r361845 changed the way we handle "D16" vs. "D32" targets; there used to
be a negative "d16" which removed instructions from the instruction set,
and now there's a "d32" feature which adds instructions to the
instruction set. This is good, but there was an oversight in the
implementation: the behavior of VFPv2 was changed. In particular, the
"vfp2" feature was changed to imply "d32". This is wrong: VFPv2 only
supports 16 D registers.
In practice, this means if you specify -mfpu=vfpv2, the compiler will
generate illegal instructions.
This patch gets rid of "vfp2d16" and "vfp2d16sp", and fixes "vfp2" and
"vfp2sp" so they don't imply "d32".
Differential Revision: https://reviews.llvm.org/D67375
llvm-svn: 372186
This is the main CodeGen patch to support the arm64_32 watchOS ABI in LLVM.
FastISel is mostly disabled for now since it would generate incorrect code for
ILP32.
llvm-svn: 371722
Summary:
Now that llvm-objdump allows target-specific options, we match the
`no-aliases` and `numeric` options for RISC-V, as supported by GNU objdump.
This is done by overriding the variables used for the command-line options, so
that the command-line options are still supported.
This patch updates all tests using `llvm-objdump -riscv-no-aliases` to use
`llvm-objdump -M no-aliases`.
Reviewers: luismarques, asb
Reviewed By: luismarques, asb
Subscribers: pzheng, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66139
llvm-svn: 371534
Summary:
This is an option primarily to use during testing. Instead of always
printing registers using their ABI names, this allows a user to request they
are printed with their architectural name.
This is then used in the register constraint tests to ensure the mapping
between architectural and abi names is correct.
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: pzheng, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65950
llvm-svn: 371531
microMIPS jump and link exchange instruction stores a target in a
26-bits field. Despite other microMIPS JAL instructions these bits
are target address shifted right 2 bits [1]. The patch fixes the
JALX instruction decoding and uses 2-bit shift.
[1] MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set
Differential Revision: https://reviews.llvm.org/D67320
llvm-svn: 371428
The family of 'dual-accumulating' vector multiply-add instructions
(VMLADAV, VMLALDAV and VRMLALDAVH) can all operate on both signed and
unsigned integer types, and they all have an 'exchange' variant (with
an X in the name) that modifies which pairs of vector lanes in the two
inputs are multiplied together. But there's a clause in the spec that
says that the X variants //don't// operate on unsigned integer types,
only signed. You can have X, or unsigned, or neither, but not both.
We didn't notice that clause when we implemented the MC support for
these instructions, so LLVM believes that things like VMLADAVX.U8 do
exist, contradicting the spec. Here I fix that by conditioning them
out in Tablegen.
In order to do that, I've reversed the nesting order of the Tablegen
multiclasses for those instructions. Previously, the innermost
multiclass generated the X and not-X variants, and the one outside
that generated the A and not-A variants. Now X is done by the outer
multiclass, which allows me to bypass that one when I only want the
two not-X variants.
Changing the multiclass nesting order also changes the names of the
instruction ids unless I make a special effort not to. I decided that
while I was changing them anyway I'd make them look nicer; so now the
instructions have names like MVE_VMLADAVs32 or MVE_VMLADAVaxs32,
instead of cumbersome _noacc_noexch suffixes.
The corresponding multiply-subtract instructions are unaffected. Those
don't accept unsigned types at all, either in the spec or in LLVM.
Reviewers: ostannard, dmgreen
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67214
llvm-svn: 371405
Specify the Unpredictable bits, and return softfails when appropriate.
Patch by Mark Murray!
Differential revision: https://reviews.llvm.org/D66939
llvm-svn: 371374
```
.type foo,@gnu_indirect_function
.set foo,foo_resolver
.set foo2,foo
.set foo3,foo2
```
The types of foo2 and foo3 should be STT_GNU_IFUNC, but we currently
resolve them to the type of foo_resolver. This patch fixes it.
Differential Revision: https://reviews.llvm.org/D67206
Patch by Senran Zhang
llvm-svn: 371312
These flags should simply be passed through to the target, which will do
the right thing. Add an MC/X86 test that uses these directives with the
three primary object file formats and shows that they disassemble the
same everywhere.
There is a missing test for .code32 on Windows ARM, since I'm not sure
exactly how to construct one.
Fixes PR43203
llvm-svn: 370805
The code here seems to date back to r134705, when tablegen lowering was first
being added. I don't believe that we need to include CPSR implicit operands on
the MCInst. This now works more like other backends (like AArch64), where all
implicit registers are skipped.
This allows the AliasInst for CSEL's to match correctly, as can be seen in the
test changes.
Differential revision: https://reviews.llvm.org/D66703
llvm-svn: 370745
Decoding of VMSR doesn't diagnose some unpredictable encodings, as the unpredictable bits are not correctly set.
Diff-reduce this instruction's internals WRT VMRS so I can see the differences better. Mostly this is s/src/Rt/g.
Fill in the "should-be-(0)" bits.
Designate the Unpredictable{} bits for both VMRS and VMSR.
Patch by Mark Murray!
Differential revision: https://reviews.llvm.org/D66938
llvm-svn: 370729
Summary:
Adds clang builtins and LLVM intrinsics for these experimental
instructions. They are not implemented in engines yet, but that is ok
because the user must opt into using them by calling the builtins.
Reviewers: aheejin, dschuff
Reviewed By: aheejin
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D67020
llvm-svn: 370556
Also improve assembler parser register validation for .seh_ directives.
This requires moving X86-specific seh directive handling into the x86
backend, which addresses some assembler FIXMEs.
Differential Revision: https://reviews.llvm.org/D66625
llvm-svn: 370533
Add an WASM_SYMBOL_NO_STRIP flag, so that __attribute__((used)) doesn't
need to imply exporting. When targeting Emscripten, have
WASM_SYMBOL_NO_STRIP imply exporting.
Differential Revision: https://reviews.llvm.org/D62542
llvm-svn: 370415
Summary:
Reported in https://github.com/opencv/opencv/issues/15413.
We have serveral extended mnemonics for Move To/From Vector-Scalar Register Instructions
eg: mffprd,mtfprd etc.
We only support one of them, this patch add the others.
Reviewers: nemanjai, steven.zhang, hfinkel, #powerpc
Reviewed By: hfinkel
Subscribers: wuzish, qcolombet, hiraditya, kbarton, MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66963
llvm-svn: 370411
Summary:
There is no reason to differ in assembler behavior here between -msvc
and -gnu targets. Without this setting, the text after the '@' is
interpreted as a symbol variable, like foo@IMGREL.
Reviewers: mstorsjo
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66974
llvm-svn: 370408
When a "base" in the `lw/sw $reg1, symbol($reg2)` instruction is
a register and generated code is position independent, backend
does not add the "base" value to the symbol address.
```
lw $reg1, %got(symbol)($gp)
lw/sw $reg1, 0($reg1)
```
This patch fixes the bug and adds the missed `addu` instruction by
passing `BaseReg` into the `loadAndAddSymbolAddress` routine and handles
the case when the `BaseReg` is the zero register to escape redundant
`move reg, reg` instruction:
```
lw $reg1, %got(symbol)($gp)
addu $reg1, $reg1, $reg2
lw/sw $reg1, 0($reg1)
```
Differential Revision: https://reviews.llvm.org/D66894
llvm-svn: 370353
Stop counting explicitly disabled user_spgr's in the user_sgpr_count field of the kernel descriptor.
Differential Revision: https://reviews.llvm.org/D66900
llvm-svn: 370250
Now `lw/sw $reg, sym+offset` pseudo instructions for global symbol `sym`
are lowering into the following three instructions.
```
lw $reg, %got(symbol)($gp)
addiu $reg, $reg, offset
lw/sw $reg, 0($reg)
```
It's possible to reduce the number of instructions by taking the offset
in account in the final `lw/sw` command. This patch implements that
optimization.
```
lw $reg, %got(symbol)($gp)
lw/sw $reg, offset($reg)
```
Differential Revision: https://reviews.llvm.org/D66553
llvm-svn: 369756
Now pseudo instruction `la $6, symbol+8($6)` is expanding into the following
chain of commands:
```
lw $1, %got(symbol+8)($gp)
addiu $1, $1, 8
addu $6, $1, $6
```
This is incorrect. When a linker handles the `R_MIPS_GOT16` relocation,
it does not expect to get any addend and breaks on assertion. Otherwise
it has to create new GOT entry for each unique "sym + offset" pair.
Offset for a global symbol should be added to result of loading GOT
entry by a separate `add` command.
