Commit Graph

31 Commits

Author SHA1 Message Date
David Blaikie f55abeaf4c Revert "Revert "PR14606: debug info imported_module support""
This reverts commit r179840 with a fix to test/DebugInfo/two-cus-from-same-file.ll

I'm not sure why that test only failed on ARM & MIPS and not X86 Linux, even
though the debug info was clearly invalid on all of them, but this ought to fix
it.

llvm-svn: 179996
2013-04-22 06:12:31 +00:00
Eric Christopher 0e89ade8ff Revert "PR14606: debug info imported_module support"
This reverts commit r179836 as it seems to have caused test failures.

llvm-svn: 179840
2013-04-19 07:47:16 +00:00
David Blaikie 88564f3cf7 PR14606: debug info imported_module support
Adding another CU-wide list, in this case of imported_modules (since they
should be relatively rare, it seemed better to add a list where each element
had a "context" value, rather than add a (usually empty) list to every scope).
This takes care of DW_TAG_imported_module, but to fully address PR14606 we'll
need to expand this to cover DW_TAG_imported_declaration too.

llvm-svn: 179836
2013-04-19 06:57:04 +00:00
Eric Christopher 52ce7189c1 The .dwo section shouldn't contain the unrelocated values (and
therefore not at all) of the pc or statement list. We also don't
need to emit the compilation dir so save so space and time
and don't bother.

Fix up the testcase accordingly and verify that we don't emit
the attributes or the items that they use.

llvm-svn: 179114
2013-04-09 19:23:15 +00:00
Eric Christopher 55863befd1 DW_FORM_sec_offset should be a relocation on platforms that use
a relocation across sections. Do this for DW_AT_stmt list in the
skeleton CU and check the relocations in the debug_info section.

Add a FIXME for multiple CUs.

llvm-svn: 178969
2013-04-07 03:43:09 +00:00
David Blaikie 5692e72f30 Revert "Adding DIImportedModules to DIScopes."
This reverts commit 342d92c7a0adeabc9ab00f3f0d88d739fe7da4c7.

Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.

llvm-svn: 178215
2013-03-28 02:44:59 +00:00
David Blaikie a26d70358f Adding DIImportedModules to DIScopes.
This is just the basic groundwork for supporting DW_TAG_imported_module but I
wanted to commit this before pushing support further into Clang or LLVM so that
this rather churny change is isolated from the rest of the work. The major
churn here is obviously adding another field (within the common DIScope prefix)
to all DIScopes (files, classes, namespaces, lexical scopes, etc). This should
be the last big churny change needed for DW_TAG_imported_module/using directive
support/PR14606.

llvm-svn: 178099
2013-03-27 00:07:26 +00:00
David Blaikie efb0d65ed7 Debug info: refactor the first field of DICompileUnit to be a raw file/directory pair
This removes the DICompileUnit special case from DIScope.

llvm-svn: 177610
2013-03-20 23:58:12 +00:00
David Blaikie 3b88852a2d Debug Info: Swap the 2nd and 3rd parameters to DICompileUnit to match the common DIScope prefix
llvm-svn: 177595
2013-03-20 22:52:54 +00:00
David Blaikie 43a729d165 Remove unused field in DICompileUnit
llvm-svn: 177590
2013-03-20 22:34:33 +00:00
David Blaikie abec74b38e Move the DIFile operand to DITypes from the 4th operand to the 2nd.
This is another step along the way to making all DIScopes have a common prefix
which can be added to in a general manner to support using directives
(DW_TAG_imported_module).

llvm-svn: 177462
2013-03-19 23:25:22 +00:00
David Blaikie 8fb8224578 Split out filename & directory from DIFile to start generalizing over DIScopes
This is the first step to making all DIScopes have a common metadata prefix (so
that things (using directives, for example) that can appear in any scope can be
added to that common prefix). DIFile is itself a DIScope so the common prefix
of all DIScopes cannot be a DIFile - instead it's the raw filename/directory
name pair.

llvm-svn: 177239
2013-03-17 21:13:55 +00:00
David Blaikie 1ca2f36289 Refactor filename/directory in DICompileUnit into a DIFile
This is the next step towards making the metadata for DIScopes have a common
prefix rather than having to delegate based on their tag type.

llvm-svn: 176913
2013-03-13 00:01:35 +00:00
David Blaikie 452c3ff649 Remove unused "isMain" field from DICompileUnit
llvm-svn: 176910
2013-03-12 22:43:04 +00:00
David Blaikie 47922fb006 Upgrading debug info test cases to be (more) compatible with the current debug info format.
These cases were found by further work to remove support for debug info
versioning. Common cleanups (other than changing the version info in the tag
field) included adding the last parameter to compile_units (recently added for
fission support) and other cases of trailing fields in lexical blocks, compile
units, and subprograms.

llvm-svn: 176834
2013-03-11 22:37:40 +00:00
Eric Christopher dae389bb98 Use getSplitDebugFilename when constructing the skeleton cu and
update testcase accordingly to give the correct name to the cu.

