lldb_private::DataExtractor contains DataBufferSP m_data_sp which is
relatively expensive to copy (due to multi-threading locking).
llvm::DataExtractor does not have this problem as it uses StringRef
instead.
The copy constructor is explicit as otherwise it is easy to make
unintended modification of a local copy instead of a caller's instance
(D107470 but that is llvm::DataExtractor).
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D107485
The type field is a signed integer.
(https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html)
However it's not packed in the packet in the way
you might think. For example the type -1 should be:
qMemTags:<addr>,<len>:ffffffff
Instead of:
qMemTags:<addr>,<len>:-1
This change makes lldb-server's parsing more strict
and adds more tests to check that we handle negative types
correctly in lldb and lldb-server.
We only support one tag type value at this point,
for AArch64 MTE, which is positive. So this doesn't change
any of those interactions. It just brings us in line with GDB.
Also check that the test target has MTE. Previously
we just checked that we were AArch64 with a toolchain
that supports MTE.
Finally, update the tag type check for QMemTags to use
the same conversion steps that qMemTags now does.
Using static_cast can invoke UB and though we do do a limit
check to avoid this, I think it's clearer with the new method.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D104914
This adds memory tag writing to Process and the
GDB remote code. Supporting work for the
"memory tag write" command. (to follow)
Process WriteMemoryTags is similair to ReadMemoryTags.
It will pack the tags then call DoWriteMemoryTags.
That function will send the QMemTags packet to the gdb-remote.
The QMemTags packet follows the GDB specification in:
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
Note that lldb-server will be treating partial writes as
complete failures. So lldb doesn't need to handle the partial
write case in any special way.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105181
Change SetCurrentThread*() logic not to include the zero padding
in PID/TID that was a side effect of 02ef0f5ab4. This should fix
problems caused by sending 64-bit integers to 32-bit servers. Reported
by Ted Woodward.
Differential Revision: https://reviews.llvm.org/D106832
This patch adds the ability to get a DWARFDIE's children as an LLVM range.
This way we can use for range loops to iterate over them and we can use LLVM's
algorithms like `llvm::all_of` to query all children.
The implementation has to do some small shenanigans as the iterator needs to
store a DWARFDIE, but a DWARFDIE container is also a DWARFDIE so it can't return
the iterator by value. I just made the `children` getter a templated function to
avoid the cyclic dependency.
Reviewed By: #lldb, werat, JDevlieghere
Differential Revision: https://reviews.llvm.org/D103172
PackTags is used by to compress tags to go in the QMemTags packet
and be passed to ptrace when writing memory tags.
The behaviour of RepeatTagsForRange matches that described for QMemTags
in the GDB documentation:
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
In addition, unpacking tags with number of tags 0 now means
do not check that number of tags matches the range.
This will be used by lldb-server to unpack tags before repeating
them to fill the requested range.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105179
Previously GetMemoryTagManager checked many things in one:
* architecture supports memory tagging
* process supports memory tagging
* memory range isn't inverted
* memory range is all tagged
Since writing follow up patches for tag writing (in review
at the moment) it has become clear that this gets unwieldy
once we add the features needed for that.
It also implies that the memory tag manager is tied to the
range you used to request it with but it is not. It's a per
process object.
Instead:
* GetMemoryTagManager just checks architecture and process.
* Then the MemoryTagManager can later be asked to check a
memory range.
This is better because:
* We don't imply that range and manager are tied together.
* A slightly diferent range calculation for tag writing
doesn't add more code to Process.
* Range checking code can now be unit tested.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105630
This reverts commit 82a3883715.
The original version had a copy-paste error: using the Interrupt timeout
for the ResumeSynchronous wait, which is clearly wrong. This error would
have been evident with real use, but the interrupt is long enough that it
only caused one testsuite failure (in the Swift fork).
Anyway, I found that mistake and fixed it and checked all the other places
where I had to plumb through a timeout, and added a test with a short
interrupt timeout stepping over a function that takes 3x the interrupt timeout
to complete, so that should detect a similar mistake in the future.
Refactor SetCurrentThread() and SetCurrentThreadForRun() to reduce code
duplication and simplify it. Both methods now call common
SendSetCurrentThreadPacket() that implements the common protocol
exchange part (the only variable is sending `Hg` vs `Hc`) and returns
the selected TID. The logic is rewritten to use a StreamString
instead of snprintf().
A side effect of the change is that thread-id sent is now zero-padded.
However, this should not have practical impact on the server as both
forms are equivalent.
Differential Revision: https://reviews.llvm.org/D100459
This patch implements a slight improvement when debugging across
platforms and remapping source paths that are in a non-native
format. See the unit test for examples.
rdar://79205675
Differential Revision: https://reviews.llvm.org/D104407
These were disabled in 473a3a773e
because they failed on 32 bit platforms. (Arm for sure but I assume
any 32 bit)
This was due to the printf formatter used. These assumed
that types like uint64_t/size_t would be certain size/type and
that changes on 32 bit.
Instead use "z" to print the size_t and PRI<...> formatters
for the addr_t (always uint64_t) and the int32_t.
This adds GDB client support for the qMemTags packet
which reads memory tags. Following the design
which was recently committed to GDB.
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
(look for qMemTags)
lldb commands will use the new Process methods
GetMemoryTagManager and ReadMemoryTags.
The former takes a range and checks that:
* The current process architecture has an architecture plugin
* That plugin provides a MemoryTagManager
* That the range of memory requested lies in a tagged range
(it will expand it to granules for you)
If all that was true you get a MemoryTagManager you
can give to ReadMemoryTags.
This two step process is done to allow commands to get the
tag manager without having to read tags as well. For example
you might just want to remove a logical tag, or error early
if a range with tagged addresses is inverted.
Note that getting a MemoryTagManager doesn't mean that the process
or a specific memory range is tagged. Those are seperate checks.
Having a tag manager just means this architecture *could* have
a tagging feature enabled.
An architecture plugin has been added for AArch64 which
will return a MemoryTagManagerAArch64MTE, which was added in a
previous patch.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D95602
This adds the MemoryTagManager class and a specialisation
of that class for AArch64 MTE tags. It provides a generic
interface for various tagging operations.
Adding/removing tags, diffing tagged pointers, etc.
Later patches will use this manager to handle memory tags
in generic code in both lldb and lldb-server.
Since it will be used in both, the base class header is in
lldb/Target.
