It breaks ExecutionEngine/OrcLazy/weak-function.ll on most bots.
Script:
--
...
--
Exit Code: 1
Command Output (stderr):
--
Could not find main function.
llvm-svn: 277907
This adds partial support for weak functions to the CompileOnDemandLayer by
modifying the addLogicalModule method to check for existing stub definitions
before building a new stub for a weak function. This scheme is sufficient to
support ODR definitions, but fails for general weak definitions if strong
definition is encountered after the first weak definition. (A more extensive
refactor will be required to fully support weak symbols).
This patch does *not* add weak symbol support to RuntimeDyld: I hope to add
that in the near future.
llvm-svn: 277896
Common symbol support in ORC was broken in r270716 when the symbol resolution
rules in RuntimeDyld were changed. With the switch to lazily materialized
symbols in r277386, common symbols can be supported by having
RuntimeDyld::emitCommonSymbols search for (but not materialize!) definitions
elsewhere in the logical dylib.
This patch adds the 'Common' flag to JITSymbolFlags, and the necessary check
to RuntimeDyld::emitCommonSymbols.
llvm-svn: 277397
This patch replaces RuntimeDyld::SymbolInfo with JITSymbol: A symbol class
that is capable of lazy materialization (i.e. the symbol definition needn't be
emitted until the address is requested). This can be used to support common
and weak symbols in the JIT (though this is not implemented in this patch).
For consistency, RuntimeDyld::SymbolResolver is renamed to JITSymbolResolver.
For space efficiency a new class, JITEvaluatedSymbol, is introduced that
behaves like the old RuntimeDyld::SymbolInfo - i.e. it is just a pair of an
address and symbol flags. Instances of JITEvaluatedSymbol can be used in
symbol-tables to avoid paying the space cost of the materializer.
llvm-svn: 277386
If there was a tail call, we would incorrectly handle the relocation. It would
end up indexing into the array with an incorrect section id. The symbol was
external to the module, so the Section ID was UNDEFINED (-1). We would then
index the SmallVector with this ID, triggering an assertion. Use the Value
rather than the section load address in this case.
llvm-svn: 275442
See http://reviews.llvm.org/D22079
Changes the Archive::child_begin and Archive::children to require a reference
to an Error. If iterator increment fails (because the archive header is
damaged) the iterator will be set to 'end()', and the error stored in the
given Error&. The Error value should be checked by the user immediately after
the loop. E.g.:
Error Err;
for (auto &C : A->children(Err)) {
// Do something with archive child C.
}
// Check the error immediately after the loop.
if (Err)
return Err;
Failure to check the Error will result in an abort() when the Error goes out of
scope (as guaranteed by the Error class).
llvm-svn: 275316
a good error message to be produced.
This is nearly the last libObject interface that used ErrorOr and the last one
that appears in llvm/include/llvm/Object/MachO.h . For Mach-O objects this is
just a clean up because it’s version of getSymbolAddress() can’t return an
error.
I will leave it to the experts on COFF and ELF to actually add meaning full
error messages in their tests if they wish. And also leave it to these experts
to change the last two ErrorOr interfaces in llvm/include/llvm/Object/ObjectFile.h
for createCOFFObjectFile() and createELFObjectFile() if they wish.
Since there are no test cases for COFF and ELF error cases with respect to
getSymbolAddress() in the test suite this is no functional change (NFC).
llvm-svn: 273701
This adds rudimentary support for COFF ARM to the dynamic loader for the
exeuction engine. This can be used by lldb to JIT code into a COFF ARM
environment. This lays the foundation for the loader, though a few of the
relocation types are yet unhandled.
llvm-svn: 273682
This is a convenience iterator that allows clients to enumerate the
GlobalObjects within a Module.
Also start using it in a few places where it is obviously the right thing
to use.
Differential Revision: http://reviews.llvm.org/D21580
llvm-svn: 273470
This fixes IMAGE_REL_I386_DIR32, IMAGE_REL_I386_DIR32NB,
IMAGE_REL_I386_SECREL, and IMAGE_REL_I386_REL32 relocations.
