Summary:
Currently the DbgValueHistorymap only keeps track of clobbered registers
for the last debug value that it has encountered. This could lead to
preceding register-described debug values living on longer in the
location lists than they should. See PR40283 for an example. This
patch does not introduce tracking of multiple registers, but changes
the DbgValueHistoryMap structure to allow for that in a follow-up
patch. This patch is not NFC, as it at least fixes two bugs in
DwarfDebug (both are covered in the new clobbered-fragments.mir test):
* If a debug value was clobbered (its End pointer set), the value would
still be added to OpenRanges, meaning that the succeeding location list
entries could potentially contain stale values.
* If a debug value was clobbered, and there were non-overlapping
fragments that were still live after the clobbering, DwarfDebug would
not create a location list entry starting directly after the
clobbering instruction. This meant that the location list could have
a gap until the next debug value for the variable was encountered.
Before this patch, the history map was represented by <Begin, End>
pairs, where a new pair was created for each new debug value. When
dealing with partially overlapping register-described debug values, such
as in the following example:
DBG_VALUE $reg2, $noreg, !1, !DIExpression(DW_OP_LLVM_fragment, 32, 32)
[...]
DBG_VALUE $reg3, $noreg, !1, !DIExpression(DW_OP_LLVM_fragment, 64, 32)
[...]
$reg2 = insn1
[...]
$reg3 = insn2
the history map would then contain the entries `[<DV1, insn1>, [<DV2, insn2>]`.
This would leave it up to the users of the map to be aware of
the relative order of the instructions, which e.g. could make
DwarfDebug::buildLocationList() needlessly complex. Instead, this patch
makes the history map structure monotonically increasing by dropping the
End pointer, and replacing that with explicit clobbering entries in the
vector. Each debug value has an "end index", which if set, points to the
entry in the vector that ends the debug value. The ending entry can
either be an overlapping debug value, or an instruction which clobbers
the register that the debug value is described by. The ending entry's
instruction can thus either be excluded or included in the debug value's
range. If the end index is not set, the debug value that the entry
introduces is valid until the end of the function.
Changes to test cases:
* DebugInfo/X86/pieces-3.ll: The range of the first DBG_VALUE, which
describes that the fragment (0, 64) is located in RDI, was
incorrectly ended by the clobbering of RAX, which the second
(non-overlapping) DBG_VALUE was described by. With this patch we
get a second entry that only describes RDI after that clobbering.
* DebugInfo/ARM/partial-subreg.ll: This test seems to indiciate a bug
in LiveDebugValues that is caused by it not being aware of fragments.
I have added some comments in the test case about that. Also, before
this patch DwarfDebug would incorrectly include a register-described
debug value from a preceding block in a location list entry.
Reviewers: aprantl, probinson, dblaikie, rnk, bjope
Reviewed By: aprantl
Subscribers: javed.absar, kristof.beyls, jdoerfert, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D59941
llvm-svn: 358072
As discussed on PR41359, we're probably going to keep both of these but we need to make it more explicit how they complement each other.
llvm-svn: 358071
Summary:
In an upcoming commit the history map will be changed so that it
contains explicit entries for instructions that clobber preceding debug
values, rather than Begin- End range pairs, so generalize the name to
"Entry".
Also, prefix the iterator variable names in buildLocationList() with
"E". In an upcoming commit the entry will have query functions such as
"isD(e)b(u)gValue", which could at a glance make one confuse it for
iterations over MachineInstrs, so make the iterator names a bit more
distinct to avoid that.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59939
llvm-svn: 358060
Summary:
Replace use of std::pair by creating a class for the debug value
instruction ranges instead. This is a preparatory refactoring for
improving handling of clobbered fragments.
In an upcoming commit the Begin pointer will become a PointerIntPair, so
it will be cleaner to have a getter for that.
Reviewers: aprantl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59938
llvm-svn: 358059
Summary: Deprecate the existing accessors for the "current debug location" of an IRBuilder. The setter could not handle being reset to NULL, and the getter would create bogus metadata if the NULL location was returned. Provide direct metadata-based accessors instead.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60484
llvm-svn: 358039
Summary: Provide direct accessors to supplement LLVMSetInstDebugLocation. In addition, properly accept and return the NULL location. The old accessors provided no way to do this, so the current debug location cannot currently be cleared.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60481
llvm-svn: 358038
Summary: This brings us to full feature parity with the old API, so I've deprecated it and updated the tests. I'll do a follow-up patch to do some more cleanup and documentation work in this header.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60407
llvm-svn: 358037
required to be passed as different register types. E.g. <2 x i16> may need to
be passed as a larger <2 x i32> type, so formal arg lowering needs to be able
truncate it back. Likewise, when dealing with returns of these types, they need
to be widened in the appropriate way back.
Differential Revision: https://reviews.llvm.org/D60425
llvm-svn: 358032
Removes the code from opt and the pass manager builder.
The code was unused - even by the C library code that was supposed to set
it and had been removed previously.
llvm-svn: 358024
Avoid a warning while building modular LLVM due to a new
textual header missing in the modulemap:
TargetLibraryInfo.cpp:1485:6: warning: missing submodule
'LLVM_Analysis.VecFuncs' [-Wincomplete-umbrella]
Added VecFuncs.def as a textual header in LLVM_Analysis.
llvm-svn: 358021
In a sorted list of non-overlapping [LowPC,HighPC) ranges, locating an address with
upper_bound on HighPC is simpler than lower_bound on LowPC.
llvm-svn: 358012
This patch factors out mappings of scalar maths functions to their vector
counterparts from TargetLibraryInfo.cpp to a separate VecFuncs.def file. Such
mappings are currently available for Accelerate framework, and SVML library.
This is in support of the follow-up: https://reviews.llvm.org/D59881
Patch by pjeeva01
Differential revision: https://reviews.llvm.org/D60211
llvm-svn: 358001
The new value is taken from <mach/machine.h> in the MacOSX10.14 SDK from
Xcode 10.1. Update llvm-objdump and llvm-readobj accordingly.
Differential Revision: https://reviews.llvm.org/D58636
llvm-svn: 357945
For functions whose callers don't check that enough input is present,
add checks at the start of the function that enough input is there and
set Error otherwise.
For functions that return AST objects, return nullptr instead of
incomplete AST objects with nullptr fields if an error occurred during
the function.
Introduce a new function demangleDeclarator() for the sequence
demangleFullyQualifiedSymbolName(); demangleEncodedSymbol() and
use it in the two places that had this sequence. Let this new function
check that ConversionOperatorIdentifiers have a valid TargetType.
Some of the bad inputs found by oss-fuzz, others by inspection.
Differential Revision: https://reviews.llvm.org/D60354
llvm-svn: 357936
COMMON blocks are a feature of Fortran that has no direct analog in C languages, but they are similar to data sections in assembly language programming. A COMMON block is a named area of memory that holds a collection of variables. Fortran subprograms may map the COMMON block memory area to their own, possibly distinct, non-empty list of variables. A Fortran COMMON block might look like the following example.
COMMON /ALPHA/ I, J
For this construct, the compiler generates a new scope-like DI construct (!DICommonBlock) into which variables (see I, J above) can be placed. As the common block implies a range of storage with global lifetime, the !DICommonBlock refers to a !DIGlobalVariable. The Fortran variable that comprise the COMMON block are also linked via metadata to offsets within the global variable that stands for the entire common block.
@alpha_ = common global %alphabytes_ zeroinitializer, align 64, !dbg !27, !dbg !30, !dbg !33!14 = distinct !DISubprogram(…)
!20 = distinct !DICommonBlock(scope: !14, declaration: !25, name: "alpha")
!25 = distinct !DIGlobalVariable(scope: !20, name: "common alpha", type: !24)
!27 = !DIGlobalVariableExpression(var: !25, expr: !DIExpression())
!29 = distinct !DIGlobalVariable(scope: !20, name: "i", file: !3, type: !28)
!30 = !DIGlobalVariableExpression(var: !29, expr: !DIExpression())
!31 = distinct !DIGlobalVariable(scope: !20, name: "j", file: !3, type: !28)
!32 = !DIExpression(DW_OP_plus_uconst, 4)
!33 = !DIGlobalVariableExpression(var: !31, expr: !32)
The DWARF generated for this is as follows.
DW_TAG_common_block:
DW_AT_name: alpha
DW_AT_location: @alpha_+0
DW_TAG_variable:
DW_AT_name: common alpha
DW_AT_type: array of 8 bytes
DW_AT_location: @alpha_+0
DW_TAG_variable:
DW_AT_name: i
DW_AT_type: integer*4
DW_AT_location: @Alpha+0
DW_TAG_variable:
DW_AT_name: j
DW_AT_type: integer*4
DW_AT_location: @Alpha+4
Patch by Eric Schweitz!
Differential Revision: https://reviews.llvm.org/D54327
llvm-svn: 357934
Summary:
ThinLTOCodeGenerator currently does not preserve llvm.used symbols and
it can internalize them. In order to pass the necessary information to the
legacy ThinLTOCodeGenerator, the input to the code generator is
rewritten to be based on lto::InputFile.
This fixes: PR41236
rdar://problem/49293439
Reviewers: tejohnson, pcc, dexonsmith
Reviewed By: tejohnson
Subscribers: mehdi_amini, inglorion, eraman, hiraditya, jkorous, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60226
llvm-svn: 357931
Summary:
The ModuleList stream consists of an integer giving the number of
entries in the list, followed by the list itself. Each entry in the list
describes a module (dynamically loaded objects which were loaded in the
process when it crashed (or when the minidump was generated).
The code for reading the list is relatively straight-forward, with a
single gotcha. Some minidump writers are emitting padding after the
"count" field in order to align the subsequent list on 8 byte boundary
(this depends on how their ModuleList type was defined and the native
alignment of various types on their platform). Fortunately, the minidump
format contains enough redundancy (in the form of the stream length
field in the stream directory), which allows us to detect this situation
and correct it.
This patch just adds the ability to parse the stream. Code for
conversion to/from yaml will come in a follow-up patch.