(MemoryRegionInfo is another example of this pattern)
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97281
LLDB supports having globbing regexes in the process launch arguments that will
be resolved using the user's shell. This requires that we pass the launch args
to the shell and then read back the expanded arguments using LLDB's argdumper
utility.
As the shell will not just expand the globbing regexes but all special
characters, we need to escape all non-globbing charcters such as $, &, <, >,
etc. as those otherwise are interpreted and removed in the step where we expand
the globbing characters. Also because the special characters are shell-specific,
LLDB needs to maintain a list of all the characters that need to be escaped for
each specific shell.
This patch adds the list of special characters that need to be escaped for
`zsh`. Without this patch on systems where `zsh` is the user's shell (like on
all macOS systems) having any of these special characters in your arguments or
path to the binary will cause the process launch to fail. E.g., `lldb -- ./calc
1<2` is failing without this patch. The same happens if the absolute path to
`calc` is in a directory that contains for example parentheses or other special
characters.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D104627
Rust's v0 name mangling scheme [1] is easy to disambiguate from other
name mangling schemes because symbols always start with `_R`. The llvm
Demangle library supports demangling the Rust v0 scheme. Use it to
demangle Rust symbols.
Added unit tests that check simple symbols. Ran LLDB built with this
patch to debug some Rust programs compiled with the v0 name mangling
scheme. Confirmed symbol names were demangled as expected.
Note: enabling the new name mangling scheme requires a nightly
toolchain:
```
$ cat main.rs
fn main() {
println!("Hello world!");
}
$ $(rustup which --toolchain nightly rustc) -Z symbol-mangling-version=v0 main.rs -g
$ /home/asm/hacking/llvm/build/bin/lldb ./main --one-line 'b main.rs:2'
(lldb) target create "./main"
Current executable set to '/home/asm/hacking/llvm/rust/main' (x86_64).
(lldb) b main.rs:2
Breakpoint 1: where = main`main::main + 4 at main.rs:2:5, address = 0x00000000000076a4
(lldb) r
Process 948449 launched: '/home/asm/hacking/llvm/rust/main' (x86_64)
warning: (x86_64) /lib64/libgcc_s.so.1 No LZMA support found for reading .gnu_debugdata section
Process 948449 stopped
* thread #1, name = 'main', stop reason = breakpoint 1.1
frame #0: 0x000055555555b6a4 main`main::main at main.rs:2:5
1 fn main() {
-> 2 println!("Hello world!");
3 }
(lldb) bt
error: need to add support for DW_TAG_base_type '()' encoded with DW_ATE = 0x7, bit_size = 0
* thread #1, name = 'main', stop reason = breakpoint 1.1
* frame #0: 0x000055555555b6a4 main`main::main at main.rs:2:5
frame #1: 0x000055555555b78b main`<fn() as core::ops::function::FnOnce<()>>::call_once((null)=(main`main::main at main.rs:1), (null)=<unavailable>) at function.rs:227:5
frame #2: 0x000055555555b66e main`std::sys_common::backtrace::__rust_begin_short_backtrace::<fn(), ()>(f=(main`main::main at main.rs:1)) at backtrace.rs:125:18
frame #3: 0x000055555555b851 main`std::rt::lang_start::<()>::{closure#0} at rt.rs:49:18
frame #4: 0x000055555556c9f9 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] core::ops::function::impls::_$LT$impl$u20$core..ops..function..FnOnce$LT$A$GT$$u20$for$u20$$RF$F$GT$::call_once::h04259e4a34d07c2f at function.rs:259:13
frame #5: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panicking::try::do_call::hb8da45704d5cfbbf at panicking.rs:401:40
frame #6: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panicking::try::h4beadc19a78fec52 at panicking.rs:365:19
frame #7: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panic::catch_unwind::hc58016cd36ba81a4 at panic.rs:433:14
frame #8: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a at rt.rs:34:21
frame #9: 0x000055555555b830 main`std::rt::lang_start::<()>(main=(main`main::main at main.rs:1), argc=1, argv=0x00007fffffffcb18) at rt.rs:48:5
frame #10: 0x000055555555b6fc main`main + 28
frame #11: 0x00007ffff73f2493 libc.so.6`__libc_start_main + 243
frame #12: 0x000055555555b59e main`_start + 46
(lldb)
```
[1]: https://github.com/rust-lang/rust/issues/60705
Reviewed By: clayborg, teemperor
Differential Revision: https://reviews.llvm.org/D104054
This adds a basic SB API for creating and stopping traces.
Note: This doesn't add any APIs for inspecting individual instructions. That'd be a more complicated change and it might be better to enhande the dump functionality to output the data in binary format. I'll leave that for a later diff.
This also enhances the existing tests so that they test the same flow using both the command interface and the SB API.
I also did some cleanup of legacy code.
Differential Revision: https://reviews.llvm.org/D103500
DWARF doesn't describe templates itself but only actual template instantiations.
Because of that LLDB has to infer the parameters of the class template
declarations from the actual instantiations when creating the internal Clang AST
from debug info
Because there is no dedicated DIE for the class template, LLDB also creates the
`ClassTemplateDecl` implicitly when parsing a template instantiation. To avoid
creating one ClassTemplateDecls for every instantiation,
`TypeSystemClang::CreateClassTemplateDecl` will check if there is already a
`ClassTemplateDecl` in the requested `DeclContext` and will reuse a found
fitting declaration.
The logic that checks if a found class template fits to an instantiation is
currently just comparing the name of the template. So right now we map
`template<typename T> struct S;` to an instantiation with the values `S<1, 2,
3>` even though they clearly don't belong together.
This causes crashes later on when for example the Itanium mangler's
`TemplateArgManglingInfo::needExactType` method tries to find fitting the class
template parameter that fits to an instantiation value. In the example above it
will try to find the parameter for the value `2` but will just trigger a
boundary check when retrieving the parameter with index 1 from the class
template.
There are two ways we can end up with an instantiation that doesn't fit to a
class template with the same name:
1. We have two TUs with two templates that have the same name and internal
linkage.
2. A forward declared template instantiation is emitted by GCC and Clang
without an empty list of parameter values.
This patch makes the check for whether a class template declaration can be
reused more sophisticated by also comparing whether the parameter values can fit
to the found class template. If we can't find a fitting class template we
justcreate a second class template with the fitting parameters.
Fixes rdar://76592821
Reviewed By: kastiglione
Differential Revision: https://reviews.llvm.org/D100662
Test leaks if we run
tools/lldb/unittests/Host/HostTests without --gtest_filter
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104091
It seems std::ostringstream ignores NaN signs on Darwin while it prints them on
Linux. This causes that LLDB behaves differently on those platforms which is
both confusing for users and it also means we have to deal with that in our
tests.