Based on patch by Jon Turney <jon.turney@dronecode.org.uk>
llvm-svn: 272911
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
llvm-svn: 272709
MCJIT will now set the DataLayout on a module when it is added to the JIT,
rather than waiting until it is codegen'd, and the runFunction method will
finalize the module containing the function to be run before running it.
The fibonacci example has been updated to include and link against MCJIT.
llvm-svn: 272455
This tidies up some code that was manually constructing RuntimeDyld::SymbolInfo
instances from JITSymbols. It will save more mess in the future when
JITSymbol::getAddress is extended to return an Expected<TargetAddress> rather
than just a TargetAddress, since we'll be able to embed the error checking in
the conversion.
llvm-svn: 271350
searching for external symbols, and fall back to the SymbolResolver::findSymbol
method if the former returns null.
This makes RuntimeDyld behave more like a static linker: Symbol definitions
from within the current module's "logical dylib" will be preferred to
external definitions. We can build on this behavior in the future to properly
support weak symbol handling.
Custom symbol resolvers that override the findSymbolInLogicalDylib method may
notice changes due to this patch. Clients who have not overridden this method
should generally be unaffected, however users of the OrcMCJITReplacement class
may notice changes.
llvm-svn: 270716
Having an enum member named Default is quite confusing: Is it distinct
from the others?
This patch removes that member and instead uses Optional<Reloc> in
places where we have a user input that still hasn't been maped to the
default value, which is now clear has no be one of the remaining 3
options.
llvm-svn: 269988
when the object is in an archive to use something like libx.a(foo.o) as part of
the error message.
Also changed llvm-objdump and llvm-size to be like llvm-nm and ignore non-object
files in archives and not produce any error message.
To do this Archive::Child::getAsBinary() was changed from ErrorOr<...> to
Expected<...> then that was threaded up to its users.
Converting this interface to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in one place yet to be fully converted.
Again there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comments for those.
llvm-svn: 269784
Summary: When the MCJIT generates ELF code, some DWARF data requires 64-bit PC-relative relocation (R_390_PC64). This patch adds support for R_390_PC64 relocation to RuntimeDyld::resolveSystemZRelocation, to avoid an assertion failure.
Reviewers: uweigand
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20033
llvm-svn: 269436
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
llvm-svn: 268298
std::to_string is not available from the Android NDK.
Reviewers: lhames, ovyalov, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19638
llvm-svn: 267829
Also replaces a number of calls to report_fatal_error with Error returns.
The plumbing will make it easier to return errors originating in libObject.
Replacing report_fatal_errors with Error returns will give JIT clients the
opportunity to recover gracefully when the JIT is unable to produce/relocate
code, as well as providing meaningful error messages that can be used to file
bug reports.
llvm-svn: 267776
This replaces use of std::error_code and ErrorOr in the ORC RPC support library
with Error and Expected. This required updating the OrcRemoteTarget API, Client,
and server code, as well as updating the Orc C API.
This patch also fixes several instances where Errors were dropped.
llvm-svn: 267457
The previous allocation code was over-estimating the amount of memory required.
No test case: we don't currently have a good way to detect conervative
over-allocation.
llvm-svn: 267041
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
llvm-svn: 266919
Three problems:
1. <future> can't be easily used. If you must use it, see
include/Support/ThreadPool.h for how.
2. constexpr problems, even after 266588.
3. Move assignment operators can't be defaulted in MSVC2013.
llvm-svn: 266615
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
asynchronous call/handle. Also updates the ORC remote JIT API to use the new
scheme.
The previous version of the RPC tools only supported void functions, and
required the user to manually call a paired function to return results. This
patch replaces the Procedure typedef (which only supported void functions) with
the Function typedef which supports return values, e.g.:
Function<FooId, int32_t(std::string)> Foo;
The RPC primitives and channel operations are also expanded. RPC channels must
support four new operations: startSendMessage, endSendMessage,
startRecieveMessage and endRecieveMessage, to handle channel locking. In
addition, serialization support for tuples to RPCChannels is added to enable
multiple return values.