Reviewers: zturner, amccarth, jhenderson, clayborg
Subscribers: jdoerfert, markmentovai, lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60121
llvm-svn: 357897
This extends D59959 to unionWith(), allowing to specify that a
non-wrapping unsigned/signed range is preferred. This is somewhat
less useful than the intersect case, because union operations are
rarer. An example use would the the phi union computed in SCEV.
The implementation is mostly a straightforward use of getPreferredRange(),
but I also had to adjust some <=/< checks to make sure that no ranges with
lower==upper get constructed before they're passed to getPreferredRange(),
as these have additional constraints.
Differential Revision: https://reviews.llvm.org/D60377
llvm-svn: 357876
The intersection of two ConstantRanges may consist of two disjoint
ranges. As we can only return one range as the result, we need to
return one of the two possible ranges that cover both. Currently the
result is picked based on set size. However, this is not always
optimal: If we're in an unsigned context, we'd prefer to get a large
unsigned range over a small signed range -- the latter effectively
becomes a full set in the unsigned domain.
This revision adds a PreferredRangeType, which can be either Smallest,
Unsigned or Signed. Smallest is the current behavior and Unsigned and
Signed are new variants that prefer not to wrap the unsigned/signed
domain. The new type isn't used anywhere yet (but SCEV will be a good
first user, see D60035).
I've also added some comments to illustrate the various cases in
intersectWith(), which should hopefully make it more obvious what is
going on.
Differential Revision: https://reviews.llvm.org/D59959
llvm-svn: 357873
Summary: Add an accessor for the type of a binary file.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60366
llvm-svn: 357872
Add isAllNegative() and isAllNonNegative() methods to ConstantRange,
which determine whether all values in the constant range are
negative/non-negative.
This is useful for replacing KnownBits isNegative() and isNonNegative()
calls when changing code to use constant ranges.
Differential Revision: https://reviews.llvm.org/D60264
llvm-svn: 357871
The current lower_bound approach has to check two iterators pos and pos-1.
Changing it to upper_bound allows us to check one iterator (similar to
DWARFUnitVector::getUnitFor*).
llvm-svn: 357834
Summary:
Provides a new type, `LLVMBinaryRef`, and a binding to `llvm::object::createBinary` for more general interoperation with binary files than `LLVMObjectFileRef`. It also provides the proper non-consuming API for input buffers and populates an out parameter for error handling if necessary - two things the previous API did not do.
In a follow-up, I'll define section and symbol iterators and begin to build upon the existing test infrastructure.
This patch is a first step towards deprecating that API and replacing it with something more robust.
Reviewers: deadalnix, whitequark
Reviewed By: whitequark
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60322
llvm-svn: 357822
Summary:
Now that we can create standalone basic blocks, it's useful to be able to append them. Add bindings to
- Insert a basic block after the current insertion block
- Append a basic block to the end of a function's list of basic blocks
Reviewers: whitequark, deadalnix, harlanhaskins
Reviewed By: whitequark, harlanhaskins
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59658
llvm-svn: 357812
Summary:
Reorder the condition code enum to match their encodings. Move it to MC layer so it can be used by the scheduler models.
This avoids needing an isel pattern for each condition code. And it removes
translation switches for converting between CMOV instructions and condition
codes.
Now the printer, encoder and disassembler take care of converting the immediate.
We use InstAliases to handle the assembly matching. But we print using the
asm string in the instruction definition. The instruction itself is marked
IsCodeGenOnly=1 to hide it from the assembly parser.
This does complicate the scheduler models a little since we can't assign the
A and BE instructions to a separate class now.
I plan to make similar changes for SETcc and Jcc.
Reviewers: RKSimon, spatel, lebedev.ri, andreadb, courbet
Reviewed By: RKSimon
Subscribers: gchatelet, hiraditya, kristina, lebedev.ri, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60041
llvm-svn: 357800
Summary:
Add new ``isa_and_nonnull<>`` operator that works just like
the ``isa<>`` operator, except that it allows for a null pointer as an
argument (which it then returns false).
Reviewers: lattner, aaron.ballman, greened
Reviewed By: lattner
Subscribers: hubert.reinterpretcast, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60291
llvm-svn: 357761
There are a variety of vector patterns that may be profitably reduced to a
scalar op when scalar ops are performed using a subset (typically, the
first lane) of the vector register file.
For x86, this is true for float/double ops and element 0 because
insert/extract is just a sub-register rename.
Other targets should likely enable the hook in a similar way.
Differential Revision: https://reviews.llvm.org/D60150
llvm-svn: 357760
The loop in findNextSetBit() runs one pass more than it should.
On 64-bit architectures this does not cause a problem, but 32-bit
architectures mask the shift count to 5 bits which limits the number of
shifts inside a range of 0 to 31. Shifting by 32 has the same effect as
shifting by 0, so if the first bit in the set is 1, the function will return
with Index different from EndIndexVal. Because of that, range-based for
loops iterating thorough architectures will continue until hitting a 0 in
the set, resulting in n additional iterations, where n is equal to the
number of consecutive 1 bits at the start the set.
Ultimately TBDv1.WriteFile and TBDv2.WriteFile will output additional
architectures causing a failure in the unit tests.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D60198
llvm-svn: 357759
Recent change rL357393 uses MachineInstrBuilder::addDisp to add a based on a
BlockAddress but this case was not implemented.
This patch adds the missing case and a test for RISC-V that exercises the new
case.
Differential Revision: https://reviews.llvm.org/D60136
llvm-svn: 357752
Summary:
Strings in minidump files are stored as a 32-bit length field, giving
the length of the string in *bytes*, which is followed by the
appropriate number of UTF16 code units. The string is also supposed to
be null-terminated, and the null-terminator is not a part of the length
field. This patch:
- adds support for reading these strings out of the minidump file (this
implementation does not depend on proper null-termination)
- adds support for writing them to a minidump file
- using the previous two pieces implements proper (de)serialization of
the CSDVersion field of the SystemInfo stream. Previously, this was
only read/written as hex, and no attempt was made to access the
referenced string -- now this string is read and written correctly.
The changes are tested via yaml2obj|obj2yaml round-trip as well as a
unit test which checks the corner cases of the string deserialization
logic.
Reviewers: jhenderson, zturner, clayborg
Subscribers: llvm-commits, aprantl, markmentovai, amccarth, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59775
llvm-svn: 357749
Summary: This changes the Architecture enum to use a prefix (AK_) to prevent the
preprocessor from replacing i386 with 1 when building llvm/clang for i386.
Reviewers: steven_wu, lhames, mstorsjo
Reviewed By: mstorsjo
Subscribers: hiraditya, jkorous, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60241
llvm-svn: 357733
Requires making the llvm::MemoryBuffer* stored by SourceManager const,
which in turn requires making the accessors for that return const
llvm::MemoryBuffer*s and updating all call sites.
The original motivation for this was to use it and fix the TODO in
CodeGenAction.cpp's ConvertBackendLocation() by using the UnownedTag
version of createFileID, and since llvm::SourceMgr* hands out a const
llvm::MemoryBuffer* this is required. I'm not sure if fixing the TODO
this way actually works, but this seems like a good change on its own
anyways.
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D60247
llvm-svn: 357724
MSVC 2019 casts the pointer to a pointer-sized integer, which is a
reinterpret_cast, which is invalid in a constexpr context, so I have to
remove the LLVM_REQUIRES_CONSTANT_INITIALIZATION annotation for now.
llvm-svn: 357716
Fixes PR41367.
This effectively relands r357655 with a workaround for MSVC 2017.
I tried various approaches with unions, but I ended up going with this
ifdef approach because it lets us write the proper C++11 code that we
want to write, with a separate workaround that we can delete when we
drop MSVC 2017 support.
This also adds LLVM_REQUIRE_CONSTANT_INITIALIZATION, which wraps
[[clang::require_constant_initialization]]. This actually detected a
minor issue when using clang-cl where clang wasn't able to use the
constexpr constructor in MSVC's STL, so I switched back to using the
default ctor of std::atomic<void*>.
llvm-svn: 357714
Fix minor innaccuracy in previous comment on ManagedStaticBase
........
Make ManagedStatic constexpr constructible
Apparently it needs member initializers so that it can be constructed in
a constexpr context. I explained my investigation of this in PR41367.
........
Causes vs2017 debug llvm-tblgen to fail with "Unknown command line argument" errors - similar to the vs2019 error discussed on PR41367 without the patch....
llvm-svn: 357685
In general, llvm-symbolizer follows the output style of GNU's addr2line.
However, there are still some differences; in particular, for a requested
address, llvm-symbolizer prints line and column, while addr2line prints
only the line number.
This patch adds a new switch to select the preferred style.
Differential Revision: https://reviews.llvm.org/D60190
llvm-svn: 357675
Summary:
Certain classes in the subject file are expected to provide different
views of a two-byte field as a collection of various bit-fields. On AIX,
the canonical layout of bit-fields would cause these classes to span
four bytes. Applying the `pack` pragma for compilers that employ the AIX
canonical layout allows these classes to fit within the expected two
bytes. In the future, the pragma would also likely need to be applied
when building with Clang on AIX.
Reviewers: xingxue, sfertile, jasonliu
Reviewed By: xingxue
Subscribers: jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60164
llvm-svn: 357661
Summary:
Now CVType and CVSymbol are effectively type-safe wrappers around
ArrayRef<uint8_t>. Make the kind() accessor load it from the
RecordPrefix, which is the same for types and symbols.
Reviewers: zturner, aganea
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60018
llvm-svn: 357658
Apparently it needs member initializers so that it can be constructed in
a constexpr context. I explained my investigation of this in PR41367.
llvm-svn: 357655
Create method `optForNone()` testing for the function level equivalent of
`-O0` and refactor appropriately.
Differential revision: https://reviews.llvm.org/D59852
llvm-svn: 357638
Summary: Currently ProfileSummaryBuilder doesn't count into callsite samples when computing total samples. Considering that ProfileSummaryInfo is used to checked the hotness of not only body samples but also callsite samples (from SampleProfileLoader), I think the callsite sample counts should be considered when computing total samples.