The patch fixes the problem by stripping off an offset from the expression
passed to the `%got`. That's interesting that even current code inserts
a separate `add` command.
Differential Revision: https://reviews.llvm.org/D66552
llvm-svn: 369755
Local symbols in the indirect symbol table contain the value
`INDIRECT_SYMBOL_LOCAL` and the corresponding __pointers entry must
contain the address of the target.
In r349060, I added support for local symbols in the indirect symbol
table, which was checking if the symbol `isDefined` && `!isExternal` to
determine if the symbol is local or not.
It turns out that `isDefined` will return false if the user of the
symbol comes before its definition, and we'll again generate .long 0
which will be the symbol at the adress 0x0.
Instead of doing that, use GlobalValue::hasLocalLinkage() to check if
the symbol is local.
Differential Revision: https://reviews.llvm.org/D66563
llvm-svn: 369671
The hint instructions are enabled by default (if the standard C extension is
enabled). To disable them pass -mattr=-rvc-hints.
Differential Revision: https://reviews.llvm.org/D62592
llvm-svn: 369528
Follow binutils in using RISCV_32_PCREL for the FDE initial location. As
explained in the relevant binutils commit
<a6cbf936e3>,
the ADD/SUB pair of relocations is problematic in the presence of linker
relaxation.
This patch has the same end goal as D64715 but includes test changes and
avoids adding a new global VariantKind to MCExpr.h (preferring
RISCVMCExpr VKs like the rest of the RISC-V backend).
Differential Revision: https://reviews.llvm.org/D66419
llvm-svn: 369375
WebAssembly doesn't support PC relative relocation or relocation
expressions that can't be reduced to single symbol.
The only support for we have for fixups involving two symbols are when
both symbols are defined and withing the same section. In this case
evaluateFixup will already have evaluated to the expression before
calling recordRelocation.
llvm-svn: 369317
The current behavior of shouldForceRelocation forces relocations for the
majority of fixups when relaxation is enabled. This makes sense for
fixups which incorporate symbols but is unnecessary for simple data
fixups where the fixup target is already resolved to an absolute value.
Differential Revision: https://reviews.llvm.org/D63404
Patch by Edward Jones.
llvm-svn: 369257
Replace
- error: No relocation available to represent this relative expression
with
+ error: symbol 'undef' can not be undefined in a subtraction expression
or
+ error: Cannot represent a difference across sections
Keep !IsPcRel as an assertion after the two diagnostic checks are done.
llvm-svn: 369239
GNU as keeps the original symbol in the symbol table for defined @ and
@@, but suppresses it in other cases (@@@ or undefined). The original
symbol is usually undesired:
In a shared object, the original symbol can be localized with a version
script, but it is hard to remove/localize in an archive:
1) a post-processing step removes the undesired original symbol
2) consumers (executable) of the archive are built with the
version script
Moreover, it can cause linker issues like binutils PR/18703 if the
original symbol name and the base name of the versioned symbol is the
same (both ld.bfd and gold have some code to work around defined @ and
@@). In lld, if it sees f and f@v1:
--version-script =(printf 'v1 {};') => f and f@v1
--version-script =(printf 'v1 { f; };') => f@v1 and f@@v1
It can be argued that @@@ added on 2000-11-13 corrected the @ and @@ mistake.
This patch catches some more multiple version errors (defined @ and @@),
and consistently suppress the original symbol. This addresses all the
problems listed above.
If the user wants other aliases to the versioned symbol, they can copy
the original symbol to other symbol names with .set directive, e.g.
.symver f, f@v1 # emit f@v1 but not f into .symtab
.set f_impl, f # emit f_impl into .symtab
llvm-svn: 369233
This patch allows symbols followed by an expression for an offset to be
parsed as bare symbols.
Differential Revision: https://reviews.llvm.org/D57332
llvm-svn: 369097
Function MipsAsmParser::expandMemInst() did not properly handle
instruction `sc` with a symbol as an argument because first argument
would be counted twice. We add additional checks and handle this case
separately.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D64252
llvm-svn: 368160
We have aliases that disambiguate memory forms of bt/btc/btr/bts
without suffixes to the 32-bit form. These aliases should have
been updated when the instructions were updated in r356413.
llvm-svn: 368127
The upper 4 bits of the immediate byte are used to encode a
register. We need to limit the explicit immediate to fit in the
remaining 4 bits.
Fixes PR42899.
llvm-svn: 368123
A TYPE_INDEX operand (as used by call_indirect) used to be represented
by the InstPrinter as a symbol (e.g. .Ltype_index0@TYPE_INDEX) which
was a bit of a mismatch with the WasmObjectWriter which expects an
unnamed symbol, to receive the signature from and then turn into a
reloc.
There was really no good way to round-trip this information. An earlier
version of this patch tried to attach the signature information using
a .functype, but that ran into trouble when the symbol was re-emitted
without a name. Removing the name was a giant hack also.
The current version changes the assembly syntax to have an inline
signature spec for TYPEINDEX operands that is always unnamed, which
is much more elegant both in syntax and in implementation (as now the
assembler is able to follow the same path as the regular backend)
Reviewers: sbc100, dschuff, aheejin, jgravelle-google, sunfish, tlively
Subscribers: arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64758
llvm-svn: 367590
If an operand of the `lw/sw` instructions is a symbol, these instructions
incorrectly lowered using not-position-independent chain of commands.
For PIC code we should use `lw/addiu` instructions with the `R_MIPS_GOT16`
and `R_MIPS_LO16` relocations respectively. Instead of that LLVM generates
position dependent code with the `R_MIPS_HI16` and `R_MIPS_LO16`
relocations.
This patch provides a fix for the bug by handling PIC case separately in
the `MipsAsmParser::expandMemInst`. The main idea is to generate a chain
of PIC instructions to load a symbol address into a register and then
load the address content.
The fix is not optimal and does not fix all PIC-related problems. This
is a task for subsequent patches.
Differential Revision: https://reviews.llvm.org/D65524
llvm-svn: 367580
Summary:
GCC Accepts both (reg) and 0(reg) for atomic instruction memory
operands. These instructions do not allow for an offset in their
encoding, so in the latter case, the 0 is silently dropped.
Due to how we have structured the RISCVAsmParser, the easiest way to add
support for parsing this offset is to add a custom AsmOperand and
parser. This parser drops all the parens, and just keeps the register.
This commit also adds a custom printer for these operands, which matches
the GCC canonical printer, printing both `(a0)` and `0(a0)` as `(a0)`.
Reviewers: asb, lewis-revill
Reviewed By: asb
Subscribers: s.egerton, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, jfb, PkmX, jocewei, psnobl, benna, Jim, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65205
llvm-svn: 367553
Summary:
According to the Armv8.1-M manual CSEL, CSINC, CSINV and CSNEG are
"constrained unpredictable" when SP is used as the source register Rn.
The assembler should diagnose this case.
Reviewers: momchil.velikov, dmgreen, ostannard, simon_tatham, t.p.northover
Reviewed By: ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65505
llvm-svn: 367433
These tests have been disabled on Linux and Windows due to failing
there. I think that could be down to a race condition between stdout
and stderr, so I have disabled output to stdout.
For the moment, only re-enable on linux, because I don't have a windows
machine to test on.
llvm-svn: 367311
Because they fail there too.
