Symbols in the resource COFF file should be for .rsrc$02, where the
actual resource data is, not .rsrc$01, which contains the directory
tree.
Differential Revision: https://reviews.llvm.org/D34832
Patch by Joe Ranieri.
llvm-svn: 306853
Previously we had the -type-index option which would dump the record of
a single, but we had no way to follow the dependency graph backwards and
also dump all dependent types.
Having this option makes test-writing better, because we can limit the
test to only those records that are of importance for the thing we're
trying to test, which allows us to use things like CHECK-NEXT to reduce
fragility.
Differential Revision: https://reviews.llvm.org/D34899
llvm-svn: 306852
This is prep work to add MOVBE to all Atom CPUs. This instruction didn't come in to the Nehalem/Westmere/SandyBridge/etc. line until later so there's no natural place to overlap the Atom CPUs into that part of the switch.
llvm-svn: 306849
Summary:
To enable profile hotness information in diagnostics output, Clang takes
the option `-fdiagnostics-show-hotness` -- that's "diagnostics", with an
"s" at the end. Clang also defines `CodeGenOptions::DiagnosticsWithHotness`.
LLVM, on the other hand, defines
`LLVMContext::getDiagnosticHotnessRequested` -- that's "diagnostic", not
"diagnostics". It's a small difference, but it's confusing, typo-inducing, and
frustrating.
Add a new method with the spelling "diagnostics", and "deprecate" the
old spelling.
Reviewers: anemet, davidxl
Reviewed By: anemet
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D34864
llvm-svn: 306848
Summary:
Runtime unrolling is done for loops with a single exit block and a
single exiting block (and this exiting block should be the latch block).
This patch adds logic to support unrolling in the presence of multiple exit
blocks (which also means multiple exiting blocks).
Currently this is under an off-by-default option and is supported when
epilog code is generated. Support in presence of prolog code will be in
a future patch (we just need to add more tests, and update comments).
This patch is essentially an implementation patch. I have not added any
heuristic (in terms of branches added or code size) to decide when
this should be enabled.
Reviewers: mkuper, sanjoy, reames, evstupac
Reviewed by: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33001
llvm-svn: 306846
Summary:
An attempt to reland D34786 (which caused bot failres on Mac), now with
properly intercepted operators new() and delete().
LSan allocator used to always return nullptr on too big allocation requests
(the definition of "too big" depends on platform and bitness), now it
follows policy configured by allocator_may_return_null flag
Reviewers: eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34845
llvm-svn: 306845
clang-apply-replacements tests
The ClassReplacements.cpp test in the clang-rename tests uses
clang-apply-replacements. I moved it back to the clang-tools-extra repository
for now to ensure that the clang-rename tests can pass when clang is compiled
without clang-tools-extra.
llvm-svn: 306843
This fixes a cmake configuration issue when LLVM is configured with no targets.
Instead we need to add TestingSupport directly with target_link_libraries.
llvm-svn: 306842
Summary:
Some transforms assume that DT.verifyDomInfo() is not expensive and call it even when ENABLE_EXPENSIVE_CHECKS is not set.
This patch disables expensive Dominator Tree verification (reachability, parent property, sibling property) to fix
[[ https://bugs.llvm.org/show_bug.cgi?id=33656 | PR33656 ]].
Note that this is only a temporary fix.
Reviewers: dberlin, chapuni, kparzysz, grosser
Reviewed By: dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34894
llvm-svn: 306839
This fixes an issue with the emission of lifetime markers for struct-returning Obj-C msgSend calls. When the result of a struct-returning call is ignored, the temporary storage is only marked with lifetime markers in one of the two branches of the nil-receiver-check. The check is, however, not required when the result is unused. If we still need to emit the check (due to consumer arguments), let's not emit the memset to zero out the result if it's unused. This fixes a use-after-scope false positive with AddressSanitizer.
Differential Revision: https://reviews.llvm.org/D34834
llvm-svn: 306838
This fixes an issue with the emission of lifetime markers for struct-returning Obj-C msgSend calls. When the result of a struct-returning call is ignored, the temporary storage is only marked with lifetime markers in one of the two branches of the nil-receiver-check. The check is, however, not required when the result is unused. If we still need to emit the check (due to consumer arguments), let's not emit the memset to zero out the result if it's unused. This fixes a use-after-scope false positive with AddressSanitizer.
Differential Revision: https://reviews.llvm.org/D34834
llvm-svn: 306837
Summary:
In `sanitizer_allocator_primary32.h`:
- rounding up in `MapWithCallback` is not needed as `MmapOrDie` does it. Note
that the 64-bit counterpart doesn't round up, this keeps the behavior
consistent;
- since `IsAligned` exists, use it in `AllocateRegion`;
- in `PopulateFreeList`:
- checking `b->Count` to be greater than 0 when `b->Count() == max_count` is
redundant when done more than once. Just check that `max_count` is greater
than 0 out of the loop; the compiler (at least on ARM) didn't optimize it;
- mark the batch creation failure as `UNLIKELY`;
In `sanitizer_allocator_primary64.h`:
- in `MapWithCallback`, mark the failure condition as `UNLIKELY`;
In `sanitizer_posix.h`:
- mark a bunch of Mmap related failure conditions as `UNLIKELY`;
- in `MmapAlignedOrDieOnFatalError`, we have `IsAligned`, so use it; rearrange
the conditions as one test was redudant;
- in `MmapFixedImpl`, 30 chars was not large enough to hold the message and a
full 64-bit address (or at least a 48-bit usermode address), increase to 40.
Reviewers: alekseyshl
Reviewed By: alekseyshl
Subscribers: aemerson, kubamracek, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34840
llvm-svn: 306834
This reverts commit da6318a92fba793e4f2447ec478b001392d57d43.
