the register state when debugging AArch32 programs (armv7
programs running on an armv8 processor). Most notably,
there is no "fpscr" register in the register context -
there is an fpsr and an fpcr.
Also fix a bug where the floating point values could not
be written in armv7 processes.
<rdar://problem/18977767>
llvm-svn: 226244
The issue with Thumb IT (if/then) instructions is the IT instruction preceeds up to four instructions that are made conditional. If a breakpoint is placed on one of the conditional instructions, the instruction either needs to match the thumb opcode size (2 or 4 bytes) or a BKPT instruction needs to be used as these are always unconditional (even in a IT instruction). If BKPT instructions are used, then we might end up stopping on an instruction that won't get executed. So if we do stop at a BKPT instruction, we need to continue if the condition is not true.
When using the BKPT isntructions are easy in that you don't need to detect the size of the breakpoint that needs to be used when setting a breakpoint even in a thumb IT instruction. The bad part is you will now always stop at the opcode location and let LLDB determine if it should auto-continue. If the BKPT instruction is used, the BKPT that is used for ARM code should be something that also triggers the BKPT instruction in Thumb in case you set a breakpoint in the middle of code and the code is actually Thumb code. A value of 0xE120BE70 will work since the lower 16 bits being 0xBE70 happens to be a Thumb BKPT instruction.
The alternative is to use trap or illegal instructions that the kernel will translate into breakpoint hits. On Mac this was 0xE7FFDEFE for ARM and 0xDEFE for Thumb. The darwin kernel currently doesn't recognize any 32 bit Thumb instruction as a instruction that will get turned into a breakpoint exception (EXC_BREAKPOINT), so we had to use the BKPT instruction on Mac. The linux kernel recognizes a 16 and a 32 bit instruction as valid thumb breakpoint opcodes. The benefit of using 16 or 32 bit instructions is you don't stop on opcodes in a IT block when the condition doesn't match.
To further complicate things, single stepping on ARM is often implemented by modifying the BCR/BVR registers and setting the processor to stop when the PC is not equal to the current value. This means single stepping is another way the ARM target can stop on instructions that won't get executed.
This patch does the following:
1 - Fix the internal debugserver for Apple to use the BKPT instruction for ARM and Thumb
2 - Fix LLDB to catch when we stop in the middle of a Thumb IT instruction and continue if we stop at an instruction that won't execute
3 - Fixes this in a way that will work for any target on any platform as long as it is ARM/Thumb
4 - Adds a patch for ignoring conditions that don't match when in ARM mode (see below)
This patch also provides the code that implements the same thing for ARM instructions, though it is disabled for now. The ARM patch will check the condition of the instruction in ARM mode and continue if the condition isn't true (and therefore the instruction would not be executed). Again, this is not enable, but the code for it has been added.
<rdar://problem/19145455>
llvm-svn: 223851
a number of warnings to be enabled. The one making the most noise
across the code base right now is CLANG_WARN_UNREACHABLE_CODE = YES.
llvm-svn: 219910
do that (RunCommandInterpreter, HandleCommands, HandleCommandsFromFile) to gather
the options into an options class. Also expose that to the SB API's.
Change the way the "-o" options to the lldb driver are processed so:
1) They are run synchronously - didn't really make any sense to run the asynchronously.
2) The stop on error
3) "quit" in one of the -o commands will not quit lldb - not the command interpreter
that was running the -o commands.
I added an entry to the run options to stop-on-crash, but I haven't implemented that yet.
llvm-svn: 219553
This patch fixes the codesigning of debugserver on OSX when built with
cmake. Without this you get this error when debugging:
error: process launch failed: unable to locate debugserver
Note: you also need to set LLDB_DEBUGSERVER_PATH to point to your built debugserver.
e.g. export LLDB_DEBUGSERVER_PATH=`pwd`/bin/debugserver
Change by dawn@burble.org.
Tested on MacOSX 10.9.5 and Xcode 6.1 Beta using cmake/ninja.
Verified no build break on Linux Ubuntu cmake/ninja and Xcode 6.1 canonical build.
llvm-svn: 218890
to the remote side (QStartNoAckMode) - it may take a little longer
than normal to get a reply.
In debugserver, hardcode the priority for several threads so they
aren't de-prioritized when a user app is using system resources.
Also, set the names of the threads.