FAIL: LLVM :: MC/RISCV/rv32i-aliases-invalid.s (24397 of 32659)
******************** TEST 'LLVM :: MC/RISCV/rv32i-aliases-invalid.s' FAILED ********************
Script:
--
: 'RUN: at line 2'; not c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s -triple=riscv32 -riscv-no-aliases 2>&1 | c:\src\llvm.monorepo\build.release2\bin\filecheck.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s
: 'RUN: at line 3'; not c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s -triple=riscv32 2>&1 | c:\src\llvm.monorepo\build.release2\bin\filecheck.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s
--
Exit Code: 1
Command Output (stdout):
--
$ ":" "RUN: at line 2"
$ "not" "c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe" "C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s" "-triple=riscv32" "-riscv-no-aliases"
$ "c:\src\llvm.monorepo\build.release2\bin\filecheck.exe" "C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s"
C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv32i-aliases-invalid.s:10:21: error: CHECK: expected string not found in input
li t4, foo # CHECK: :[[@LINE]]:8: error: immediate must be an integer in the range [-2147483648, 4294967295]
^
<stdin>:5:1: note: scanning from here
li x0, -2147483649 # CHECK: :[[@LINE]]:8: error: immediate must be an integer in the range [-2147483648, 4294967295]
^
<stdin>:5:1: note: with "@LINE" equal to "10"
li x0, -2147483649 # CHECK: :[[@LINE]]:8: error: immediate must be an integer in the range [-2147483648, 4294967295]
^
<stdin>:5:38: note: possible intended match here
li x0, -2147483649 # CHECK: :[[@LINE]]:8: error: immediate must be an integer in the range [-2147483648, 4294967295]
^
error: command failed with exit status: 1
--
--
********************
Testing: 0 .. 10.. 20.. 30.. 40.. 50.. 60.. 70
FAIL: LLVM :: MC/RISCV/rv64i-aliases-invalid.s (24416 of 32659)
******************** TEST 'LLVM :: MC/RISCV/rv64i-aliases-invalid.s' FAILED ********************
Script:
--
: 'RUN: at line 2'; not c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s -triple=riscv64 -riscv-no-aliases 2>&1 | c:\src\llvm.monorepo\build.release2\bin\filecheck.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s
: 'RUN: at line 3'; not c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s -triple=riscv64 2>&1 | c:\src\llvm.monorepo\build.release2\bin\filecheck.exe C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s
--
Exit Code: 1
Command Output (stdout):
--
$ ":" "RUN: at line 2"
$ "not" "c:\src\llvm.monorepo\build.release2\bin\llvm-mc.exe" "C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s" "-triple=riscv64" "-riscv-no-aliases"
$ "c:\src\llvm.monorepo\build.release2\bin\filecheck.exe" "C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s"
C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s:6:21: error: CHECK: expected string not found in input
li t4, foo # CHECK: :[[@LINE]]:8: error: operand must be a constant 64-bit integer
^
<stdin>:2:1: note: scanning from here
li t5, 0x10000000000000000 # CHECK: :[[@LINE]]:8: error: unknown operand
^
<stdin>:2:1: note: with "@LINE" equal to "6"
li t5, 0x10000000000000000 # CHECK: :[[@LINE]]:8: error: unknown operand
^
<stdin>:13:67: note: possible intended match here
C:\src\llvm.monorepo\llvm\test\MC\RISCV\rv64i-aliases-invalid.s:12:13: error: immediate must be an integer in the range [0, 63]
^
error: command failed with exit status: 1
llvm-svn: 367215
Summary:
The bitperm feature flag is now prefixed with SVE2, as it is for all other SVE2
extensions
Patch by Maciej Gabka.
Reviewers: sdesmalen, rovka, chill, SjoerdMeijer, rengolin
Reviewed By: SjoerdMeijer, rengolin
Differential Revision: https://reviews.llvm.org/D65327
llvm-svn: 367124
Embedded Trace Extension and Trace Buffer Extension are optional
future architecture extensions.
(cf. https://developer.arm.com/architectures/cpu-architecture/a-profile/exploration-tools)
Their system registers are documented here:
https://developer.arm.com/docs/ddi0601/a
ETE shares register names with ETM. One exception is the ETE
TRCEXTINSELR0 register, which has the same encoding as the ETM
TRCEXTINSELR register (but different semantics). This patch treats
them as aliases: the assembler will accept both names, emitting
identical encoding, and the disassembler will keep disassembling
to TRCEXRINSELR.
Differential Revision: https://reviews.llvm.org/D63707
llvm-svn: 367093
... for the vector forms of `{SQ,UQ,}{INC,DEC}P` instructions. Also continue
supporting the exsting behaviour of not requiring an explicit size
specifier. The preferred disasembly is *with* the specifier.
This is implemented by redefining intruction forms to require vector predicates
with explicit size and adding aliases, which allow a predicate with no size.
Differential Revision: https://reviews.llvm.org/D65145
llvm-svn: 367019
We were getting test failures on some builders, which pointed to @LINE
being an undefined variable. I think that these failures should have
been fixed by https://reviews.llvm.org/rL366434, so I'm re-enabling the
test.
llvm-svn: 366797
This reverts commit r366686 as it appears to be causing buildbot
failures on sanitizer-x86_64-linux-android and sanitizer-x86_64-linux.
llvm-svn: 366708
This patch was not the reason of the buildbot failure.
Deleted code was introduced as a work around for a bug in the gold linker
(http://sourceware.org/PR16794). Test case that was given as a reason for
this part of code, the one on previous link, now works for the gold.
This condition is too strict and when a code is compiled with debug info
it forces generation of numerous relocations with symbol for architectures
that do not have relocation addend.
Reviewers: arsenm, espindola
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D64327
llvm-svn: 366686
Summary:
According to the new Armv8-M specification
https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf the
instructions SQRSHRL and UQRSHLL now have an additional immediate
operand <saturate>. The new assembly syntax is:
SQRSHRL<c> RdaLo, RdaHi, #<saturate>, Rm
UQRSHLL<c> RdaLo, RdaHi, #<saturate>, Rm
where <saturate> can be either 64 (the existing behavior) or 48, in
that case the result is saturated to 48 bits.
The new operand is encoded as follows:
#64 Encoded as sat = 0
#48 Encoded as sat = 1
sat is bit 7 of the instruction bit pattern.
This patch adds a new assembler operand class MveSaturateOperand which
implements parsing and encoding. Decoding is implemented in
DecodeMVEOverlappingLongShift.
Reviewers: ostannard, simon_tatham, t.p.northover, samparker, dmgreen, SjoerdMeijer
Reviewed By: simon_tatham
Subscribers: javed.absar, kristof.beyls, hiraditya, pbarrio, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64810
llvm-svn: 366555
In debug frame information, some fields, e.g., Length in CIE/FDE and
Offset in FDE are attributes to describe the structure of CIE/FDE. They
are not related to the relaxed code. However, these attributes are
symbol differences. So, in current design, these attributes will be
filled as zero and LLVM generates relocations for them.
We only need to generate relocations for symbols in executable sections.
So, if the symbols are not located in executable sections, we still
evaluate their values under relaxation.
Differential Revision: https://reviews.llvm.org/D61584
llvm-svn: 366531
There doesn't seem to be a practical reason for these instructions to have
different restrictions on the types of relocations that they may be used
with, notwithstanding the language in the ELF AArch64 spec that implies that
specific relocations are meant to be used with specific instructions.
For example, we currently forbid the first instruction in the following
sequence, despite it currently being used by clang to generate a global
reference under -mcmodel=large:
movz x0, #:abs_g0_nc:foo
movk x0, #:abs_g1_nc:foo
movk x0, #:abs_g2_nc:foo
movk x0, #:abs_g3:foo
Therefore, allow MOVK/MOVN/MOVZ to accept the union of the set of relocations
that they currently accept individually.
Differential Revision: https://reviews.llvm.org/D64466
llvm-svn: 366461
It is necessary to generate fixups in .debug_frame or .eh_frame as
relaxation is enabled due to the address delta may be changed after
relaxation.
There is an opcode with 6-bits data in debug frame encoding. So, we
also need 6-bits fixup types.
Differential Revision: https://reviews.llvm.org/D58335
llvm-svn: 366442
This directive forces to use the alternate register for context pointer.
For example, this code:
.cplocal $4
jal foo
expands to:
ld $25, %call16(foo)($4)
jalr $25
Differential Revision: https://reviews.llvm.org/D64743
llvm-svn: 366300
The canonical GNU form of JALR resembles a load/store instruction rather
than placing the immediate offset as a separate argument, so match this
behaviour. Also add parser-only aliases for the three-operand form, and
add other shorter aliases also emitted by GNU tools.
Differential Revision: https://reviews.llvm.org/D55277
Patch by James Clarke.
llvm-svn: 366179
RISCVAsmBackend::shouldInsertExtraNopBytesForCodeAlign() assumed that the
align specified would be greater than or equal to the minimum nop length, but
that is not always the case - for example if a user specifies ".align 0" in
assembly.
Differential Revision: https://reviews.llvm.org/D63274
Patch by Edward Jones.
llvm-svn: 366176
Summary:
We agreed to rename `except_ref` to `exnref` for consistency with other
reference types in
https://github.com/WebAssembly/exception-handling/issues/79. This also
renames WebAssemblyInstrExceptRef.td to WebAssemblyInstrRef.td in order
to use the file for other reference types in future.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64703
llvm-svn: 366145
Summary:
These are emitted as identifiers by the InstPrinter, so we should
parse them as such. These could potentially clash with symbols of
the same name, but that is out of our (the WebAssembly backend) control.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64770
llvm-svn: 366139
assembly command
'macCatalyst' is more readable than 'maccatalyst'. I renamed the objdump output,
but the assembly should match it as well.
llvm-svn: 365964
This patch series adds support for the next-generation arch13
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Assembler/disassembler support for new instructions.
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of arch13 as host processor.