llvm-svn: 175934
2013-02-22 23:50:08 +00:00
Eric Christopher 6a421a944d Add support for testing the output of the abbrev table for the
skeleton CU as part of the DWARF5 split dwarf proposal.

llvm-svn: 174351
2013-02-05 07:32:00 +00:00
Eric Christopher 7a2cdf798b Add support for emitting a stub DW_AT_GNU_dwo_id as part of the
DWARF5 split dwarf proposal.

llvm-svn: 174350
2013-02-05 07:31:55 +00:00
David Blaikie 33111dfea0 Remove the (apparently) unnecessary debug info metadata indirection.
The main lists of debug info metadata attached to the compile_unit had an extra
layer of metadata nodes they went through for no apparent reason. This patch
removes that (& still passes just as much of the GDB 7.5 test suite). If anyone
can show evidence as to why these extra metadata nodes are there I'm open to
reverting this patch & documenting why they're there.

llvm-svn: 174266
2013-02-02 05:56:24 +00:00
Eli Bendersky e6abe83258 Now that llvm-dwarfdump supports flags to specify which DWARF section to dump,
use them in tests that run llvm-dwarfdump. This is in order to make tests as
specific as possible.

llvm-svn: 173498
2013-01-25 21:44:53 +00:00
Eric Christopher e9ec2458e7 Split out DW_OP_addr for the split debug info DWARF5 proposal.
llvm-svn: 172857
2013-01-18 22:11:33 +00:00
Eric Christopher 4c7765f166 Fix the assembly and dissassembly of DW_FORM_sec_offset. Found this by
changing both the string of the dwo_name to be correct and the type of
the statement list.

Testcases all around.

llvm-svn: 172699
2013-01-17 03:00:04 +00:00
Eric Christopher 1826617133 Add the DW_AT_GNU_addr_base for the skeleton cu. Add support for
emitting the dwarf32 version of DW_FORM_sec_offset and correct
disassembler support.

llvm-svn: 172698
2013-01-17 02:59:59 +00:00
Eric Christopher 962c9089d9 Split address information for DWARF5 split dwarf proposal. This involves
using the DW_FORM_GNU_addr_index and a separate .debug_addr section which
stays in the executable and is fully linked.

Sneak in two other small changes:

a) Print out the debug_str_offsets.dwo section.
b) Change form we're expecting the entries in the debug_str_offsets.dwo
   section to take from ULEB128 to U32.

Add tests for all of this in the fission-cu.ll test.

llvm-svn: 172578
2013-01-15 23:56:56 +00:00
Eric Christopher 2cbd5767ad Add support for separating strings for the split debug info DWARF5
proposal. This leaves the strings in the skeleton die as strp,
but in all dwo files they're accessed now via DW_FORM_GNU_str_index.

Add support for dumping these sections and modify the fission-cu.ll
testcase to have the correct strings and form. Fix a small bug
in the fixed form sizes routine that involved out of array accesses
for the table and add a FIXME in the extractFast routine to fix
this up.

llvm-svn: 171779
2013-01-07 19:32:41 +00:00
Eric Christopher da4b2195fc Extend the dumping infrastructure to deal with additional
sections for debug info. These are some of the dwo sections from the
DWARF5 split debug info proposal. Update the fission-cu.ll testcase
to show what we should be able to dump more of now.

Work in progress: Ultimately the relocations will be gone for the
dwo section and the strings will be a different form (as well as
the rest of the sections will be included).

llvm-svn: 171428
2013-01-02 23:52:13 +00:00
Eric Christopher 3bf29fda91 For the dwarf5 split debug info code split out the string section
per compile unit/skeleton compile unit. Update tests accordingly.

llvm-svn: 171133
2012-12-27 02:14:01 +00:00
Eric Christopher 3c5a1914b6 Split out abbreviations for the skeleton info from the rest of
the abbreviations. Part of implementing split dwarf.

llvm-svn: 170589
2012-12-19 22:02:53 +00:00
Eric Christopher c8a310edc1 Refactor out the abbreviation handling into a separate class that
controls each of the abbreviation sets (only a single one at the
moment) and computes offsets separately as well for each set
of DIEs.

No real function change, ordering of abbreviations for the skeleton
CU changed but only because we're computing in a separate order. Fix
the testcase not to care.

llvm-svn: 169793
2012-12-10 23:34:43 +00:00
Eric Christopher cdf218d606 Use the somewhat semantic term "split dwarf" it more matches what's
going on and makes a lot of the terminology in comments make more sense.

llvm-svn: 169758
2012-12-10 19:51:21 +00:00
Eric Christopher 9c2ecd93d0 Add some first skeleton work for the DWARF5 Fission proposal. Emit
part of the compile unit CU and start separating out information into
the various sections that will be pulled out later.

WIP.

llvm-svn: 169061
2012-11-30 23:59:06 +00:00