it is hex-asciified.
Given that it's 86 characters vrs 320, I went with the old style
approach. I've seen real world programs that have up to 60 threads
in them, so this could result in vastly larger packets if it
was all done in the JSON with hex-ascii expansion.
If we had an all-JSON T packet, where we didn't need to hex-ascii
encode anything, that would have been the better approach. But
we'd already have a list of threads in JSON at that point so
the additional text wouldn't be too bad.
I'm working on finishing the patches to lldb to use this data;
will commit those once I've had a chance to test them more. But
I wanted to commit the debugserver bits which are more
straightforward.
<rdar://problem/21963031>
llvm-svn: 255711
include two stack frames worth of unwind information instead of
just one -- the unwinder is trying to fetch two stack frames in
more instances now and we're sending extra memory reads resulting
in a performance degredation while stepping.
llvm-svn: 255417
The standard remote debugging workflow with gdb is to start the
application on the remote host under gdbserver (e.g.: gdbserver :5039
a.out) and then connect to it with gdb.
The same workflow is supported by debugserver/lldb-gdbserver with a very
similar syntax but to access all features of lldb we need to be
connected also to an lldb-platform instance running on the target.
Before this change this had to be done manually with starting a separate
lldb-platform on the target machine and then connecting to it with lldb
before connecting to the process.
This change modifies the behavior of "platform connect" with
automatically connecting to the process instance if it was started by
the remote platform. With this command replacing gdbserver in a gdb
based worflow is usually as simple as replacing the command to execute
gdbserver with executing lldb-platform.
Differential revision: http://reviews.llvm.org/D14952
llvm-svn: 255016
Allow both '-var-list-children var0' and '-var-list-children "var0"' to be used with the -var-list-children command. GDB MI allows for this and it is necessary if the variable name contains spaces, such as var5.std::_Vector_base<std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::allocator<std::basic_string<char, std::char_traits<char>, std::allocator<cahr> > > >.
Differential Revision: http://reviews.llvm.org/D15168
llvm-svn: 254941
Summary: This diff approaches building the project natively on NetBSD with the autoconf/gmake framework.
Patch by Kamil Rytarowski. Thanks!
Reviewers: emaste, clayborg
Subscribers: tberghammer, joerg, brucem, lldb-commits
Differential Revision: http://reviews.llvm.org/D14531
llvm-svn: 253153
Summary:
These changes are still incomplete, but we are almost there.
Changes:
- CMake and gmake code
- SWIG code
- minor code additions
Reviewers: emaste, joerg
Subscribers: youri, akat1, brucem, lldb-commits, joerg
Differential Revision: http://reviews.llvm.org/D14042
llvm-svn: 252403
is running under System Integrity Protection on
Mac OS X 10.11. The rootless_allows_task_for_pid() spi
(see debugserver RNBRemote.cpp) is the final SPI that
is used for this - should add support for that too at
some point.
llvm-svn: 252228
Let the editor also clean up whitespace for that file.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13816
llvm-svn: 251979
Summary:
As per the following link, the "--" separator can appear between the options
and parameters of any MI command. Previously this separator was only
handled by the `-data-disassemble` MI command. I have moved the relevant
code into `CMICmdBase` so that any MI command can handle the
aforementioned separator.
https://sourceware.org/gdb/onlinedocs/gdb/GDB_002fMI-Input-Syntax.html#GDB_002fMI-Input-Syntax
Reviewers: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14197
llvm-svn: 251793
Summary:
I observed that eclipse was passing --thread-group for many other commands
then we are currently handling. Looking at the MI documentation, the
following link states that each MI command accept the --thread and
--frame option. Looking at the GDB implementation, it seems that apart
from these 2, --thread-group is also handled the same way.
https://sourceware.org/gdb/onlinedocs/gdb/Context-management.html#Context-management
So instead of handling those arguments in every comamnds, I have moved
them into the base class and removed them from elsewhere. Now any command
can use these arguments. The patch seems big but most of the changes are
mechanical.
Reviewers: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14177
llvm-svn: 251636
A variable of type:
struct S {
union {
int i1;
unsigned u1;
};
union {
int i2;
unsigned u2;
};
};
had been impossible to evaluate in lldb-mi, because MI assigns '??' as the
variable name to each of the unnamed unions after "-var-list-children" command.
Also '??' incorrectly goes to 'exp' field which is treated by IDE as a
structure field name and is displayed in watch window.
The patch fixes this returning empty string as type name for unnamed union and
assigning $N to variable name, where N is the field number in the parent entity.
Patch from evgeny.leviant@gmail.com
Reviewed by: clayborg, abidh
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13947
llvm-svn: 251176
This fixes the OSX build for XCode versions older than 7 by skipping
references to LC_VERSION_MIN_TVOS and LC_VERSION_MIN_WATCHOS if
TARGET_OS_TV or TARGET_OS_WATCH aren't defined.
Reviewed by: jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14036
llvm-svn: 251172
Summary:
These changes aren't everything what is needed for the CMake target, but it's significantly approaching it.
These changes shouldn't effect the build process on other platforms.
Patch by Kamil Rytarowski, thanks!
Reviewers: joerg, brucem
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13711
llvm-svn: 251164
previous release. Most of the diffs are duplication in the xcode
project file caused by adding a "debugserver-mini" target. Jim
Ingham added support for a new SPI needed to request app launches
on iOS. Greg Clayton added code to indicate the platform of the
binary (macosx, ios, watchos, tvos) based on Mach-O load commands.
Jason Molenda added code so debugserver will identify when it is
running on a tvos/watchos device to lldb.
llvm-svn: 251091
Previously, lldb did not use type summaries for simple types with no children
(like function pointers). This patch enables MI to use lldb type summaries for
evaluation of all types of objects, so MI own formatters are no longer needed.