Note: No currently available Z system supports the arch13
architecture. Once new systems become available, the
official system name will be added as supported -march name.
llvm-svn: 365932
Summary:
Useful for jumps, such as `j .`.
I am not sure who should review this. Do not hesitate to change the reviewers if needed.
Reviewers: asb, jrtc27, lenary
Reviewed By: lenary
Subscribers: MaskRay, lenary, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63669
Patch by John LLVM (JohnLLVM)
llvm-svn: 365881
The VQDMLAH.U8, VQDMLAH.U16 and VQDMLAH.U32 instructions don't
actually exist: the Armv8.1-M architecture spec only lists signed
forms of that instruction. The unsigned ones were added in error: they
existed in an early draft of the spec, but they were removed before
the public version, and we missed that particular spec change.
Also affects the variant forms VQDMLASH, VQRDMLAH and VQRDMLASH.
Reviewers: miyuki
Subscribers: javed.absar, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64502
llvm-svn: 365747
Deleted code was introduced as a work around for a bug in the gold linker
(http://sourceware.org/PR16794). Test case that was given as a reason for
this part of code, the one on previous link, now works for the gold.
This condition is too strict and when a code is compiled with debug info
it forces generation of numerous relocations with symbol for architectures
that do not have relocation addend.
Reviewers: arsenm, espindola
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D64327
llvm-svn: 365618
Summary:
Use the same predicates as VSTMDB/VLDMIA since VPUSH/VPOP alias to
these.
Patch by Momchil Velikov.
Reviewers: ostannard, simon_tatham, SjoerdMeijer, samparker, t.p.northover, dmgreen
Reviewed By: dmgreen
Subscribers: javed.absar, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64413
llvm-svn: 365604
The `sge/sgeu Dst, Src1, Src2/Imm` pseudo instructions set register
`Dst` to 1 if register `Src1` is greater than or equal `Src2/Imm` and
to 0 otherwise.
Differential Revision: https://reviews.llvm.org/D64314
llvm-svn: 365476
The `sgt/sgtu Dst, Src1, Src2/Imm` pseudo instructions set register
`Dst` to 1 if register `Src1` is greater than `Src2/Imm` and to 0 otherwise.
Differential Revision: https://reviews.llvm.org/D64313
llvm-svn: 365475
Summary:
Before, they were one category of operands which could cause
crashes in non-sensical combinations, e.g. "f32.const symbol".
Now these are forced to be an error.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64039
llvm-svn: 365351
Summary of changes:
- simplified handling of FLAT offset: offset_s13 and offset_u12 have been replaced with flat_offset;
- provided information about error position for pre-gfx9 targets;
- improved errors handling.
Reviewers: artem.tamazov, arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D64244
llvm-svn: 365321
Summary:
According to a recently updated Armv8-M spec
(https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf) the
32-bit width versions of the following instructions:
* VQDMLADH
* VQDMLADHX
* VQRDMLADH
* VQRDMLADHX
* VQDMLSDH
* VQDMLSDHX
* VQRDMLSDH
* VQRDMLSDHX
are no longer unpredictable when their output register is the same as
one of the input registers.
This patch updates the assembler parser and the corresponding tests
and also removes @earlyclobber from the instruction constraints.
Reviewers: simon_tatham, ostannard, dmgreen, SjoerdMeijer, samparker
Reviewed By: simon_tatham
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64250
llvm-svn: 365306
Mac Catalyst is a new MachO platform in macOS Catalina.
It always uses the build_version MachO load command.
Differential Revision: https://reviews.llvm.org/D64107
llvm-svn: 364981
Summary:
These are output by clang -S, so can now be roundtripped thru clang.
(partially) fixes: https://bugs.llvm.org/show_bug.cgi?id=34544
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63901
llvm-svn: 364658
Summary:
Assembly of atomic.notify has been fixed in r364576, so we can enable
it.
Reviewers: aardappel
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63898
llvm-svn: 364596
Summary:
- Match the syntax output by InstPrinter.
- Fix it always emitting 0 for align. Had to work around fact that
opcode is not available for GetDefaultP2Align while parsing.
- Updated tests that were erroneously happy with a p2align=0
Fixes https://bugs.llvm.org/show_bug.cgi?id=40752
Reviewers: aheejin, sbc100
Subscribers: jgravelle-google, sunfish, jfb, llvm-commits, dschuff
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63633
llvm-svn: 364570
This was reported in https://bugs.llvm.org/show_bug.cgi?id=41751
llvm-mc aborted when disassembling tabortdc.
This patch try to clean up TM related DAGs.
* Fixes the problem by remove explicit output of cr0, and put it as implicit def.
* Update int_ppc_tbegin pattern to accommodate the implicit def of cr0.
* Update the TCHECK operand and int_ppc_tcheck accordingly.
* Add some builtin test and disassembly tests.
* Remove unused CRRC0/crrc0
Differential Revision: https://reviews.llvm.org/D61935
llvm-svn: 364544
The BF and WLS/WLSTP instructions have various branch-offset fields
occupying different positions and lengths in the instruction encoding,
and all of them were decoded at disassembly time by the function
DecodeBFLabelOffset() which returned SoftFail if the offset was zero.
In fact, it's perfectly fine and not even a SoftFail for most of those
offset fields to be zero. The only one that can't be zero is the 4-bit
field labelled `boff` in the architecture spec, occupying bits {26-23}
of the BF instruction family. If that one is zero, the encoding
overlaps other instructions (WLS, DLS, LETP, VCTP), so it ought to be
a full Fail.
Fixed by adding an extra template parameter to DecodeBFLabelOffset
which controls whether a zero offset is accepted or rejected. Adjusted
existing tests (only in error messages for bad disassemblies); added
extra tests to demonstrate zero offsets being accepted in all the
right places, and a few demonstrating rejection of zero `boff`.
Reviewers: DavidSpickett, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63864
llvm-svn: 364533
Different versions of the Arm architecture disallow the use of generic
coprocessor instructions like MCR and CDP on different sets of
coprocessors. This commit centralises the check of the coprocessor
number so that it's consistent between assembly and disassembly, and
also updates it for the new restrictions in Arm v8.1-M.
New tests added that check all the coprocessor numbers; old tests
updated, where they used a number that's now become illegal in the
context in question.
Reviewers: DavidSpickett, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63863
llvm-svn: 364532
In the `CSEL Rd,Rm,Rn` instruction family (also including CSINC, CSINV
and CSNEG), the architecture lists it as CONSTRAINED UNPREDICTABLE
(i.e. SoftFail) to use SP in the Rd or Rm slot, but outright illegal
to use it in the Rn slot, not least because some encodings of that
form are used by MVE instructions such as UQRSHLL.
MC was treating all three slots the same, as SoftFail. So the only
reason UQRSHLL was disassembled correctly at all was because the MVE
decode table is separate from the Thumb2 one and takes priority; if
you turned off MVE, then encodings such as `[0x5f,0xea,0x0d,0x83]`
would disassemble as spurious CSELs.
Fixed by inventing another version of the `GPRwithZR` register class,
which disallows SP completely instead of just SoftFailing it.
Reviewers: DavidSpickett, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63862
llvm-svn: 364531
Summary:
This fixes a hardware bug that makes a branch offset of 0x3f unsafe.
This replaces the 32 bit branch with offset 0x3f to a 64 bit
instruction that includes the same 32 bit branch and the encoding
for a s_nop 0 to follow. The relaxer than modifies the offsets
accordingly.
Change-Id: I10b7aed99d651f8159401b01bb421f105fa6288e
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63494
llvm-svn: 364451
Summary:
Implements direct and indirect tail calls enabled by the 'tail-call'
feature in both DAG ISel and FastISel. Updates existing call tests and
adds new tests including a binary encoding test.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62877
llvm-svn: 364445
Summary:
The getFixupKindContainerSizeBytes function returns the size of the
instruction containing a given fixup. Currently fixup_arm_pcrel_9 is
not handled in this function, this causes an assertion failure in
the debug build and incorrect codegen in the release build.
This patch fixes the problem.
Reviewers: ostannard, simon_tatham
Reviewed By: ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, pbarrio, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63778
llvm-svn: 364404
This patch adds the PseudoCALLReg instruction which allows using an
explicit register operand as the destination for the return address.
GCC can successfully parse this form of the call instruction, which
would be used for calls to functions which do not use ra as the return
address register, such as the __riscv_save libcalls. This patch forms
the first part of an implementation of -msave-restore for RISC-V.