<rdar://problem/17509866>
llvm-svn: 213828
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Elevate ProcessInfo and ProcessLaunchInfo into their own headers.
llgs will be using ProcessLaunchInfo but doesn't need to pull in
the rest of Process.h.
This also moves a bunch of implementation details from the header
declarations into ProcessInfo.cpp and ProcessLaunchInfo.cpp.
Tested on Ubuntu 14.04 Cmake and MacOSX Xcode.
Related to https://github.com/tfiala/lldb/issues/26.
llvm-svn: 212005
Replace adhoc inline implementation of llvm::array_lengthof in favour of the
implementation in LLVM. This is simply a cleanup change, no functional change
intended.
llvm-svn: 211868
process fully reaped. The race & bad behavior was because we were letting
the reaping thread in LLDB to also set the Process exit status, so debugserver
would sometimes be shut down before it got a chance to report the exit status,
and then we got confused.
<rdar://problem/16555850>
llvm-svn: 211636
Building OS X debugserver assumes you have an Xcode installation at /Application/Xcode.app. Let's instead detect where Xcode is using xcrun.
See http://reviews.llvm.org/D4152
llvm-svn: 211074
lldb support. I'll be doing more testing & cleanup but I wanted to
get the initial checkin done.
This adds a new SBExpressionOptions::SetLanguage API for selecting a
language of an expression.
I added adds a new SBThread::GetInfoItemByPathString for retriving
information about a thread from that thread's StructuredData.
I added a new StructuredData class for representing
key-value/array/dictionary information (e.g. JSON formatted data).
Helper functions to read JSON and create a StructuredData object,
and to print a StructuredData object in JSON format are included.
A few Cocoa / Cocoa Touch data formatters were updated by Enrico
to track changes in iOS 8 / Yosemite.
Before we query a thread's extended information, the system runtime may
provide hints to the remote debug stub that it will use to retrieve values
out of runtime structures. I added a new SystemRuntime method
AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add
key-value type data to the initial request that we send to the remote stub.
The thread-format formatter string can now retrieve values out of a thread's
extended info structured data. The default thread-format string picks up
two of these - thread.info.activity.name and thread.info.trace_messages.
I added a new "jThreadExtendedInfo" packet in debugserver; I will
add documentation to the lldb-gdb-remote.txt doc soon. It accepts
JSON formatted arguments (most importantly, "thread":threadnum) and
it returns a variety of information regarding the thread to lldb
in JSON format. This JSON return is scanned into a StructuredData
object that is associated with the thread; UI layers can query the
thread's StructuredData to see if key-values are present, and if
so, show them to the user. These key-values are likely to be
specific to different targets with some commonality among many
targets. For instance, many targets will be able to advertise the
pthread_t value for a thread.
I added an initial rough cut of "thread info" command which will print
the information about a thread from the jThreadExtendedInfo result.
I need to do more work to make this format reasonably.
Han Ming added calls into the pmenergy and pmsample libraries if
debugserver is run on Mac OS X Yosemite to get information about the
inferior's power use.
I added support to debugserver for gathering the Genealogy information
about threads, if it exists, and returning it in the jThreadExtendedInfo
JSON result.
llvm-svn: 210874
(lldb) file /bin/ls
(lldb) b malloc
(lldb) run
(lldb) process save-core /tmp/ls.core
Each ObjectFile plug-in now has the option to save core files by registering a new static callback.
llvm-svn: 210864
Changes include:
- ObjectFileMachO can now determine if a binary is "*-apple-ios" or "*-apple-macosx" by checking the min OS and SDK load commands
- ArchSpec now says "<arch>-apple-macosx" is equivalent to "<arch>-apple-ios" since the simulator mixes and matches binaries (some from the system and most from the iOS SDK).
- Getting process inforamtion on MacOSX now correctly classifies iOS simulator processes so they have "*-apple-ios" architectures in the ProcessInstanceInfo
- PlatformiOSSimulator can now list iOS simulator processes correctly instead of showing nothing by using:
(lldb) platform select ios-simulator
(lldb) platform process list
- debugserver can now properly return "*-apple-ios" for the triple in the process info packets for iOS simulator executables
- GDBRemoteCommunicationClient now correctly passes along the triples it gets for process info by setting the OS in the llvm::Triple correctly
<rdar://problem/17060217>
llvm-svn: 209852
Need to spend a little more time with suppressing the debugserver 64-to-32 bit warnings.
