This instruction can be thought of as reading either the even elements of a vXi32 input or the lower half of each element of a vXi64 input. We currently use the vXi32 interpretation, but vXi64 matches better with its broadcast behavior in EVEX.
I'm looking at moving MULDQ/MULUDQ creation to a DAG combine so we can do it when AVX512DQ is enabled without having to go through Custom lowering. But in some of the test cases we failed to use a broadcast load due to the size difference. This should help with that.
I'm also wondering if we can model these instructions in native IR and remove the intrinsics and I think using a vXi64 type will work better with that.
llvm-svn: 326991
Previously we used the immediate encoding if the load was in operand 0 and the short encoding if the load was in operand 1.
This added an insane number of bytes to the size of the isel table. I'm wondering if we should always use the immediate form during isel and change to the short form during emission. This would remove the need to pattern match every combination for both the immediate form and the short form during isel. We could do the same with vpcmpgt
llvm-svn: 325456
ISD::ADD implies individual vector element addition with no carries between elements. But for a vXi1 type that would be the same as XOR. And we already turn ISD::ADD into ISD::XOR for all vXi1 types during lowering. So the ISD::ADD pattern would never be able to match anyway.
KADD is different, it adds the elements but also propagates a carry between them. This just a way of doing an add in k-register without bitcasting to the scalar domain. There's still no way to match the pattern, but at least its not obviously wrong.
llvm-svn: 324861
Legalization is still biased to turn LT compares in to GT by swapping operands to avoid needing extra isel patterns to commute.
I'm hoping to remove TESTM/TESTNM next and this should simplify that by making EQ/NE more similar.
llvm-svn: 323604
Summary:
These instructions zero the non-scalar part of the lower 128-bits which makes them different than the FMA3 instructions which pass through the non-scalar part of the lower 128-bits.
I've only added fmadd because we should be able to derive all other variants using operand negation in the intrinsic header like we do for AVX512.
I think there are still some missed negate folding opportunities with the FMA4 instructions in light of this behavior difference that I hadn't noticed before.
I've split the tests so that we can use different intrinsics for scalar testing between the two. I just copied the tests split the RUN lines and changed out the scalar intrinsics.
fma4-fneg-combine.ll is a new test to make sure we negate the fma4 intrinsics correctly though there are a couple TODOs in it.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39851
llvm-svn: 318984
(V)PHMINPOSUW determines the UMIN element in an v8i16 input, with suitable bit flipping it can also be used for SMAX/SMIN/UMAX cases as well.
This patch matches vXi16 SMAX/SMIN/UMAX/UMIN horizontal reductions and reduces the input down to a v8i16 vector before calling (V)PHMINPOSUW.
A later patch will use this for v16i8 reductions as well (PR32841).
Differential Revision: https://reviews.llvm.org/D39729
llvm-svn: 318917
This makes the fact that X86 needs an explicit mask output not part of the type constraint for the ISD::MSCATTER.
This also gives the X86ISD::MGATHER/MSCATTER nodes a common base class simplifying the address selection code in X86ISelDAGToDAG.cpp
llvm-svn: 318823
Now we consistently represent the mask result without relying on isel ignoring it.
We now have a more general SDNode and type constraints to represent these nodes in isel patterns. This allows us to present both both vXi1 and XMM/YMM mask types with a single set of constraints.
llvm-svn: 318821
We don't need separate 32 and 64 node types. We can use SDTCisInt and SDTCisSameSizeAs to ensure the mask size the result type and is integer.
llvm-svn: 318732
We don't need a dyn_cast, the predicate already specified the base node. We only need to check the type of the index, the base ptr is guaranteed to be scalar.
llvm-svn: 318596
This allows us to remove extra extend creation during lowering and more accurately reflects the semantics of the instruction.
While there add an extra output VT to X86 masked gather node to better match the isel pattern predicate. Currently we're exploiting the fact that the isel table doesn't count how many output results a node actually has if the result type of any can be inferred from the first result and the type constraints defined in tablegen. I think we might ultimately want to lower all MGATHER/MSCATTER to an X86ISD node with the extra mask result and stop relying on this hole in the isel checking.
llvm-svn: 318278
I want to reuse the VRNDSCALE node for the legacy SSE rounding intrinsics so that those intrinsics can use EVEX instructions. All of these nodes share tablegen multiclasses so I split them all so that they all remain similar in their implementations.
llvm-svn: 318007
Next step is to use them for the legacy FMA scalar intrinsics as well. This will enable the legacy intrinsics to use EVEX encoded opcodes and the extended registers.
llvm-svn: 317453
Summary:
AVX512 added RCP14 and RSQRT instructions which improve accuracy over the legacy RCP and RSQRT instruction, but not enough accuracy to remove the need for a Newton Raphson refinement.
Currently we use these new instructions for the legacy packed SSE instrinics, but not the scalar instrinsics. And we use it for fast math optimization of division and reciprocal sqrt.
I think switching the legacy instrinsics maybe surprising to the user since it changes the answer based on which processor you're using regardless of any fastmath settings. It's also weird that we did something different between scalar and packed.