This patch manually implements the NaN/Inf printing (which are apparently
implementation defined) to make LLDB print the same thing on all platforms. The
only output difference in practice seems to be that we now print negative NaNs
as `-nan`, but this potentially also changes the output on other systems I
haven't tested this on.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102845
The added DumpDataExtractorTest uncovered that this is lshifting a negative
integer which upsets ubsan and breaks the sanitizer bot. This patch just
changes the variable we shift to be unsigned and adds a bunch of tests to make
sure this function does what it promises.
This reverts commit bd5751f3d2.
This patch series is causing us to every so often miss switching
the state from eStateRunning to eStateStopped when we get the stop
packet from the debug server.
Reverting till I can figure out how that could be happening.
ProcessGDBRemote plugin layers.
Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after the timeout, we would break out
the switch, but then since we immediately check if the response is
empty & fail if it is, we could end up actually only giving a
small interval to the interrupt.
Differential Revision: https://reviews.llvm.org/D102085
A type system is not guaranteed to have a symbol file. This patch adds null-pointer checks so we don't crash when trying to access a type system's symbol file.
Reviewed By: aprantl, teemperor
Differential Revision: https://reviews.llvm.org/D101539
Fix cases that can crash `SBStructuredData::operator=`.
This happened in a case where `rhs` had a null `SBStructuredDataImpl`.
Differential Revision: https://reviews.llvm.org/D101585
This patch should fix the windows test failure following `3e2ed7440569`.
It makes use of a `SourceLocationSpec` object when resolving a symbol
context from `SymbolFilePDB` file.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch refactors a good part of the code base turning the usual
FileSpec, Line, Column, CheckInlines, ExactMatch arguments into a
SourceLocationSpec object.
This change is required for a following patch that will add handling of the
column line information when doing symbol resolution.
Differential Revision: https://reviews.llvm.org/D100965
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
A source location specifier class that holds a Declaration object containing
a FileSpec with line and column information. The column line is optional.
It also holds search flags that can be fetched by resolvers to look inlined
declarations and/or exact matches.
It describes a specific location in a source file and allows the user
to perform checks and comparaisons between multiple instances of that class.
Differential Revision: https://reviews.llvm.org/D100962
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch moves the Declaration class from the Symbol library to the
Core library. This will allow to use it in a more generic fashion and
aims to lower the dependency cycles when it comes to the linking.
The patch also does some cleaning up by making column information
permanent and removing the LLDB_ENABLE_DECLARATION_COLUMNS directives.
Differential revision: https://reviews.llvm.org/D101556
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
* Using a base address or skipping it with LLDB_INVALID_ADDRESS
* Using a data offset, which does not effect the printed addresses
* Not providing an output stream
* Formatting a double sized HexFloat
* Formatting over multiple lines
Since address printing now has its own test,
I've removed the base address from all the format
type tests.
The multi line tests still use a base address to check that
it's incremented correctly for each new line.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D101627
Covering basic cases where you have 1 item on 1 line.
Apart from eFormatCharArray, where using multiple lines
highlights the difference between it and eFormatVectorOfChar.
Reviewed By: #lldb, teemperor
Differential Revision: https://reviews.llvm.org/D101453
Add a NativeDelegate API to pass new processes (forks) to LLGS,
and support detaching them via the 'D' packet. A 'D' packet without
a specific PID detaches all processes, otherwise it detaches either
the specified subprocess or the main process, depending on the passed
PID.
Differential Revision: https://reviews.llvm.org/D100191
Just fixing a few things I noticed as I am working on another feature for format
strings in the prompt: forward decls, adding constexpr constructors, various
checks, and unit tests for FormatEntity::Parse and new Definition constructors,
etc.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D98153
Support registering multiple callbacks for a single signal. This is
necessary to support multiple co-existing native process instances, with
separate SIGCHLD handlers.
The system signal handler is registered on first request, additional
callback are added on subsequent requests. The system signal handler
is removed when last callback is unregistered.
Differential Revision: https://reviews.llvm.org/D100418
If the debug info is missing the terminating null die, we would crash
when trying to access the nonexisting children/siblings. This was
discovered because the test case for D98619 accidentaly produced such
input.
This fixes (works around) two errors with gcc-6.5.
- in the RegisterContext_x86 files, gcc is unable to synthesize a
default constructor -- it thinks it needs to initialize the virtual
base class, even though said classes are abstract. I fix that by
providing a dummy constructor.
- In ReproducerInstrumentationTest, it is not able to deduce that the
TestingRegistry class is movable (it contains a map of unique
pointers). I change the type from Optional<TestingRegistry> to
unique_ptr<TestingRegistry), so that moving is not required
(copying/moving a polymorphic type is not a very good idea in any
case).
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
Add a minimal support for the multiprocess extension in lldb-server.
The server indicates support for it via qSupported, and accepts
thread-ids containing a PID. However, it still does not support
debugging more than one inferior, so any other PID value results
in an error.
Differential Revision: https://reviews.llvm.org/D98482
This test is not useful as the functions it's testing are just returning
a constant. It also fails in unoptimized builds as it's comparing
character strings by address.
When LLVM error handling was introduced to the parsing of the .debug_aranges it would cause major issues if any DWARFDebugArangeSet::extract() calls returned any errors. The code in DWARFDebugInfo::GetCompileUnitAranges() would end up calling DWARFDebugAranges::extract() which would return an error if _any_ DWARFDebugArangeSet had any errors, but it default constructed a DWARFDebugAranges object into DWARFDebugInfo::m_cu_aranges_up and populated it partially, and returned an error prior to finishing much needed functionality in the DWARFDebugInfo::GetCompileUnitAranges() function. Subsequent callers to this function would see that the DWARFDebugInfo::m_cu_aranges_up was actually valid and return this partially populated DWARFDebugAranges reference _and_ it would not be sorted or minimized.
This above bugs would cause an incomplete .debug_aranges parsing, it would skip manually parsing any compile units for ranges, and would not sort the DWARFDebugAranges in m_cu_aranges_up.
This bug would also cause breakpoints set by file and line to fail to set correctly if a symbol context for an address could not be resolved properly, which the incomplete and unsorted DWARFDebugAranges object that DWARFDebugInfo::GetCompileUnitAranges() returned would cause symbol context lookups resolved by address (breakpoint address) to fail to find any DWARF debug info for a given address.
