As it turns out, whether we zero-extend or sign-extend i8/i16 constants, which
are illegal types promoted to i32 on PowerPC, is a choice constrained by
assumptions within the infrastructure. Specifically, the logic in
FunctionLoweringInfo::ComputePHILiveOutRegInfo assumes that constant PHI
operands will be zero extended, and so, at least when materializing constants
that are PHI operands, we must do the same.
The rest of our fast-isel implementation does not appear to depend on the fact
that we were sign-extending i8/i16 constants, and all other targets also appear
to zero-extend small-bitwidth constants in fast-isel; we'll now do the same (we
had been doing this only for i1 constants, and sign-extending the others).
Fixes PR27721.
llvm-svn: 280614
CGP currently drops select's MD_prof profile data when
generating conditional branch which can lead to bad
code layout. The patch fixes the issue.
Differential Revision: http://reviews.llvm.org/D24169
llvm-svn: 280600
Summary:
This contains two changes that reduce the time spent in WQM, with the
intention of reducing bandwidth required by VMEM loads:
1. Sampling instructions by themselves don't need to run in WQM, only their
coordinate inputs need it (unless of course there is a dependent sampling
instruction). The initial scanInstructions step is modified accordingly.
2. When switching back from WQM to Exact, switch back as soon as possible.
This affects the logic in processBlock.
This should always be a win or at best neutral.
There are also some cleanups (e.g. remove unused ExecExports) and some new
debugging output.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D22092
llvm-svn: 280590
Summary:
This fixes a rare bug in polygon stippling with non-monolithic pixel shaders.
The underlying problem is as follows: the prolog part contains the polygon
stippling sequence, i.e. a kill. The main part then enables WQM based on the
_reduced_ exec mask, effectively undoing most of the polygon stippling.
Since we cannot know whether polygon stippling will be used, the main part
of a non-monolithic shader must always return to exact mode to fix this
problem.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D23131
llvm-svn: 280589
readlane/writelane do not support using m0 as the output/input.
Constrain the register class of spill vregs to try to avoid this,
but also handle spilling of the physreg when necessary by inserting
an additional copy to a normal SGPR.
llvm-svn: 280584
When we have an offset into a global, etc. that is accessed relative to the TOC
base pointer, and the offset is larger than the minimum alignment of the global
itself and the TOC base pointer (which is 8-byte aligned), we can still fold
the @toc@ha into the memory access, but we must update the addis instruction's
symbol reference with the offset as the symbol addend. When there is only one
use of the addi to be folded and only one use of the addis that would need its
symbol's offset adjusted, then we can make the adjustment and fold the @toc@l
into the memory access.
llvm-svn: 280545
Subregister definitions are considered uses for the purpose of tracking
liveness of the whole register. At the same time, when calculating live
interval subranges, subregister defs should not be treated as uses.
Differential Revision: https://reviews.llvm.org/D24190
llvm-svn: 280532
This fixes a regression introduced by revision 268094.
Revision 268094 added the following dag combine rule:
// trunc (shl x, K) -> shl (trunc x), K => K < vt.size / 2
That rule converts a truncate of a shift-by-constant into a shift of a truncated
value. We do this only if the shift count is less than half the size in bits of
the truncated value (K < vt.size / 2).
The problem is that the constraint on the shift count is incorrect, so the rule
doesn't work well in some cases involving vector types. The combine rule should
have been written instead like this:
// trunc (shl x, K) -> shl (trunc x), K => K < vt.getScalarSizeInBits()
Basically, if K is smaller than the "scalar size in bits" of the truncated value
then we know that by "sinking" the truncate into the operand of the shift we
would never accidentally make the shift undefined.
This patch fixes the check on the shift count, and adds test cases to make sure
that we don't regress the behavior.
Differential Revision: https://reviews.llvm.org/D24154
llvm-svn: 280482
As Sanjay suggested when he added the hook, PPC should return true from
hasAndNotCompare. We have an efficient negated 'and' on PPC (which can feed a
compare).
Fixes PR27203.
llvm-svn: 280457
Following a suggestion by Sanjay, we should lower:
%shl = shl i32 1, %y
%and = and i32 %x, %shl
%cmp = icmp eq i32 %and, %shl
ret i1 %cmp
into:
subfic r4, r4, 32
rlwnm r3, r3, r4, 31, 31
Add this pattern and some associated patterns for the 64-bit case and the
not-equal case. Fixes PR27356.
llvm-svn: 280454
When applying our address-formation PPC64 peephole, we are reusing the @ha TOC
addis value with the low parts associated with different offsets (i.e.
different effective symbol addends). We were assuming this was okay so long as
the offsets were less than the alignment of the global variable being accessed.