Patch from evgeny.leviant@gmail.com
Reviewed by: abidh
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13799
llvm-svn: 251082
This makes LLDB launch and create a REPL, specifying no target so that the REPL
can create one for itself. Also added the "--repl-language" option, which
specifies the language to use. Plumbed the relevant arguments and errors
through the REPL creation mechanism.
llvm-svn: 250773
In r248047, I attempted to fix a build breakage introduced by using
llvm's regex support from lldb-mi. However, my approach was flawed
when LLVM and lldb are dynamically linked, in which case two copies
of LLVMSupport would end up in memory, causing crashes on lldb start up.
Instead, use LINK_COMPONENTS to make sure lldb-mi has access to the
LLVMSupport symbols without causing duplication in the dynamic library
case.
llvm-svn: 250751
Summary:
Add dependencies to the custom commands so that they get
re-executed as needed.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13580
llvm-svn: 249860
Summary:
This is Darwin only.
The symbol defined by ${LLDB_VERS_GENERATED_FILE} is used by
source/lldb.cpp, so anything that uses lldb.cpp (which is in
lldbBase) should also have the generated symbol. This means
that the entire process can be centralized within source/CMakeLists.txt
where lldbBase is constructed.
Additionally, the custom command should have dependencies on the
project file as well as the generation script so that if either
changes, the version file is correctly re-generated and everything
is re-linked appropriately.
* cmake/LLDBDependencies.cmake: Remove everything related to
the generated version file from here.
* source/CMakeLists.txt: On Darwin, add the generated version
file to the sources that make up lldbBase. Also, create a
custom target and make lldbBase depend on it to re-generate
the generated file as needed.
* source/API/CMakeLists.txt: Don't need to build the generated
version file here or use it to control linking against swig_wrapper.
* tools/lldb-server/CMakeLists.txt: Likewise.
Reviewers: dawn, sas, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13552
llvm-svn: 249806
If a string contained characters outside the ASCII range, lldb-mi would
print them as hexadecimal codes. This patch fixes this behaviour by
converting to UTF-8 instead, by having lldb-mi use registered type
summary providers, when they are available. This patch also fixes
incorrect evaluation of some composite types, like std::string, by
having them use a type registered type summary provider.
Based on patch from evgeny.leviant@gmail.com
Reviewed by: ki.stfu, granata.enrico, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13058
llvm-svn: 249597
This patch adds a --start option to the lldb-mi -exec-run command for
getting process stopped at entry point after launch. It is equivelent
to the -s option in the lldb command line interpreter:
process launch -s
and is therefore not supported on all hosts and/or targets. To check
if the --start option is supported, see if the corresponding feature
"exec-run-start-option" is in the list of options reported by the lldb-mi
"-list-features" command.
Patch from engineer.developer@gmail.com (Kirill Lapshin)
Reviewed by: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12977
llvm-svn: 249072
Fix assignment operator in CMIUtilString to not crash the debugger if it
is passed a NULL pointer, which can happen in code like the following:
SBValue val;
CMIUtilString s;
//...
s = val.GetSummary();
Patch from evgeny.leviant@gmail.com
Reviewed by: clayborg, ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13094
llvm-svn: 248597
Summary:
Following on from r247991:
pthread is in LLDB_SYSTEM_LIBS so there's no need to explicitly add it to the link.
Reviewers: labath
Subscribers: lldb-commits, labath, krytarowski
Differential Revision: http://reviews.llvm.org/D12964
llvm-svn: 248177
Summary:
This switches the decision as to whether or not to lldb-server should
be built to check the same flag that was added that controls whether
or not it is added as a dependency to the 'lldb' target.
It also sets that flag on FreeBSD to maintain parity with the existing
build configuration / situation on FreeBSD.
Reviewers: labath, emaste, tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12925
llvm-svn: 247913
This fixes -data-info-line and -symbol-list-lines to parse the filename
and line correctly when line entries don't have the optional column
number and the filename contains a Windows drive letter. It also fixes
-symbol-list-lines when code from header files is generated.
Reviewed by: abidh, ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12115
llvm-svn: 247899
ninja lldb now does the following:
* forces the python post-build step to fire, which sets up the python lldb module properly.
* on Darwin and Linux, requires the lldb-server target to be built.
* on Darwin, requires the debugserver target to be built.
See http://reviews.llvm.org/D12899 for details.
llvm-svn: 247810
debugserver to match. "gcc" is now "ehframe" and "gdb" is now
"debugserver". Because this is debugserver, what we call the Process
Plugin register numbers up in lldb are the debugserver register
numbers down here - they are the register numbers that debugserver
will use to refer to these registers over the gdb-remote protocol.
debugserver was already reporting the registers with the key
"ehframe"; this change is just cleaning up the internal variable
names to match.
llvm-svn: 247751
"gcc" register numbers are now correctly referred to as "ehframe"
register numbers. In almost all cases, ehframe and dwarf register
numbers are identical (the one exception is i386 darwin where ehframe
regnums were incorrect).
The old "gdb" register numbers, which I incorrectly thought were
stabs register numbers, are now referred to as "Process Plugin"
register numbers. This is the register numbering scheme that the
remote process controller stub (lldb-server, gdbserver, core file
support, kdp server, remote jtag devices, etc) uses to refer to the
registers. The process plugin register numbers may not be contiguous
- there are remote jtag devices that have gaps in their register
numbering schemes.
I removed all of the enums for "gdb" register numbers that we had
in lldb - these were meaningless - and I put LLDB_INVALID_REGNUM
in all of the register tables for the Process Plugin regnum slot.