This patch fixes all of the issues that I found:
- DWARFDebugInfo::GetCompileUnitAranges() no longer returns a "llvm::Expected<DWARFDebugAranges &>", but just returns a "const DWARFDebugAranges &". Why? Because this code contained a fallback that would parse all of the valid DWARFDebugArangeSet objects, and would check which compile units had valid .debug_aranges set entries, and manually build an address ranges table using DWARFUnit::BuildAddressRangeTable(). If we return an error because any DWARFDebugArangeSet has any errors, then we don't do any of this code. Now we parse all DWARFDebugArangeSet objects that have no errors, if any calls to DWARFDebugArangeSet::extract() return errors, we skip that DWARFDebugArangeSet so that we can use the fallback call to DWARFUnit::BuildAddressRangeTable(). Since DWARFDebugInfo::GetCompileUnitAranges() needs to parse what it can from the .debug_aranges and build address ranges tables for any compile units that don't have any .debug_aranges sets, everything now works as expected.
- Fix an issue where a DWARFDebugArangeSet contains multiple terminator entries. The LLVM parser and llvm-dwarfdump properly warn about this because it happens with linux compilers and linkers and was the original cause of the bug I am fixing here. We now correctly warn about this issue if "log enable dwarf info" is enabled, but we continue to parse the DWARFDebugArangeSet correctly so we don't lose data that is contained in the .debug_aranges section.
- DWARFDebugAranges::extract() no longer returns a llvm::Error because we need to be able to parse all of the valid DWARFDebugArangeSet objects. It also will correctly skip a DWARFDebugArangeSet object that has errors in the middle of the stream by setting the start offsets of each DWARFDebugArangeSet to be calculated by the previous DWARFDebugArangeSet::extract() calculated offset that uses the header which contains the length of the DWARFDebugArangeSet. This means if do we run into real errors while parsing individual DWARFDebugArangeSet objects, we can continue to parse the rest of the validly encoded DWARFDebugArangeSet objects in the .debug_aranges section. This will allow LLDB to parse DWARF that contains a possibly newer .debug_aranges set format than LLDB currently supports because we will error out for the parsing of the DWARFDebugArangeSet, but be able to skip to the next DWARFDebugArangeSet object using the "DWARFDebugArangeSet.m_header.length" field to calculate the next starting offset.
Tests were added to cover all new functionality.
Differential Revision: https://reviews.llvm.org/D99401
In future patches I will be setting the IsText parameter frequently so I will refactor the args to be in the following order. I have removed the FileSize parameter because it is never used.
```
static ErrorOr<std::unique_ptr<MemoryBuffer>>
getFile(const Twine &Filename, bool IsText = false,
bool RequiresNullTerminator = true, bool IsVolatile = false);
static ErrorOr<std::unique_ptr<MemoryBuffer>>
getFileOrSTDIN(const Twine &Filename, bool IsText = false,
bool RequiresNullTerminator = true);
static ErrorOr<std::unique_ptr<MB>>
getFileAux(const Twine &Filename, uint64_t MapSize, uint64_t Offset,
bool IsText, bool RequiresNullTerminator, bool IsVolatile);
static ErrorOr<std::unique_ptr<WritableMemoryBuffer>>
getFile(const Twine &Filename, bool IsVolatile = false);
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D99182
DWARFExpression implements the DWARF2 expression model that left
ambiguity on whether the result of an expression was a value or an
address. This patch implements the DWARF location description model
introduces in DWARF 4 and sets the result Value's kind accordingly, if
the expression comes from a DWARF v4+ compile unit. The nomenclature
is taken from DWARF 5, chapter 2.6 "Location Descriptions".
Differential Revision: https://reviews.llvm.org/D98996
This patch adds a ScriptedProcess interface to the ScriptInterpreter and
more specifically, to the ScriptInterpreterPython.
This interface will be used in the C++ `ScriptProcess` Process Plugin to
call the script methods.
At the moment, not all methods are implemented, they will upstreamed in
upcoming patches.
This patch also adds helper methods to the ScriptInterpreter to
convert `SBAPI` Types (SBData & SBError) to `lldb_private` types
(DataExtractor & Status).
rdar://65508855
Differential Revision: https://reviews.llvm.org/D95711
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Make the API, Shell and Unit tests independent lit test suites. This
allows us to specify different dependencies and skip rebuilding all the
unit test (which is particularly expensive) when running check-lldb-api
or check-lldb-shell.
This does not change the autogenerated targets such as
check-lldb-shell-driver or the top level check-lldb target, which all
continue to work as before.
Differential revision: https://reviews.llvm.org/D98842
A few cleanups suggested in another patch review's comments:
1. Use llvm:unique_function for storing & invoking callbacks from
Editline to IOHandler
2. Change return type of one of the callback setters from bool to void,
since it's return value was never used
3. Moved the callback setters inline & made them nonstatic, since that's
more consistent with other setter definitions
4. Removed the baton parameter since we no longer need it anymore
Differential revision: https://reviews.llvm.org/D50299
This is a follow-up to 188b0747c1. This
is a very narrow fix to a more general problem. LLDB should be better
at distinguishing between implict and memory location descriptions.
rdar://74902042
This patch adds a ScriptedProcess interface to the ScriptInterpreter and
more specifically, to the ScriptInterpreterPython.
This interface will be used in the C++ `ScriptProcess` Process Plugin to
call the script methods.
At the moment, not all methods are implemented, they will upstreamed in
upcoming patches.
This patch also adds helper methods to the ScriptInterpreter to
convert `SBAPI` Types (SBData & SBError) to `lldb_private` types
(DataExtractor & Status).
rdar://65508855
Differential Revision: https://reviews.llvm.org/D95711
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Some implementations of the DeepCopy function called the copy constructor that copied m_parent member instead of setting a new parent. Others just leaved the base class's members (m_parent, m_callback, m_was_set) empty.
One more problem is that not all classes override this function, e.g. OptionValueArgs::DeepCopy produces OptionValueArray instance, and Target[Process/Thread]ValueProperty::DeepCopy produces OptionValueProperty. This makes downcasting via static_cast invalid.
The patch implements idiom "virtual constructor" to fix these issues.
Add a test that checks DeepCopy for correct copying/setting all data members of the base class.