As far at the reciprocal estimation, I think it creates unnecessary deltas in our output behavior (and prevents EVEX->VEX). A little playing around with gcc and icc and godbolt suggest they don't change which instructions they use here.
This patch adds new X86ISD nodes for the RCP14/RSQRT14 and uses those for the new intrinsics. Leaving the old intrinsics to use the old instructions.
Going forward I think our focus should be on
-Supporting 512-bit vectors, which will have to use the RCP14/RSQRT14.
-Using RSQRT28/RCP28 to remove the Newton Raphson step on processors with AVX512ER
-Supporting double precision.
Reviewers: zvi, DavidKreitzer, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39583
llvm-svn: 317413
The XOP rotations act as ROTL with +ve values and ROTR with -ve values, which means that we can treat them all as ROTL with unsigned modulo. We already check that we're only trying to lower as ROTL for XOP rotations.
Differential Revision: https://reviews.llvm.org/D37949
llvm-svn: 314207
This required changing the ISD opcode for these instructions to have the commutable operands first and the addend last. This way tablegen can autogenerate the additional patterns for us.
llvm-svn: 314083
Similar to what we do for X86ISD::SHRUNKBLEND just turn X86ISD::SELECT into ISD::VSELECT. This allows us to remove the duplicated TRUNC patterns.
Differential Revision: https://reviews.llvm.org/D38022
llvm-svn: 313644
This effects the vector shift and rotates as well as some of the vector compares.
The changes to the shifts by immediates allows a few hundred bytes to be removed by removing type checks for the size of the immediate containing the shift/rotate amount.
llvm-svn: 313512
This uses the capability introduced in r312464 to make SDNode patterns commutable on the first two operands.
This allows us to remove some of the extra FMA patterns that have to put loads and mask operands in different places to cover all cases. This even includes patterns that were missing to support match a load in the first operand with FMA4. Non-broadcast loads with masking for AVX512.
I believe this is causing us to generate some duplicate patterns because tablegen's isomorphism checks don't catch isomorphism between the patterns as written in the td. It only detects isomorphism in the commuted variants it tries to create. The the unmasked 231 and 132 memory forms are isomorphic as written in the td file so we end up keeping both. I think we precommute the 132 pattern to fix this.
We also need a follow up patch to go back to the legacy FMA3 instructions and add patterns to the 231 and 132 forms which we currently don't have.
llvm-svn: 312469
There's no reason to have a target specific node with the same semantics as a target independent opcode.
This should simplify D36335 so that it doesn't need to touch X86ISelDAGToDAG.cpp
Differential Revision: https://reviews.llvm.org/D36983
llvm-svn: 311568
We can load the memory VT and check for natural alignment. This also adds a new preferNonTemporalLoad helper that checks the correct subtarget feature based on the load size.
This shrinks the isel table by at least 5000 bytes by allowing more reordering and combining to occur.
llvm-svn: 311266
Summary: Just like the FIXME says, there is no alignment requirement for MMX.
Reviewers: RKSimon, zvi, igorb
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36815
llvm-svn: 311090
Summary: The aligned load predicates don't suppress themselves if the load is non-temporal the way the unaligned predicates do. For the most part this isn't a problem because the aligned predicates are mostly used for instructions that only load the the non-temporal loads have priority over those. The exception are masked loads.
Reviewers: RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35712
llvm-svn: 309079
Masked gather for vector length 2 is lowered incorrectly for element type i32.
The type <2 x i32> was automatically extended to <2 x i64> and we generated VPGATHERQQ instead of VPGATHERQD.
The type <2 x float> is extended to <4 x float>, so there is no bug for this type, but the sequence may be more optimal.
In this patch I'm fixing <2 x i32>bug and optimizing <2 x float> sequence for GATHERs only. The same fix should be done for Scatters as well.
Differential revision: https://reviews.llvm.org/D34343
llvm-svn: 305987
First possible step towards merging SSE/AVX memory folding pattern fragments.
Also allows us to remove the duplicate non-temporal load logic.
Differential Revision: https://reviews.llvm.org/D33902
llvm-svn: 305184
This patch defines the i1 type as illegal in the X86 backend for AVX512.
For DAG operations on <N x i1> types (build vector, extract vector element, ...) i8 is used, and should be truncated/extended.
This should produce better scalar code for i1 types since GPRs will be used instead of mask registers.
Differential Revision: https://reviews.llvm.org/D32273
llvm-svn: 303421
Reduced version of D26357 - based on the discussion on llvm-dev about canonicalization of UMIN/UMAX/SMIN/SMAX as well as ABS I've reduced that patch to just the ABS ISD node (with x86/sse support) to improve basic combines and lowering.
ARM/AArch64, Hexagon, PowerPC and NVPTX all have similar instructions allowing us to make this a generic opcode and move away from the hard coded tablegen patterns which makes it tricky to match more complex patterns.
At the moment this patch doesn't attempt legalization as we only create an ABS node if its legal/custom.
Differential Revision: https://reviews.llvm.org/D29639
llvm-svn: 297780
Craig Topper