This will allow to generate non-wrap assumptions for integer expressions
that are part of the SCoP. We compare the common isl representation of
the expression with one computed with modulo semantic. For all parameter
combinations they are not equal we can have integer overflows.
The nsw flags are respected when the modulo representation is computed,
nuw and nw flags are ignored for now.
In order to not increase compile time to much, the non-wrap assumptions
are collected in a separate boundary context instead of the assumed
context. This helps compile time as the boundary context can become
complex and it is therefor not advised to use it in other operations
except runtime check generation. However, the assumed context is e.g.,
used to tighten dependences. While the boundary context might help to
tighten the assumed context it is doubtful that it will help in practice
(it does not effect lnt much) as the boundary (or no-wrap assumptions)
only restrict the very end of the possible value range of parameters.
PET uses a different approach to compute the no-wrap context, though lnt runs
have shown that this version performs slightly better for us.
llvm-svn: 247732
Add polly-check-format as dependency of check-polly if clang-format is
available in the same build.
Differential Revision: http://reviews.llvm.org/D12850
llvm-svn: 247600
At some point we build loop trip counts using this method. It was replaced by
a simpler trick that works only for affine (e.g., not modulo) constraints and
relies on the removal of unbounded parts. In order to allow modulo constrains
again we go back to the former, more accurate method.
llvm-svn: 247540
The function use_after_scop would iterate from 0 to 1024 and accessing element A[1024] where A has only valid indexes from 0 to 1023. Polly detects the situation of unconditionally undefined behavior and bail out in ScopInfo as non-feasible for optimization.
Other tests add impossible context assumptions as well, hance might show the same problem.
llvm-svn: 247412
Hoist runtime checks in the loop nest if they guard an "error" like event.
Such events are recognized as blocks with an unreachable terminator or a call
to the ubsan function that deals with out of bound accesses. Other "error"
events can be added easily.
We will ignore these blocks when we detect/model/optmize and code generate SCoPs
but we will make sure that they would not have been executed using the assumption
framework.
llvm-svn: 247310
As we do not rely on ScalarEvolution any more we do not need to get
the backedge taken count. Additionally, our domain generation handles
everything that is affine and has one latch and our ScopDetection will
over-approximate everything else.
This change will therefor allow loops with:
- one latch
- exiting conditions that are affine
Additionally, it will not check for structured control flow anymore.
Hence, loops and conditionals are not necessarily single entry single
exit regions any more.
Differential Version: http://reviews.llvm.org/D12758
llvm-svn: 247289
The TempScopInfo (-polly-analyze-ir) pass is removed and its work taken
over by ScopInfo (-polly-scops). Several tests depend on
-polly-analyze-ir and use -polly-scops instead which for the moment
prints the output of both passes. This again is not expected by some
other tests, especially those with negative searches, which have been
adapted.
Differential Version: http://reviews.llvm.org/D12694
llvm-svn: 247288
This patch replaces the last legacy part of the domain generation, namely the
ScalarEvolution part that was used to obtain loop bounds. We now iterate over
the loops in the region and propagate the back edge condition to the header
blocks. Afterwards we propagate the new information once through the whole
region. In this process we simply ignore unbounded parts of the domain and
thereby assume the absence of infinite loops.
+ This patch already identified a couple of broken unit tests we had for
years.
+ We allow more loops already and the step to multiple exit and multiple back
edges is minimal.
+ It allows to model the overflow checks properly as we actually visit
every block in the SCoP and know where which condition is evaluated.
- It is currently not compatible with modulo constraints in the
domain.
Differential Revision: http://reviews.llvm.org/D12499
llvm-svn: 247279
The support for modulo expressions is not comlete and makes the new
domain generation harder. As the currently broken domain generation
needs to be replaced, we will first swap in the new, fixed domain
generation and make it compatible with the modulo expressions later.
llvm-svn: 247278
The support for pointer expressions is broken as it can only handle
some patterns in the IslExprBuilder. We should to treat pointers in
expressions the same as integers at some point and revert this patch.
llvm-svn: 247147
While we do not need to model PHI nodes in the region exit (as it is not part
of the SCoP), we need to prepare for the case that the exit block is split in
code generation to create a single exiting block. If this will happen, hence
if the region did not have a single exiting block before, we will model the
operands of the PHI nodes as escaping scalars in the SCoP.
Differential Revision: http://reviews.llvm.org/D12051
llvm-svn: 247078
Instead of having two separate options
-polly-detect-scops-in-functions-without-loops and
-polly-detect-scops-in-regions-without-loops we now just use
-polly-detect-unprofitable to force the detection of scops ignoring any compile
time saving bailout heuristics.
llvm-svn: 247057
Certain backends, e.g. NVPTX, do not support '.' in function names. Hence,
we ensure all '.' are replaced by '_' when generating function names for
subfunctions. For the current OpenMP code generation, this is not strictly
necessary, but future uses cases (e.g. GPU offloading) need this issue to be
fixed.
llvm-svn: 246980
Our alias metadata is currently not emitted in a deterministic order. As it
is not needed in this test, we just drop it for now (but keep in mind to fix
this).
llvm-svn: 246942
When this option is enabled, Polly will emit printf calls for each scalar
load/and store which dump the scalar value loaded/stored at run time.