Differential Revision: https://reviews.llvm.org/D96952
Swift async functions receive function arguments inside a
heap-allocated data structure, similar to how ObjC block captures or
C++ coroutine arguments are implement. In DWARF they are described
relative to an entry value that produces a pointer into that heap
object. At typical location looks like
DW_OP_entry_value [ DW_OP_reg14 ] DW_OP_deref DW_OP_plus_uconst 32 DW_OP_deref
This allows the unwinder (which has special ABI knowledge to restore
the contents of r14) to push the base address onto the stack thus
allowing the deref/offset operations to continue. The result of the
entry value is a scalar, because DW_OP_reg14 is a register location —
as it should be since we want to restore the pointer value contained
in r14 at the beginning of the function and not the historical memory
contents it was pointing to. The entry value should restore the
address, which is still valid, not the contents at function entry.
To make this work, we need to allow LLDB to dereference Scalar stack
results like load addresses, which is what this patch
does. Unfortunately it is difficult to test this in isolation, since
the DWARFExpression unit test doesn't have a process.
Differential Revision: https://reviews.llvm.org/D96549
The comment for ValueType claims that all values <1 are errors, but
not all switch statements take this into account. This patch
introduces an explicit Error case and deletes all default: cases, so
we get warned about incomplete switch coverage.
https://reviews.llvm.org/D96537
Introduce a minimal support for the 32-bit powerpc platform. This
includes support for GPR and FPR registers. I also needed to add
software breakpoint opcode for PPC32/PPC64 (big endian), and to fix
offsets in RegisterInfos_powerpc.h (used only by FreeBSD register
context to be globally unique rather than relative to each struct).
Differential Revision: https://reviews.llvm.org/D95947
Introduce mips64 support to match the legacy FreeBSD plugin. Similarly
to the legacy plugin, the code does not support FPU registers at the
moment. The support for them will be submitted separately as it
requires changes to the register context shared by both plugins.
This also includes software single-stepping support that is moved from
the Linux plugin into a common Utility class. The FreeBSD code also
starts explicitly ignoring EINVAL from PT_CLEARSTEP since this is easier
to implement than checking whether hardware single-stepping were used.
Differential Revision: https://reviews.llvm.org/D95802
Introduce a NativeRegisterContextFreeBSD for 32-bit ARM platform.
This includes support for GPR + VFP registers as exposed by FreeBSD's
ptrace(2) API. Hardware breakpoints or watchpoints are not supported
due to missing kernel support. The code is roughly based on the arm64
context.
It also includes an override for GetSoftwareBreakpointTrapOpcode() based
on the matching code in the PlatformFreeBSD plugin.
Differential Revision: https://reviews.llvm.org/D95696
Introduce arm64 support in the FreeBSDRemote plugin. The code
is roughly based on Linux and reuses the same POSIX RegisterInfos
(but the buffers need to be a few bytes larger due to stricter struct
member alignment in FreeBSD structures -- luckily, they do not affect
the actual member offsets). It supports reading and writing
general-purpose and FPU registers. SVE and hardware watchpoint support
is missing due to the limitations of FreeBSD ptrace(2) API.
Differential Revision: https://reviews.llvm.org/D95297
Adds support for running a Lua function when a breakpoint is hit.
Example:
breakpoint command add -s lua -F abc
The above runs the Lua function 'abc' passing 2 arguments. 'frame', 'bp_loc' and 'extra_args'.
A third parameter 'extra_args' is only present when there is structured data
declared in the command line.
Example:
breakpoint command add -s lua -F abc -k foo -v bar
Differential Revision: https://reviews.llvm.org/D93649
Currently when LLDB has enough data in the debug information to import the `std` module,
it will just try to import it. However when debugging libraries where the sources aren't
available anymore, importing the module will generate a confusing diagnostic that
the module couldn't be built.
For the fallback mode (where we retry failed expressions with the loaded module), this
will cause the second expression to fail with a module built error instead of the
actual parsing issue in the user expression.
This patch adds checks that ensures that we at least have any source files in the found
include paths before we try to import the module. This prevents the module from being
loaded in the situation described above which means we don't emit the bogus 'can't
import module' diagnostic and also don't waste any time retrying the expression in the
fallback mode.
For the unit tests I did some refactoring as they now require a VFS with the files in it
and not just the paths. The Python test just builds a binary with a fake C++ module,
then deletes the module before debugging.
Fixes rdar://73264458
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D95096
When a program maps one of its own modules for reading, and then
crashes, breakpad can emit two entries for that module in the
ModuleList. We have logic to identify this case by checking permissions
on mapped memory regions and report just the module with an executable
region. As currently written, though, the check is asymmetric -- the
entry with the executable region must be the second one encountered for
the preference to kick in.
This change makes the logic symmetric, so that the first-encountered
module will similarly be preferred if it has an executable region but
the second-encountered module does not. This happens for example when
the module in question is the executable itself, which breakpad likes to
report first -- we need to ignore the other entry for that module when
we see it later, even though it may be mapped at a lower virtual
address.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D94629
This test seems to be broken there (which is not totally surprising as
this functionality was never used on windows). Disable the test while I
investigate.
- s/createUniqueFile/createUniquePath -- we don't want to create the file,
just the file name
- s/data()/str().c_str()/ -- paths given to system apis must be
null-terminated
To get LLDB one step closer to fulfil the software redundancy requirements of
modern aircrafts, we apparently decided to have two separately maintained
implementations of `CreateTypedef` in TypeSystemClang. Let's pass on the idea of
an LLDB-powered jetliner and deleted one implementation.
On a more serious note: This function got duplicated a long time ago when the
idea of CompilerType with a backing TypeSystemClang subclass happened
(56939cb310). One implementation was supposed to
be called from CompilerType::CreateTypedef and the other has just always been
around to create typedefs. By accident one of the implementations is only used
by the PDB parser while the CompilerType::CreateTypedef backend is used by the
rest of LLDB.
We also had some patches over the year that only fixed one of the two functions
(D18099 for example only fixed up the CompilerType::CreateTypedef
implementation). D51162 and D86140 both fixed the same missing `addDecl` call
for one of the two implementations.
This patch:
* deletes the `CreateTypedefType` function as its only used by the PDB parser
and the `CreateTypedef` implementation is anyway needed as it's the backend
implementation of CompilerType.
* replaces the calls in the PDB parser by just calling the CompilerType wrapper.
* moves the documentation to the remaining function.
* moves the check for empty typedef names that was only in the deleted
implementation to the other (I don't think this fixes anything as I believe
all callers are already doing the same check).
I'll fix up the usual stuff (not using StringRef, not doing early exit) in a NFC
follow-up.
This patch is not NFC as the PDB parser now calls the function that has the fix
from D18099.
