rG210d72e9d6b4a8e7633921d0bd7186fd3c7a2c8c moved the check from
builtin-config-ix to config-ix so that the check would be made even when
the builtins are not built. However, now the check is no longer made
when the builtins are built standalone which causes the builtins to fail
to build.
Add the check back to builtins-config-ix so that the check gets
performed both when the builtins are not built, and when they are built
standalone.
Reviewed By: smeenai
Differential Revision: https://reviews.llvm.org/D110879
This way, we do not need to set LLVM_CMAKE_PATH to LLVM_CMAKE_DIR when (NOT LLVM_CONFIG_FOUND)
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D107717
Previously we used the minimum deployment target used for the platform
(e.g. iOS is 9.0). Unfortunately this leads to ABI incompatibilities with
arm64e devices running newer OSs. In particular the following TSan test
cases that used libcxx would fail due to the ABI mismatch.
* Darwin/libcxx-shared-ptr-recursive.mm
* Darwin/libcxx-shared-ptr-stress.mm
* Darwin/libcxx-shared-ptr.mm
* libcxx/std_shared_ptr.cpp
Given that arm64e is not ABI stable we should ideally match the
deployment target for sanitizer runtimes and their tests cases to the
device when building for arm64e. Unfortunately having a mixed deployment
target (based on architecture) isn't currently supported by the build system
and is non-trivial to implement.
As a stop-gap measure this patch changes the sanitizer test suites (but not the
sanitizer runtimes themselves) to use a newer deployment target when
targetting arm64e.
The deployment target used for arm64e is the SDK version because this
"should" match the OS version running on the target device (it is a
configuration error to not match them).
rdar://83080611
9ee64c3746 has started using
COMPILER_RT_HAS_OMIT_FRAME_POINTER_FLAG inside scudo. However,
the relevant CMake check was performed in builtin-config-ix.cmake,
so the definition was missing when builtins were not built. Move
the check to config-ix.cmake, so that it runs unconditionally of
the components being built.
Fixes PR#51847
Differential Revision: https://reviews.llvm.org/D109812
This updates llvm/utils/sysroot.py to include the "DIA SDK" folder in the
sysroot.
It also updates the build to look for the DIA SDK there if a sysroot is set.
This requires moving LLVM_WINSYSROOT to config-ix.cmake.
For the GN build, I chose to pass a qualified path to diaguids in libs instead
of pushing a config with a `/libpath:` flag. The former requires a GN with
https://gn-review.googlesource.com/c/gn/+/12200, the latter requires D109624.
The former is more like the cmake build, arguably a bit simpler, and it's
easier to check for the wrong GN revision and easier to update GN.
Differential Revision: https://reviews.llvm.org/D109708
Don't print stderr to commandline when configuring compiler-rt for
darwin platforms. NFC.
Reviewed By: delcypher
Differential Revision: https://reviews.llvm.org/D108156
Before, COMPILER_RT_TEST_COMPILER was used which pointed to a C compiler. While
it is incorrect to assume either of these is the default compiler, using the
C++ one allows for linking cpp tests.
Differential Revision: https://reviews.llvm.org/D109207
The __attribute__((format)) was added somewhere in 2012,
the lost during refactoring, then re-added in 2014 but
to te source files, which is a no-op.
Move it back to header files so that it actually takes effect.
But over the past 7 years we've accumulated whole lot of
format string bugs of different types, so disable the warning
with -Wno-format for now for incremental clean up.
Among the bugs that it warns about are all kinds of bad things:
- wrong sizes of arguments
- missing/excessive arguments
- printing wrong things (e.g. *ptr instead of ptr)
- completely messed up format strings
- security issues where external string is used as format
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D107977
When the builtins library isn't found, find_compiler_rt_library
returns NOTFOUND so we'll end up linking against -lNOTFOUND. We need
to check the return value before adding it to the list.
Differential Revision: https://reviews.llvm.org/D107627
This change adds tests to make sure that SCUDO is being properly
included with llvm libc. This change also adds the toggles to properly
use SCUDO, as GWP-ASan is enabled by default and must be included for
SCUDO to function.