Differential Revision: https://reviews.llvm.org/D62685
llvm-svn: 364403
The weak alias should have the characteristics set to
`IMAGE_EXTERN_WEAK_SEARCH_ALIAS` to indicate that the weak external here
is a symbol alias and that the symbol is aliased to a locally defined
symbol. We were previously setting the characteristics to
`IMAGE_EXTERN_WEAK_SEARCH_LIBRARY` which indicates that the symbol
should be looked for in the libraries.
llvm-svn: 364370
rL364293 committed a couple of lines that just said "// RUN llvm-mc ..."
without the all-important ':' after RUN, so those test lines weren't
actually running anything.
llvm-svn: 364305
Summary:
The directive defines a symbol as an group/local memory (LDS) symbol.
LDS symbols behave similar to common symbols for the purposes of ELF,
using the processor-specific SHN_AMDGPU_LDS as section index.
It is the linker and/or runtime loader's job to "instantiate" LDS symbols
and resolve relocations that reference them.
It is not possible to initialize LDS memory (not even zero-initialize
as for .bss).
We want to be able to link together objects -- starting with relocatable
objects, but possible expanding to shared objects in the future -- that
access LDS memory in a flexible way.
LDS memory is in an address space that is entirely separate from the
address space that contains the program image (code and normal data),
so having program segments for it doesn't really make sense.
Furthermore, we want to be able to compile multiple kernels in a
compilation unit which have disjoint use of LDS memory. In that case,
we may want to place LDS symbols differently for different kernels
to save memory (LDS memory is very limited and physically private to
each kernel invocation), so we can't simply place LDS symbols in a
.lds section.
Hence this solution where LDS symbols always stay undefined.
Change-Id: I08cbc37a7c0c32f53f7b6123aa0afc91dbc1748f
Reviewers: arsenm, rampitec, t-tye, b-sumner, jsjodin
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61493
llvm-svn: 364296
This adds some extra RUN lines to existing test files, to check that
things that worked in previous architecture versions haven't
accidentally stopped working in 8.1-M. Also we add some new tests: a
test of scalar floating point instructions that could be easily
confused with the similar-looking vector ones at assembly time, a test
of basic load/store/move access to the FP registers (which has to work
even in integer-only MVE); and one final check of the really obvious
case where turning off MVE should make sure MVE instructions really
are rejected.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62682
llvm-svn: 364293
This final batch includes the tail-predicated versions of the
low-overhead loop instructions (LETP); the VPSEL instruction to select
between two vector registers based on the predicate mask without
having to open a VPT block; and VPNOT which complements the predicate
mask in place.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62681
llvm-svn: 364292
This adds the rest of the vector memory access instructions. It
includes contiguous loads/stores, with an ordinary addressing mode
such as [r0,#offset] (plus writeback variants); gather loads and
scatter stores with a scalar base address register and a vector of
offsets from it (written [r0,q1] or similar); and gather/scatters with
a vector of base addresses (written [q0,#offset], again with
writeback). Additionally, some of the loads can widen each loaded
value into a larger vector lane, and the corresponding stores narrow
them again.
To implement these, we also have to add the addressing modes they
need. Also, in AsmParser, the `isMem` query function now has
subqueries `isGPRMem` and `isMVEMem`, according to which kind of base
register is used by a given memory access operand.
I've also had to add an extra check in `checkTargetMatchPredicate` in
the AsmParser, without which our last-minute check of `rGPR` register
operands against SP and PC was failing an assertion because Tablegen
had inserted an immediate 0 in place of one of a pair of tied register
operands. (This matches the way the corresponding check for `MCK_rGPR`
in `validateTargetOperandClass` is guarded.) Apparently the MVE load
instructions were the first to have ever triggered this assertion, but
I think only because they were the first to have a combination of the
usual Arm pre/post writeback system and the `rGPR` class in particular.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62680
llvm-svn: 364291
Summary:
The LLVM disassembler assumes that the unused src0 operand of v_nop is
zero. Other tools can put another value in that field, which is still
valid. This commit fixes the LLVM disassembler to recognize such an
encoding as v_nop, in the same way as we already do for s_getpc.
Differential Revision: https://reviews.llvm.org/D63724
Change-Id: Iaf0363eae26ff92fc4ebc716216476adbff37a6f
llvm-svn: 364208
This adds the family of loads and stores with names like VLD20.8 and
VST42.32, which load and store parts of multiple q-registers in such a
way that executing both VLD20 and VLD21, or all four of VLD40..VLD43,
will distribute 2 or 4 vectors' worth of memory data across the lanes
of the same number of registers but in a transposed order.
In addition to the Tablegen descriptions of the instructions
themselves, this patch also adds encode and decode support for the
QQPR and QQQQPR register classes (representing the range of loaded or
stored vector registers), and tweaks to the parsing system for lists
of vector registers to make it return the right format in this case
(since, unlike NEON, MVE regards q-registers as primitive, and not
just an alias for two d-registers).
llvm-svn: 364172
These instructions let you load half a vector register at once from
two general-purpose registers, or vice versa.
The assembly syntax for these instructions mentions the vector
register name twice. For the move _into_ a vector register, the MC
operand list also has to mention the register name twice (once as the
output, and once as an input to represent where the unchanged half of
the output register comes from). So we can conveniently assign one of
the two asm operands to be the output $Qd, and the other $QdSrc, which
avoids confusing the auto-generated AsmMatcher too much. For the move
_from_ a vector register, there's no way to get round the fact that
both instances of that register name have to be inputs, so we need a
custom AsmMatchConverter to avoid generating two separate output MC
operands. (And even that wouldn't have worked if it hadn't been for
D60695.)
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62679
llvm-svn: 364041
This adds the `MVE_qDest_rSrc` superclass and all its instances, plus
a few other instructions that also take a scalar input register or two.
I've also belatedly added custom diagnostic messages to the operand
classes for odd- and even-numbered GPRs, which required matching
changes in two of the existing MVE assembly test files.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62678
llvm-svn: 364040
llvm-mc or clang with -g normally produces debug info describing the
assembler source itself; however, if that source already contains some
.file/.loc directives, we should instead emit the debug info described
by those directives. For certain assembler sources seen in the wild
(particularly in the Chrome build) this was causing a crash due to
incorrect assumptions about legal sequences of assembler source text.
Fixes PR38994.
Differential Revision: https://reviews.llvm.org/D63573
llvm-svn: 364039
Summary:
This adds the `MVE_qDest_qSrc` superclass and all instructions that
inherit from it. It's not the complete class of _everything_ with a
q-register as both destination and source; it's a subset of them that
all have similar encodings (but it would have been hopelessly unwieldy
to call it anything like MVE_111x11100).
This category includes add/sub with carry; long multiplies; halving
multiplies; multiply and accumulate, and some more complex
instructions.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62677
llvm-svn: 364037
Summary:
These take a pair of vector register to compare, and a comparison type
(written in the form of an Arm condition suffix); they output a vector
of booleans in the VPR register, where predication can conveniently
use them.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62676
llvm-svn: 364027
This includes integer arithmetic of various kinds (add/sub/multiply,
saturating and not), and the immediate forms of VMOV and VMVN that
load an immediate into all lanes of a vector.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62674
llvm-svn: 363936
This includes all the obvious bitwise operations (AND, OR, BIC, ORN,
MVN) in register-to-register forms, and the immediate forms of
AND/OR/BIC/ORN; byte-order reverse instructions; and the VMOVs that
access a single lane of a vector.
Some of those VMOVs (specifically, the ones that access a 32-bit lane)
share an encoding with existing instructions that were disassembled as
accessing half of a d-register (e.g. `vmov.32 r0, d1[0]`), but in
8.1-M they're now written as accessing a quarter of a q-register (e.g.
`vmov.32 r0, q0[2]`). The older syntax is still accepted by the
assembler.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62673
llvm-svn: 363838
Vector load/store instructions support an optional alignment field
that the compiler can use to provide known alignment info to the
hardware. If the field is used (and the information is correct),
the hardware may be able (on some models) to perform faster memory
accesses than otherwise.
This patch adds support for alignment hints in the assembler and
disassembler, and fills in known alignment during codegen.
llvm-svn: 363806
This patch allows immediates (and CSR alias immediates) which start with
a tilde token or an exclaim (!) token to be parsed as intended.
Differential Revision: https://reviews.llvm.org/D57320
llvm-svn: 363783
Since the parser attempts to parse an operand as a register with
parentheses before parsing it as an immediate, immediates in
parentheses should not be parsed by parseRegister. However in the case
where the immediate does not start with an identifier, the LParen is not
unlexed and so the RParen causes an unexpected token error.
This patch adds the missing UnLex, and modifies the existing UnLex to
not use a buffered token, as it should always be unlexing an LParen.
