Remove setPreservesCFG from ARMConstantIslandPass and add a couple
of -verify-machine-dom-info instances into the existing codegen
tests.
llvm-svn: 372126
Before this patch we gave a priority to a dynamic table found
from the section header.
It was discussed (here: https://reviews.llvm.org/D67078?id=218356#inline-602082)
that probably preferring the table from PT_DYNAMIC is better,
because it is what runtime loader sees.
This patch makes the table from PT_DYNAMIC be chosen at first place if it is available.
But also it adds logic to fall back to SHT_DYNAMIC if the table from the dynamic segment is
broken or fall back to use no table if both are broken.
It adds a few more diagnostic warnings for the logic above.
Differential revision: https://reviews.llvm.org/D67547
llvm-svn: 372122
The static analyzer is warning about potential null dereferences of dyn_cast<> results, we can use cast<> directly as we know that these cases should all be CastInst, which is why its working atm and anyway cast<> will assert if they aren't.
llvm-svn: 372116
MVE loads and stores have a 7 bit immediate range, scaled by the length of the type. This needs to be taught to the stack estimation code to ensure that an emergency spill slot is reserved in case we run out of registers when materialising stack indices.
Also the narrowing loads/stores can be created with frame indices even though they do not accept SP as a register. We need in those cases to make sure we have an emergency register to use as the frame base, as SP can never be used.
Differential Revision: https://reviews.llvm.org/D67327
llvm-svn: 372114
Summary:
This makes the input file for a new test added in r372060 directly
available in the Inputs subdirectory of the test dir.
Differential Revision: https://reviews.llvm.org/D67655
llvm-svn: 372112
Converting the *LoopStart pseudo instructions into DLS/WLS results in
LR being defined. These instructions were inserted on the assumption
that LR would already contain the loop counter because a mov is
introduced during ISel as the the consumers in the loop can only use
LR. That assumption proved wrong!
So perform a safety check, finding an appropriate place to insert the
DLS/WLS instructions or revert if this isn't possible.
Differential Revision: https://reviews.llvm.org/D67539
llvm-svn: 372111
We had a precompiled binary committed and not all of the relocations
supported were tested. This patch fixes this.
Differential revision: https://reviews.llvm.org/D67617
llvm-svn: 372110
We do not support them and fail with llvm_unreachable currently.
This is not the only target we do not support and also seems we are missing
the tests for those we have already. But I needed this one for another patch,
so posted it separatelly.
Relocation names are taken from llvm\include\llvm\BinaryFormat\ELFRelocs\PowerPC64.def
Differential revision: https://reviews.llvm.org/D67615
llvm-svn: 372109
Currently we only allow using a known named constants
for `Machine` field in YAML documents.
This patch allows using any numbers (valid or "unknown")
and adds test cases for current and new functionality.
With this it is possible to write a test cases for really unknown
EM_* targets.
Differential revision: https://reviews.llvm.org/D67652
llvm-svn: 372108
Follow-up to r371983. Referring to "this program" in the description of
the --version option in the documentation isn't exactly correct, because
the docs are not part of the program, and so "this program" doesn't
really refer to anything. This patch brings the other users of this
terminology into line with the new updates to llvm-size and
llvm-strings.
Reviewed by: alexshap, MaskRay
Differential Revision: https://reviews.llvm.org/D67618
llvm-svn: 372107
Most of the test changes are trivial instruction reorderings and differing
register allocations, without any obvious performance impact.
Differential Revision: https://reviews.llvm.org/D66973
llvm-svn: 372106
Summary:
There were segfaults as we modified and iterated the instruction maps in
the cache at the same time. This was happening because we created new
instructions while we populated the cache. This fix changes the order
in which we perform these actions. First, the caches for the whole
module are created, then we start to create abstract attributes.
I don't have a unit test but the LLVM test suite exposes this problem.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67232
llvm-svn: 372105
Summary:
Adds Semantic Ranges capabilities to Clangd server.
Also adds tests for running it via clangd server.
This differs from the LSP spec as the spec needs this to be evaluated on multiple 'pos' and the expected output is an list of list of semantic ranges.
This is majorly for multi cursor and assuming this is a rare thing, we don't want to optimize make things complicated just for this.
This should be done in the LSP level by queueing one request per 'pos' in the input.