Reviewed By: labath, JDevlieghere
Differential Revision: https://reviews.llvm.org/D93382
TargetList::CreateTarget automatically adds created target to the list, however,
CommandObjectTargetCreate does some additional preparation after creating a target
and which can fail. The command should remove created target if it failed. Since
the function has many ways to return, scope guard does this work safely.
Changes to the TargetList make target adding and selection more transparent.
Other changes remove unnecessary SetSelectedTarget after CreateTarget.
Differential Revision: https://reviews.llvm.org/D93052
Right now we have one large AST for all types in LLDB. All ODR violations in
types we reconstruct are resolved by just letting the ASTImporter handle the
conflicts (either by merging types or somehow trying to introduce a duplicated
declaration in the AST). This works ok for the normal types we build from debug
information as most of them are just simple CXXRecordDecls or empty template
declarations.
However, with a loaded `std` C++ module we have alternative versions of pretty
much all declarations in the `std` namespace that are much more fleshed out than
the debug information declarations. They have all the information that is lost
when converting to DWARF, such as default arguments, template default arguments,
the actual uninstantiated template declarations and so on.
When we merge these C++ module types into the big scratch AST (that might
already contain debug information types) we give the ASTImporter the tricky task
of somehow creating a consistent AST out of all these declarations. Usually this
ends in a messy AST that contains a mostly broken mix of both module and debug
info declarations. The ASTImporter in LLDB is also importing types with the
MinimalImport setting, which usually means the only information we have when
merging two types is often just the name of the declaration and the information
that it contains some child declarations. This makes it pretty much impossible
to even implement a better merging logic (as the names of C++ module
declarations and debug info declarations are identical).
This patch works around this whole merging problem by separating C++ module
types from debug information types. This is done by splitting up the single
scratch AST into two: One default AST for debug information and a dedicated AST
for C++ module types.
The C++ module AST is implemented as a 'specialised AST' that lives within the
default ScratchTypeSystemClang. When we select the scratch AST we can explicitly
request that we want such a isolated sub-AST of the scratch AST. I kept the
infrastructure more general as we probably can use the same mechanism for other
features that introduce conflicting types (such as programs that are compiled
with a custom -wchar-size= option).
There are just two places where we explicitly have request the C++ module AST:
When we export persistent declarations (`$mytype`) and when we create our
persistent result variable (`$0`, `$1`, ...). There are a few formatters that
were previously assuming that there is only one scratch AST which I cleaned up
in a preparation revision here (D92757).
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D92759
Prevent lldb from crashing when multiple threads are concurrently
accessing the SB API with reproducer capture enabled.
The API instrumentation records both the input arguments and the return
value, but it cannot block for the duration of the API call. Therefore
we introduce a sequence number that allows to to correlate the function
with its result and add locking to ensure those two parts are emitted
atomically.
Using the sequence number, we can detect situations where the return
value does not succeed the function call, in which case we print an
error saying that concurrency is not (currently) supported. In the
future we might attempt to be smarter and read ahead until we've found
the return value matching the current call.
Differential revision: https://reviews.llvm.org/D92820
Extract remote debugging logic from PlatformMacOSX and move it into
PlatformRemoteMacOSX so it can benefit from all the logic necessary for
remote debugging.
Until now, remote macOS debugging was treated almost identical to local
macOS debugging. By moving in into its own class, we can have it inherit
from PlatformRemoteDarwinDevice and all the functionality it provides,
such as looking at the correct DeviceSupport directory.
rdar://68167374
Differential revision: https://reviews.llvm.org/D92452
We currently reject all templates that have either zero args or that have a
parameter pack without a name. Both cases are actually allowed in C++, so
rejecting them leads to LLDB instead falling back to a dummy 'void' type. This
leads to all kind of errors later on (most notable, variables that have such
template types appear to be missing as we can't have 'void' variables and
inheriting from such a template type will cause Clang to hit some asserts when
finding that the base class is 'void').
This just removes the too strict tests and adds a few tests for this stuff (+
some combinations of these tests with preceding template parameters).
Things that I left for follow-up patches:
* All the possible interactions with template-template arguments which seem like a whole new source of possible bugs.
* Function templates which completely lack sanity checks.
* Variable templates are not implemented.
* Alias templates are not implemented too.
* The rather strange checks that just make sure that the separate list of
template arg names and values always have the same length. I believe those
ought to be asserts, but my current plan is to move both those things into a
single list that can't end up in this inconsistent state.
Reviewed By: JDevlieghere, shafik
Differential Revision: https://reviews.llvm.org/D92425
This patch carries forward our aim to remove offset field from qRegisterInfo
packets and XML register description. I have created a new function which
returns if offset fields are dynamic meaning client can calculate offset on
its own based on register number sequence and register size. For now this
function only returns true for NativeRegisterContextLinux_arm64 but we can
test this for other architectures and make it standard later.
As a consequence we do not send offset field from lldb-server (arm64 for now)
while other stubs dont have an offset field so it wont effect them for now.
On the client side we have replaced previous offset calculation algorithm
with a new scheme, where we sort all primary registers in increasing
order of remote regnum and then calculate offset incrementally.
This committ also includes a test to verify all of above functionality
on Arm64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91241
These callbacks are set using the following:
breakpoint command add -s lua -o "print('hello world!')"
The user supplied script is executed as:
function (frame, bp_loc, ...)
<body>
end
So the local variables 'frame', 'bp_loc' and vararg are all accessible.
Any global variables declared will persist in the Lua interpreter.
A user should never hold 'frame' and 'bp_loc' in a global variable as
these userdatas are context dependent.
Differential Revision: https://reviews.llvm.org/D91508
Previously if you did:
$ lldb-server platform --server <...> --min-gdbserver-port 12346
--max-gdbserver-port 12347
(meaning only use port 12346 for gdbservers)
Then tried to launch two gdbservers on the same connection,
the second one would return port 65535. Which is a real port
number but it actually means lldb-server didn't find one it was
allowed to use.
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1919;port:12346;#c0
<...>
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1927;port:65535;#c7
This situation should be an error even if port 65535 does happen
to be available on the current machine.
To fix this make PortMap it's own class within
GDBRemoteCommunicationServerPlatform.
This almost the same as the old typedef but for
GetNextAvailablePort() returning an llvm::Expected.
This means we have to handle not finding a port,
by returning an error packet.
Also add unit tests for this new PortMap class.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91634
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
The Shell/Register tests now rely on the new behavior, and therefore
are run on non-Darwin systems only. The Python (API) test relies
on the legacy behavior, and is run on Darwin only.