The RPC primitives are expanded from callAppend, call, expect and handle, to:
appendCallAsync - Make an asynchronous call to the given function.
callAsync - The same as appendCallAsync, but calls send on the channel when
done.
callSTHandling - Blocking call for single-threaded code. Wraps a call to
callAsync then waits on the result, using a user-supplied
handler to handle any callbacks from the remote.
callST - The same as callSTHandling, except that it doesn't handle
callbacks - it expects the result to be the first return.
expect and handle - as before.
handleResponse - Handle a response from the remote.
waitForResult - Wait for the response with the given sequence number to arrive.
llvm-svn: 266581
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
llvm-svn: 264187
The RTDyldMemoryManager::getSymbolAddressInProcess method accepts a
linker-mangled symbol name, but it calls through to dlsym to do the lookup (via
DynamicLibrary::SearchForAddressOfSymbol), and dlsym expects an unmangled
symbol name.
Historically we've attempted to "demangle" by removing leading '_'s on all
platforms, and fallen back to an extra search if that failed. That's broken, as
it can cause symbols to resolve incorrectly on platforms that don't do mangling
if you query '_foo' and the process also happens to contain a 'foo'.
Fix this by demangling conditionally based on the host platform. That's safe
here because this function is specifically for symbols in the host process, so
the usual cross-process JIT looking concerns don't apply.
M unittests/ExecutionEngine/ExecutionEngineTest.cpp
M lib/ExecutionEngine/RuntimeDyld/RTDyldMemoryManager.cpp
llvm-svn: 262657
The resolver uses the fxsave/fxrstor instructions, which require 16-byte
alignment, to save SSE state to the stack. Since 16-byte alignment can't be
assumed on all OSes (and all i386 OSes share this function) - add code to
automatically bump the alignment to 16-bytes on entry to the function.
llvm-svn: 261503
r180893 added an indirect include of llvm/Config/Targets.def to
llvm/Support/CodeGen.h, which in turn is included by things like
llvm/IR/Module.h. After a full build of LLVM and Clang, ninja had to
rebuild 1274 files after reconfiguring.
This commit strips CodeGen.h back down to just a pile of enums and moves
the expensive includes over to CodeGenCWrappers.h (which is only
included in two places). This gets ninja down to 88 files if you
reconfigure with, e.g., -DLLVM_TARGETS_TO_BUILD=X86.
llvm-svn: 260835
This patch adds a new class, OrcI386, which contains the hooks needed to
support lazy-JITing on i386 (currently only for Pentium 2 or above, as the JIT
re-entry code uses the FXSAVE/FXRSTOR instructions).
Support for i386 is enabled in the LLI lazy JIT and the Orc C API, and
regression and unit tests are enabled for this architecture.
llvm-svn: 260338
This patch switches from an unguarded to a guarded loop for eh-frame record
fixups. In the unguarded version we would always make at least one call to
processFDE, which would then crash trying to fix up a frame that didn't exist.
Fixes <rdar://problem/24301582>
llvm-svn: 259103
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
error: field 'CCMgr' will be initialized after field 'IndirectStubsMgr' [-Werror,-Wreorder]
: DL(TM.createDataLayout()), CCMgr(std::move(CCMgr)),
llvm-svn: 258354
they're needed.
Prior to this patch objects were loaded (via RuntimeDyld::loadObject) when they
were added to the ObjectLinkingLayer, but were not relocated and finalized until
a symbol address was requested. In the interim, another object could be loaded
and finalized with the same memory manager, causing relocation/finalization of
the first object to fail (as the first finalization call may have marked the
allocated memory for the first object read-only).
By deferring the loadObject call (and subsequent memory allocations) until an
object file is needed we can avoid prematurely finalizing memory.
llvm-svn: 258185
The cases of this switch are all perfectly regular (except for the first case).
A macro is more readable here.
Thanks to Dave Blaikie for the suggestion.
llvm-svn: 257951
Summary: Since you cannot call finalizeObject manually through the C-API and other functions from the C-API automatically call it, LLVMRunStaticConstructors should also call it or otherwise you cannot call it without first calling a workaround function (or call any other function from the C-API which implicitly finalizes the object).
Reviewers: dnovillo, spatel, bkramer, deadalnix, joker.eph, echristo, lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16188
llvm-svn: 257849
classes.