Differential Revision: https://reviews.llvm.org/D57319
llvm-svn: 363782
This includes saturating and non-saturating shifts, both with
immediate shift count and with the shift counts given by another
vector register; VSHLC (in which the bits shifted out of each active
vector lane are shifted in to the next active lane); and also VMOVL,
which is enough like an immediate shift that it didn't fit too badly
in this category.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62672
llvm-svn: 363696
Summary:
These form a small family of their own, to go with the floating-point
VMINNM/VMAXNM instructions added in a previous commit.
They introduce the first of many special cases in the mnemonic
recognition code, because VMIN with the E suffix used by the VPT
predication system needs to avoid being interpreted as the nonexistent
instruction 'VMI' with an ordinary 'NE' condition suffix.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62671
llvm-svn: 363695
This is the family of vector instructions that combine all the lanes
in their input vector(s), and output a value in one or two GPRs.
Differential Revision: https://reviews.llvm.org/D62670
llvm-svn: 363403
This commit prepares the way to start adding the main collection of
MVE instructions, which operate on the 128-bit vector registers.
The most obvious thing that's needed, and the simplest, is to add the
MQPR register class, which is like the existing QPR except that it has
fewer registers in it.
The more complicated part: MVE defines a system of vector predication,
in which instructions operating on 128-bit vector registers can be
constrained to operate on only a subset of the lanes, using a system
of prefix instructions similar to the existing Thumb IT, in that you
have one prefix instruction which designates up to 4 following
instructions as subject to predication, and within that sequence, the
predicate can be inverted by means of T/E suffixes ('Then' / 'Else').
To support instructions of this type, we've added two new Tablegen
classes `vpred_n` and `vpred_r` for standard clusters of MC operands
to add to a predicated instruction. Both include a flag indicating how
the instruction is predicated at all (options are T, E and 'not
predicated'), and an input register field for the register controlling
the set of active lanes. They differ from each other in that `vpred_r`
also includes an input operand for the previous value of the output
register, for instructions that leave inactive lanes unchanged.
`vpred_n` lacks that extra operand; it will be used for instructions
that don't preserve inactive lanes in their output register (either
because inactive lanes are zeroed, as the MVE load instructions do, or
because the output register isn't a vector at all).
This commit also adds the family of prefix instructions themselves
(VPT / VPST), and all the machinery needed to work with them in
assembly and disassembly (e.g. generating the 't' and 'e' mnemonic
suffixes on disassembled instructions within a predicated block)
I've added a couple of demo instructions that derive from the new
Tablegen base classes and use those two operand clusters. The bulk of
the vector instructions will come in followup commits small enough to
be manageable. (One exception is that I've added the full version of
`isMnemonicVPTPredicable` in the AsmParser, because it seemed
pointless to carefully split it up.)
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62669
llvm-svn: 363258
Add support for s.d instruction for Mips1 which expands into two swc1
instructions.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D63199
llvm-svn: 363184
This introduces a new decoding table for MVE instructions, and starts
by adding the family of scalar shift instructions that are part of the
MVE architecture extension: saturating shifts within a single GPR, and
long shifts across a pair of GPRs (both saturating and normal).
Some of these shift instructions have only 3-bit register fields in
the encoding, with the low bit fixed. So they can only address an odd
or even numbered GPR (depending on the operand), and therefore I add
two new register classes, GPREven and GPROdd.
Differential Revision: https://reviews.llvm.org/D62668
Change-Id: Iad95d5f83d26aef70c674027a184a6b1e0098d33
llvm-svn: 363051
This adds support for the new family of conditional selection /
increment / negation instructions; the low-overhead branch
instructions (e.g. BF, WLS, DLS); the CLRM instruction to zero a whole
list of registers at once; the new VMRS/VMSR and VLDR/VSTR
instructions to get data in and out of 8.1-M system registers,
particularly including the new VPR register used by MVE vector
predication.
To support this, we also add a register name 'zr' (used by the CSEL
family to force one of the inputs to the constant 0), and operand
types for lists of registers that are also allowed to include APSR or
VPR (used by CLRM). The VLDR/VSTR instructions also need a new
addressing mode.
The low-overhead branch instructions exist in their own separate
architecture extension, which we treat as enabled by default, but you
can say -mattr=-lob or equivalent to turn it off.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Reviewed By: samparker
Subscribers: miyuki, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62667
llvm-svn: 363039
These caused a build failure because I managed not to notice they
depended on a later unpushed commit in my current stack. Sorry about
that.
llvm-svn: 362956
This should have been part of r362953, but I had a finger-trouble
incident and committed the old rather than new version of the patch.
Sorry.
llvm-svn: 362955
This adds support for the new family of conditional selection /
increment / negation instructions; the low-overhead branch
instructions (e.g. BF, WLS, DLS); the CLRM instruction to zero a whole
list of registers at once; the new VMRS/VMSR and VLDR/VSTR
instructions to get data in and out of 8.1-M system registers,
particularly including the new VPR register used by MVE vector
predication.
To support this, we also add a register name 'zr' (used by the CSEL
family to force one of the inputs to the constant 0), and operand
types for lists of registers that are also allowed to include APSR or
VPR (used by CLRM). The VLDR/VSTR instructions also need some new
addressing modes.
The low-overhead branch instructions exist in their own separate
architecture extension, which we treat as enabled by default, but you
can say -mattr=-lob or equivalent to turn it off.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Reviewed By: samparker
Subscribers: miyuki, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62667
llvm-svn: 362953
Arm v8.1-M supports the VMOV instructions that move a half-precision
value to and from a GPR, but not if the GPR is SP or PC.
To fix this, I've changed those instructions to use the rGPR register
class instead of GPR. rGPR always excludes PC, and it excludes SP
except in the presence of the HasV8Ops target feature (i.e. Arm v8-A).
So the effect is that VMOV.F16 to and from PC is now illegal
everywhere, but VMOV.F16 to and from SP is illegal only on non-v8-A
cores (which I believe is all as it should be).
Reviewers: dmgreen, samparker, SjoerdMeijer, ostannard
Reviewed By: ostannard
Subscribers: ostannard, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60704
llvm-svn: 362942
Summary:
This patch fixes a bug in the assembler that permitted a type suffix on
predicate registers when not expected. For instance, the following was
previously valid:
faddv h0, p0.q, z1.h
This bug was present in all SVE instructions containing predicates with
no type suffix and no predication form qualifier, i.e. /z or /m. The
latter instructions are already caught with an appropiate error message
by the assembler, e.g.:
.text
<stdin>:1:13: error: not expecting size suffix
cmpne p1.s, p0.b/z, z2.s, 0
^
A similar issue for SVE vector registers was fixed in:
https://reviews.llvm.org/D59636
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D62942
llvm-svn: 362780
We should keep the symbol type (STT_GNU_IFUNC) for a local ifunc because
it may result in an IRELATIVE reloc that the dynamic loader will use to
resolve the address at startup time.
There is another problem that is not fixed by this patch: a PC relative
relocation should also create a relocation with the ifunc symbol.
llvm-svn: 362767
The family of 32-bit Thumb instruction encodings that include t2ORR,
t2AND and t2EOR are all listed in the ArmARM as having (0) in bit 15.
The Tablegen descriptions of those instructions listed them as ?. This
change tightens that up by making them into 0 + Unpredictable.
In the specific case of t2ORR, we tighten it up still further by
making the zero bit mandatory. This change comes from Arm v8.1-M, in
which encodings with that bit equal to 1 will now be used for
different instructions.
Reviewers: dmgreen, samparker, SjoerdMeijer, efriedma
Reviewed By: dmgreen, efriedma
Subscribers: efriedma, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60705
llvm-svn: 362470
Summary:
This patch adds tests for directives .arch, .arch_extension and .cpu for
all features defined in Arm SVE2 architecture extension.
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D62602
llvm-svn: 362378
This allows the DWARFExpression class to handle addresses without
crashing on targets with 16-bit pointers like AVR.
This is required in order to generate assembly from clang via the '-S'
flag.
This fixes an error with the following message:
clang: llvm/include/llvm/DebugInfo/DWARF/DWARFExpression.h:132: llvm::DWARFExpression::DWARFExpression(llvm::DataExtractor, uint16_t, uint8_t):
Assertion `AddressSize == 8 || AddressSize == 4' failed.
llvm-svn: 362290
Testing with debuggers shows that our previous behavior was correct.
The reason I thought MSVC did things differently is that MSVC prefers to
use the 0xB combined code offset and code length update opcode when
inline sites are discontiguous.