Reviewed By: sivachandra, hctim
Differential Revision: https://reviews.llvm.org/D106919
As code diverge from Google style we need
to add more and more exceptions to suppress
conflicts with clang-format and clang-tidy.
As this point it does not provide a additional value.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D107197
Android has its own CMAKE_SYSTEM_NAME, but the OS is Linux (Android
target triples look like aarch64-none-linux-android21). The driver will
therefore search for compiler-rt libraries in the "linux" directory and
not the "android" directory, so the default placement of Android
compiler-rt libraries was incorrect. You could fix it by specifying
COMPILER_RT_OS_DIR manually, but it also makes sense to fix the default,
to save others from having to discover and fix the issue for themselves.
On Apple platforms the builtins may be built for both arm64 and arm64e.
With Makefile generators separate targets are built using Make sub-invocations.
This causes a race when creating the symlink which may sometimes fail.
Work around this by using a custom target that the builtin targets depend on.
This causes any sub-invocations to depend on the symlinks having been created before.
Mailing list thread: https://lists.llvm.org/pipermail/llvm-dev/2021-July/151822.html
Reviewed By: thakis, steven_wu
Differential Revision: https://reviews.llvm.org/D106305
This is a second attempt at D101497, which landed as
9a9bc76c0e but had to be reverted in
8cf7ddbdd4.
This issue was that in the case that `COMPILER_RT_INSTALL_PATH` is
empty, expressions like "${COMPILER_RT_INSTALL_PATH}/bin" evaluated to
"/bin" not "bin" as intended and as was originally.
One solution is to make `COMPILER_RT_INSTALL_PATH` always non-empty,
defaulting it to `CMAKE_INSTALL_PREFIX`. D99636 adopted that approach.
But, I think it is more ergonomic to allow those project-specific paths
to be relative the global ones. Also, making install paths absolute by
default inhibits the proper behavior of functions like
`GNUInstallDirs_get_absolute_install_dir` which make relative install
paths absolute in a more complicated way.
Given all this, I will define a function like the one asked for in
https://gitlab.kitware.com/cmake/cmake/-/issues/19568 (and needed for a
similar use-case).
---
Original message:
Instead of using `COMPILER_RT_INSTALL_PATH` through the CMake for
complier-rt, just use it to define variables for the subdirs which
themselves are used.
This preserves compatibility, but later on we might consider getting rid
of `COMPILER_RT_INSTALL_PATH` and just changing the defaults for the
subdir variables directly.
---
There was a seaming bug where the (non-Apple) per-target libdir was
`${target}` not `lib/${target}`. I suspect that has to do with the docs
on `COMPILER_RT_INSTALL_PATH` saying was the library dir when that's no
longer true, so I just went ahead and fixed it, allowing me to define
fewer and more sensible variables.
That last part should be the only behavior changes; everything else
should be a pure refactoring.
---
I added some documentation of these variables too. In particular, I
wanted to highlight the gotcha where `-DSomeCachePath=...` without the
`:PATH` will lead CMake to make the path absolute. See [1] for
discussion of the problem, and [2] for the brief official documentation
they added as a result.
[1]: https://cmake.org/pipermail/cmake/2015-March/060204.html
[2]: https://cmake.org/cmake/help/latest/manual/cmake.1.html#options
In 38b2dec37e the problem was somewhat
misidentified and so `:STRING` was used, but `:PATH` is better as it
sets the correct type from the get-go.
---
D99484 is the main thrust of the `GnuInstallDirs` work. Once this lands,
it should be feasible to follow both of these up with a simple patch for
compiler-rt analogous to the one for libcxx.
Reviewed By: phosek, #libc_abi, #libunwind
Differential Revision: https://reviews.llvm.org/D105765
This reverts commit 9a9bc76c0e.