Will re-submit after I get the warnings properly suppressed.
llvm-svn: 209151
debugserver now returns $X09 as the immediate response to
a $k kill process request rather than $W09.
ProcessGDBRemote now properly handles X as indication of
a process exit state.
The @debugserver_test and @lldb_test for $k now properly expects
an X notification (signal-caused exit) after killing a just-attached
inferior that was still in the stopped state.
llvm-svn: 209108
$qC from debugserver now returns the current thread's thread-id (and, like $?, will set a current thread if one is not already selected). Previously it was returning the current process id.
lldb will now query $qProcessInfo to retrieve the process id. The process id is now cached lazily and reset like other cached values. Retrieval of the process id will fall back to the old $qC method for vendor==Apple and os==iOS if the qProcessInfo retrieval fails.
Added a gdb remote protocol-level test to verify that $qProcessInfo reports a valid process id after launching a process, while the process is in the initial stopped state. Verifies the given process id is a currently valid process on host OSes for which we know how to check (MacOSX, Linux, {Free/Net}BSD). Ignores the live process check for OSes where we don't know how to do this. (I saw no portable way to do this in stock Python without pulling in other libs).
llvm-svn: 208241
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
condition where we could end up killing debugserver (and thus the target) before it had a chance
to detach.
Also fix debugserver to send the OK AFTER it detaches to avoid the same race condition.
<rdar://problem/16202713>
llvm-svn: 205043
Also fix the bug where lldb prints: "Got a connection and launched debugserver" rather
than the name of the process it actually launched.
llvm-svn: 202189
This change does the following:
* Adds Makefile build scripts to debug server.
* Fixes a few small mistakes in the other makefiles.
* Modifies generate-vers.pl slightly to also work for debugserver.
* Changes the OS X, non-framework python search path from libdir to
libdir/python2.X/site-packages where it is installed by the build
system (also where it is installed on other operating systems).
Patch by Keno Fischer.
llvm-svn: 199543
This gets rid of our hacky "get_random_port()" which would grab a random port and tell debugserver to open that port. Now LLDB creates, binds, listens and accepts a connection by binding to port zero and sending the correctly bound port down as the host:port to connect back to.
Fixed the "ConnectionFileDescriptor" to be able to correctly listen for connections from a specified host, localhost, or any host. Prior to this fix "listen://" only accepted the following format:
listen://<port>
But now it can accept:
listen://<port> // Listen for connection from localhost on port <port>
listen://<host>:<port> // Listen for connection from <host> and <port>
listen://*:<port> // Listen for connection from any host on port <port>
llvm-svn: 196547
This helps ensure that the launched debugserver is ready and listening for a connection. Prior to this we had a race condition.
Consolidate the launching of debugserver into a single place: a static function in GDBRemoteCommunication.
llvm-svn: 196401
Example code:
remote_platform = lldb.SBPlatform("remote-macosx");
remote_platform.SetWorkingDirectory("/private/tmp")
debugger.SetSelectedPlatform(remote_platform)
connect_options = lldb.SBPlatformConnectOptions("connect://localhost:1111");
err = remote_platform.ConnectRemote(connect_options)
if err.Success():
print >> result, 'Connected to remote platform:'
print >> result, 'hostname: %s' % (remote_platform.GetHostname())
src = lldb.SBFileSpec("/Applications/Xcode.app/Contents/SharedFrameworks/LLDB.framework", False)
dst = lldb.SBFileSpec()
# copy src to platform working directory since "dst" is empty
err = remote_platform.Install(src, dst);
if err.Success():
print >> result, '%s installed successfully' % (src)
else:
print >> result, 'error: failed to install "%s": %s' % (src, err)
Implemented many calls needed in lldb-platform to be able to install a directory that contains symlinks, file and directories.
The remote lldb-platform can now launch GDB servers on the remote system so that remote debugging can be spawned through the remote platform when connected to a remote platform.
The API in SBPlatform is subject to change and will be getting many new functions.
llvm-svn: 195273
Added two new GDB server packets to debugserver: "QSaveRegisterState" and "QRestoreRegiterState".
"QSaveRegisterState" makes the remote GDB server save all register values and it returns a save identifier as an unsigned integer. This packet can be used prior to running expressions to save all registers.