Reviewers: eraman, danielcdh, wmi
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59835
llvm-svn: 357627
Currently, YAML has the following syntax for describing the symbols:
Symbols:
Local:
LocalSymbol1:
...
LocalSymbol2:
...
...
Global:
GlobalSymbol1:
...
Weak:
...
GNUUnique:
I.e. symbols are grouped by their bindings. That is not very convenient,
because:
It does not allow to set a custom binding, what can be useful for producing
broken/special outputs for test cases. Adding a new binding would require to
change a syntax (what we observed when added GNUUnique recently).
It does not allow to change the order of the symbols in .symtab/.dynsym,
i.e. currently all Local symbols are placed first, then Global, Weak and GNUUnique
are following, but we are not able to change the order.
It is not consistent. Binding is just one of the properties of the symbol,
we do not group them by other properties.
It makes the code more complex that it can be. This patch shows it can be simplified
with the change performed.
The patch changes the syntax to just:
Symbols:
Symbol1:
...
Symbol2:
...
...
With that, we are able to work with the binding field just like with any other symbol property.
Differential revision: https://reviews.llvm.org/D60122
llvm-svn: 357595
The Emscripten OS provides a definition of __EMSCRIPTEN__, and also that it
supports iprintf optimizations.
Also define small_printf optimizations, which is a printf with float support
but not long double (which in wasm can be useful since long doubles are 128
bit and force linking of float128 emulation code). This part is based on
sunfish's https://reviews.llvm.org/D57620 (which can't land yet since
the WASI integration isn't ready yet).
Differential Revision: https://reviews.llvm.org/D60167
llvm-svn: 357552
Summary:
Reorder the fields in both to use padding more efficiently, and add more
comments on the purpose of the fields.
Replace `std::vector<SectionChunk*> AssociativeChildren` with a
singly-linked list. This avoids the separate vector allocation to list
associative children, and shrinks the 3 pointers used for the typically
empty vector down to 1.
In the end, this reduces the sum of heap allocations used to link
browser_tests.exe with NO PDB by 13.10%, going from 2,248,728 KB to
1,954,071 KB of heap. These numbers exclude memory mapped files, which
are of course a significant factor in LLD's memory usage.
Reviewers: ruiu, mstorsjo, aganea
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59797
llvm-svn: 357535
Summary:
This patch adds the code needed to parse a minidump file into the
MinidumpYAML model, and the necessary glue code so that obj2yaml can
recognise the minidump files and process them.
Reviewers: jhenderson, zturner, clayborg
Subscribers: mgorny, lldb-commits, amccarth, markmentovai, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59634
llvm-svn: 357469
There are various places in LLVM where the definition of StackID is not
properly honoured, for example in PEI where objects with a StackID > 0 are
allocated on the default stack (StackID0). This patch enforces that PEI
only considers allocating objects to StackID 0.
Reviewers: arsenm, thegameg, MatzeB
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D60062
llvm-svn: 357460
This patch adds an implementation of a PC-relative addressing sequence to be
used when -mcmodel=medium is specified. With absolute addressing, a 'medium'
codemodel may cause addresses to be out of range. This is because while
'medium' implies a 2 GiB addressing range, this 2 GiB can be at any offset as
opposed to 'small', which implies the first 2 GiB only.
Note that LLVM/Clang currently specifies code models differently to GCC, where
small and medium imply the same functionality as GCC's medlow and medany
respectively.
Differential Revision: https://reviews.llvm.org/D54143
Patch by Lewis Revill.
llvm-svn: 357393
In PR41304:
https://bugs.llvm.org/show_bug.cgi?id=41304
...we have a case where we want to fold a binop of select-shuffle (blended) values.
Rather than try to match commuted variants of the pattern, we can canonicalize the
shuffles and check for mask equality with commuted operands.
We don't produce arbitrary shuffle masks in instcombine, but select-shuffles are a
special case that the backend is required to handle because we already canonicalize
vector select to this shuffle form.
So there should be no codegen difference from this change. It's possible that this
improves CSE in IR though.
Differential Revision: https://reviews.llvm.org/D60016
llvm-svn: 357366
Straightforward port of StatepointIRVerifier pass to new Pass Manager framework.
Fix By: skatkov
Reviewed By: fedor.sergeev
Differential Revision: https://reviews.llvm.org/D59825
This is a re-land of r357147/r357148 with LLVM_ENABLE_MODULES build fixed.
Adding IR/SafepointIRVerifier.h into its own module.
llvm-svn: 357361
This change adds hierarchical "time trace" profiling blocks that can be visualized in Chrome, in a "flame chart" style. Each profiling block can have a "detail" string that for example indicates the file being processed, template name being instantiated, function being optimized etc.
This is taken from GitHub PR: https://github.com/aras-p/llvm-project-20170507/pull/2
Patch by Aras Pranckevičius.
Differential Revision: https://reviews.llvm.org/D58675
llvm-svn: 357340
Summary:
This lets us avoid e.g. checking if A >=s B in getSMaxExpr(A, B) if we've
already established that (A smax B) is the best we can do.
Fixes PR41225.
Reviewers: asbirlea
Subscribers: mcrosier, jlebar, bixia, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60010
llvm-svn: 357320
Summary:
Various SelectionDAG non-combine operations (e.g. the getNode smart
constructor and legalization) may leave dangling nodes by applying
optimizations without fully pruning unused result values. This results
in nodes that are never added to the worklist and therefore can not be
pruned.
Add a node inserter for the combiner to make sure such nodes have the
chance of being pruned. This allows a number of additional peephole
optimizations.
Reviewers: efriedma, RKSimon, craig.topper, jyknight
Reviewed By: jyknight
Subscribers: msearles, jyknight, sdardis, nemanjai, javed.absar, hiraditya, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58068
llvm-svn: 357279
Summary: Support reading notes that don't have a standard note name.
Reviewers: MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59969
llvm-svn: 357271
Updated to use DenseMap::insert instead of [] operator for insertion, to
avoid a crash caused by epoch checks.
This reverts commit 2b85de4383.
llvm-svn: 357257
This patch adds an experimental stage named MicroOpQueueStage.
MicroOpQueueStage can be used to simulate a hardware micro-op queue (basically,
a decoupling queue between 'decode' and 'dispatch'). Users can specify a queue
size, as well as a optional MaxIPC (which - in the absence of a "Decoders" stage
- can be used to simulate a different throughput from the decoders).
This stage is added to the default pipeline between the EntryStage and the
DispatchStage only if PipelineOption::MicroOpQueue is different than zero. By
default, llvm-mca sets PipelineOption::MicroOpQueue to the value of hidden flag
-micro-op-queue-size.
Throughput from the decoder can be simulated via another hidden flag named
-decoder-throughput. That flag allows us to quickly experiment with different
frontend throughputs. For targets that declare a loop buffer, flag
-decoder-throughput allows users to do multiple runs, each time simulating a
different throughput from the decoders.
This stage can/will be extended in future. For example, we could add a "buffer
full" event to notify bottlenecks caused by backpressure. flag
-decoder-throughput would probably go away if in future we delegate to another
stage (DecoderStage?) the simulation of a (potentially variable) throughput from
the decoders. For now, flag -decoder-throughput is "good enough" to run some
simple experiments.
Differential Revision: https://reviews.llvm.org/D59928
llvm-svn: 357248
Summary:
PowerPC64/PowerPC64le supports the builtin function __builtin_setrnd to set the floating point rounding mode. This function will use the least significant two bits of integer argument to set the floating point rounding mode.
double __builtin_setrnd(int mode);
The effective values for mode are:
0 - round to nearest
1 - round to zero
2 - round to +infinity
3 - round to -infinity
Note that the mode argument will modulo 4, so if the int argument is greater than 3, it will only use the least significant two bits of the mode. Namely, builtin_setrnd(102)) is equal to builtin_setrnd(2).
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D59405
llvm-svn: 357241
Some DAG mutations can only be applied to `ScheduleDAGMI`, and have to
internally cast a `ScheduleDAGInstrs` to `ScheduleDAGMI`.
There is nothing actually specific to `ScheduleDAGMI` in `Topo`.
llvm-svn: 357239
By extending OrderedBB to allow removing and replacing cached
instructions, we can preserve OrderedBBs in DSE easily. This eliminates
one source of quadratic compile time in DSE.
Fixes PR38829.
Reviewers: rnk, efriedma, hfinkel
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D59789
llvm-svn: 357208
If the caller can preserve the OBB, we can avoid recomputing the order
for each getDependency call.
Reviewers: efriedma, rnk, hfinkel
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D59788
llvm-svn: 357206
to unbreak the modular bots and its follow-up commit.
This reverts commit https://reviews.llvm.org/D59825
because it introduced a
fatal error: cyclic dependency in module 'LLVM_intrinsic_gen': LLVM_intrinsic_gen -> LLVM_IR -> LLVM_intrinsic_gen
llvm-svn: 357201
The issue here is that we actually allow CGSCC passes to mutate IR (and
therefore invalidate analyses) outside of the current SCC. At a minimum,
we need to support mutating parent and ancestor SCCs to support the
ArgumentPromotion pass which rewrites all calls to a function.
However, the analysis invalidation infrastructure is heavily based
around not needing to invalidate the same IR-unit at multiple levels.
With Loop passes for example, they don't invalidate other Loops. So we
need to customize how we handle CGSCC invalidation. Doing this without
gratuitously re-running analyses is even harder. I've avoided most of
these by using an out-of-band preserved set to accumulate the cross-SCC
invalidation, but it still isn't perfect in the case of re-visiting the
same SCC repeatedly *but* it coming off the worklist. Unclear how
important this use case really is, but I wanted to call it out.
Another wrinkle is that in order for this to successfully propagate to
function analyses, we have to make sure we have a proxy from the SCC to
the Function level. That requires pre-creating the necessary proxy.
The motivating test case now works cleanly and is added for
ArgumentPromotion.
Thanks for the review from Philip and Wei!