This change is almost entirely mechnical; the one actual change in
here is to ProcessGDBRemote.cpp's ParseRegisters() which parses the
qXfer:features:read:target.xml response. As it parses register
definitions from the xml, it will assign sequential numbers as the
eRegisterKindLLDB numbers (the lldb register numberings must be
sequential, without any gaps) and if the xml file specifies register
numbers, those will be used as the eRegisterKindProcessPlugin
register numbers (and those may have gaps). A J-Link jtag device's
target.xml does contain a gap in register numbers, and it only
specifies the register numbers for the registers after that gap.
The device supports many different ARM boards and probably selects
different part of its register file as appropriate.
http://reviews.llvm.org/D12791
<rdar://problem/22623262>
llvm-svn: 247741
Summary:
CMICmdArgSet stores a vector of non-const pointers to the arguments
that it is validating. It owns them and is responsible for deleting
them.
We don't need to pass a const reference to the argument to
CMICmdArgSet::Add and then take the address and const_cast it
when we can just pass the argument pointer in directly.
This lets us remove some noise at every call site for CMICmdArgSet::Add
and then clean up a couple of bits inside CMICmdArgSet to remove
const_casts.
Reviewers: abidh, ki.stfu, domipheus
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12878
llvm-svn: 247677
Summary:
* SharedDataDestroy couldn't fail, so no need to return a status.
* No need for status, so can remove error message. The error message
wasn't displayed or used anywhere anyway.
Reviewers: abidh, ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12879
llvm-svn: 247673
Summary:
There's no need to call CMIUtilString::Format
with a string and no args.
Reviewers: abidh, ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12796
llvm-svn: 247403
Summary:
This platform-specific code wasn't fully implemented and wasn't
actually needed. There was one call for the log file path and
that has been addressed.
This lets us also remove an error message from MICmnLogMediumFile
as it is no longer used.
Reviewers: ki.stfu, domipheus, abidh
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12764
llvm-svn: 247388
Summary: Problem was caught on NetBSD.
Reviewers: joerg, sas
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12654
Change by Kamil Rytarowski <n54@gmx.com>
llvm-svn: 247034
Summary:
For an array declared like "blk[2][3]", this command was showing:
-data-evaluate-expression blk
^done,value="{[0] = [3], [1] = [3]}"
After this fix, it shows:
-data-evaluate-expression blk
^done,value="{[0] = {[0] = 1, [1] = 2, [2] = 3}, [1] = {[0] = 4, [1] = 5, [2] = 6}}"
The code to do the right thing was already available and used by other commands.
So I have just used that and removed the half-baked previous implementation.
Reviewers: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12634
llvm-svn: 246965
1. To handle the expression with spaces, this command uses 2 arguments. For a case
like -break-condition 1 i == 5, the first will pick the 'i' and second will
pick the '== 5'. But the second argument was made mandatory which failed in
cases when there was no space in the expression like i==5.
2. The function GetRestOfExpressionNotSurroundedInQuotes has 2 locals with the
same names. It resulted in one hiding the other and this function always
returned empty string.
No regression on Linux. Committed as obvious.
llvm-svn: 246847
Summary:
GetOptInc provides getopt(), getopt_long() and getopt_long_only().
Windows (for defined(_MSC_VER)) doesn't ship with all of the getopt(3) family members and needs all of them. NetBSD requires only getopt_long_only(3).
While there fix the code for clang diagnostics.
Author: Kamil Rytarowski
Reviewers: joerg
Subscribers: labath, zturner, lldb-commits
Differential Revision: http://reviews.llvm.org/D12582
llvm-svn: 246843
Summary:
This also moves the xcode support files to be near or the same
as the ones used for cmake.
The source/API/liblldb.xcodes.exports differs from the
source/API/liblldb.exports in that one contains the actual
symbol names (_ prefixed) while the other contains the symbol
names as they are in the code. The liblldb.exports file is
preprocessed by the cmake scripts into the correct per-platform
file needed (like a linker script on Linux).
This is not enabled on Windows as Windows doesn't use the same
name mangling and so it won't be valid there. Also, this is handled
already in a different way on Windows (via dll exports).
Reviewers: emaste, clayborg, labath, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12599
llvm-svn: 246822
Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
Summary:
When calling find_first_of and find_last_of on a single character,
we can instead just call find / rfind and make our intent more
clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12518
llvm-svn: 246609
Summary:
Comparing m_page_size against kInvalidPageSize was resulting in
a warning about comparing integers with different signs. Since
kInvalidPageSize isn't used anywhere outside of MachVMMemory.cpp,
we can readily transform it into a static const vm_size_t with
the correct value to avoid the sign comparison warnings.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12519
llvm-svn: 246606
Summary:
This was previously only established within debugserver, but
there is a use of the VLA extension in source/Host/macosx/Symbols.cpp,
so ignore this warning globally.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12515
llvm-svn: 246605
Summary:
find_first_of will look for any of the characters, not the full
string passed in. When looking for "--" then, we must use find
and not find_first_of.
Reviewers: ki.stfu, abidh
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12517
llvm-svn: 246529
Older OSX versions don't define NSOperatingSystemVersion, so building
lldb gets: error: unknown type name 'NSOperatingSystemVersion'
This patch fixes the build by having GetOSVersionNumbers return false if
__ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ < 101000, causing lldb to
behave the same as it did before the commit.
Reviewed by: jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12396
llvm-svn: 246138
Summary:
This was no longer needed and hasn't been needed since r143244
in 2011. This removes everything associated with generating
or using it.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11971
llvm-svn: 244850
major, minor, and patchlevel in the qHostInfo reply.
Document that qHostInfo may report major/minor/patch
separately / in addition to the version: combination.
<rdar://problem/22125465>
llvm-svn: 244716
Summary:
(This revision supersedes the abandon: http://reviews.llvm.org/D9716)
Size field is used to let the debugger attribute an address to a specific library when symbols are not available.