All registers can them we later restored with "QRestoreRegiterState:SAVEID" what SAVEID is the integer identifier that was returned from the call to QSaveRegisterState.
Cleaned up redundant code in lldb_private::Thread, lldb_private::ThreadPlanCallFunction.
Moved the lldb_private::Thread::RegisterCheckpoint into its own header file and it is now in the lldb_private namespace. Trimmed down the RegisterCheckpoint class to omit stuff that wasn't used (the stack ID).
Added a few new virtual methods to lldb_private::RegisterContext that allow subclasses to efficiently save/restore register states and changed the RegisterContextGDBRemote to take advantage of these new calls.
llvm-svn: 194621
- removed all gaps from the g/G packets
- optimized registers for x86_64 to not send/receive xmm0-xmm15 as well as ymm0-ymm15, now we only send ymm0-15 and xmm0-15 are now pseudo regs
- Fixed x86_64 floating point register gaps
- Fixed x86_64 so that xmm8-xmm15 don't overlap with ymm0-ymm3. This could lead to bad values showing in the debugger and was due to bad register info structure contents
- Fixed i386 so we only send ymm0-ymm7 and xmm0-xmm7 are now pseudo regs.
- Fixed ARM register definitions to not have any gaps
- Fixed it so value registers and invalidation registers are specified using register names which avoid games we had to play with register numbering in the ARM plugin.
llvm-svn: 194302
back in r173096 by Greg. When constructing a g packet or parsing a G packet,
and we're iterate over our register list, skip registers that are actually
just slices of other, real, registers. For instance, eax is 32-bits of rax
on x86_64.
<rdar://problem/15104187>
llvm-svn: 191802
the name of the remote gdb-protocol server, and get
a version number from it. This can be useful if lldb
needs to interoperate with a gdb-protocol server with
a known issue or bug.
llvm-svn: 191729
Summary:
This merge brings in the improved 'platform' command that knows how to
interface with remote machines; that is, query OS/kernel information, push
and pull files, run shell commands, etc... and implementation for the new
communication packets that back that interface, at least on Darwin based
operating systems via the POSIXPlatform class. Linux support is coming soon.
Verified the test suite runs cleanly on Linux (x86_64), build OK on Mac OS
X Mountain Lion.
Additional improvements (not in the source SVN branch 'lldb-platform-work'):
- cmake build scripts for lldb-platform
- cleanup test suite
- documentation stub for qPlatform_RunCommand
- use log class instead of printf() directly
- reverted work-in-progress-looking changes from test/types/TestAbstract.py that work towards running the test suite remotely.
- add new logging category 'platform'
Reviewers: Matt Kopec, Greg Clayton
Review: http://llvm-reviews.chandlerc.com/D1493
llvm-svn: 189295
- updated RNBDefs.h to allow version numbers to be passed in via preprocessor defines
- update libdebugserver.cpp to compile against latest DNBProcessKill signature
Review: http://llvm-reviews.chandlerc.com/D1331
llvm-svn: 188078
take for threads created while the program is running. Remove the testcase skips from TestConcurrentEvents.py,
since they all pass now, and fix TestWatchpointMultipleThreads.py - which should have caught this problem -
so it doesn't artificially break on new thread creation before the watchpoint triggers.
llvm.org/pr16566
<rdar://problem/14383244>
llvm-svn: 186132
Found a race condition when killing an application where the state could be set to exited by the waitpid_thread() _before_ we call task resume (via MachProcess::PrivateResume()) in MachProcess::Kill().
llvm-svn: 185048
Match up with top’s implementation on recent Cab as API has changed a bit.
Tested the same binary running on Zin as well. Tested ARM binary on iOS as well.
llvm-svn: 185017
for any reason, use debugserver own's cputype as a best guess when
we reply to the debugger's qProcessInfo packet or when initializing
our register tables.
<rdar://problem/13406879>
llvm-svn: 184829
support files for debugserver to fix a build failure for arm. Also
remove some of the code used for software-driven single instruction
stepping; this is slowly being yanked out and these particular bits
overlap with the nub_break_t going away.
llvm-svn: 184828
325,000 breakpoints for running "breakpoint set --func-regex ." on lldb itself (after hitting a breakpoint at main so that LLDB.framework is loaded) used to take up to an hour to set, now we are down under a minute. With warm file caches, we are at 40 seconds, and that is with setting 325,000 breakpoint through the GDB remote API. Linux and the native debuggers might be faster. I haven't timed what how much is debug info parsing and how much is the protocol traffic to/from GDB remote.