This ignored the fact, however, that the TOC base pointer itself need only be
8-byte aligned. As a result, what we were doing is legal only for offsets less
than 8 regardless of the alignment of the object being accessed.
Fixes PR28727.
llvm-svn: 280441
The logic in this function assumes that the P8 supports fusion of addis/addi,
but it does not. As a result, there is no advantage to restricting our peephole
application, merging addi instructions into dependent memory accesses, even
when the addi has multiple users, regardless of whether or not we're optimizing
for size.
We might need something like this again for the P9; I suspect we'll revisit
this code when we work on P9 tuning.
llvm-svn: 280440
When expanding a SETCC for which the low half is known to evaluate to false,
we can only throw it away for LT/GT comparisons, not LE/GE.
This fixes PR29170.
Differential Revision: https://reviews.llvm.org/D24151
llvm-svn: 280424
Prior to this, we could generate a vector_shuffle from an IR shuffle when the
size of the result was exactly the sum of the sizes of the input vectors.
If the output vector was narrower - e.g. a <12 x i8> being formed by a shuffle
with two <8 x i8> inputs - we would lower the shuffle to a sequence of extracts
and inserts.
Instead, we can form a larger vector_shuffle, and then extract a subvector
of the right size - e.g. shuffle the two <8 x i8> inputs into a <16 x i8>
and then extract a <12 x i8>.
This also includes a target-specific X86 combine that in the presence of
AVX2 combines:
(vector_shuffle <mask> (concat_vectors t1, undef)
(concat_vectors t2, undef))
into:
(vector_shuffle <mask> (concat_vectors t1, t2), undef)
in cases where this allows us to form VPERMD/VPERMQ.
(This is not a separate commit, as that pattern does not appear without
the DAGBuilder change.)
llvm-svn: 280418
Summary: This patch adds asm.js-style setjmp/longjmp handling support for WebAssembly. It also uses JavaScript's try and catch mechanism.
Reviewers: jpp, dschuff
Subscribers: jfb, dschuff
Differential Revision: https://reviews.llvm.org/D24121
llvm-svn: 280415
They're another source of generic vregs, which are going to need a type on the
definition when we remove the register width from MachineRegisterInfo.
llvm-svn: 280412
According to spec cvtdq2pd and cvtps2pd instructions don't require memory operand to be aligned
to 16 bytes. This patch removes this requirement from the memory folding table.
Differential Revision: https://reviews.llvm.org/D23919
llvm-svn: 280402
Add runtime metdata for pointee alignment of pointer type kernel argument. The key is KeyArgPointeeAlign and the value is a 32 bit unsigned integer.
Differential Revision: https://reviews.llvm.org/D24145
llvm-svn: 280399
Legalization tends to create anyext(trunc) patterns. This should always be
combined - into either a single trunc, a single ext, or nothing if the
types match exactly. But if we happen to combine the trunc first, we may pull
the trunc away from the anyext or make it implicit (e.g. the truncate(extract)
-> extract(bitcast) fold).
To prevent this, we can avoid doing the fold, similarly to how we already handle
fpround(fpextend).
Differential Revision: https://reviews.llvm.org/D23893
llvm-svn: 280386
This scheduler describes a processor which covers all MIPS ISAs based
around the interAptiv and P5600 timings.
Reviewers: vkalintiris, dsanders
Differential Revision: https://reviews.llvm.org/D23551
llvm-svn: 280374
This was a real restriction in the original version of SinkIfThenCodeToEnd. Now it's been rewritten, the restriction can be lifted.
As part of this, we handle a very common and useful case where one of the incoming branches is actually conditional. Consider:
if (a)
x(1);
else if (b)
x(2);
This produces the following CFG:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ | /
[ end ]
[end] has two unconditional predecessor arcs and one conditional. The conditional refers to the implicit empty 'else' arc. This same pattern can also be caused by an empty default block in a switch.
We can't sink the call to x() down to end because no call to x() happens on the third incoming arc (assume that x() has sideeffects for the sake of argument; if something is safe to speculate we could indeed sink nevertheless but this cannot happen in the general case and causes many extra selects).