This is causing failures on some build bots due to what appears
to be some kind of lit ordering dependency.
llvm-svn: 306833
Presently lit leaks files in the tests' output directories.
Specifically, if a test creates output files, lit makes no
effort to remove them prior to the next test run. This is
problematic because it leads to false positives whenever a
test passes because stale files were present. In general
it is a source of flakiness that should be removed.
This patch addresses this by building the list of all test
directories that are part of the current run set, and then
deleting those directories and recreating them anew. This
gives each test a clean baseline to start from.
Differential Revision: https://reviews.llvm.org/D34732
llvm-svn: 306832
In particular, use CALL16 (similar to O32) for address loads into T9 for certain
cases. Otherwise use a %got_disp relocation to load the address of a symbol.
Small offsets (small enough to fit in a 16-bit signed immediate) can be used and
are added to the symbol address after it is loaded from the GOT. Larger offsets
are currently unsupported and result in an error from the assembler.
Reviewers: sdardis
Reviewed By: sdardis
Patch by: John Baldwin
Subscribers: llvm-commits, seanbruno, arichardson, emaste, dim
Differential Revision: https://reviews.llvm.org/D33948
llvm-svn: 306831
This changes CrossWindows to look for -nostdinc instead of -nostdlibinc.
In addition, fixes a bug where -isystem-after options would be dropped
when called with -nostdinc.
Patch by Dave Lee!
llvm-svn: 306829
Summary:
When linking a regular LTO module, if it has any non-prevailing values
(dropped to available_externally) in comdats, we need to do more than
just remove those values from their comdat. We also remove all values
from that comdat, so as to avoid leaving an incomplete comdat.
This is necessary in case we are compiling in mixed regular and ThinLTO
mode, since the resulting regularLTO native object is always linked into
the final binary first. We need to prevent the linker from selecting an
incomplete comdat that was not the prevailing copy.
Fixes PR32980.
Reviewers: pcc, rafael
Subscribers: mehdi_amini, david2050, llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D34803
llvm-svn: 306826
This is a more principled version of r303756. That change was both very
brittle about the state of the Diags object going into the driver and
also broke tooling in funny ways.
In particular it prevented tools from capturing diagnostics properly and
made the compilation database logic fail to provide arguments to the
tool, falling back to scanning directories for JSON files.
llvm-svn: 306822
There are a few instructions provided by the high-word facility (z196)
that we cannot easily exploit for code generation. This patch at least
adds those missing instructions for the assembler and disassembler.
This means that now all nonprivileged instructions up to z13 are
supported by the LLVM assembler / disassembler.
llvm-svn: 306821
As discussed in D34087, rewrite areNonVolatileConsecutiveLoads using
generic checks. Also, propagate missing local handling from there to
BaseIndexOffset checks.
Tests of note:
* test/CodeGen/X86/build-vector* - Improved.
* test/CodeGen/BPF/undef.ll - Improved store alignment allows an
additional store merge
* test/CodeGen/X86/clear_upper_vector_element_bits.ll - This is a
case we already do not handle well. Here, the DAG is improved, but
scheduling causes a code size degradation.
Reviewers: RKSimon, craig.topper, spatel, andreadb, filcab
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D34472
llvm-svn: 306819
That may be useful if we want to produce or parse object containing
broken relocation values using yaml2obj/obj2yaml.
Previously that was impossible because only enum values were parsed
correctly, this patch allows to put any numeric value as a
relocation type.
Differential revision: https://reviews.llvm.org/D34758
llvm-svn: 306814
This is PR28414.
Previously LLD was unable to link following:
(failed with undefined symbol bar)
```
Version script:
SOME_VERSION { global: *; };
.global _start
.global bar
.symver _start, bar@@SOME_VERSION
_start:
jmp bar
```
Manual has next description:
//
.symver name, name2@@nodename
In this case, the symbol name must exist and be defined within the file being assembled. It is similar to name2@nodename.
**The difference is name2@@nodename will also be used to resolve references to name2 by the linker**
https://sourceware.org/binutils/docs/as/Symver.html
//
Patch implements that. If we have name@@ver symbol and name is undefined,
name@@ver is used to resolve references to name.
Differential revision: https://reviews.llvm.org/D33680
llvm-svn: 306813
Current implementation looks a bit confusing. It looks like it should
report/print something on error, but it does not do that.
It silently drops a error message when creating triple, though
this behavior is fine generally.
For example if LLVM configured with -DLLVM_TARGETS_TO_BUILD=ARM and
our host is windows, it is expected that we will be unable to
create "i386-pc-windows-msvc" target.
Patch introduces isConfigurationSupported() function that checks
if current configuration is supported for each test and returns early if not.
llvm-svn: 306812
In r301116, a custom lowering needed to be introduced to be able to
legalize 8 and 16-bit divisions on ARM targets without a division
instruction, since 2-step legalization (WidenScalar from 8 bit to 32
bit, then Libcall the 32-bit division) doesn't work.
This fixes this and makes this kind of multi-step legalization, where
first the size of the type needs to be changed and then some action is
needed that doesn't require changing the size of the type,
straighforward to specify.
Differential Revision: https://reviews.llvm.org/D32529
llvm-svn: 306806
This introduces helper functions that set target defines for different ARMV8-A
architecture kinds. It fixes an issue that the v8.1 define ARM_FEATURE_QRDMX
was not set for v8.2. These helper functions make things more “scalable” if we
want to add ARMv8.3 at some point, and a cleanup has been done to hold the
architecture kind in one variable (instead of one for each).
Differential Revision: https://reviews.llvm.org/D34686
llvm-svn: 306805
Eric Beckmann