For example:
OpenGLESApp4.app!Cube_draw() Line 74 C
OpenGLESApp4.app!-[GameViewController glkView:drawInRect:](GameViewController * self, SEL _cmd, GLKView * view, CGRect rect) Line 89 C++
GLKit!<redacted>
QuartzCore!<redacted>
QuartzCore!<redacted>
QuartzCore!<redacted>
QuartzCore!<redacted>
QuartzCore!<redacted>
UIKit!<redacted>
UIKit!<redacted>
UIKit!<redacted>
UIKit!<redacted>
FrontBoardServices!<redacted>
CoreFoundation!<redacted>
Patch from paulmay@microsoft.com
Reviewers: ChuckR, abidh, ki.stfu
Subscribers: greggm, lldb-commits
Differential Revision: http://reviews.llvm.org/D11574
llvm-svn: 244573
Summary:
* Remove extraneous members that were just storing temporary
values.
* OutOfBand_e parameters don't need to be const as they are
scalars.
* Switch from a map with CMIUtilString values to using a mapping
function. This uses a switch statement which will generate
a warning if a new result class is added.
* Make BuildAsyncRecord a static function rather than a private
member function so that we can construct the result text
correctly and avoid having extra stuff in the header.
Reviewers: abidh, ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11751
llvm-svn: 243975
Summary: This brings the code more in line with the usual LLDB style. NFC.
Reviewers: abidh, ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11746
llvm-svn: 243967
Move code in CMICmdCmdVarListChildren::Execute() up so that the child
object will always be added when the MI command -var-list-children is
entered (instead of only when the print-value was all or simple). This
patch fixes evaluation of expressions like varobj.member for a created
varobj with children.
Reviewed by: abidh
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11659
llvm-svn: 243782
Expression evaluation error messages may have embedded new lines
and tabs. These should be escaped in the result string.
Patch by paulmaybee. Reviewed in http://reviews.llvm.org/D11570.
llvm-svn: 243741
This patch adds a test for ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED
around the code which requires 10.10 support to link. Without this, lldb
gets unresolved references to _csr_check and _rootless_allows_task_for_pid.
Reviewed by: jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11668
llvm-svn: 243715
Summary:
Currently if the "first child" of the pointer is a char type then the pointer is displayed as a string. This test succeeds incorrectly when the pointer is to a structured type with a char type as its first field. Fix this by switching the test to retrieve the pointee type and checking that it is a char type.
Reviewers: abidh, ChuckR, ki.stfu
Subscribers: greggm, lldb-commits
Differential Revision: http://reviews.llvm.org/D11488
llvm-svn: 243619
system, make a couple of additional checks to see if the
attach was denied via the System Integrity Protection that
is new in Mac OS X 10.11. If so, return a special E87
error code to indicate this to lldb.
Up in lldb, if we receive the E87 error code, be specific
about why the attach failed.
Also detect the more common case of general attach failure
and print a better error message than "lost connection".
I believe this code will all build on Mac OS X 10.10 systems.
It may not compile or run on earlier versions of the OS.
None of this should build on other non-darwin systems.
llvm-svn: 243511
The command "-break-insert ns::foo" for function 'foo' in namespace 'ns'
was being parsed as file:function. This patch fixes these cases by adding
checks for '::'. (Note: '::func' is not parsed correctly by lldb due to
llvm.org/pr24271).
Reviewed by: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11396
llvm-svn: 243281
Summary:
This replaces (void)x; usages where they x was subsequently
involved in an assertion with this macro to make the
intent more clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11451
llvm-svn: 243074
Summary:
No longer rely on cmake to set DEBUGSERVER_VERSION_STR,
but now generate the _vers.c file like xcode does
and include the generated file into the build on Mac OS X.
This fixes the cmake Mac OS X build after an earlier change
by Jason Molenda.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11450
llvm-svn: 243072
Summary:
This removes Authors:, Gotchas:, Changes: and Copyright:.
It leaves a couple of Gotcha: blocks that were not empty.
Reviewers: abidh, ki.stfu, domipheus
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11452
llvm-svn: 242996
Summary:
Many methods, in particular various 'Add' methods didn't have
any actual failure scenarios that were being emitted. This meant
that a lot of surrounding code could be simplified.
Reviewers: abidh, ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11412
llvm-svn: 242911
Summary:
* Remove extraneous members that were just storing temporary
values.
* ResultClass_e parameters don't need to be const as they are
scalars.
* Switch from a map with CMIUtilString values to using a mapping
function. This uses a switch statement which will generate
a warning if a new result class is added.
* Make BuildRecordResult a static function rather than a private
member function so that we can construct the result text
correctly and avoid having extra stuff in the header.
* Don't need (void) parameter lists in C++.
Reviewers: abidh, ki.stfu, domipheus
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11052
llvm-svn: 242769
Changed the "jthreads" key/value in the stop reply packets to be "jstopinfo". This JSON only contains threads with valid stop reasons and allows us not to have to ask about other threads via qThreadStopInfo when we are stepping. The "jstopinfo" only gets sent if there are more than one thread since the stop reply packet contains all the info needed for a single thread.
Added a Process::WillPublicStop() in case process subclasses want to do any extra gathering for public stops. For ProcessGDBRemote, we end up sending a jThreadsInfo packet to gather all expedited registers, expedited memory and MacOSX queue information. We only do this for public stops to minimize the packets we send when we have multiple private stops. Multiple private stops happen when a source level single step, step into or step out run the process multiple times while implementing the stepping, and none of these private stops make it out to the UI via notifications because they are private stops.
llvm-svn: 242593
frame, don't go any further, in RNBRemote::SendStopReplyPacketForThread.