OrcRemoteTargetClient::RCMemoryManager will now register EH frames with the
server automatically. This allows remote-execution of code that uses exceptions.
llvm-svn: 257816
The new ORC remote-JITing support provides a superset of the old code's
functionality, so we can replace the old stuff. As a bonus, a couple of
previously XFAILed tests have started passing.
llvm-svn: 257343
This patch adds utilities to ORC for managing a remote JIT target. It consists
of:
1. A very primitive RPC system for making calls over a byte-stream. See
RPCChannel.h, RPCUtils.h.
2. An RPC API defined in the above system for managing memory, looking up
symbols, creating stubs, etc. on a remote target. See OrcRemoteTargetRPCAPI.h.
3. An interface for creating high-level JIT components (memory managers,
callback managers, stub managers, etc.) that operate over the RPC API. See
OrcRemoteTargetClient.h.
4. A helper class for building servers that can handle the RPC calls. See
OrcRemoteTargetServer.h.
The system is designed to work neatly with the existing ORC components and
functionality. In particular, the ORC callback API (and consequently the
CompileOnDemandLayer) is supported, enabling lazy compilation of remote code.
Assuming this doesn't trigger any builder failures, a follow-up patch will be
committed which tests these utilities by using them to replace LLI's existing
remote-JITing demo code.
llvm-svn: 257305
This is a more generic version of the MCJITMemoryManager::notifyObjectLoaded
method: It provides only a RuntimeDyld reference (rather than an
ExecutionEngine), and so can be used with ORC JIT stacks.
llvm-svn: 257296
RuntimeDyld::MemoryManager.
The RuntimeDyld::MemoryManager::reserveAllocationSpace method is called when
object files are loaded, and gives clients a chance to pre-allocate memory for
all segments. Previously only the size of each segment (code, ro-data, rw-data)
was supplied but not the alignment. This hasn't caused any problems so far, as
most clients allocate via the MemoryBlock interface which returns page-aligned
blocks. Adding alignment arguments enables finer grained allocation while still
satisfying alignment restrictions.
llvm-svn: 257294
In r255760, I optimized the SectionMemoryManager to make better use
of virtual memory on platforms where the allocation granularity was
bigger than the protection granularity. As part of this, fixing up
the free list became more complicated and was moved into
`applyMemoryGroupPermissions`. Unfortunately, I forgot to actually
remove the call that drops the free list for RO memory (I did
remove the corresponding one for RX memory), defeating the whole
optimization.
llvm-svn: 257293
managers.
Prior to this patch, recursive finalization (where finalization of one
RuntimeDyld instance triggers finalization of another instance on which the
first depends) could trigger memory access failures: When the inner (dependent)
RuntimeDyld instance and its memory manager are finalized, memory allocated
(but not yet relocated) by the outer instance is locked, and relocation in the
outer instance fails with a memory access error.
This patch adds a latch to the RuntimeDyld::MemoryManager base class that is
checked by a new method: RuntimeDyld::finalizeWithMemoryManagerLocking, ensuring
that shared memory managers are only finalized by the outermost RuntimeDyld
instance.
This allows ORC clients to supply the same memory manager to multiple calls to
addModuleSet. In particular it enables the use of user-supplied memory managers
with the CompileOnDemandLayer which must reuse the supplied memory manager for
each function that is lazily compiled.
llvm-svn: 257263
This inlines materializeAll into the only caller
(materializeAllPermanently) and renames materializeAllPermanently to
just materializeAll.
llvm-svn: 256024
Summary: On Windows, the allocation granularity can be significantly
larger than a page (64K), so with many small objects, just clearing
the FreeMem list rapidly leaks quite a bit of virtual memory space
(if not rss). Fix that by only removing those parts of the FreeMem
blocks that overlap pages for which we are applying memory permissions,
rather than dropping the FreeMem blocks entirely.
Reviewers: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15202
llvm-svn: 255760
This class is turning into a useful interface, rather than an implementation
detail, so I'm dropping the 'Base' suffix.
No functional change.
llvm-svn: 254693
Lang Hames