Differential Revision: https://reviews.llvm.org/D59869
llvm-svn: 357137
Split off from D59749. This adds isWrappedSet() and
isUpperSignWrapped() set with the same behavior as isSignWrappedSet()
and isUpperWrapped() for the respectively other domain.
The methods isWrappedSet() and isSignWrappedSet() will not consider
ranges of the form [X, Max] == [X, 0) and [X, SignedMax] == [X, SignedMin)
to be wrapping, while isUpperWrapped() and isUpperSignWrapped() will.
Also replace the checks in getUnsignedMin() and friends with method
calls that implement the same logic.
llvm-svn: 357112
Split out from D59749. The current implementation of isWrappedSet()
doesn't do what it says on the tin, and treats ranges like
[X, Max] as wrapping, because they are represented as [X, 0) when
using half-inclusive ranges. This also makes it inconsistent with
the semantics of isSignWrappedSet().
This patch renames isWrappedSet() to isUpperWrapped(), in preparation
for the introduction of a new isWrappedSet() method with corrected
behavior.
llvm-svn: 357107
The artifact combiners push instructions which have been marked for deletion
onto an list for the legalizer to deal with on return. However, for trunc(ext)
combines the combiner routine recursively calls itself. When it does this the
dead instructions list may not be empty, and the other combiners don't expect
to be dealing with essentially invalid MIR (multiple vreg defs etc).
This change fixes it by ensuring that the dead instructions are processed on
entry into tryCombineInstruction.
As a result, this fix exposed a few places in tests where G_TRUNC instructions
were not being deleted even though they were dead.
Differential Revision: https://reviews.llvm.org/D59892
llvm-svn: 357101
Rework BaseIndexOffset and isAlias to fully work with lifetime nodes
and fold in lifetime alias analysis.
This is mostly NFC.
Reviewers: courbet
Reviewed By: courbet
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59794
llvm-svn: 357070
A section containing metadata on remark diagnostics will be emitted if
the flag (-mllvm) -remarks-section is present.
For now, the metadata is:
* a magic number for remarks: "REMARKS\0"
* the version number: a little-endian uint64_t
* the absolute file path to the serialized remark diagnostics: a
null-terminated string.
Differential Revision: https://reviews.llvm.org/D59571
llvm-svn: 357043
Split off from D59749. This uses a simpler and more efficient
implementation of isSignWrappedSet(), and considers full sets
as non-wrapped, to be consistent with isWrappedSet(). Otherwise
the behavior is unchanged.
There are currently only two users of this function and both already
check for isFullSet() || isSignWrappedSet(), so this is not going to
cause a change in overall behavior.
Differential Revision: https://reviews.llvm.org/D59848
llvm-svn: 357039
When splitting a subrange we end up with two different subranges covering
two different, non overlapping, lanes.
As part of this splitting the VNIs of the original live-range need
to be dispatched to the subranges according to which lanes they are
actually defining.
Prior to this patch we were assuming that all values were defining
all lanes. This was wrong as demonstrated by llvm.org/PR40835.
Differential Revision: https://reviews.llvm.org/D59731
llvm-svn: 357032
We have the folds for fadd/fsub/fmul already in DAGCombiner,
so it may be possible to remove that code if we can guarantee that
these ops are zapped before they can exist.
llvm-svn: 357029
This reverts commit rL357020.
The commit broke the test llvm/test/tools/llvm-objdump/embedded-source.test
on some builds including clang-ppc64be-linux-multistage,
clang-s390x-linux, clang-with-lto-ubuntu, clang-x64-windows-msvc,
llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast (and others).
llvm-svn: 357026
This change implements lowering of references global symbols in PIC
mode.
This change implements lowering of global references in PIC mode using a
new @GOT reference type. @GOT references can be used with function or
data symbol names combined with the get_global instruction. In this case
the linker will insert the wasm global that stores the address of the
symbol (either in memory for data symbols or in the wasm table for
function symbols).
For now I'm continuing to use the R_WASM_GLOBAL_INDEX_LEB relocation
type for this type of reference which means that this relocation type
can refer to either a global or a function or data symbol. We could
choose to introduce specific relocation types for GOT entries in the
future. See the current dynamic linking proposal:
https://github.com/WebAssembly/tool-conventions/blob/master/DynamicLinking.md
Differential Revision: https://reviews.llvm.org/D54647
llvm-svn: 357022
Reapply rL356941 after regenerating the object file in the failing test
llvm/test/tools/llvm-objdump/embedded-source.test from source.
Original commit message:
[llvm] Prevent duplicate files in debug line header in dwarf 5.
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 357018
Found by inspection when looking at the debug output of MCA.
This problem was latent, and none of the upstream models were affected by it.
No functional change intended.
llvm-svn: 357000
Various SelectionDAG non-combine operations (e.g. the getNode smart
constructor and legalization) may leave dangling nodes by applying
optimizations or not fully pruning unused result values. This can
result in nodes that are never added to the worklist and therefore can
not be pruned.
Add a node inserter as the current node deleter to make sure such
nodes have the chance of being pruned.
Many minor changes, mostly positive.
llvm-svn: 356996
Summary: Add a binding to Function::lookupIntrinsicID so clients don't have to go searching the ID table themselves.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59697
llvm-svn: 356948
Summary:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Reviewers: dblaikie, probinson, aprantl, espindola
Reviewed By: probinson
Subscribers: emaste, jvesely, nhaehnle, aprantl, javed.absar, arichardson, hiraditya, MaskRay, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 356941
Moving this to base class TargetTransformInfoImplCRTPBase allows static_cast to
a subtarget so that calls to e.g. getMemcpyCost actually go the overridden
functions.
Differential revision: https://reviews.llvm.org/D59706
llvm-svn: 356873
This adds ConstantRange::getFull(BitWidth) and
ConstantRange::getEmpty(BitWidth) named constructors as more readable
alternatives to the current ConstantRange(BitWidth, /* full */ false)
and similar. Additionally private getFull() and getEmpty() member
functions are added which return a full/empty range with the same bit
width -- these are commonly needed inside ConstantRange.cpp.
The IsFullSet argument in the ConstantRange(BitWidth, IsFullSet)
constructor is now mandatory for the few usages that still make use of it.
Differential Revision: https://reviews.llvm.org/D59716
llvm-svn: 356852
As a followup to newpm -time-passes fix (D59366), now adding a similar
functionality to legacy time-passes.
Enhancing llvm::reportAndResetTimings to accept an optional stream
for reporting output. By default it still reports into the stream created
by CreateInfoOutputFile (-info-output-file).
Also fixing to actually reset after printing as declared.
Reviewed By: philip.pfaffe
Differential Revision: https://reviews.llvm.org/D59416
llvm-svn: 356824
Add basic infrastructure for reading and writting TBD files (version 1 - 3).
The TextAPI library is not used by anything yet (besides the unit tests). Tool
support will be added in a separate commit.
The TBD format is currently documented in the implementation file (TextStub.cpp).
https://reviews.llvm.org/D53945
Update: This contains changes to fix issues discovered by the bots:
- add parentheses to silence warnings.
- rename variables
- use PlatformType from BinaryFormat
- Trying if switching from a vector to an array will appeas the bots.
- Replace the tuple with a struct to work around an explicit constructor bug.
- This fixes an issue where we were leaking the YAML document if there was a
parsing error.
Updated the license information in all files.
llvm-svn: 356820
Summary:
Between building the pair map and querying it there are a few places that
erase and create Values. It's rare but the address of these newly created
Values is occasionally the same as a just-erased Value that we already
have in the pair map. These coincidences should be accounted for to avoid
non-determinism.
Thanks to Roman Tereshin for the test case.
Reviewers: rtereshin, bogner
Reviewed By: rtereshin
Subscribers: mgrang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59401
llvm-svn: 356803
Summary:
Adding contained caching to AliasAnalysis. BasicAA is currently the only one using it.
AA changes:
- This patch is pulling the caches from BasicAAResults to AAResults, meaning the getModRefInfo call benefits from the IsCapturedCache as well when in "batch mode".
- All AAResultBase implementations add the QueryInfo member to all APIs. AAResults APIs maintain wrapper APIs such that all alias()/getModRefInfo call sites are unchanged.
- AA now provides a BatchAAResults type as a wrapper to AAResults. It keeps the AAResults instance and a QueryInfo instantiated to batch mode. It delegates all work to the AAResults instance with the batched QueryInfo. More API wrappers may be needed in BatchAAResults; only the minimum needed is currently added.
MemorySSA changes:
- All walkers are now templated on the AA used (AliasAnalysis=AAResults or BatchAAResults).
- At build time, we optimize uses; now we create a local walker (lives only as long as OptimizeUses does) using BatchAAResults.
- All Walkers have an internal AA and only use that now, never the AA in MemorySSA. The Walkers receive the AA they will use when built.
- The walker we use for queries after the build is instantiated on AliasAnalysis and is built after building MemorySSA and setting AA.
- All static methods doing walking are now templated on AliasAnalysisType if they are used both during build and after. If used only during build, the method now only takes a BatchAAResults. If used only after build, the method now takes an AliasAnalysis.
Subscribers: sanjoy, arsenm, jvesely, nhaehnle, jlebar, george.burgess.iv, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59315
llvm-svn: 356783
Summary:
This patch adds the ability to read a yaml form of a minidump file and
write it out as binary. Apart from the minidump header and the stream
directory, only three basic stream kinds are supported:
- Text: This kind is used for streams which contain textual data. This
is typically the contents of a /proc file on linux (e.g.
/proc/PID/maps). In this case, we just put the raw stream contents
into the yaml.
- SystemInfo: This stream contains various bits of information about the
host system in binary form. We expose the data in a structured form.
- Raw: This kind is used as a fallback when we don't have any special
knowledge about the stream. In this case, we just print the stream
contents in hex.
For this code to be really useful, more stream kinds will need to be
added (particularly for things like lists of memory regions and loaded
modules). However, these can be added incrementally.
Reviewers: jhenderson, zturner, clayborg, aprantl
Subscribers: mgorny, lemo, llvm-commits, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59482
llvm-svn: 356753
Summary:
getRelocatedValue may compute incorrect value for SHT_RELA-typed relocation entries.