Differential Revision: https://reviews.llvm.org/D91504
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
Differential Revision: https://reviews.llvm.org/D91504
The FXSAVE/XSAVE data can have two different layouts on x86_64. When
called as FXSAVE/XSAVE..., the Instruction Pointer and Address Pointer
registers are reported using a 16-bit segment identifier and a 32-bit
offset. When called as FXSAVE64/XSAVE64..., they are reported using
a complete 64-bit offsets instead.
LLDB has historically followed GDB and unconditionally used to assume
the 32-bit layout, with the slight modification of possibly
using a 32-bit segment register (i.e. extending the register into
the reserved 16 upper bits). When the underlying operating system used
FXSAVE64/XSAVE64..., the pointer was split into two halves,
with the upper half repored as the segment registers. While
reconstructing the full address was possible on the user end (and e.g.
the FPU register tests did that), it certainly was not the most
convenient option.
Introduce a two additional 'fip' and 'fdp' registers that overlap
with 'fiseg'/'fioff' and 'foseg'/'foff' respectively, and report
the complete 64-bit address.
Differential Revision: https://reviews.llvm.org/D91497
Use offset-based method to access x86 debug registers. This also
involves adding a test for the correctness of these offsets, and making
GetDR() method of NativeRegisterContextWatchpoint_x86 public to avoid
duplicate code.
Differential Revision: https://reviews.llvm.org/D91268
Use offset-based method to access base x87 FPU registers, using offsets
relative to the position of 'struct FPR', as determined by the location
of first register in it (fctrl). Change m_fpr to use a fixed-size array
matching FXSAVE size (512 bytes). Add unit tests for verifying
RegisterInfo offsets and sizes against the FXSAVE layout.
Differential Revision: https://reviews.llvm.org/D91248
Read and write registers from m_gpr using offsets from RegisterInfo
rather than explicit switch-case. This eliminates a lot of redundant
code, and avoids mistakes such as type mismatches seen recently (wrt
segment registers). The same logic will be extended to other register
sets in the future.
Make m_gpr an uint8_t std::array to ease accesses. Ideally, we could
avoid including <machine/reg.h> entirely in the future and instead
get the correct GPR size from Utility/RegisterContextFreeBSD_* somehow.
While at it, modify register set logic to use an explicit enum with
llvm::Optional<>, making the code cleaner and at the same time enabling
compiler warnings for unhandled sets.
Since now we're fully relying on 'struct GPR' defined
in Utility/RegisterContextFreeBSD_* being entirely in sync with
the system structure, add unit tests to verify the field offsets
and sizes.
Differential Revision: https://reviews.llvm.org/D91216
Buildbot failed on Windows
http://lab.llvm.org:8011/#/builders/83/builds/693
Error: On Windows, std::future can't hold an Expected, as it doesn't have a default
constructor.
Solution: Use std::future<bool> instead of std::future<Expected<T>>
Depends on D89283.
The goal of this packet (jTraceGetSupportedType) is to be able to query the gdb-server for the tracing technology that can work for the current debuggeer, which can make the user experience simpler but allowing the user to simply type
thread trace start
to start tracing the current thread without even telling the debugger to use "intel-pt", for example. Similarly, `thread trace start [args...]` would accept args beloging to the working trace type.
Also, if the user typed
help thread trace start
We could directly show the help information of the trace type that is supported for the target, or mention instead that no tracing is supported, if that's the case.
I added some simple tests, besides, when I ran this on my machine with intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: {"description":"Intel Processor Trace","pluginName":"intel-pt"}
On a machine without intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: E00;
Reviewed By: clayborg, labath
Differential Revision: https://reviews.llvm.org/D90490
Dwarf says (Section 2.5.1.1. of DWARF v5) that these operations should
push "generic" (pointer-sized) values. This was not the case for
DW_OP_const operations (which were pushing values based on the size of
arguments), nor DW_OP_litN (which were always pushing 64-bit values).
The practical effect of this that were were unable to display the values
of variables if the size of the DW_OP_const opcode was smaller than the
value of the variable it was describing. This would happen because we
would store this (small) result into a buffer and then would not be able
to read sufficient data out of it (in Value::GetValueAsData). Gcc emits
debug info like this.
Other (more subtle) effects are also possible.
The same fix should be applied to DW_OP_const[us] (leb128 versions), but
I'm not doing that right now, because that would cause us to display
wrong (truncated) values of variables on 32-bit targets (pr48087).
Differential Revision: https://reviews.llvm.org/D90840
The class only supports a single DWARF unit (needed for my new test), and it
reimplements chunks of object and symbol file classes. We can just make it use
the real thing, save some LOC and get the full feature set.
Differential Revision: https://reviews.llvm.org/D90393
This patch completes https://reviews.llvm.org/D83560. Now that the
compiler can emit `DW_OP_implicit_value` into DWARF expressions, lldb
needed to learn reading these opcodes for variable inspection and
expression evaluation.
This implicit location descriptor specifies an immediate value with two
operands: the length (ULEB128) followed by a block representing the value
in the target memory representation.
rdar://67406091
Differential revision: https://reviews.llvm.org/D89842
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds support for the _M and _m gdb-remote packets, which
(de)allocate memory in the inferior. This works by "injecting" a
m(un)map syscall into the inferior. This consists of:
- finding an executable page of memory
- writing the syscall opcode to it
- setting up registers according to the os syscall convention
- single stepping over the syscall
The advantage of this approach over calling the mmap function is that
this works even in case the mmap function is buggy or unavailable. The
disadvantage is it is more platform-dependent, which is why this patch
only works on X86 (_32 and _64) right now. Adding support for other
linux architectures should be easy and consist of defining the
appropriate syscall constants. Adding support for other OSes depends on
the its ability to do a similar trick.
Differential Revision: https://reviews.llvm.org/D89124
This is essentially a replacement for the PacketUnimplementedError
previously present in the gdb-remote server code.
The reason I am introducing a generic error is because I wanted the
native process classes to be able to signal that they do not support
some functionality. They could not use PacketUnimplementedError as they
are independent of a specific transport protocol. Putting the error
class in the the native process code was also not ideal because the
gdb-remote code is also used for lldb-server's platform mode, which does
not (should not) know how to debug individual processes.
I'm putting it under Utility, as I think it can be generally useful for
notifying about unsupported/unimplemented functionality (and in
particular, for programatically testing whether something is
unsupported).
