We often need to deal with the value lattice that contains none and
undef as special values. A simple helper makes this much nicer.
Differential Revision: https://reviews.llvm.org/D103857
When we do simplification via AAPotentialValues or AAValueConstantRange
we need to simplify the operands of an instruction we deconstruct first.
This does not only improve the result, see for example range.ll, but is
required as we allow outside AAs to provide simplification rules via
callbacks. If we do ignore the simplification rules and base other
simplifications on the IR instead we can create an inconsistent state.
These intrinsics don't need to be marked as arbitrary writing,
it's sufficient to write inaccessible memory (aka "side effect")
to preserve control dependencies. This means less special-casing
in BasicAA. This is intended as an alternative to D98925.
Differential Revision: https://reviews.llvm.org/D99022
The update_test_checks script can now check for global symbols and is able
to handle them properly when they differ across prefixes, e.g.,
attribute #0 might be different in different runs.
This patch simply updates all the Attributor tests with the new script.
Reviewed By: sstefan1
Differential Revision: https://reviews.llvm.org/D97906
We don't need a bool and an enum to express the three options we
currently have. This makes the interface nicer and much easier to
use optional dependencies. Also avoids mistakes where the bool is
false and enum ignored.
This is a follow-up of D95238's LangRef update.
This patch updates `programUndefinedIfUndefOrPoison(V)` to return true if
`V` is used by any memory-accessing instruction.
Interestingly, this affected many tests in Attributors, mainly about adding noundefs.
The tests are updated using llvm/utils/update_test_checks.py. I checked that the diffs
are about updating noundefs.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D96642
D70365 allows us to make attributes default. This is a follow up to
actually make nosync, nofree and willreturn default. The approach we
chose, for now, is to opt-in to default attributes to avoid introducing
problems to target specific intrinsics. Intrinsics with default
attributes can be created using `DefaultAttrsIntrinsic` class.
Even though `noundef` IR attribute might be attached to non-void type values, AANoUndef is mistakenly identified for pointer type values only.
This patch fixes that.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86737
Currently, `AANoUndefImpl::initialize` mistakenly always indicates optimistic fixpoint for function returned position.
This is because an associated value is `Function` in the case, and `isGuaranteedNotToBeUndefOrPoison` returns true for Function.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86361
`AADereferenceable::getAssumedDereferenceableBytes()` is actually
deducing `dereferenceable_or_null`. We should not use that information
to deduce `nonnull`, since it doesn't imply `nonnull`.
This patch introduces a new abstract attribute `AANoUndef` which corresponds to `noundef` IR attribute and deduce them.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85184
Before this change we looked through all memory operations in a function
even if the first was an unknown call that could do anything. This did
cost a lot of time but there is little use to do so. We also avoid
creating AAs for things that we would have looked at in case no other AA
will; that is the reason for the test changes.
Running only the attributor-cgscc pass on a IR version of
`llvm-test-suite/MultiSource/Applications/SPASS/clause.c` reduced the
time we spend in `AAMemoryLocation::update` from 4% total to
0.9% (disclaimer: no accurate measurements).
This patch enables `AAValueSimplify` to use information from `AAPotentialValues`
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85668
All these tests already explicitly test against both legacy PM and NPM.
$ sed -i 's/ -attributor / -attributor -enable-new-pm=0 /g' $(rg --path-separator // -l -- -passes=)
$ sed -i 's/ -attributor-cgscc / -attributor-cgscc -enable-new-pm=0 /g' $(rg --path-separator // -l -- -passes=)
Now all tests in Transforms/Attributor/ pass under NPM.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D84813
Summary:
All tests are updated, except wrapper.ll since it is not working nicely
with newly created functions.
Reviewers: jdoerfert, uenoku, baziotis, homerdin
Subscribers: arphaman, jfb, kuter, bbn, okura, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84130
We should never give up on AAIsDead as it guards other AAs from
unreachable code (in which SSA properties are meaningless). We did
however use required dependences on some queries in AAIsDead which
caused us to invalidate AAIsDead if the queried AA got invalidated.
We now use optional dependences instead. The bug that exposed this is
added to the liveness.ll test and other test changes show the impact.
Bug report by @sdmitriev.
If we have a dependence between an abstract attribute A to an abstract
attribute B such hat changes in A should trigger an update of B, we do
not need to keep the dependence around once the update was triggered. If
the dependence is still required the update will reinsert it into the
dependence map, if it is not we avoid triggering B in the future. This
replaces the "recompute interval" mechanism we used before to prune
stale dependences.
Number of required iterations is generally down, compile time for the
module pass (not really the CGSCC pass) is down quite a bit.
There is one test change which looks like an artifact in the undefined
behavior AA that needs to be looked at.
Since we use the fact that some uses are droppable in the Attributor we
need to handle them explicitly when we replace uses. As an example, an
assumed dead value can have live droppable users. In those we cannot
replace the value simply by an undef. Instead, we either drop the uses
(via `dropDroppableUses`) or keep them as they are. In this patch we do
both, depending on the situation. For values that are dead but not
necessarily removed we keep droppable uses around because they contain
information we might be able to use later. For values that are removed
we drop droppable uses explicitly to avoid replacement with undef.
When the Attributor was created the test update scripts were not well
suited to deal with the challenges of IR attribute checking. This
partially improved.
Since then we also added three additional configurations that need
testing; in total we now have the following four:
{ TUNIT, CGSCC } x { old pass manager (OPM), new pass manager (NPM) }
Finally, the number of developers and tests grew rapidly (partially due
to the addition of ArgumentPromotion and IPConstantProp tests), which
resulted in tests only being run in some configurations, different
prefixes being used, and different "styles" of checks being used.