That there were many performance issues. Most of them were due to storing breakpoints in the wrong data structures, or using the wrong iterators to traverse the lists, traversing the lists in inefficient ways, and not optimizing certain function name lookups/symbol merges correctly.
Debugging after that is also now very efficient. There were issues with replacing the breakpoint opcodes in memory that was read, and those routines were also fixed.
llvm-svn: 183820
you can now specify:
debugserver host:port
debugserver port
debugserver /path/to/file
When "host" is specified, we will only accept connections from that host. If host is not specified, we default to "localhost".
llvm-svn: 183457
Most important was a new[] + delete mismatch in ScanFormatDescriptor()
and a couple of possible memory leaks in FileSpec::EnumerateDirectory().
llvm-svn: 181080
if we have an updated task_info call available; else fall back to getting
the default host-wide page size.
Update all uses of the vm page size to get it via MachVMMemory::PageSize().
<rdar://problem/13477763>, <rdar://problem/13498504>
llvm-svn: 178953
LLDB now can use a single dash for all long options for all commands form the command line and from the command interpreter. This involved just switching all calls from getopt_long() to getopt_long_only().
llvm-svn: 178789
Try and reap process when sending the "k" packet to avoid a race condition. We now wait for at most 1 second to reap the child process that we are killing.
llvm-svn: 178726
number in RNBRemote::HandlePacket_qProcessInfo -- add a new
GetCurrentThreadMachPort() so callers who need to make a mach
thred_get_state() call at the RNBRemote level will have a way to
get the port number.
llvm-svn: 178619
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
llvm-svn: 178191
to in INADDR_LOOPBACK mode by default ("localhost only")
instead of INADDR_ANY ("accept connections from any system").
Add a new command line argument to debugserver, --open-connection
or -H which will enable the previous behavior. It would be used
if you were doing two-system debugging, with lldb running on one
system and debugserver running on the other. But it is a less
common workflow and should not be the default.
<rdar://problem/12583284>
llvm-svn: 177790
- TestCase.m_thread is now filled in with the first thread that has a valid
stop reason. This eliminates the need for the SelectMyThread() functions.
- The first thread that stops for a reason is also set as the selected thread
in the process in case any command line commands are run.
- Changed launch over to take a SBLaunchInfo parameter so that the launch
function doesn't keep getting new arguments as they are needed.
- TestCase::Setup() and TestCase::Launch(SBLaunchInfo) now return bool to
indicate success of setup and launch.
- ActionWanted::Next(SBThread) was renamed to ActionWanted::StepOver(SBThread)
- ActionWanted::Finish(SBThread) was renamed to ActionWanted::StepOut(SBThread)
llvm-svn: 177376
Added logging that will show up in the system console when we try to resume a process that is already running, or has an unexpected state.
llvm-svn: 176960
Drop the old f registers from debugserver's register list. Add the
NEON 128-bit q registers to debugserver, support reading and writing.
Add the new contains / invalidates mappings for the s, d, and q
registers so lldb will know what registers overlay what other registers.
Change the default format of s and d registers to be floating point
instead of hex. Remove some UTF-8 hyphen chars in comments in the ARM
register number definition headers.
<rdar://problem/13121797>
llvm-svn: 176915
Make it configurable what to profile.
For Mac, we don't use the dirty page size yet and hence there is no need to gather that. This should be way better in not draining the battery since we are operating between 0% to 0.1% on the Mac after this change.
llvm-svn: 176451
own port namepsace) as the thread identifier to using the system-wide
globally unique thread id as the thread identifier number.
MachThread.cpp keeps both the unique id and the mach port number
for each thread. All layers outside MachThread class use the unique
id with three exceptions: (1) Mach exceptions come in with the port
number (thread_port) which needs to be translated, (2) any calls to
low-level thread_get_state/thread_set_state/thread_suspend etc need
to use the mach port number, (3) MachThreadList::UpdateThreadList
which creates the MachThread objects gets the unique id and passes
it to the MachThread ctor as an argument.