Keep the test changes, and update the llvm-pdbutil inline line table
dumper to account for this new interpretation of the opcodes.
llvm-svn: 362277
After improving the inline line table dumper in llvm-pdbutil and looking
at MSVC's inline line tables, it is clear that setting the length of the
inlined code region does not update the code offset. This means that the
delta to the beginning of a new discontiguous inlined code region should
be calculated relative to the last code offset, excluding the length.
Implementing this is a one line fix for MC: simply don't update
LastLabel.
While I'm updating these test cases, switch them to use llvm-objdump -d
and llvm-pdbutil. This allows us to show offsets of each instruction and
correlate the line table offsets to the actual code.
llvm-svn: 362264
Summary:
A three sources variant of the TBL instruction is added to the existing
SVE instruction in SVE2. This is implemented with minor changes to the
existing TableGen class. TBX is a new instruction with its own
definition.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D62600
llvm-svn: 362214
The MVE extension in Arm v8.1-M permits the use of some move, load and
store isntructions which access the FP registers, even if there's no
actual FP support in the processor (in particular, if you have the
integer-only version of MVE).
Therefore, we need separate subtarget features to condition those
instructions on, which are implied by both FP and MVE but are not part
of either.
Patch mostly by Simon Tatham.
Differential Revision: https://reviews.llvm.org/D60694
llvm-svn: 362088
This ports and improves on some existing llvm-readobj -codeview dumping
functionality that llvm-pdbutil lacked.
Helpful for comparing inline line tables between MSVC and clang.
llvm-svn: 362037
Summary:
Patch adds support for the following instructions:
* EOR3, BSL, BCAX, BSL1N, BSL2N, NBSL, XAR
Aliases for types .B/.H/.S for EOR3 and BCAX have been added, the
preferred disassembly is .D.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D62387
llvm-svn: 361936
Summary:
Patch adds support for the following instructions:
SVE2 floating-point pairwise operations:
* FADDP, FMAXNMP, FMINNMP, FMAXP, FMINP
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D62383
llvm-svn: 361933
D18885 emitted 5 bytes for call *foo@tlsdesc(%rax). It should use the
2-byte form instead and let R_X86_64_TLSDESC_CALL apply to the beginning
of the call instruction.
The 2-byte form was deliberately chosen to make ->LE and ->IE relaxation work:
0: 48 8d 05 00 00 00 00 lea 0x0(%rip),%rax # 7 <.text+0x7>
3: R_X86_64_GOTPC32_TLSDESC a-0x4
7: ff 10 callq *(%rax)
7: R_X86_64_TLSDESC_CALL a
=>
0: 48 c7 c0 fc ff ff ff mov $0xfffffffffffffffc,%rax
7: 66 90 xchg %ax,%ax
Also change the symbol type to STT_TLS when VK_TLSCALL or VK_TLSDESC is
seen.
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D62512
llvm-svn: 361910
Those two subtarget features were awkward because their semantics are
reversed: each one indicates the _lack_ of support for something in
the architecture, rather than the presence. As a consequence, you
don't get the behavior you want if you combine two sets of feature
bits.
Each SubtargetFeature for an FP architecture version now comes in four
versions, one for each combination of those options. So you can still
say (for example) '+vfp2' in a feature string and it will mean what
it's always meant, but there's a new string '+vfp2d16sp' meaning the
version without those extra options.
A lot of this change is just mechanically replacing positive checks
for the old features with negative checks for the new ones. But one
more interesting change is that I've rearranged getFPUFeatures() so
that the main FPU feature is appended to the output list *before*
rather than after the features derived from the Restriction field, so
that -fp64 and -d32 can override defaults added by the main feature.
Reviewers: dmgreen, samparker, SjoerdMeijer
Subscribers: srhines, javed.absar, eraman, kristof.beyls, hiraditya, zzheng, Petar.Avramovic, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D60691
llvm-svn: 361845
Summary:
Patch adds support for the following instructions:
SVE2 crypto constructive binary operations:
* SM4EKEY, RAX1
SVE2 crypto destructive binary operations:
* AESE, AESD, SM4E
SVE2 crypto unary operations:
* AESMC, AESIMC
AESE, AESD, AESMC and AESIMC are enabled with +sve2-aes. SM4E and
SM4EKEY are enabled with +sve2-sm4. RAX1 is enabled with +sve2-sha3.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D62307
llvm-svn: 361797
Summary:
Patch adds support for the following instructions:
SVE2 histogram generation (segment):
* HISTSEG
SVE2 histogram generation (vector):
* HISTCNT
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D62306
llvm-svn: 361796
Summary:
Patch adds support for the following instructions:
SVE2 bitwise exclusive-or interleaved:
* EORBT, EORTB
SVE2 bitwise permute:
* BEXT, BDEP, BGRP
SVE2 bitwise shift left long:
* SSHLLB, SSHLLT, USHLLB, USHLLT
SVE2 integer add/subtract interleaved long:
* SADDLBT, SSUBLBT, SSUBLTB
BDEP, BEXT and BGRP are enabled with SVE2 feature +bitperm, all other
instructions in this group are enabled with +sve2.
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D62304
llvm-svn: 361795
Summary:
This patch adds support for the polynomial multiplication instructions
PMULLB/PMULLT. The 64-bit source and 128-bit destination element
variants are enabled with crypto extensions (+sve2-aes), similar to the
NEON PMULL2 instruction. All other variants are enabled with +sve2.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D62145
llvm-svn: 361619
Summary:
This patch adds support for the SVE2 saturating/rounding bitwise shift
left (predicated) group of instructions:
* SRSHL, URSHL, SRSHLR, URSHLR, SQSHL, UQSHL, SQRSHL, UQRSHL,
SQSHLR, UQSHLR, SQRSHLR, UQRSHLR
Immediate forms of the SQSHL and UQSHL instructions are also added to
the existing SVE bitwise shift by immediate (predicated) group, as well
as three new instructions SRSHR/URSHR/SQSHLU. The new instructions in
this group are encoded similarly and are implemented using the same
TableGen class with a minimal change (1 bit in encoding).
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D62140
llvm-svn: 361612
This patch adds the pseudo instructions la.tls.ie and la.tls.gd, used in
the initial-exec and global-dynamic TLS models respectively when
addressing a global. The pseudo instructions are expanded in the
assembly parser.
llvm-svn: 361499
This provides the correct file path for the original source, rather
than the preprocessed source.
Part of the fix for PR41839.
Differential Revision: https://reviews.llvm.org/D62074
llvm-svn: 361248
This option provides only the base filename, not a full relative path.
Part of the fix for PR41839.
Differential Revision: https://reviews.llvm.org/D62071
llvm-svn: 361245
On PowerPC64 ELFv2 ABI, functions may have 2 entry points: global and local.
The local entry point location of a function is stored in the st_other field of the symbol, as an offset relative to the global entry point.
In order to make symbol assignments (e.g. .equ/.set) work properly with this, PPCTargetELFStreamer already copies the local entry bits from the source symbol to the destination one, on emitAssignment(). The problem is that this copy is performed only at the assignment location, where the source symbol may not yet have processed the .localentry directive, that sets the local entry. This may cause the destination symbol to end up with wrong local entry information. Other symbol info is not affected by this because, in this case, the destination symbol value is actually a symbol reference.
This change keeps track of these assignments, and update all needed st_other fields when finish() is called.
Patch by Leandro Lupori!
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D56586
llvm-svn: 361237
Summary:
This patch adds support for the integer pairwise add and accumulate long
instructions SADALP/UADALP. These instructions are predicated.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D62001
llvm-svn: 361154
Summary:
This patch adds support for the predicated integer halving add/sub
instructions:
* SHADD, UHADD, SRHADD, URHADD
* SHSUB, UHSUB, SHSUBR, UHSUBR
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: rovka
Differential Revision: https://reviews.llvm.org/D62000
llvm-svn: 361136
Summary:
Patch adds support for indexed and unpredicated vectors forms of the
following instructions:
* SQDMLALB, SQDMLALT, SQDMLSLB, SQDMLSLT
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D61997
llvm-svn: 361005
Summary:
Patch adds support for indexed and unpredicated vectors forms of the
following instructions:
* SMLALB, SMLALT, UMLALB, UMLALT, SMLSLB, SMLSLT, UMLSLB, UMLSLT
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: rovka
Differential Revision: https://reviews.llvm.org/D61951
llvm-svn: 361003
Summary:
Patch adds support for indexed and unpredicated vectors forms of the
following instructions:
* SMULLB, SMULLT, UMULLB, UMULLT, SQDMULLB, SQDMULLT
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: rovka
Differential Revision: https://reviews.llvm.org/D61936
llvm-svn: 361002
This can be used to create references among sections. When --gc-sections
is used, the referenced section will be retained if the origin section
is retained.
llvm-svn: 360990
This patch implements a limited form of autolinking primarily designed to allow
either the --dependent-library compiler option, or "comment lib" pragmas (
https://docs.microsoft.com/en-us/cpp/preprocessor/comment-c-cpp?view=vs-2017) in
C/C++ e.g. #pragma comment(lib, "foo"), to cause an ELF linker to automatically
add the specified library to the link when processing the input file generated
by the compiler.