Due to the above reasons I believed we needed to take another look at
the test update scripts. While we started to use them, via UTC_ARGS:
--enable/disable, the other problems remained. To improve the testing
situation for *all* configurations, to simplify future updates to the
test, and to help identify subtle effects of future changes, we now use
the test update scripts for (almost) all Attributor tests.
An exhaustive prefix list minimizes the number of check lines and makes
it easy to identify and compare configurations.
Tests have been adjusted in the process but we tried to keep their
intend unchanged.
Reviewed By: sstefan1
Differential Revision: https://reviews.llvm.org/D76588
When the Attributor was created the test update scripts were not well
suited to deal with the challenges of IR attribute checking. This
partially improved.
Since then we also added three additional configurations that need
testing; in total we now have the following four:
{ TUNIT, CGSCC } x { old pass manager (OPM), new pass manager (NPM) }
Finally, the number of developers and tests grew rapidly (partially due
to the addition of ArgumentPromotion and IPConstantProp tests), which
resulted in tests only being run in some configurations, different
prefixes being used, and different "styles" of checks being used.
Due to the above reasons I believed we needed to take another look at
the test update scripts. While we started to use them, via UTC_ARGS:
--enable/disable, the other problems remained. To improve the testing
situation for *all* configurations, to simplify future updates to the
test, and to help identify subtle effects of future changes, we now use
the test update scripts for (almost) all Attributor tests.
An exhaustive prefix list minimizes the number of check lines and makes
it easy to identify and compare configurations.
Tests have been adjusted in the process but we tried to keep their
intend unchanged.
Reviewed By: sstefan1
Differential Revision: https://reviews.llvm.org/D76588
Use DL & ABI information for better alignment deduction, e.g., if a type
is accessed and the ABI specifies an alignment requirement for such an
access we can use it. This is based on a patch by @lebedev.ri and
inspired by getBaseAlign in Loads.cpp.
Depends on D76673.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D76674
This patch integrates operand bundle llvm.assumes [0] with the
Attributor. Most IRAttributes will now look at uses of the associated
value and if there are llvm.assume operand bundle uses with the right
tag we will check if they are in the must-be-executed-context (around
the context instruction). Droppable users, which is currently only
llvm::assume, are handled special in some places now as well.
[0] http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D74888
This patch introduces the propagation of known information based on path exploration.
For example,
```
int u(int c, int *p){
if(c) {
return *p;
} else {
return *p + 1;
}
}
```
An argument `p` is dereferenced whatever c's value is.
For an instruction `CtxI`, we accumulate branch instructions in the must-be-executed-context of `CtxI` and then, we take the conjunction of the successors' known state.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D65593
Summary:
As mentioned in D71974, it is useful for must-be-executed-context to explore CFG backwardly.
This patch is ported from parts of D64975. We use a dominator tree to find the previous context if
a dominator tree is available.
Reviewers: jdoerfert, hfinkel, baziotis, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74817
The change is performed as stated by the FIXME and the tests are
adjusted. All changes look fine to me and values can be inferred as
undef without it being an error.
If we invalidate an attribute we need to inform all dependent ones even
if the fixpoint state is not invalid. Before we only continued
invalidation if the fixpoint state was invalid, now we signal a change
in case the fixpoint state is valid.
The test case was already included in D71620 but the problem was hiding
because it only manifested with the old PM (for that input).
Summary:
This patch introduces `AAValueConstantRange`, which answers a possible range for integer value in a specific program point.
One of the motivations is propagating existing `range` metadata. (I think we need to change the situation that `range` metadata cannot be put to Argument).
The state is a tuple of `ConstantRange` and it is initialized to (known, assumed) = ([-∞, +∞], empty).
Currently, AAValueConstantRange is created in `getAssumedConstant` method when `AAValueSimplify` returns `nullptr`(worst state).
Supported
- BinaryOperator(add, sub, ...)
- CmpInst(icmp eq, ...)
- !range metadata
`AAValueConstantRange` is not intended to extend to polyhedral range value analysis.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: phosek, davezarzycki, baziotis, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71620
An inbounds GEP results in poison if the value is not "inbounds", not in
UB. We accidentally derived nonnull and dereferenceable from these
inbounds GEPs even in the absence of accesses that would make the poison
to UB.
This patch introduces `AAValueConstantRange`, which answers a possible range for integer value in a specific program point.
One of the motivations is propagating existing `range` metadata. (I think we need to change the situation that `range` metadata cannot be put to Argument).
The state is a tuple of `ConstantRange` and it is initialized to (known, assumed) = ([-∞, +∞], empty).
Currently, AAValueConstantRange is created when AAValueSimplify cannot
simplify the value.
Supported
- BinaryOperator(add, sub, ...)
- CmpInst(icmp eq, ...)
- !range metadata
`AAValueConstantRange` is not intended to extend to polyhedral range value analysis.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D71620
Summary:
This patch moves the test cases related to Attributor to `Transforms/Attributor` folder.
We have used `Transforms/FunctionAttrs` as the primary folder for Attributor test but we need to change testing way now.
For the test cases which I think functionattrs doesn't infer anything something like (willreturn, nosync, value-simplify, h2s ..etc), I moved them with the command `git mv`.
For the test cases in which functoinattrs and attributor are tested, I copied the test to the folder and remove the check only used by functoinattrs.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70843
Johannes Doerfert