// DWARFDataExtractor.cpp
uint64_t DWARFDataExtractor::getRelocatedValue(uint32_t Size, uint32_t *Off,
...
// This formula is correct for REL, but may be incorrect for RELA if the value
// stored in the location (getUnsigned(Off, Size)) is not zero.
return getUnsigned(Off, Size) + Rel->Value;
In this patch, we
* refactor these visit* functions to include a new parameter `uint64_t A`.
Since these visit* functions are no longer used as visitors, rename them to resolve*.
+ REL: A is used as the addend. A is the value stored in the location where the
relocation applies: getUnsigned(Off, Size)
+ RELA: The addend encoded in RelocationRef is used, e.g. getELFAddend(R)
* and add another set of supports* functions to check if a given relocation type is handled.
DWARFObjInMemory uses them to fail early.
Reviewers: echristo, dblaikie
Reviewed By: echristo
Subscribers: mgorny, aprantl, aheejin, fedor.sergeev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57939
llvm-svn: 356729
This is the result of discussions on the list about how to deal with intrinsics
which require codegen to disambiguate them via only the integer/fp overloads.
It causes problems for GlobalISel as some of that information is lost during
translation, while with other operations like IR instructions the information is
encoded into the instruction opcode.
This patch changes clang to emit the new faddp intrinsic if the vector operands
to the builtin have FP element types. LLVM IR AutoUpgrade has been taught to
upgrade existing calls to aarch64.neon.addp with fp vector arguments, and
we remove the workarounds introduced for GlobalISel in r355865.
This is a more permanent solution to PR40968.
Differential Revision: https://reviews.llvm.org/D59655
llvm-svn: 356722
This adds support for scalarizing these intrinsics as well the X86TargetTransformInfo support to avoid scalarizing them in the cases X86 can handle.
I've omitted handling special cases for constant masks for this first pass. Though CodeGenPrepare can constant fold the branch conditions and remove some of the control flow anyway.
Fixes PR40994 and is covers most of PR3666. Might want to implement constant masks to close that.
Differential Revision: https://reviews.llvm.org/D59180
llvm-svn: 356687
Summary:
This patch adds basic support for reading minidump files. It contains
the definitions of various important minidump data structures (header,
stream directory), and of one minidump stream (SystemInfo). The ability
to read other streams will be added in follow-up patches. However, all
streams can be read even now as raw data, which means lldb's minidump
support (where this code is taken from) can be immediately rebased on
top of this patch as soon as it lands.
As we don't have any support for generating minidump files (yet), this
tests the code via unit tests with some small handcrafted binaries in
the form of c char arrays.
Reviewers: Bigcheese, jhenderson, zturner
Subscribers: srhines, dschuff, mgorny, fedor.sergeev, lemo, clayborg, JDevlieghere, aprantl, lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59291
llvm-svn: 356652
Code archaeology in D59315 revealed that MSSA should never be moved.
Rather than trying to check dynamically that this hasn't happened in the
verify() functions of Walkers, it's likely best to just delete its move
constructor.
Since all these verify() functions did is check that MSSA hasn't moved,
this allows us to remove these verify functions.
I can readd the verification checks if someone's super concerned about
us trying to `memcpy` MemorySSA or something somewhere, but I imagine we
have other problems if we're trying anything like that...
llvm-svn: 356641
Summary:
llvm-objdump (via libObject) validates DYLD_INFO rebase and bind
entries against the basic structure found in the Mach-O file before
evaluating the contents of those entries. Certain malformed Mach-Os can
defeat the validation check and force llvm-objdump (libObject) to crash.
The previous logic verified a rebase or bind started in a valid Mach-O
section, but did not verify that the section wholely contained the
fixup. It also generally allows rebases or binds to start immediately
after a valid section even if that range is not itself part of a valid
section. Finally, bind and rebase opcodes that indicate more than one
fixup (apply N times...) are not completely validated: only the first
and final fixups are checked.
The previous logic also rejected certain binaries as false positives.
Some bind and rebase opcodes can modify the state machine such that the
next bind or rebase will fail. libObject will reject these opcodes as
invalid in order to be helpful and print an error message associated
with the instruction that caused the problem, even though the binary is
not actually illegal until it consumes the invalid state in the state
machine. In other words, libObject may reject a Mach-O binary that
Apple's dynamic linker may consider legal. The original version of
macho-rebase-add-addr-uleb-too-big is an example of such a binary.
I have replaced the existing checkSegAndOffset and checkCountAndSkip
functions with a single function, checkSegAndOffsets, which validates
all of the fixups realized by a DYLD_INFO opcode. checkSegAndOffsets
verifies that a Mach-O section fully contains each fixup. Every fixup
realized by an opcode is validated, and some (but not all!)
inconsistencies in the state machine are allowed until a fixup is
realized. This means that libObject may fail on an opcode that realizes
a fixup, not on the opcode that introduced the arithmetic error.
Existing test cases have been modified to reflect the changes in error
messages returned by libObject. What's more, the test case for
macho-rebase-add-addr-uleb-too-big has been modified so that it actually
triggers the error condition; the new code in libObject considers the
original test binary "legal".
rdar://47797757
Reviewers: lhames, pete, ab
Reviewed By: pete
Subscribers: rupprecht, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59574
llvm-svn: 356629
Summary:
Implements a new target features section in assembly and object files
that records what features are used, required, and disallowed in
WebAssembly objects. The linker uses this information to ensure that
all objects participating in a link are feature-compatible and records
the set of used features in the output binary for use by optimizers
and other tools later in the toolchain.
The "atomics" feature is always required or disallowed to prevent
linking code with stripped atomics into multithreaded binaries. Other
features are marked used if they are enabled globally or on any
function in a module.
Future CLs will add linker flags for ignoring feature compatibility
checks and for specifying the set of allowed features, implement using
the presence of the "atomics" feature to control the type of memory
and segments in the linked binary, and add front-end flags for
relaxing the linkage policy for atomics.
Reviewers: aheejin, sbc100, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, mgrang, jfb, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59173
llvm-svn: 356610
Summary:
PAL metadata now supports both the old linear reg=val pairs format and
the new MsgPack format.
The MsgPack format uses YAML as its textual representation. On output to
YAML, a mnemonic name is provided for some hardware registers.
Differential Revision: https://reviews.llvm.org/D57028
Change-Id: I2bbaabaaca4b3574f7e03b80fbef7c7a69d06a94
llvm-svn: 356591
Summary:
This commit introduces a new AMDGPUPALMetadata class that:
* is inside the AMDGPU target;
* keeps an in-memory representation of PAL metadata;
* provides a method to read the frontend-supplied metadata from LLVM IR;
* provides methods for the asm printer to set metadata items;
* provides methods to write the metadata as a binary blob to put in a
.note record or as an asm directive;
* provides a method to read the metadata as a binary blob from a .note
record.
Because llvm-readobj cannot call directly into a target, I had to remove
llvm-readobj's ability to dump PAL metadata, pending a resolution to
https://reviews.llvm.org/D52821
Differential Revision: https://reviews.llvm.org/D57027
Change-Id: I756dc830894fcb6850324cdcfa87c0120eb2cf64
llvm-svn: 356582
This adds new function getMemcpyCost to TTI so that the cost of a memcpy can be
modeled and queried. The default implementation returns Expensive, but targets
can override this function to model the cost more accurately.
Differential Revision: https://reviews.llvm.org/D59252
llvm-svn: 356555
This reverts commit 6080a6fb19 (r356532).
Clang does not accept this syntax, so reverting this until I can find something that works across all compilers.
llvm-svn: 356533
Our minimum MSVC toolchain requirement is greater than 2015, so we don't
need this conditional macro anymore. New versions of MSVC apparently
have a header, xkeycheck.h, to check that keywords haven't been
redefined.
Fixes PR41144
llvm-svn: 356524
This adds a Remark class that allows us to share code when working with
remarks.
The C API has been updated to reflect this. Instead of the parser
generating C structs, it's now using a C++ object that is used through
opaque pointers in C. This gives us much more flexibility on what
changes we can make to the internal state of the object and interacts
much better with scenarios where the library is used through dlopen.
* C API updates:
* move from C structs to opaque pointers and functions
* the remark type is now an enum instead of a string
* unit tests updates:
* use mostly the C++ API
* keep one test for the C API
* rename to YAMLRemarksParsingTest
* a typo was fixed: AnalysisFPCompute -> AnalysisFPCommute.
* a new error message was added: "expected a remark tag."
* llvm-opt-report has been updated to use the C++ parser instead of the
C API
Differential Revision: https://reviews.llvm.org/D59049
Original llvm-svn: 356491
llvm-svn: 356519
This will allow targets more flexibility to replace the
register allocator core passes. In a future commit,
AMDGPU will run the core register assignment passes
twice, and will also want to disallow using the
standard -regalloc option.
llvm-svn: 356506
This adds a Remark class that allows us to share code when working with
remarks.
The C API has been updated to reflect this. Instead of the parser
generating C structs, it's now using a C++ object that is used through
opaque pointers in C. This gives us much more flexibility on what
changes we can make to the internal state of the object and interacts
much better with scenarios where the library is used through dlopen.
* C API updates:
* move from C structs to opaque pointers and functions
* the remark type is now an enum instead of a string
* unit tests updates:
* use mostly the C++ API
* keep one test for the C API
* rename to YAMLRemarksParsingTest
* a typo was fixed: AnalysisFPCompute -> AnalysisFPCommute.
* a new error message was added: "expected a remark tag."
* llvm-opt-report has been updated to use the C++ parser instead of the
C API
Differential Revision: https://reviews.llvm.org/D59049
llvm-svn: 356491
Add the convergent attribute to the WWM intrinsic to stop it ever being
sunk out of cfg.
Differential Revision: https://reviews.llvm.org/D59536
llvm-svn: 356470
Moving subprogram specific flags into DISPFlags makes IR code more readable.
In addition, we provide free space in DIFlags for other
'non-subprogram-specific' debug info flags.