These are the memory pre-fetches in the T05 packet and are
included in every private stop that lldb does. lldb needs, at most,
the caller stack frame so we're sending more data than needed by
including additional stack memory prefetches in this reply packet.
Once we've stopped for a public stop, we're going to do a jThreadsInfo
which will include the stack memory prefetches for all threads,
including the one which had the stop reason.
llvm-svn: 242380
This allows stepping operations that don't ever do a public stop to get all the info they need without having to send a jThreadsInfo packet since those tend to be large.
This patch will be followed by a patch that will detect when we do a public stop, and when that happens we will send a jThreadsInfo packet at that time to get all expedited registers and memory.
llvm-svn: 242352
This fixes an off-by-one bug in CMICmdCmdDataInfoLine::Acknowledge. Given:
LineEntry: \[0x0000000100000f37-0x0000000100000f45\): /path/to/file:123:1
-data-info-line would report the line as 12, omitting the last digit.
Reviewed by: ki.stfu, abidh
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11209
llvm-svn: 242306
vm_kernel_page_size appears to not be defined on OSX Mavericks, so the
build fails. This patch fixes the build by calculating the pagesize if
_VM_PAGE_SIZE_H_ is not defined.
llvm-svn: 242114
Summary:
This is the first part of our effort to make llgs single threaded. Currently, llgs consists of
about three threads and the synchronisation between them is a major source of latency when
debugging linux and android applications.
In order to be able to go single threaded, we must have the ability to listen for events from
multiple sources (primarily, client commands coming over the network and debug events from the
inferior) and perform necessary actions. For this reason I introduce the concept of a MainLoop.
A main loop has the ability to register callback's which will be invoked upon receipt of certain
events. MainLoopPosix has the ability to listen for file descriptors and signals.
For the moment, I have merely made the GDBRemoteCommunicationServerLLGS class use MainLoop
instead of waiting on the network socket directly, but the other threads still remain. In the
followup patches I indend to migrate NativeProcessLinux to this class and remove the remaining
threads.
Reviewers: ovyalov, clayborg, amccarth, zturner, emaste
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11066
llvm-svn: 242018
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
results if the -Q option is not provided. Also took out the quietly
option from AddInitialCommand, we don't use that to set this option,
we use the override set by the -Q option.
<rdar://problem/21232087>
llvm-svn: 241652
proc_set_wakemon_params() to raise the limit on the # of wakeups
per second that are acceptable before the system may send an
EXC_RESOURCE signal to debugserver.
<rdar://problem/19631512>
llvm-svn: 241553
Summary: Use string::find(char) for single character strings.
Reviewers: abidh, ki.stfu, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10943
llvm-svn: 241390
Summary:
Many places should have been using size_t rather than MIuint or
MIint. This is particularly true for code that uses std::string::find(),
std::string::rfind(), std::string::size(), and related methods.
Reviewers: abidh, ki.stfu, domipheus
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10931
llvm-svn: 241360
Summary:
Remove unnecessary members from MICmdArgContext.
We don't need constants for these value stored in every instance
of the class.
Reviewers: ki.stfu, abidh
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10926
llvm-svn: 241357
Summary:
This is a start on bringing lldb-mi more in line with the typical
LLDB coding style. This just removes the usage of the typedefs and
doesn't yet clean up any logic or other issues. (This is to keep
the review simple.)
Reviewers: abidh, ki.stfu, domipheus
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10917
llvm-svn: 241349
This should take a "const char*" not a "char &".
Summary:
Fix type signature for CMIUtilString::IsAllValidAlphaAndNumeric.
This passes the MI tests on Mac OS X.
Reviewers: ki.stfu, abidh, domipheus
Subscribers: lldb-commits-list
Differential Revision: http://reviews.llvm.org/D10906
llvm-svn: 241322
Usually -lpthread is included due to LLVM link options,
but when LLVM threading is disabled, this does not happen.
pthread is still needed however because LLDB uses threading
regardless of whether LLVM is built with threading support or not.
Differential Revision: http://reviews.llvm.org/D5431
llvm-svn: 241006
- Avoid sending the qfThreadInfo, qsThreadInfo packets if we have a stop reply packet with the threads already (save 2 round trip packets)
- Include the qname, qserial and qkind in the JSON info
- Report the qname, qserial and qkind to the thread so it can cache it to avoid many packets on MacOSX and iOS
- Don't clear all discoverable settings when we exec, just the ones we need to saves 1-5 packets for each exec.
llvm-svn: 240988
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
A "qSymbol::" is sent when shared libraries have been loaded by hooking into the Process::ModulesDidLoad() function from within ProcessGDBRemote. This function was made virtual so that the ProcessGDBRemote version is called, which then first calls the Process::ModulesDidLoad(), and then it queries for any symbol lookups that the remote GDB server might want to do.
This allows debugserver to request the "dispatch_queue_offsets" symbol so that it can read the queue name, queue kind and queue serial number and include this data as part of the stop reply packet. Previously each thread would have to do 3 memory reads in order to read the queue name.
This is part of reducing the number of packets that are sent between LLDB and the remote GDB server.