Differential Revision: https://reviews.llvm.org/D89121
This patch fixes a few issues seen when running `ninja check-lldb` in a Release build with VS2017:
- Some binaries couldn't be found (such as lldb-vscode.exe), because .exe wasn't appended to the file name.
- Many tests used to fail since our installed locale is in French - the OS error messages are not emitted in English.
- Our codepage being Windows-1252, python failed to decode some error messages with accentuations.
Differential Revision: https://reviews.llvm.org/D88975
When running in an ipv6-only environment where `AF_INET` sockets are not available, many lldb tests (mostly gdb remote tests) fail because things like `127.0.0.1` don't work there.
Use `localhost` instead of `127.0.0.1` whenever possible, or include a fallback of creating `AF_INET6` sockets when `AF_INET` fails.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87333
This reverts commit f775fe5964.
I fixed a return type error in the original patch that was causing a test failure.
Also added a REQUIRES: python to the shell test so we'll skip this for
people who build lldb w/o Python.
Also added another test for the error printing.
This patch makes the include_directories, file_names and opcodes fields
of the line table optional. This helps us simplify some tests.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D87878
Code was added that used llvm error checking to parse .debug_aranges, but the error check after parsing the DWARFDebugArangesSet was reversed and was causing no error to be returned with no valid address ranges being actually used. This meant we always would fall back onto creating out own address ranges by parsing the compile unit's ranges. This was causing problems for cases where the DW_TAG_compile_unit had a single address range by using a DW_AT_low_pc and DW_AT_high_pc attribute pair (not using a DW_AT_ranges attribute), but the .debug_aranges had correct split ranges. In this case we would end up using the single range for the compile unit that encompassed all of the ranges from the .debug_aranges section and would cause address resolving issues in LLDB where address lookups would fail for certain addresses.
Differential Revision: https://reviews.llvm.org/D87626
The Length, AbbrOffset and Values fields of the debug_info section are
optional. This patch helps remove them and simplify test cases.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D86857
Fixes error: no matching constructor for initialization of
'std::pair<std::__cxx11::basic_string<char>, std::__cxx11::basic_string<char> >'
with older toolchain (clang/libcxx) on Ubuntu 16.04. The issue is the
StringRef-to-std::string conversion.
This applies the same fix that D84748 did for macro definitions.
Appropriate include path is now automatically set for all libraries
which link against gtest targets, which avoids the need to set
include_directories in various parts of the project.
Differential Revision: https://reviews.llvm.org/D86616
Breakpad creates minidump files that can a module loaded multiple times. We found that when a process mmap's the object file for a library, this can confuse breakpad into creating multiple modules in the module list. This patch fixes the GetFilteredModules() to check the linux maps for permissions and use the one that has execute permissions. Typically when people mmap a file into memory they don't map it as executable. This helps people to correctly load minidump files for post mortem analysis.
Differential Revision: https://reviews.llvm.org/D86375
Since a842950b62 this test started using
the reproducer subsystem but we never initialized it in the test. The
Subsystem takes an argument, so we can't use the usual SubsystemRAII at the
moment to do this for us.
This just adds the initialize/terminate calls to get the test passing again.
Extract all the provider related logic from Reproducer.h and move it
into its own header ReproducerProvider.h. These classes are seeing most
of the development these days and this reorganization reduces
incremental compilation from ~520 to ~110 files when making changes to
the new header.
This patch adds support for emitting multiple abbrev tables. Currently,
compilation units will always reference the first abbrev table.
Reviewed By: jhenderson, labath
Differential Revision: https://reviews.llvm.org/D86194
Similarly to D85836, collapse all Scalar float types to a single enum
value, and use APFloat semantics to differentiate between. This
simplifies the code, and opens to door to supporting other floating
point semantics (which would be needed for fully supporting
architectures with more interesting float types such as PPC).
Differential Revision: https://reviews.llvm.org/D86220
This patch is a big sed to rename the following variables:
s/PYTHON_LIBRARIES/Python3_LIBRARIES/g
s/PYTHON_INCLUDE_DIRS/Python3_INCLUDE_DIRS/g
s/PYTHON_EXECUTABLE/Python3_EXECUTABLE/g
s/PYTHON_RPATH/Python3_RPATH/g
I've also renamed the CMake module to better express its purpose and for
consistency with FindLuaAndSwig.
Differential revision: https://reviews.llvm.org/D85976
The class contains an enum listing all host integer types as well as
some non-host types. This setup is a remnant of a time when this class
was actually implemented in terms of host integer types. Now that we are
using llvm::APInt, they are mostly useless and mean that each function
needs to enumerate all of these cases even though it treats most of them
identically.
I only leave e_sint and e_uint to denote the integer signedness, but I
want to remove that in a follow-up as well.
Removing these cases simplifies most of these functions, with the only
exception being PromoteToMaxType, which can no longer rely on a simple
enum comparison to determine what needs to be promoted.
This also makes the class ready to work with arbitrary integer sizes, so
it does not need to be modified when someone needs to add a larger
integer size.
Differential Revision: https://reviews.llvm.org/D85836
Apparently when the strings are created, the `'\n'` is converted to the
platform's natural new line indicator, which is CR+LF on Windows. But
upon reading back with `sscanf`, the CRs caused a matching failure.
This patch configures LLDB.framework to build as a flat unversioned
framework on non-macOS Darwin targets, which have never supported the
macOS framework layout.
This patch also renames the 'IOS' cmake variable to 'APPLE_EMBEDDED' to
reflect the fact that lldb is built for several different kinds of embedded
Darwin targets, not just iOS.
Differential Revision: https://reviews.llvm.org/D85770
These definitions are needed by any file which uses gtest. Previously we
were adding them in the add_unittest function, but over time we've
accumulated libraries (which don't go through add_unittest) building on
gtest and this has resulted in proliferation of the definitions.
Making this a part of the library interface enables them to be managed
centrally. This follows a patch for -Wno-suggest-override (D84554) which
took a similar approach.
Differential Revision: https://reviews.llvm.org/D84748
The implementation of these classes was copied & pasted from the
iPhone simulator plugin with only a handful of configuration
parameters substituted. This patch moves the redundant implementations
into the base class PlatformAppleSimulator.
Differential Revision: https://reviews.llvm.org/D85243
The code in ObjectFileMachO didn't disambiguate between ios and
ios-simulator object files for Mach-O objects using the legacy
ambiguous LC_VERSION_MIN load commands. This used to not matter before
taught ArchSpec that ios and ios-simulator are no longer compatible.
rdar://problem/66545307
Differential Revision: https://reviews.llvm.org/D85358
Jan Kratochvil