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D59288
llvm-svn: 356454
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
This is a recommit of r356442 with trivial fixes for the failing tests.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356451
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356442
Summary:
After r355981, intrinsic arguments that are immediate values should be
marked as `ImmArg`.
Reviewers: dschuff, tlively
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59447
llvm-svn: 356437
This change makes linking into .build-id atomic and safe to use.
Some users under particular workflows are reporting that this races
more than half the time under particular conditions.
llvm-svn: 356404
The original change back in rL29307 explained this but it was
lost somewhere along the way.
Differential Revision: https://reviews.llvm.org/D59445
llvm-svn: 356402
After review comments, it was preferred to not teach MachineIRBuilder about
non-generic instructions beyond using buildInstr().
For AArch64 I've changed the buildCopy() calls to buildInstr() + a
separate addReg() call.
This also relaxes the MachineIRBuilder's COPY checking more because it may
not always have a SrcOp given to it.
llvm-svn: 356396
Before, empty debug streams were written as 8 bytes (4 bytes signature + 4 bytes for the GlobalRefs count).
With this patch, unused empty streams aren't emitted anymore. Modules now encode 65535 as an 'unused stream' value, by convention.
Also fix the * Linker * contrib section which wasn't correctly emitted previously.
Differential Revision: https://reviews.llvm.org/D59502
llvm-svn: 356395
This allows better code size for aarch64 floating point materialization
in a future patch.
Reviewers: evandro
Differential Revision: https://reviews.llvm.org/D58690
llvm-svn: 356389
AMDGPU would like to use these MVTs.
Differential Revision: https://reviews.llvm.org/D58901
Change-Id: I6125fea810d7cc62a4b4de3d9904255a1233ae4e
llvm-svn: 356351
AMDGPU would like to have MVTs for v3i32, v3f32, v5i32, v5f32. This
commit does not add them, but makes preparatory changes:
* Exclude non-legal non-power-of-2 vector types from ComputeRegisterProp
mechanism in TargetLoweringBase::getTypeConversion.
* Cope with SETCC and VSELECT for odd-width i1 vector when the other
vectors are legal type.
Some of this patch is from Matt Arsenault, also of AMD.
Differential Revision: https://reviews.llvm.org/D58899
Change-Id: Ib5f23377dbef511be3a936211a0b9f94e46331f8
llvm-svn: 356350
Following the suggestion in D59450, I'm moving the code for constructing
a ConstantRange from KnownBits out of ValueTracking, which also allows us
to test this code independently.
I'm adding this method to ConstantRange rather than KnownBits (which
would have been a bit nicer API wise) to avoid creating a dependency
from Support to IR, where ConstantRange lives.
Differential Revision: https://reviews.llvm.org/D59475
llvm-svn: 356339
Summary:
In the new wasm EH proposal, `rethrow` takes an `except_ref` argument.
This change was missing in r352598.
This patch adds `llvm.wasm.rethrow.in.catch` intrinsic. This is an
intrinsic that's gonna eventually be lowered to wasm `rethrow`
instruction, but this intrinsic can appear only within a catchpad or a
cleanuppad scope. Also this intrinsic needs to be invokable - otherwise
EH pad successor for it will not be correctly generated in clang.
This also adds lowering logic for this intrinsic in
`SelectionDAGBuilder::visitInvoke`. This routine is basically a
specialized and simplified version of
`SelectionDAGBuilder::visitTargetIntrinsic`, but we can't use it
because if is only for `CallInst`s.
This deletes the previous `llvm.wasm.rethrow` intrinsic and related
tests, which was meant to be used within a `__cxa_rethrow` library
function. Turned out this needs some more logic, so the intrinsic for
this purpose will be added later.
LateEHPrepare takes a result value of `catch` and inserts it into
matching `rethrow` as an argument.
`RETHROW_IN_CATCH` is a pseudo instruction that serves as a link between
`llvm.wasm.rethrow.in.catch` and the real wasm `rethrow` instruction. To
generate a `rethrow` instruction, we need an `except_ref` argument,
which is generated from `catch` instruction. But `catch` instrutions are
added in LateEHPrepare pass, so we use `RETHROW_IN_CATCH`, which takes
no argument, until we are able to correctly lower it to `rethrow` in
LateEHPrepare.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59352
llvm-svn: 356316
TimePassesHandler object (implementation of time-passes for new pass manager)
gains ability to report into a stream customizable per-instance (per pipeline).
Intended use is to specify separate time-passes output stream per each compilation,
setting up TimePasses member of StandardInstrumentation during PassBuilder setup.
That allows to get independent non-overlapping pass-times reports for parallel
independent compilations (in JIT-like setups).
By default it still puts timing reports into the info-output-file stream
(created by CreateInfoOutputFile every time report is requested).
Unit-test added for non-default case, and it also allowed to discover that print() does not work
as declared - it did not reset the timers, leading to yet another report being printed into the default stream.
Fixed print() to actually reset timers according to what was declared in print's comments before.
Reviewed By: philip.pfaffe
Differential Revision: https://reviews.llvm.org/D59366
llvm-svn: 356305
This relaxes some asserts about sizes, and adds an optional subreg parameter
to buildCopy().
Also update AArch64 instruction selector to use this in places where we
previously used MachineInstrBuilder manually.
Differential Revision: https://reviews.llvm.org/D59434
llvm-svn: 356304
Add functions to ConstantRange that determine whether the
unsigned/signed addition/subtraction of two ConstantRanges
may/always/never overflows. This will allow checking overflow
conditions based on known constant ranges in addition to known bits.
I'm implementing these methods on ConstantRange to allow them to be
unit tested independently of any ValueTracking machinery. The tests
include exhaustive testing on 4-bit ranges, to make sure the result
is both conservatively correct and maximally precise.
The OverflowResult enum is redeclared on ConstantRange, because
I wanted to avoid a dependency in either direction between
ValueTracking.h and ConstantRange.h.
Differential Revision: https://reviews.llvm.org/D59193
llvm-svn: 356276
Summary: Add bindings to create a wrapped "Add Discriminators" pass. Now that we have debug info support, this is a handy transform to have.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: dblaikie, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58624
llvm-svn: 356272
Summary:
Now that endian types support enumerations (D59141), the existing yaml
support for them is somewhat insufficient. The current solution was to
define the ScalarTraits class for these types, which always forwards to
the ScalarTraits of the underlying type. However, the enum types will
usually have ScalarEnumerationTraits of ScalarBitsetTraits.
In this patch I add the two extra Traits types to the endian types. In
order to properly SFINAE-ize them, I've also added an extra "Enable"
template argument to the Traits template classes.
Reviewers: zturner, sammccall
Subscribers: kristina, Bigcheese, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59289
llvm-svn: 356269
Summary:
The AliasSummary previously contained the AliaseeGUID, which was only
populated when reading the summary from bitcode. This patch changes it
to instead hold the ValueInfo of the aliasee, and always populates it.
This enables more efficient access to the ValueInfo (specifically in the
recent patch r352438 which needed to perform an index hash table lookup
using the aliasee GUID).
As noted in the comments in AliasSummary, we no longer technically need
to keep a pointer to the corresponding aliasee summary, since it could
be obtained by walking the list of summaries on the ValueInfo looking
for the summary in the same module. However, I am concerned that this
would be inefficient when walking through the index during the thin
link for various analyses. That can be reevaluated in the future.
By always populating this new field, we can remove the guard and special
handling for a 0 aliasee GUID when dumping the dot graph of the summary.
An additional improvement in this patch is when reading the summaries
from LLVM assembly we now set the AliaseeSummary field to the aliasee
summary in that same module, which makes it consistent with the behavior
when reading the summary from bitcode.
Reviewers: pcc, mehdi_amini
Subscribers: inglorion, eraman, steven_wu, dexonsmith, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D57470
llvm-svn: 356268
yaml2obj currently derives the p_filesz, p_memsz, and p_offset values of
program headers from their sections. This makes writing tests for
certain formats more complex, and sometimes impossible. This patch
allows setting these fields explicitly, overriding the default value,
when relevant.
Reviewed by: jakehehrlich, Higuoxing
Differential Revision: https://reviews.llvm.org/D59372
llvm-svn: 356247
This has been a very painful missing feature that has made producing
reduced testcases difficult. In particular the various registers
determined for stack access during function lowering were necessary to
avoid undefined register errors in a large percentage of
cases. Implement a subset of the important fields that need to be
preserved for AMDGPU.
Most of the changes are to support targets parsing register fields and
properly reporting errors. The biggest sort-of bug remaining is for
fields that can be initialized from the IR section will be overwritten
by a default initialized machineFunctionInfo section. Another
remaining bug is the machineFunctionInfo section is still printed even
if empty.
llvm-svn: 356215
The shift argument is defined to be modulo the bitwidth, so if that argument
is a constant, we can always reduce the constant to its minimal form to allow
better CSE and other follow-on transforms.
We need to be careful to ignore constant expressions here, or we will likely
infinite loop. I'm adding a general vector constant query for that case.
Differential Revision: https://reviews.llvm.org/D59374
llvm-svn: 356192
Summary:
The way c++ template argument deduction works, both arguments are used
to deduce the template type in the three-argument overload of
mapOptional. This is a problem if the types are slightly different, even
if they are implicitly convertible. This is fairly easy to trigger with
integral types, as the default type of most integral constants is int,
which then requires casting the constant to the type of the other
argument.
This patch fixes that by using a separate template type for the default
value, which is then cast to the type of the first argument. To avoid
this conversion triggerring conversions marged as explicit, we use
static_assert to check that the types are implicitly convertible.
Reviewers: zturner, sammccall
Subscribers: kristina, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59142
llvm-svn: 356157
This is consistent with what SelectionDAG does and is much easier to
work with than the extract sequence with an artificial wide register.
For the AMDGPU control flow intrinsics, this was producing an s128 for
the i64, i1 tuple return. Any legalization that should apply to a real
s128 value would badly obscure the direct values that need to be seen.
llvm-svn: 356147
Summary:
Add hooks for determining the policy used to decide whether/how
to chop off symbol 'suffixes' when locating a given function
in a sample profile.