<rdar://problem/21494354>
llvm-svn: 240466
We have been working on reducing the packet count that is sent between LLDB and the debugserver on MacOSX and iOS. Our approach to this was to reduce the packets required when debugging multiple threads. We currently make one qThreadStopInfoXXXX call (where XXXX is the thread ID in hex) per thread except the thread that stopped with a stop reply packet. In order to implement multiple thread infos in a single reply, we need to use structured data, which means JSON. The new jThreadsInfo packet will attempt to retrieve all thread infos in a single packet. The data is very similar to the stop reply packets, but packaged in JSON and uses JSON arrays where applicable. The JSON output looks like:
[
{ "tid":1580681,
"metype":6,
"medata":[2,0],
"reason":"exception",
"qaddr":140735118423168,
"registers": {
"0":"8000000000000000",
"1":"0000000000000000",
"2":"20fabf5fff7f0000",
"3":"e8f8bf5fff7f0000",
"4":"0100000000000000",
"5":"d8f8bf5fff7f0000",
"6":"b0f8bf5fff7f0000",
"7":"20f4bf5fff7f0000",
"8":"8000000000000000",
"9":"61a8db78a61500db",
"10":"3200000000000000",
"11":"4602000000000000",
"12":"0000000000000000",
"13":"0000000000000000",
"14":"0000000000000000",
"15":"0000000000000000",
"16":"960b000001000000",
"17":"0202000000000000",
"18":"2b00000000000000",
"19":"0000000000000000",
"20":"0000000000000000"},
"memory":[
{"address":140734799804592,"bytes":"c8f8bf5fff7f0000c9a59e8cff7f0000"},
{"address":140734799804616,"bytes":"00000000000000000100000000000000"}
]
}
]
It contains an array of dicitionaries with all of the key value pairs that are normally in the stop reply packet. Including the expedited registers. Notice that is also contains expedited memory in the "memory" key. Any values in this memory will get included in a new L1 cache in lldb_private::Process where if a memory read request is made and that memory request fits into one of the L1 memory cache blocks, it will use that memory data. If a memory request fails in the L1 cache, it will fall back to the L2 cache which is the same block sized caching we were using before these changes. This allows a process to expedite memory that you are likely to use and it reduces packet count. On MacOSX with debugserver, we expedite the frame pointer backchain for a thread (up to 256 entries) by reading 2 pointers worth of bytes at the frame pointer (for the previous FP and PC), and follow the backchain. Most backtraces on MacOSX and iOS now don't require us to read any memory!
We will try these packets out and if successful, we should port these to lldb-server in the near future.
<rdar://problem/21494354>
llvm-svn: 240354
ObjCARCOpts is already included by ClangCodeGen. Linking it again causes the error in PR22543.
Differential Revision: http://reviews.llvm.org/D10399
llvm-svn: 240104
For some communication channels, sending large packets can be very
slow. In those cases, it may be faster to compress the contents of
the packet on the target device and decompress it on the debug host
system. For instance, communicating with a device using something
like Bluetooth may be an environment where this tradeoff is a good one.
This patch adds a new field to the response to the "qSupported" packet
(which returns a "qXfer:features:" response) -- SupportedCompressions
and DefaultCompressionMinSize. These tell you what the remote
stub can support.
lldb, if it wants to enable compression and can handle one of those
algorithms, it can send a QEnableCompression packet specifying the
algorithm and optionally the minimum packet size to use compression
on. lldb may have better knowledge about the best tradeoff for
a given communication channel.
I added support to debugserver an lldb to use the zlib APIs
(if -DHAVE_LIBZ=1 is in CFLAGS and -lz is in LDFLAGS) and the
libcompression APIs on Mac OS X 10.11 and later
(if -DHAVE_LIBCOMPRESSION=1). libz "zlib-deflate" compression.
libcompression can support deflate, lz4, lzma, and a proprietary
lzfse algorithm. libcompression has been hand-tuned for Apple
hardware so it should be preferred if available.
debugserver currently only adds the SupportedCompressions when
it is being run on an Apple watch (TARGET_OS_WATCH). Comment
that #if out from RNBRemote.cpp if you want to enable it to
see how it works. I haven't tested this on a native system
configuration but surely it will be slower to compress & decompress
the packets in a same-system debug session.
I haven't had a chance to add support for this to
GDBRemoteCommunciationServer.cpp yet.
<rdar://problem/21090180>
llvm-svn: 240066
Summary:
Previously if an MI command had **X** mandatory and **Y** optional arguments you could provide **X** or more optional arguments without providing any of the mandatory arguments, and the argument validation code wouldn't complain.
For example this would pass argument validation even though the mandatory **address** and **count** arguments are missing:
-data-read-memory-bytes --thread 1 --frame 0
Part of the problem was that an empty string was considered a valid value for a mandatory argument, which didn't make much sense.
Patch by Vadim Macagon. Thanks!
Test Plan:
./dotest.py -A x86_64 -C clang --executable $BUILDDIR/bin/lldb tools/lldb-mi/
No unexpected failures on my Ubuntu 14.10 64bit Virtualbox VM.
Reviewers: domipheus, ki.stfu, abidh
Reviewed By: ki.stfu, abidh
Subscribers: brucem, lldb-commits
Differential Revision: http://reviews.llvm.org/D10299
llvm-svn: 239297
LLDB included editline in a couple of places, not respecting LLDB_DISABLE_LIBEDIT. As far as I can tell, these includes are not used, so I am removing them.
llvm-svn: 239199
a little more resilient to freely formatted json. Greg's change
in r238279 made the json output from StructuredData unconditionally
pretty-printed and the spaces were confusing debugserver.
llvm-svn: 239013
Summary:
Several changes to fix CMake builds of LLDB with the
BUILD_SHARED_LIBS setting on.
- Force all internal libraries to be built STATIC.
- Add additional library dependencies (pthread, dl,
runtimedyld).
- modify finalisation of SWIG wrapper to symlink the
"lib" dir into python/site-packages, so _lldb.so's
RPATH resolves.
Test Plan: Verified one test case with "dotest.py".
Reviewers: sylvestre.ledru, zturner
Reviewed By: zturner
Subscribers: zturner, ted, tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D10157
llvm-svn: 239007
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
qEcho:%s
where '%s' is any valid string. The response to this packet is the exact packet itself with no changes, just reply with what you received!