This patch also refactors the RuntimeDebugBuilder to use variadic templates
when generating CPU printfs. As result, it now becomes easier to print
strings that consist of a set of arguments. Also, as a single printf
call is emitted, it is more likely for such strings to be emitted atomically
if executed multi-threaded.
llvm-svn: 246941
When computing the index expressions for new, multi-dimensional memory accesses
these new index expressions may reference original llvm::Values that are not
transfered into the OpenMP subfunction. Using GlobalMap we now replace
references to such values with the rewritten values that have e.g. been passed
to the OpenMP subfunction.
llvm-svn: 246923
Originally, we disallowed the import of multi-dimensional access functions due
to our code generation not supporting the generation of new address expressions
for multi-dimensional memory accesses. When building our run-time alias check
infrastructure we added code generation support for multi-dimensional address
calculations. Hence, we can now savely allow the import of new
multi-dimensional access functions.
llvm-svn: 246917
This case probably does not happen for LLVM generated code that is in loop
simplify form, but Polly does support such kind of loops. This commit ensures we
have test coverage as well.
llvm-svn: 246543
Code generation currently does not expect unbounded loops. When
using ISL to compute the loop trip count, if we find that the
iteration domain remains unbounded, we invalidate the Scop by
creating an infeasible context.
Contributed-by: Matthew Simpson <mssimpso@codeaurora.org>
This fixes PR24634.
Differential Revision: http://reviews.llvm.org/D12493
llvm-svn: 246477
Before this commit we did this only for Arguments or Constants, but indeed
an instruction may define a value a lot higher up in the dominance tree, but
the actual write generally needs to happen right before branching to the
PHI node. Otherwise, the writes of different branches into PHI nodes may get
intermixed if they lay higher up in the dominance tree.
llvm-svn: 246441
There is no reason the loops in a region need to touch either entry or exit
block. Hence, we need to look through all loops that may touch the region as
well as their children to understand if our region has at least two loops.
llvm-svn: 246433
While ignoring read-only scalar dependences it was not necessary to consider
store instructins, but as store instructions can be the target of a scalar
read-only dependency we need to consider them for the construction of scalar
read-only dependences.
llvm-svn: 246429
Our OpenMP code generation generated part of its launching code directly into
the start basic block and without this change the scalar initialization was
run _after_ the OpenMP threads have been launched. This resulted in
uninitialized scalar values to be used.
llvm-svn: 246427
In order to compute domain conditions for conditionals we will now
traverse the region in the ScopInfo once and build the domains for
each block in the region. The SCoP statements can then use these
constraints when they build their domain.
The reason behind this change is twofold:
1) This removes a big chunk of preprocessing logic from the
TempScopInfo, namely the Conditionals we used to build there.
Additionally to moving this logic it is also simplified. Instead
of walking the dominance tree up for each basic block in the
region (as we did before), we now traverse the region only
once in order to collect the domain conditions.
2) This is the first step towards the isl based domain creation.
The second step will traverse the region similar to this step,
however it will propagate back edge conditions. Once both are in
place this conditional handling will allow multiple exit loops
additional logic.
Reviewers: grosser
Differential Revision: http://reviews.llvm.org/D12428
llvm-svn: 246398
We already modeled read-only dependences to scalar values defined outside the
scop as memory reads and also generated read accesses from the corresponding
alloca instructions that have been used to pass these scalar values around
during code generation. However, besides for PHI nodes that have already been
handled, we failed to store the orignal read-only scalar values into these
alloc. This commit extends the initialization of scalar values to all read-only
scalar values used within the scop.
llvm-svn: 246394
Our code generation currently does not support scalar references to metadata
values. Hence, it would crash if we try to model scalar dependences to metadata
values. Fortunately, for one of the common uses, debug information, we can
for now just ignore the relevant intrinsics and consequently the issue of how
to model scalar dependences to metadata.
llvm-svn: 246388
I ran the script from r246327 and it touched all the right files;
committing now to hopefully right the bots, but if my check-polly
doesn't come back clean I'll keep looking.
http://lab.llvm.org:8011/builders/polly-amd64-linux/builds/33648
llvm-svn: 246341
If a region does not have more than one loop, we do not identify it as
a Scop in ScopDetection. The main optimizations Polly is currently performing
(tiling, preparation for outer-loop vectorization and loop fusion) are unlikely
to have a positive impact on individual loops. In some cases, Polly's run-time
alias checks or conditional hoisting may still have a positive impact, but those
are mostly enabling transformations which LLVM already performs for individual
loops. As we do not focus on individual loops, we leave them untouched to not
introduce compile time regressions and execution time noise. This results in
good compile time reduction (oourafft: -73.99%, smg2000: -56.25%).
Contributed-by: Pratik Bhatu <cs12b1010@iith.ac.in>
Reviewers: grosser
Differential Revision: http://reviews.llvm.org/D12268
llvm-svn: 246161
Use ISL to compute the loop trip count when scalar evolution is unable to do
so.
Contributed-by: Matthew Simpson <mssimpso@codeaurora.org>
Differential Revision: http://reviews.llvm.org/D9444
llvm-svn: 246142
Johannes Doerfert