Prior to this change, any function symbols of the form "X.Y" were
elided/truncated into just "X" when looking up things in a sample
profile data file.
With this change, the policy on suffixes can be changed by adding a
new attribute "sample-profile-suffix-elision-policy" to the function:
this attribute can have the value "all" (the default), "selected", or
"none". A value of "all" preserves the previous behavior (chop off
everything after the first "." character, then treat that as the
symbol name). A value of "selected" chops off only the rightmost
".llvm.XXXX" suffix (where "XXX" is any string not containing a "."
char). A value of "none" indicates that names should be left as is.
Subscribers: jdoerfert, wmi, mtrofin, danielcdh, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58832
llvm-svn: 356146
I found these by asserting in clang for any GCCBuiltin that doesn't
require mangling and requires a constant for the builtin. This means
that intrinsics are missing which don't use GCCBuiltin, don't have
builtins defined in clang, or were missing the constant annotation in
the builtin definition.
llvm-svn: 356144
getConstantVRegVal used to only look for G_CONSTANT when looking at
unboxing the value of a vreg. However, constants are sometimes not
directly used and are hidden behind trunc, s|zext or copy chain of
computation.
In particular this may be introduced by the legalization process that
doesn't want to simplify these patterns because it can lead to infine
loop when legalizing a constant.
To circumvent that problem, add a new variant of getConstantVRegVal,
named getConstantVRegValWithLookThrough, that allow to look through
extensions.
Differential Revision: https://reviews.llvm.org/D59227
llvm-svn: 356116
Summary:
In support of IBM's efforts to produce a viable C and C++ LLVM compiler for AIX
(ref: RFC at http://lists.llvm.org/pipermail/llvm-dev/2019-February/130175.html),
this patch adds customizations to the CMake files in order to properly
invoke the host toolchain for the build on AIX.
Additional changes to enable a successful build will follow.
Patch by Xing Xue
Reviewers: hubert.reinterpretcast, jasonliu, sfertile
Reviewed by: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D58250
llvm-svn: 356104
I found these by asserting in clang for any GCCBuiltin that doesn't
require mangling and requires a constant for the builtin. This means
that intrinsics are missing which don't use GCCBuiltin, don't have
builtins defined in clang, or were missing the constant annotation in
the builtin definition.
llvm-svn: 356093
I found these by asserting in clang for any GCCBuiltin that doesn't
require mangling and requires a constant for the builtin. This means
that intrinsics are missing which don't use GCCBuiltin, don't have
builtins defined in clang, or were missing the constant annotation in
the builtin definition.
llvm-svn: 356092
I found these by asserting in clang for any GCCBuiltin that doesn't
require mangling and requires a constant for the builtin. This means
that intrinsics are missing which don't use GCCBuiltin, don't have
builtins defined in clang, or were missing the constant annotation in
the builtin definition.
llvm-svn: 356091
I found these by asserting in clang for any GCCBuiltin that doesn't
require mangling and requires a constant for the builtin. This means
that intrinsics are missing which don't use GCCBuiltin, don't have
builtins defined in clang, or were missing the constant annotation in
the builtin definition.
I'm not sure what's going on with the immediates.ll test. It seems to
be intended to test invalid cases like this, but then tries to handle
some of them anyway. I've moved the cases that were inconsistent with
the GCCBuiltin definition so they don't test the codegen anymore.
llvm-svn: 356085
Summary:
MsgPackTypes has been replaced by the lighter-weight MsgPackDocument.
Differential Revision: https://reviews.llvm.org/D57025
Change-Id: Ia7069880ef29f55490abbe5d8ae15f25cc1490a4
llvm-svn: 356082
Summary:
MsgPackDocument is the lighter-weight replacement for MsgPackTypes. This
commit switches AMDGPU HSA metadata processing to use MsgPackDocument
instead of MsgPackTypes.
Differential Revision: https://reviews.llvm.org/D57024
Change-Id: I0751668013abe8c87db01db1170831a76079b3a6
llvm-svn: 356081
Summary:
A class that exposes a simple in-memory representation of a document of
MsgPack objects, that can be read from and written to MsgPack, read from
and written to YAML, and inspected and modified in memory. This is
intended to be a lighter-weight (in terms of memory allocations)
replacement for MsgPackTypes.
Two subsequent changes will:
1. switch AMDGPU HSA metadata to using MsgPackDocument instead of
MsgPackTypes;
2. add MsgPack AMDGPU PAL metadata via MsgPackDocument.
Differential Revision: https://reviews.llvm.org/D57023
Change-Id: Ie15a054831d5a6467c5867c064c8f8f6b80270e1
llvm-svn: 356080
Remove test cases that checked for not crashing when immediate operands were passed not an immediate. These are now considered ill-formed in IR.
This was done by manually scanning the intrinsic file for llvm_i32_ty and llvm_i8_ty which are the predominant types we use for immediates. Most of them are on vector intrinsics. I might have missed some other intrinsics.
Differential Revision: https://reviews.llvm.org/D58302
llvm-svn: 355993
This patch adds an XCOFF triple object format type into LLVM.
This XCOFF triple object file type will be used later by object file and assembly generation for the AIX platform.
Differential Revision: https://reviews.llvm.org/D58930
llvm-svn: 355989
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
Original llvm-svn: 355964
llvm-svn: 355984
This indicates an intrinsic parameter is required to be a constant,
and should not be replaced with a non-constant value.
Add the attribute to all AMDGPU and generic intrinsics that comments
indicate it should apply to. I scanned other target intrinsics, but I
don't see any obvious comments indicating which arguments are intended
to be only immediates.
This breaks one questionable testcase for the autoupgrade. I'm unclear
on whether the autoupgrade is supposed to really handle declarations
which were never valid. The verifier fails because the attributes now
refer to a parameter past the end of the argument list.
llvm-svn: 355981
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
llvm-svn: 355964
Summary:
This fixes an extremely long compile time caused by recursive analysis
of truncs, which were not previously subject to any depth limits unlike
some of the other ops. I decided to use the same control used for
sext/zext, since the routines analyzing these are sometimes mutually
recursive with the trunc analysis.
Reviewers: mkazantsev, sanjoy
Subscribers: sanjoy, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58994
llvm-svn: 355949
This patch adds a new option to SplitAllCriticalEdges and uses it to avoid splitting critical edges when the destination basic block ends with unreachable. Otherwise if we split the critical edge, sanitizer coverage will instrument the new block that gets inserted for the split. But since this block itself shouldn't be reachable this is pointless. These basic blocks will stick around and generate assembly, but they don't end in sane control flow and might get placed at the end of the function. This makes it look like one function has code that flows into the next function.
This showed up while compiling the linux kernel with clang. The kernel has a tool called objtool that detected the code that appeared to flow from one function to the next. https://github.com/ClangBuiltLinux/linux/issues/351#issuecomment-461698884
Differential Revision: https://reviews.llvm.org/D57982
llvm-svn: 355947
This is addressing the issue that we're not modeling the cost of clib functions
in TTI::getIntrinsicCosts and thus we're basically addressing this fixme:
// FIXME: This is wrong for libc intrinsics.
To enable analysis of clib functions, we not only need an intrinsic ID and
formal arguments, but also the actual user of that function so that we can e.g.
look at alignment and values of arguments. So, this is the initial plumbing to
pass the user of an intrinsinsic on to getCallCosts, which queries
getIntrinsicCosts.
Differential Revision: https://reviews.llvm.org/D59014
llvm-svn: 355901
Change from original commit: move test (that uses an X86 triple) into the X86
subdirectory.
Original description:
Gating vectorizing reductions on *all* fastmath flags seems unnecessary;
`reassoc` should be sufficient.
Reviewers: tvvikram, mkuper, kristof.beyls, sdesmalen, Ayal
Reviewed By: sdesmalen
Subscribers: dcaballe, huntergr, jmolloy, mcrosier, jlebar, bixia, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57728
llvm-svn: 355889
Summary:
Swift now generates PDBs for debugging on Windows. llvm and lldb
need a language enumerator value too properly handle the output
emitted by swiftc.
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59231
llvm-svn: 355882
Overloaded intrinsics aren't necessarily safe for instruction selection. One
such intrinsic is aarch64.neon.addp.*.
This is a temporary workaround to ensure that we always fall back on that
intrinsic. Eventually this will be replaced with a proper solution.
https://bugs.llvm.org/show_bug.cgi?id=40968
Differential Revision: https://reviews.llvm.org/D59062
llvm-svn: 355865
It hasn't seen active development in years, and it hasn't reached a
state where it was useful.
Remove the code until someone is interested in working on it again.
Differential Revision: https://reviews.llvm.org/D59133
llvm-svn: 355862
Fixes https://bugs.llvm.org/show_bug.cgi?id=36796.
Implement basic legalizations (PromoteIntRes, PromoteIntOp,
ExpandIntRes, ScalarizeVecOp, WidenVecOp) for VECREDUCE opcodes.
There are more legalizations missing (esp float legalizations),
but there's no way to test them right now, so I'm not adding them.
This also includes a few more changes to make this work somewhat
reasonably:
* Add support for expanding VECREDUCE in SDAG. Usually
experimental.vector.reduce is expanded prior to codegen, but if the
target does have native vector reduce, it may of course still be
necessary to expand due to legalization issues. This uses a shuffle
reduction if possible, followed by a naive scalar reduction.
* Allow the result type of integer VECREDUCE to be larger than the
vector element type. For example we need to be able to reduce a v8i8
into an (nominally) i32 result type on AArch64.
* Use the vector operand type rather than the scalar result type to
determine the action, so we can control exactly which vector types are
supported. Also change the legalize vector op code to handle
operations that only have vector operands, but no vector results, as
is the case for VECREDUCE.
* Default VECREDUCE to Expand. On AArch64 (only target using VECREDUCE),
explicitly specify for which vector types the reductions are supported.
This does not handle anything related to VECREDUCE_STRICT_*.