This will help us to recover from packets timing out much more gracefully. Currently if a packet times out, LLDB quickly will hose up the debug session. For example, if we send a "abc" packet and we expect "ABC" back in response, but the "abc" command takes longer than the current timeout value this will happen:
--> "abc"
<-- <<<error: timeout>>>
Now we want to send "def" and get "DEF" back:
--> "def"
<-- "ABC"
We got the wrong response for the "def" packet because we didn't sync up with the server to clear any current responses from previously issues commands.
The fix is to modify GDBRemoteCommunication::WaitForPacketWithTimeoutMicroSecondsNoLock() so that when it gets a timeout, it syncs itself up with the client by sending a "qEcho:%u" where %u is an increasing integer, one for each time we timeout. We then wait for 3 timeout periods to sync back up. So the above "abc" session would look like:
--> "abc"
<-- <<<error: timeout>>> 1 second
--> "qEcho:1"
<-- <<<error: timeout>>> 1 second
<-- <<<error: timeout>>> 1 second
<-- "abc"
<-- "qEcho:1"
The first timeout is from trying to get the response, then we know we timed out and we send the "qEcho:1" packet and wait for 3 timeout periods to get back in sync knowing that we might actually get the response for the "abc" packet in the mean time...
In this case we would actually succeed in getting the response for "abc". But lets say the remote GDB server is deadlocked and will never response, it would look like:
--> "abc"
<-- <<<error: timeout>>> 1 second
--> "qEcho:1"
<-- <<<error: timeout>>> 1 second
<-- <<<error: timeout>>> 1 second
<-- <<<error: timeout>>> 1 second
We then disconnect and say we lost connection.
We might also have a bad GDB server that just dropped the "abc" packet on the floor. We can still recover in this case and it would look like:
--> "abc"
<-- <<<error: timeout>>> 1 second
--> "qEcho:1"
<-- "qEcho:1"
Then we know our remote GDB server is still alive and well, and it just dropped the "abc" response on the floor and we can continue to debug.
<rdar://problem/21082939>
llvm-svn: 238530
This change also get rid of an unused Debugger instance in
GDBRemoteCommunicationServerLLGS and the command interpreter from
lldb-platform what was used only for enabling logging.
Differential revision: http://reviews.llvm.org/D9876
llvm-svn: 238319
We know have on API we should use for all XML within LLDB in XML.h. This API will be easy back the XML parsing by different libraries in case libxml2 doesn't work on all platforms. It also allows the only place for #ifdef ...XML... to be in XML.h and XML.cpp. The API is designed so it will still compile with or without XML support and there is a static function "bool XMLDocument::XMLEnabled()" that can be called to see if XML is currently supported. All APIs will return errors, false, or nothing when XML isn't enabled.
Converted all locations that used XML over to using the host XML implementation.
Added target.xml support to debugserver. Extended the XML register format to work for LLDB by including extra attributes and elements where needed. This allows the target.xml to replace the qRegisterInfo packets and allows us to fetch all register info in a single packet.
<rdar://problem/21090173>
llvm-svn: 238224
If binding to port 0 is selected, the actual port is printed.
This improves the reliability of platform startup by ensuring that
a free port can be found.
TEST PLAN
./lldb-server platform --listen *:0
Listening for a connection from <port-number>...
Will appear on stdout (with other stuff potentially)
llvm-svn: 238173
# Add CMICmdArgValPrintValues argument
# Rework -stack-list-arguments/-stack-list-locals/-stack-list-variables/-var-update/-var-list-children
commands to use the CMICmdArgValPrintValues argument instead of usage of pair of non-mandatory
arguments like: CMICmdArgValNumber(0) || CMICmdArgValLongOptions("no-values")
llvm-svn: 237429
Summary:
This patch fixes/cleans code around of (gdb) prompt:
# Add CMICmnStreamStdout::WritePrompt
# Clean up CMICmnStreamStdout::TextToStdout (don't lock
the m_mutex twice because it will be locked in CMICmnStreamStdout::WritePriv)
# Remove unused CMICmnStreamStdin::m_bShowPrompt field
# Refactor CMICmnLLDBDebuggerHandleEvents to use CMICmnStreamStdout::WritePrompt
instead of TextToStdout("(gdb)")
# Refactor CMIDriver to use CMICmnStreamStdout::WritePrompt instead of
```
if (bOk && m_rStdin.GetEnablePrompt())
bOk = m_rStdOut.WriteMIResponse(m_rStdin.GetPrompt());
```
Test Plan: ./dotest.py -v --executable $BUILDDIR/bin/lldb tools/lldb-mi/
Reviewers: abidh
Reviewed By: abidh
Subscribers: lldb-commits, abidh
Differential Revision: http://reviews.llvm.org/D9737
llvm-svn: 237248
Removed some unused variables, added some consts, changed some casts
to const_cast. I don't think any of these changes are very
controversial.
Differential Revision: http://reviews.llvm.org/D9674
llvm-svn: 237218
Summary:
When -var-create fails, we will now show the error message from the failed evaluation if it is available.
Patch from chuckr@microsoft.com
Test Plan: I fixed the MiVarTestCase.test_lldbmi_eval test to expect the new error string. All MI tests passing on OS X.
Reviewers: abidh, ChuckR
Subscribers: greggm, lldb-commits, paulmaybee
Differential Revision: http://reviews.llvm.org/D9691
llvm-svn: 237094
Summary:
New dotest options that allow arbitrary log channels and
categories to be enabled. Also enables logging for locally run
debug servers.
Log messages are separated into separate files per test case.
(this makes it possible to log in dosep runs)
These new log files are stored side-by-side with trace files in the
session directory.
These files are deleted by default if the test run is successful.
If --log-success is specified, even successful logs are retained.
--log-success is useful for creating reference log files.