That commit broke "ninja install" when building compiler-rt for mingw
targets, building standalone (pointing cmake at the compiler-rt
directory) with cmake 3.16.3 (the one shipped in ubuntu 20.04), with
errors like this:
-- Install configuration: "Release"
CMake Error at cmake_install.cmake:44 (file):
file cannot create directory: /include/sanitizer. Maybe need
administrative privileges.
Call Stack (most recent call first):
/home/martin/code/llvm-mingw/src/llvm-project/compiler-rt/build-i686-sanitizers/cmake_install.cmake:37 (include)
FAILED: include/CMakeFiles/install-compiler-rt-headers
cd /home/martin/code/llvm-mingw/src/llvm-project/compiler-rt/build-i686-sanitizers/include && /usr/bin/cmake -DCMAKE_INSTALL_COMPONENT="compiler-rt-headers" -P /home/martin/code/llvm-mingw/src/llvm-project/compiler-rt/build-i686-sanitizers/cmake_install.cmake
ninja: build stopped: subcommand failed.
Instead of using `COMPILER_RT_INSTALL_PATH` through the CMake for
complier-rt, just use it to define variables for the subdirs which
themselves are used.
This preserves compatibility, but later on we might consider getting rid
of `COMPILER_RT_INSTALL_PATH` and just changing the defaults for the
subdir variables directly.
---
There was a seaming bug where the (non-Apple) per-target libdir was
`${target}` not `lib/${target}`. I suspect that has to do with the docs
on `COMPILER_RT_INSTALL_PATH` saying was the library dir when that's no
longer true, so I just went ahead and fixed it, allowing me to define
fewer and more sensible variables.
That last part should be the only behavior changes; everything else
should be a pure refactoring.
---
D99484 is the main thrust of the `GnuInstallDirs` work. Once this lands,
it should be feasible to follow both of these up with a simple patch for
compiler-rt analogous to the one for libcxx.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D101497
Install libatomic.a in top level library directory so that compiler can find it in search directories.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D104908
This reverts commit 21c008d5a5 since
it broke the build on macOS and Windows with the following error:
The install of the clang_rt.<na,e> target requires changing an
RPATH from the build tree, but this is not supported with the Ninja
generator unless on an ELF-based platform. The
CMAKE_BUILD_WITH_INSTALL_RPATH variable may be set to avoid this relinking
step.
cmake-3.16+ for AIX changes the default behavior of building a `SHARED` library which breaks AIX's build of libatomic, i.e., cmake-3.16+ builds `SHARED` as an archive of dynamic libraries. To fix it, we have to build `libatomic.so.1` as `MODULE` which keeps `libatomic.so.1` as an normal dynamic library.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D103786
Currently, the compiler-rt build system checks only whether __X86_64
is defined to determine whether the default compiler-rt target arch
is x86_64. Since x32 defines __X86_64 as well, we must also check that
the default pointer size is eight bytes and not four bytes to properly
detect a 64-bit x86_64 compiler-rt default target arch.
Reviewed By: hvdijk, vitalybuka
Differential Revision: https://reviews.llvm.org/D99988
Adds extra supported architectures that were available for vanilla
scudo, in preparation for D102543. Hopefully the dust has settled and
7d0a81ca38 is no longer an issue.
Reviewed By: cryptoad, vitalybuka
Differential Revision: https://reviews.llvm.org/D102648
On AIX, we have to ship `libatomic.a` for compatibility. First, a new `clang_rt.atomic` is added. Second, use added cmake modules for AIX, we are able to build a compatible libatomic.a for AIX. The second step can't be perfectly implemented with cmake now since AIX's archive approach is kinda unique, i.e., archiving shared libraries into a static archive file.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D102155
Add unit test infrastructure for the ORC runtime, plus a cut-down
extensible_rtti system and extensible_rtti unit test.
Removes the placeholder.cpp source file.
Differential Revision: https://reviews.llvm.org/D102080
Rename `check_linker_flag` in compiler_rt to avoid conflict. Follow up
as the fix in D100901.
Patched by radford.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101581
ZijunZhao