Differential Revision: https://reviews.llvm.org/D58015
llvm-svn: 355860
Summary:
Extract the functionality of eliminating unreachable basic blocks
within a function, previously encapsulated within the
-unreachableblockelim pass, and make it available as a function within
BlockUtils.h. No functional change intended other than making the logic
reusable.
Exposing this logic makes it easier to implement
https://reviews.llvm.org/D59068, which fixes coroutines bug
https://bugs.llvm.org/show_bug.cgi?id=40979.
Reviewers: mkazantsev, wmi, davidxl, silvas, davide
Reviewed By: davide
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59069
llvm-svn: 355846
AMDGPU target run out of Subtarget feature flags hitting the limit of 64.
AssemblerPredicates uses at most uint64_t for their representation.
At the same time CodeGen has exhausted this a long time ago and switched
to a FeatureBitset with the current limit of 192 bits.
This patch completes transition to the bitset for feature bits extending
it to asm matcher and MC code emitter.
Differential Revision: https://reviews.llvm.org/D59002
llvm-svn: 355839
Narrow Scalar G_MUL for MIPS32.
Revisit NarrowScalar implementation in LegalizerHelper.
Introduce new helper function multiplyRegisters.
It performs generic multiplication of values held in multiple registers.
Generated instructions use only types NarrowTy and i1.
Destination can be same or two times size of the source.
Differential Revision: https://reviews.llvm.org/D58824
llvm-svn: 355814
Summary:
Binary formats often include various enumerations or bitsets, but using
endian-specific types for accessing them is tricky because they
currently only support integral types. This is particularly true for
scoped enums (enum class), as these are not implicitly convertible to
integral types, and so one has to perform two casts just to read the
enum value.
This fixes that support by adding first-class support for enumeration
types to endian-specific types. The support for them was already almost
working -- all I needed to do was overload getSwappedBytes for
enumeration types (which casts the enum to its underlying type and performs the
conversion there). I also add some convenience template aliases to simplify
declaring endian-specific enums.
Reviewers: Bigcheese, zturner
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59141
llvm-svn: 355812
Includes a fix to emit a CheckOpcode for build_vector when immAllZerosV/immAllOnesV is used as a pattern root. This means it can't be used to look through bitcasts when used as a root, but that's probably ok. This extra CheckOpcode will ensure that the first match in the isel table will be a SwitchOpcode which is needed by the caching optimization in the ISel Matcher.
Original commit message:
Previously we had build_vector PatFrags that called ISD::isBuildVectorAllZeros/Ones. Internally the ISD::isBuildVectorAllZeros/Ones look through bitcasts, but we aren't able to take advantage of that in isel. Instead of we have to canonicalize the types of the all zeros/ones build_vectors and insert bitcasts. Then we have to pattern match those exact bitcasts.
By emitting specific matchers for these 2 nodes, we can make isel look through any bitcasts without needing to explicitly match them. We should also be able to remove the canonicalization to vXi32 from lowering, but I've left that for a follow up.
This removes something like 40,000 bytes from the X86 isel table.
Differential Revision: https://reviews.llvm.org/D58595
llvm-svn: 355784
InstructionSimplify currently has some code to determine the constant
range of integer instructions for some simple cases. It is used to
simplify icmps.
This change moves the relevant code into ValueTracking as
llvm::computeConstantRange(), so it can also be reused for other
purposes.
In particular this is with the optimization of overflow checks in
mind (ref D59071), where constant ranges cover some cases that
known bits don't.
llvm-svn: 355781
Specifically, compute and Print Type and Section columns.
This is a re-commit of rL354833, after fixing the Asan problem found a a buildbot.
Differential Revision: https://reviews.llvm.org/D59060
llvm-svn: 355742
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355685
Summary:
Right now, when we encounter a string equality check,
e.g. `if (memcmp(a, b, s) == 0)`, we try to expand to a comparison if `s` is a
small compile-time constant, and fall back on calling `memcmp()` else.
This is sub-optimal because memcmp has to compute much more than
equality.
This patch replaces `memcmp(a, b, s) == 0` by `bcmp(a, b, s) == 0` on platforms
that support `bcmp`.
`bcmp` can be made much more efficient than `memcmp` because equality
compare is trivially parallel while lexicographic ordering has a chain
dependency.
Subscribers: fedor.sergeev, jyknight, ckennelly, gchatelet, llvm-commits
Differential Revision: https://reviews.llvm.org/D56593
llvm-svn: 355672
to get the modules bots running again.
The LLVM_DEBUG macro only plays well with a modular build of LLVM when
the header is marked as textual, but doing so causes redefinition
errors.
llvm-svn: 355653
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355585
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355522
Summary:
This adds support for 64 bit buffer atomic arithmetic instructions but does not include
cmpswap as that depends on a fix to the way the register pairs are handled
Change-Id: Ib207ea65fb69487ccad5066ea647ae8ddfe2ce61
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58918
llvm-svn: 355520
This allows us to store more info about where we're emitting the remarks
without cluttering LLVMContext. This is needed for future support for
the remark section.
Differential Revision: https://reviews.llvm.org/D58996
Original llvm-svn: 355507
llvm-svn: 355514
This allows us to store more info about where we're emitting the remarks
without cluttering LLVMContext. This is needed for future support for
the remark section.
Differential Revision: https://reviews.llvm.org/D58996
llvm-svn: 355507
Summary:
This allows generic code to query these parameters, and is a common
practice in a lot of other template classes.
Reviewers: zturner, Bigcheese
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58969
llvm-svn: 355504
Some target might try to subclass the PostGenericScheduler to custom the scheduling strategy.
We need to declare the member data of PostGenericScheduler as "protected", which acts the same as "GenericScheduler".
Differential Revision: https://reviews.llvm.org/D58949
llvm-svn: 355475
Summary:
This tag is documented in https://docs.oracle.com/cd/E19253-01/817-1984/chapter6-42444/index.html
Though I could not find some docs that describe it in detail, I found some code snippets.
1.
```
/*
* Look up the string in the string table and get its offset. If
* this succeeds, then it is possible that there is a DT_NEEDED
* dynamic entry that references it.
*/
have_string = elfedit_sec_findstr(argstate->str.sec,
strpad_elt.dn_dyn.d_un.d_val, arg, &str_offset) != 0;
if (have_string) {
dyn = argstate->dynamic.data;
for (ndx = 0; ndx < numdyn; dyn++, ndx++) {
if (((dyn->d_tag == DT_NEEDED) ||
(dyn->d_tag == DT_USED)) &&
(dyn->d_un.d_val == str_offset))
goto done;
}
}
```
80192cd83b/usr/src/cmd/sgs/elfedit/modules/common/syminfo.c (L512)
2.
```
case DT_USED:
case DT_INIT_ARRAY:
case DT_FINI_ARRAY:
if (do_dynamic)
{
if (entry->d_tag == DT_USED
&& VALID_DYNAMIC_NAME (entry->d_un.d_val))
{
char *name = GET_DYNAMIC_NAME (entry->d_un.d_val);
if (*name)
{
printf (_("Not needed object: [%s]\n"), name);
break;
}
}
print_vma (entry->d_un.d_val, PREFIX_HEX);
putchar ('\n');
}
break;
```
http://web.mit.edu/freebsd/head/contrib/binutils/binutils/readelf.c
3.
```
#define DT_USED 0x7ffffffe /* ignored - same as needed */
```
https://github.com/switchbrew/switch-tools/blob/master/src/elf_common.h
Reviewers: jhenderson, grimar
Reviewed By: jhenderson, grimar
Subscribers: emaste, krytarowski, fedor.sergeev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58762
llvm-svn: 355468
Getting rid of the name "optimization remarks" for anything that
involves handling remarks on the client side.
It's safer to do this now, before we get stuck with that name in all the
APIs and public interfaces we decide to export to users in the future.
This renames llvm/tools/opt-remarks to llvm/tools/remarks-shlib, and now
generates `libRemarks.dylib` instead of `libOptRemarks.dylib`.
Differential Revision: https://reviews.llvm.org/D58535
llvm-svn: 355439
This caused the first matcher in the isel table for many targets to Opc_Scope instead of Opc_SwitchOpcode. This leads to a significant increase in isel match failures.
llvm-svn: 355433
These arrays are both keyed by CPU name and go into the same tablegenerated file. Merge them so we only need to store keys once.
This also removes a weird space saving quirk where we used the ProcDesc.size() to create to build an ArrayRef for ProcSched.
Differential Revision: https://reviews.llvm.org/D58939
llvm-svn: 355431
The description for CPUs was just the CPU name wrapped with "Select the " and " processor". We can just do that directly in the help printer instead of making a separate version in the binary for each CPU.
Also remove the Value field that isn't needed and was always 0.
Differential Revision: https://reviews.llvm.org/D58938
llvm-svn: 355429
The SubtargetFeature class managed a list of features as strings. And it also had functions for setting bits in a FeatureBitset.
The methods that operated on the Feature list as strings are used in other parts of the backend. But the parts that operate on FeatureBitset are very tightly coupled to MCSubtargetInfo and requires passing in the arrays that MCSubtargetInfo owns. And the same struct type is used for ProcFeatures and ProcDesc.
This has led to MCSubtargetInfo having 2 arrays keyed by CPU name. One containing a mapping from a CPU name to its features. And one containing a mapping from CPU name to its scheduler model.
I would like to make a single CPU array containing all CPU information and remove some unneeded fields the ProcDesc array currently has. But I don't want to make SubtargetFeatures.h have to know about the scheduler model type and have to forward declare or pull in the header file.
Differential Revision: https://reviews.llvm.org/D58937
llvm-svn: 355428
Currently one can concatenate strings using hash(#),
but not lists, although that would be a natural thing to do.
This patch allows one to write something like:
def : A<!listconcat([1,2], [3,4])>;
simply as :
def : A<[1,2] # [3,4]>;
This was missing feature was highlighted by Nicolai
at FOSDEM talk.
Reviewed by: nhaehnle, hfinkel
Differential Revision: https://reviews.llvm.org/D58895
llvm-svn: 355414
David Stenberg