Test Plan:
add '--channel "lldb all" --channel "gdb-remote packets" --log-success'
to your dotest options
Tested on OSX and Linux
Differential Revision: http://reviews.llvm.org/D9594
llvm-svn: 236956
This patch includes the following changes:
# Add CMIUtilString::ConvertToASCII to convert unicode to ASCII (MI)
# Rework CMICmnLLDBUtilSBValue::GetSimpleValue to print wide/unicode char (MI)
## Add CMICmnLLDBUtilSBValue::GetSimpleValueChar
## Extend CMICmnLLDBUtilSBValue::IsCharType to accept char16_t/char32_t
## Don't ignore the fail_value in SBValue::GetValueAsUnsigned
# Rework CMIUtilString::ConvertToASCII (MI)
## Don't use templates
## Change the function signature to convert signle characters (was std::basic_string)
## Rename CMIUtilString::ConvertToASCII to CMIUtilString::ConvertToPrintableASCII
# Add CMIUtilString::ConvertToPrintableASCII for char (MI)
## Refactor CMIUtilString::Escape
## Simplify CMICmnLLDBUtilSBValue::GetSimpleValueChar for char
# Add char16_t* and char32_t* support in CMICmnLLDBUtilSBValue::GetSimpleValue (MI)
## Add CMICmnLLDBUtilSBValue::GetSimpleValueCStringPointer
## Add CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2
(it's extended version of CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory)
# Improve error checking in CMICmnLLDBUtilSBValue::GetSimpleValueChar (MI)
# Refactor CMICmnLLDBUtilSBValue (MI)
## Remove CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory
(use CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2 instead)
## Rename CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory2 to
CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory
## Move CMICmnLLDBUtilSBValue::GetValueCString to private methods
## Rename CMICmnLLDBUtilSBValue::GetValueCString to
CMICmnLLDBUtilSBValue::GetSimpleValueCStringArray
## Remove CMICmnLLDBUtilSBValue::GetChildValueCString
# Improve MiGdbSetShowTestCase.test_lldbmi_gdb_set_show_print_char_array_as_string test to check char16_t/char32_t (MI)
# Fix CMICmnLLDBUtilSBValue::GetSimpleValueCStringArray for Unicode (MI)
## Fix handling of char16_t and char32_t
## Improve CMICmnLLDBUtilSBValue::ReadCStringFromHostMemory to read
variables of type char[]: add vnMaxLen argument
## Turn on few cases to check char16_t[] and char32_t[] output in
MiGdbSetShowTestCase.test_lldbmi_gdb_set_show_print_char_array_as_string
# Remove unnecessary checks in CMICmnLLDBUtilSBValue (MI)
llvm-svn: 236827
This patch incldues the following:
# Add from/to arguments in -var-list-children command (MI)
## Handle from and to args
## Don't print children=[] if numchild is 0
## A bit refactoring
## Add MiVarTestCase.test_lldbmi_var_list_children test
# Refactor -var-list-children (MI)
## Remove CMICmdCmdVarListChildren::VecMIValueResult_t
## Add CMICmdCmdVarListChildren::m_miValueList
## Remove CMICmdCmdVarListChildren::m_vecMiValueResult
(use CMICmdCmdVarListChildren::m_miValueList instead)
## Print error message if value is invalid:
```
^error,msg="variable invalid"
```
## Refactor CMICmdCmdVarListChildren::Acknowledge and remove duplicated code
## Don't print children=[] if numchild is 0
## Add error checking
## Use CMICmnLLDBDebugSessionInfo::VariableInfoFormat_e for print-values
## Add few more empty-range test cases in MiVarTestCase.test_lldbmi_var_list_children
#Improve MiVarTestCase.test_lldbmi_var_list_children test (MI)
llvm-svn: 236820
It was just detecting the existance of the value. If it gets the value correctly, we need to check that it is non-zero to see if cpu64bit_capable should be true.
<rdar://problem/20857426>
llvm-svn: 236759
Summary:
This changes add -target-attach and -target-detach.
-target-attach allows lldb-mi to attach to an existing process by it's process id, matching gdb mi's syntax of '-target-attach <pid'. Additionally, support has been added for attaching to a process by name using '-target-attach -n <name>'. Combining this with --waitfor will allow lldb mi to attach to a process by name when the process starts.
-target-detach simply detaches from the current process
Patch from chuckr@microsoft.com
Test Plan: I have added three tests, one each for -target-attach <pid>, -target-attach -n <name>, and -target-attach -n <name> --waitfor
Reviewers: paulmaybee, abidh, ChuckR
Subscribers: greggm, lldb-commits
Differential Revision: http://reviews.llvm.org/D9484
llvm-svn: 236705
Summary:
- The address argument can now be an expression (e.g. &array), it's no longer restricted to being just a number literal.
- The -o (offset) option is now properly handled, not just silently ignored.
- The --thread option is now properly handled.
- A new --frame option has been added for consistency with GDB.
- Added a new test to verify old and new functionality.
Patch by Vadim Macagon. Thanks!
Test Plan: ./dotest.py -A x86_64 -C clang --executable $BUILDDIR/bin/lldb tools/lldb-mi/data
Reviewers: domipheus, abidh, ki.stfu
Reviewed By: abidh, ki.stfu
Subscribers: brucem, lldb-commits
Differential Revision: http://reviews.llvm.org/D9470
llvm-svn: 236694
This command is able to list both local variables and stack arguments for a specific thread/frame.
Args are denoted with 'arg="1"'.
Patch from Chuck Ries.
llvm-svn: 236090
During testing -data-list-register-values, I saw a crash here due to buffer overflow.
This commit should fix the crash. There is still problem with printing 1-byte register
in some cases that I will fix separately.
No regression on MI test cases.
llvm-svn: 235991
Greg Clayton