Currently this extension is unique to LLVM and LLD. However, care has been taken
to design this feature so that it could be supported by other ELF linkers.
The design goals were to provide:
- A simple linking model for developers to reason about.
- The ability to to override autolinking from the linker command line.
- Source code compatibility, where possible, with "comment lib" pragmas in other
environments (MSVC in particular).
Dependent library support is implemented differently for ELF platforms than on
the other platforms. Primarily this difference is that on ELF we pass the
dependent library specifiers directly to the linker without manipulating them.
This is in contrast to other platforms where they are mapped to a specific
linker option by the compiler. This difference is a result of the greater
variety of ELF linkers and the fact that ELF linkers tend to handle libraries in
a more complicated fashion than on other platforms. This forces us to defer
handling the specifiers to the linker.
In order to achieve a level of source code compatibility with other platforms
we have restricted this feature to work with libraries that meet the following
"reasonable" requirements:
1. There are no competing defined symbols in a given set of libraries, or
if they exist, the program owner doesn't care which is linked to their
program.
2. There may be circular dependencies between libraries.
The binary representation is a mergeable string section (SHF_MERGE,
SHF_STRINGS), called .deplibs, with custom type SHT_LLVM_DEPENDENT_LIBRARIES
(0x6fff4c04). The compiler forms this section by concatenating the arguments of
the "comment lib" pragmas and --dependent-library options in the order they are
encountered. Partial (-r, -Ur) links are handled by concatenating .deplibs
sections with the normal mergeable string section rules. As an example, #pragma
comment(lib, "foo") would result in:
.section ".deplibs","MS",@llvm_dependent_libraries,1
.asciz "foo"
For LTO, equivalent information to the contents of a the .deplibs section can be
retrieved by the LLD for bitcode input files.
LLD processes the dependent library specifiers in the following way:
1. Dependent libraries which are found from the specifiers in .deplibs sections
of relocatable object files are added when the linker decides to include that
file (which could itself be in a library) in the link. Dependent libraries
behave as if they were appended to the command line after all other options. As
a consequence the set of dependent libraries are searched last to resolve
symbols.
2. It is an error if a file cannot be found for a given specifier.
3. Any command line options in effect at the end of the command line parsing apply
to the dependent libraries, e.g. --whole-archive.
4. The linker tries to add a library or relocatable object file from each of the
strings in a .deplibs section by; first, handling the string as if it was
specified on the command line; second, by looking for the string in each of the
library search paths in turn; third, by looking for a lib<string>.a or
lib<string>.so (depending on the current mode of the linker) in each of the
library search paths.
5. A new command line option --no-dependent-libraries tells LLD to ignore the
dependent libraries.
Rationale for the above points:
1. Adding the dependent libraries last makes the process simple to understand
from a developers perspective. All linkers are able to implement this scheme.
2. Error-ing for libraries that are not found seems like better behavior than
failing the link during symbol resolution.
3. It seems useful for the user to be able to apply command line options which
will affect all of the dependent libraries. There is a potential problem of
surprise for developers, who might not realize that these options would apply
to these "invisible" input files; however, despite the potential for surprise,
this is easy for developers to reason about and gives developers the control
that they may require.
4. This algorithm takes into account all of the different ways that ELF linkers
find input files. The different search methods are tried by the linker in most
obvious to least obvious order.
5. I considered adding finer grained control over which dependent libraries were
ignored (e.g. MSVC has /nodefaultlib:<library>); however, I concluded that this
is not necessary: if finer control is required developers can fall back to using
the command line directly.
RFC thread: http://lists.llvm.org/pipermail/llvm-dev/2019-March/131004.html.
Differential Revision: https://reviews.llvm.org/D60274
llvm-svn: 360984
This can be used to create references among sections. When --gc-sections
is used, the referenced section will be retained if the origin section
is retained.
See R_MIPS_NONE (D13659), R_ARM_NONE (D61992), R_AARCH64_NONE (D61973) for similar changes.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D62014
llvm-svn: 360983
Summary:
This can be used to create references among sections. When --gc-sections
is used, the referenced section will be retained if the origin section
is retained.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D61973
llvm-svn: 360981
R_ARM_NONE can be used to create references among sections. When
--gc-sections is used, the referenced section will be retained if the
origin section is retained.
Add a generic MCFixupKind FK_NONE as this kind of no-op relocation is
ubiquitous on ELF and COFF, and probably available on many other binary
formats. See D62014.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D61992
llvm-svn: 360980
In Intel syntax, it's not uncommon to see a "short" modifier on Jcc conditional
jumps, which indicates the offset should be a "short jump" (8-bit immediate
offset from EIP, -128 to +127). This patch expands to all recognized Jcc
condition codes, and removes the inline restriction.
Clang already ignores "jmp short" in inline assembly. However, only "jmp" and a
couple of Jcc are actually checked, and only inline (i.e., not when using the
integrated assembler for asm sources). A quick search through asm-containing
libraries at hand shows a pretty broad range of Jcc conditions spelled with
"short."
GAS ignores the "short" modifier, and instead uses an encoding based on the
given immediate. MS inline seems to do the same, and I suspect MASM does, too.
NASM will yield an error if presented with an out-of-range immediate value.
Example of GCC 9.1 and MSVC v19.20, "jmp short" with offsets that do and do not
fit within 8 bits: https://gcc.godbolt.org/z/aFZmjY
Differential Revision: https://reviews.llvm.org/D61990
llvm-svn: 360954
Summary:
The complex DOT instructions perform a dot-product on quadtuplets from
two source vectors and the resuling wide real or wide imaginary is
accumulated into the destination register. The instructions come in two
forms:
Vector form, e.g.
cdot z0.s, z1.b, z2.b, #90 - complex dot product on four 8-bit quad-tuplets,
accumulating results in 32-bit elements. The
complex numbers in the second source vector are
rotated by 90 degrees.
cdot z0.d, z1.h, z2.h, #180 - complex dot product on four 16-bit quad-tuplets,
accumulating results in 64-bit elements.
The complex numbers in the second source
vector are rotated by 180 degrees.
Indexed form, e.g.
cdot z0.s, z1.b, z2.b[3], #0 - complex dot product on four 8-bit quad-tuplets,
with specified quadtuplet from second source vector,
accumulating results in 32-bit elements.
cdot z0.d, z1.h, z2.h[1], #0 - complex dot product on four 16-bit quad-tuplets,
with specified quadtuplet from second source vector,
accumulating results in 64-bit elements.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer, rovka
Differential Revision: https://reviews.llvm.org/D61903
llvm-svn: 360870
Summary:
Add support for the following instructions:
* MUL (indexed and unpredicated vectors forms)
* SQDMULH (indexed and unpredicated vectors forms)
* SQRDMULH (indexed and unpredicated vectors forms)
* SMULH (unpredicated, predicated form added in SVE)
* UMULH (unpredicated, predicated form added in SVE)
* PMUL (unpredicated)
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer, rovka
Differential Revision: https://reviews.llvm.org/D61902
llvm-svn: 360867
LLVM previously used `DW_CFA_def_cfa` instruction in .eh_frame to set
the register and offset for current CFA rule. We change it to
`DW_CFA_def_cfa_register` which is the same one used by GAS that only
changes the register but keeping the old offset.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D61899
llvm-svn: 360765
The 3-field form was introduced by D3499 in 2014 and the legacy 2-field
form was planned to be removed in LLVM 4.0
For the textual format, this patch migrates the existing 2-field form to
use the 3-field form and deletes the compatibility code.
test/Verifier/global-ctors-2.ll checks we have a friendly error message.
For bitcode, lib/IR/AutoUpgrade UpgradeGlobalVariables will upgrade the
2-field form (add i8* null as the third field).
Reviewed By: rnk, dexonsmith
Differential Revision: https://reviews.llvm.org/D61547
llvm-svn: 360742
Summary:
This patch adds support for the following instructions:
MLA mul-add, writing addend (Zda = Zda + Zn * Zm[idx])
MLS mul-sub, writing addend (Zda = Zda + -Zn * Zm[idx])
Predicated forms of these instructions were added in SVE.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: rovka
Differential Revision: https://reviews.llvm.org/D61514
llvm-svn: 360682
Simon Atanasyan