In general, any time nub_thread_t is used, it is now referring to a
unique thread id. Any time a thread_t is used, it is now referring
to a mach port number. There was some interchangability of these
types previously. nub_thread_t has also been changed to a 64-bit
type which necessitated some printf specification string changes.
I haven't been able to test these changes extensively yet but want
to checkpoint the work. The scenarios I've been testing are all
working correctly so while there may be some corner cases I haven't
hit yet, I think it is substantially correct.
<rdar://problem/12931414>
llvm-svn: 175870
Also added a TimeSpecTimeout class which can be used with any calls that take a "struct timespec *" as an argument. It is used by the KQueue class.
Also updated some project settings.
llvm-svn: 175377
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
reply to be hex encoded, not decimal.
Fix the whitespace in the container-regs/invalidate-regs
documentation, fix one ambiguous hex/decimal number in an
example.
llvm-svn: 173225
Fixed the 32, 16, and 8 bit pseudo regs for x86_64 (real reg of "rax" which subvalues "eax", "ax", etc...) to correctly get updated when stepping. Also fixed it so actual registers can specify what other registers must be invalidated when a register is modified. Previously, only pseudo registers could invalidate other registers.
Modified the LLDB qRegisterInfo extension to the GDB remote interface to support specifying the containing registers with the new "container-regs" key whose value is a comma separated list of register numbers. Also added a "invalidate-regs" key whose value is also a comma separated list of register numbers.
Removed the hack GDBRemoteDynamicRegisterInfo::Addx86_64ConvenienceRegisters() function and modified "debugserver" to specify the registers correctly using the new "container-regs" and "invalidate-regs" keys.
llvm-svn: 173096
Swap in index ids for thread ids in GDBRemoteCommunicationClient. Besides dealing with the async logic, I have to take care of the situation when the inferior paused as well.
llvm-svn: 172869
Prevent profiling from working on older debugserver. Just a simple renaming since the caller is prepared to handle the ‘unimplemented’ answer.
llvm-svn: 172583
document some simple bourne shell to re-generate these from the DNBDefs.h
header file in case this needs to be done again in the future.
llvm-svn: 172494
1. Using mach port number, just like when inferior is paused.
2. Use key:value pair of thread used time instead of comma separated notation.
llvm-svn: 172012
Add unconditional logging messages to every place in debugserver
where we send a SIGKILL signal or do a ptrace PT_KILL call to
terminate the inferior process. When the debuggee is silently
killed off, the console logging from debugserver can disambiguate
whether debugserver killed off the process because it failed to
completely set it up, becuase it was told to (via the "k" packet),
or if some external daemon killed it.
llvm-svn: 171606
Update the debugserver "qProcessInfo" implementation to return the
cpu type, cpu subtype, OS and vendor information just like qHostInfo
does so lldb can create an ArchSpec based on the returned values.
Add a new GetProcessArchitecture to GDBRemoteCommunicationClient akin
to GetHostArchitecture. If the qProcessInfo packet is supported,
GetProcessArchitecture will return the cpu type / subtype of the
process -- e.g. a 32-bit user process running on a 64-bit x86_64 Mac
system.
Have ProcessGDBRemote set the Target's architecture based on the
GetProcessArchitecture when we've completed an attach/launch/connect.
llvm-svn: 170491
This can be used by lldb to ask for information
about the process debugserver is attached to/launched.
Particularly useful on a 64-bit x86 Mac system which
can run 32-bit or 64-bit user-land processes.
llvm-svn: 170409
Prevent async and sync calls to get profile data from stomping on each other.
At the same time, don't use '$' as end delimiter per chunk of profile data.
llvm-svn: 168948
DebugClang builds of LLDB to build a properly
codesigned debugserver. I did this by adding
a DebugClang configuration to debugserver that's
just a clone of the Debug configuration.
llvm-svn: 168746
Fixed an issue where if we call "Process::Destroy()" and the process is running, if we try to stop it and get "exited" back as the stop reason, we will still deliver the exited event.
llvm-svn: 163591
calling functions. This is necessary on Mac OS X, since bad things can happen if you set
the registers of a thread that's sitting in a kernel trap.
<rdar://problem/11145013>
llvm-svn: 160756
Allow debugserver to match process names that are longer than MAXCOMLEN (16) characters. We do this by digging up argv[0] from another sysctl if the process name supplied is longer than 16 characters.
llvm-svn: 160487
Jim Ingham