We are now able to detect this case and split off the unconditional arcs to a common successor:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ / |
[sink.split] |
\ /
[ end ]
Now we can sink the call to x() into %sink.split. This can cause significant code simplification in many testcases.
llvm-svn: 280364
LLVM has an @llvm.eh.dwarf.cfa intrinsic, used to lower the GCC-compatible
__builtin_dwarf_cfa() builtin. As pointed out in PR26761, this is currently
broken on PowerPC (and likely on ARM as well). Currently, @llvm.eh.dwarf.cfa is
lowered using:
ADD(FRAMEADDR, FRAME_TO_ARGS_OFFSET)
where FRAME_TO_ARGS_OFFSET defaults to the constant zero. On x86,
FRAME_TO_ARGS_OFFSET is lowered to 2*SlotSize. This setup, however, does not
work for PowerPC. Because of the way that the stack layout works, the canonical
frame address is not exactly (FRAMEADDR + FRAME_TO_ARGS_OFFSET) on PowerPC
(there is a lower save-area offset as well), so it is not just a matter of
implementing FRAME_TO_ARGS_OFFSET for PowerPC (unless we redefine its
semantics -- We can do that, since it is currently used only for
@llvm.eh.dwarf.cfa lowering, but the better to directly lower the CFA construct
itself (since it can be easily represented as a fixed-offset FrameIndex)). Mips
currently does this, but by using a custom lowering for ADD that specifically
recognizes the (FRAMEADDR, FRAME_TO_ARGS_OFFSET) pattern.
This change introduces a ISD::EH_DWARF_CFA node, which by default expands using
the existing logic, but can be directly lowered by the target. Mips is updated
to use this method (which simplifies its implementation, and I suspect makes it
more robust), and updates PowerPC to do the same.
Fixes PR26761.
Differential Revision: https://reviews.llvm.org/D24038
llvm-svn: 280350
As discussed in https://reviews.llvm.org/D22666, our current mechanism to
support -pg profiling, where we insert calls to mcount(), or some similar
function, is fundamentally broken. We insert these calls in the frontend, which
means they get duplicated when inlining, and so the accumulated execution
counts for the inlined-into functions are wrong.
Because we don't want the presence of these functions to affect optimizaton,
they should be inserted in the backend. Here's a pass which would do just that.
The knowledge of the name of the counting function lives in the frontend, so
we're passing it here as a function attribute. Clang will be updated to use
this mechanism.
Differential Revision: https://reviews.llvm.org/D22825
llvm-svn: 280347
Summary:
This change promotes the 'isTailCall(...)' member function to
TargetInstrInfo as a query interface for determining on a per-target
basis whether a given MachineInstr is a tail call instruction. We build
upon this in the XRay instrumentation pass to emit special sleds for
tail call optimisations, where we emit the correct kind of sled.
The tail call sleds look like a mix between the function entry and
function exit sleds. Form-wise, the sled comes before the "jmp"
instruction that implements the tail call similar to how we do it for
the function entry sled. Functionally, because we know this is a tail
call, it behaves much like an exit sled -- i.e. at runtime we may use
the exit trampolines instead of a different kind of trampoline.
A follow-up change to recognise these sleds will be done in compiler-rt,
so that we can start intercepting these initially as exits, but also
have the option to have different log entries to more accurately reflect
that this is actually a tail call.
Reviewers: echristo, rSerge, majnemer
Subscribers: mehdi_amini, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D23986
llvm-svn: 280334
Summary: This patch adds asm.js-style setjmp/longjmp handling support for WebAssembly. It also uses JavaScript's try and catch mechanism.
Reviewers: jpp, dschuff
Subscribers: jfb, dschuff
Differential Revision: https://reviews.llvm.org/D23928
llvm-svn: 280302
This reverts commit r280268, it causes all MSVC 2013 to ICE. This
appears to have been fixed in a later MSVC 2013 update, because I cannot
reproduce it locally. That said, all upstream LLVM bots are broken right
now, so I am reverting.
Also reverts dependent change r280275, "[Hexagon] Deal with undefs when
extending live intervals".
llvm-svn: 280301
More preparation for dropping source types from MachineInstrs: regsters coming
out of already-selected code (i.e. non-generic instructions) don't have a type,
but that information is needed so we must add it manually.
This is done via a new G_TYPE instruction.
llvm-svn: 280292
Summary:
If the register has a negative value then unsigned overflow will occur;
this case is sometimes even created intentionally by LSR. For now
disable GA+reg folding. Fixes PR29127
Differential Revision: https://reviews.llvm.org/D24053
llvm-svn: 280285
Simon Pilgrim