LSP Spec:
https://github.com/microsoft/language-server-protocol/blob/dbaeumer/3.15/specification.md#textDocument_selectionRange
Reviewers: hokein
Subscribers: ilya-biryukov, MaskRay, jkorous, arphaman, kadircet, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D67650
llvm-svn: 372102
* Reordered MVT simple types to group scalable vector types
together.
* New range functions in MachineValueType.h to only iterate over
the fixed-length int/fp vector types.
* Stopped backends which don't support scalable vector types from
iterating over scalable types.
Reviewers: sdesmalen, greened
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D66339
llvm-svn: 372099
D67284 introduced ARMErrataFix.cpp which was derived from
AArch64ErrataFix.cpp. There were some useful refactoring changes made to
ARMErrataFix.cpp made as part of the review. This change applies the
relevant changes back to AArch64ErrataFix.cpp.
Main changes are:
- Old style variable names in comments like IS, are now new style isec.
- Simplify init() collection of mappingSymbols to always start with a code
mapping symbol.
- Simplify logic in mergeCmp().
- Fix one 80 column overflow caused by IS -> isec transformation.
Differential Revision: https://reviews.llvm.org/D67622
llvm-svn: 372094
Fix processing of "C" packet with signal for the whole process to
default signal value for action list to LLDB_INVALID_SIGNAL_NUMBER
rather than 0.
Differential Revision: https://reviews.llvm.org/D67625
llvm-svn: 372090
Support `llvm-ar h` and `llvm-ar -h` because they may be what users try
at first. Note, operation 'h' is undocumented in GNU ar.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D67560
llvm-svn: 372088
The "TODO" mentioned was:
"Add test for symbol with no name but with a value once yaml2obj allows
referencing symbols with no name from relocations."
We can do it now.
Differential revision: https://reviews.llvm.org/D67609
llvm-svn: 372087
The low-overhead branch extension provides a loop-end 'LE' instruction
that performs no decrement nor compare, it just jumps backwards. This
patch modifies the constant islands pass to try to insert LE
instructions in place of a Thumb2 conditional branch, instead of
shrinking it. This only happens if a cmp can be converted to a cbn/z
and used to exit the loop.
Differential Revision: https://reviews.llvm.org/D67404
llvm-svn: 372085
We use `< UP.Threshold` later on, so we should use LoopSize + 1, to
allow unrolling if the result won't exceed to loop size.
Fixes PR43305.
Reviewers: efriedma, dmgreen, paquette
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D67594
llvm-svn: 372084
It's a straightforward refactoring that allows to simplify and encapsulate the code.
Differential revision: https://reviews.llvm.org/D67624
llvm-svn: 372083
Specifying the vectorization width was supposed to implicitly enable
vectorization, except that it wasn't really doing this. It was only
setting the vectorize.width metadata, but not vectorize.enable.
This should fix PR27643.
Differential Revision: https://reviews.llvm.org/D66290
llvm-svn: 372082
It is possible to use yaml2obj to create sections with overlapping sh_offset now.
This patch does that.
Differential revision: https://reviews.llvm.org/D67610
llvm-svn: 372081
RISC-V GCC use -mcmodel=medany and -mcmodel=medlow, but LLVM use
-mcmodel=small and -mcmodel=medium.
Add those two option aliases for provide same user interface between
GCC and LLVM.
Reviewed By: lenary
Differential Revision: https://reviews.llvm.org/D67066
llvm-svn: 372080
This patch adds -Oz as option and also properly enables support for -Os.
Currently, the existing check for -Os is dead, because the enclosing if
only checks of O1, O2 and O3.
There is still a difference between the -Oz pipeline compared to opt,
but I have not been able to track that down yet.
Reviewers: bogner, sebpop, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D67593
llvm-svn: 372079
RISC-V LLVM was only implement small/medlow code model, so it defined
__riscv_cmodel_medlow directly without check.
Now, we have medium/medany code model in RISC-V back-end, it should
define according the actually code model.
Reviewed By: lewis-revill
Differential Revision: https://reviews.llvm.org/D67065
llvm-svn: 372078
Set this bit for the MVE reduction instructions to prevent a loop from
becoming tail predicated in their presence.
Differential Revision: https://reviews.llvm.org/D67444
llvm-svn: 372076
Benjamin Kramer