This works similarly to the {thread/frame/process/target.script:...} feature - you write a summary string, part of which is
${var.script:someFuncName}
someFuncName is expected to be declared as
def someFuncName(SBValue,otherArgument) - essentially the same as a summary function
Since . -> [] are the only allowed separators, and % is used for custom formatting, .script: would not be a legitimate symbol anyway, which makes this non-ambiguous
llvm-svn: 220821
testcases. Also fixed one of the testcases to
not run on the platforms that don't support
Objective-C.
We want to do better with the Objective-C attribute
but we'll do that in a future commit.
llvm-svn: 220820
PseudoTerminal.cpp uses a dummy implementation of posix_openpt for Windows. This
implementation just returns 0. So m_master_fd is 0. But destructor calls 'close'
on m_master_fd. This 'close' calls seems un-necessary as m_master_fd was never
opened in first place and calling 'close' on 0 can have other un-intended
consequences.
I am committing it as obvious as it is only a one-liner. Long term, we may want
to refactor this class.
llvm-svn: 220705
All of these test fixups are prep work for when llgs is
running with llgs for local process debugging, where these
tests fail without the ptracer lock-down suppression.
llvm-svn: 220656
Similar to previous fix, this augments the test inferior to
immediately indicate it may be ptraced by any Linux process
when the appropriate symbols are defined.
This seems to indicate we need to fix our lldb attach logic to
catch when an attach fails, and trigger an appropriate error
instead of the current behavior of hanging indefinitely.
llvm-svn: 220654
HostThreadWindows::Join() did not call the Reset as is done by
the HostThreadPosix::Join(). As a result, future call to
IsJoinable() can fail.
Committed as obvious.
llvm-svn: 220651
Similar to a recent test I fixed for gdb-remote attach scenarios, this
fix is for Linux kernels, such as Ubuntu's stock setup on 11.04-ish and
later, where ptrace starts requiring a ptracer to be an ancestor of the
inferior to be ptraced. This change checks for Linux and the ptrace-related
flags. If they're found, it tries to switch on the "allow any ptracer" mode
for the inferior as the first statements in the program. It's a best-effort
solution - if the prctl call fails, the failure is ignored, and probably will
lead to the test failing.
The ptrace security behavior can be modified system-wide, but is outside the
scope of the test to address. Hence I went with this particular solution.
llvm-svn: 220650
To do this, I fixed the CPPLanguageRuntime::StripNamespacesFromVariableName() function to use a regular expression that correctly determines if the name passed to it is a qualfied C++ name like "a:🅱️:c" or "b::c". The old version of this function was treating '__54-[NSUserScriptTask executeWithInterpreter:arguments::]_block_invoke' as a match with a basename of ']_block_invoke'.
Also fixed a case in the by name lookup of functions where we wouldn't look for the full name if we actually tried to call CPPLanguageRuntime::StripNamespacesFromVariableName() and got an empty basename back.
<rdar://problem/18527866>
llvm-svn: 220432
New functions to give client applications to tools to discover target byte sizes
for addresses prior to ReadMemory. Also added GetPlatform and ReadMemory to the
SBTarget class, since they seemed to be useful utilities to have.
Each new API has had a test case added.
http://reviews.llvm.org/D5867
llvm-svn: 220372
BreakpointLocation::ShouldStop. That worked but wasn't really right,
since there's nothing to guarantee that won't get called more than
once. So this change moves that responsibility to the StopInfoBreakpoint
directly, and then it uses the BreakpointSite to actually do the bumping.
Also fix a test case that was assuming if you had many threads running some
code with a breakpoint in it, the hit count when you stopped would always be
1. Many of the threads could have hit it at the same time...
<rdar://problem/18577603>
llvm-svn: 220358
There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be.
llvm-svn: 220254
r219978 fixed this test to work on Darwin, and removed the expected
failure decorator, but it then started running (and failing) on FreeBSD.
I'd think @dsym_test should skip the test on all non-Darwin operating
systems. It seems not to be the case, so for now skip it the same way as
done for other @dsym_test tests.
llvm-svn: 220219
This fix addresses a requirement on some Linux kernels that limits
a PTRACER to be an ancestor of the ptraced process. The fix in this
case is to have the inferior test exe explicitly allow any ptracer
to attach.
This fixes several ptrace-related issues that I did not see on a modified
kernel we used internally on my team.
See http://reviews.llvm.org/D5846 for details.
This fixes these previously failing tests on stock Ubuntu systems:
FAIL: LLDB (suite) :: TestGdbRemoteProcessInfo.py (Linux vagrant 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64)
FAIL: LLDB (suite) :: TestGdbRemoteAttach.py (Linux vagrant 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64)
FAIL: LLDB (suite) :: TestLldbGdbServer.py (Linux vagrant 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64)
FAIL: LLDB (suite) :: TestGdbRemoteKill.py (Linux vagrant 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64)
llvm-svn: 220181
Issues were:
1 - It isn't good to have more than one listener for the process events, just supply a listener at launch instead of making a one then have the process broadcaster add a new listener
2 - run in async mode
llvm-svn: 220113
function because of a '1u' making it a 32-bit value
when it really needed to be a 64-bit value. Trivial to fix
once I figured out what was going on.
clang static analzyer fixit.
llvm-svn: 220022
unreachable so we don't get warnings about them.
Completely initialize a structure instead of leaving some of its fields
potentially indeterminate (although in reality they would all be set
before use -- but the compiler warning doesn't know that).
clang warning.
llvm-svn: 220017
case. This test case style attempts to shed all
of the boilerplate that is required for test
cases, and let 80% of test cases use a much terser
syntax.
Inline testcases have much simplified python files
(the corresponding .py file should contain two
lines of code) and require no Makefile, because the
Makefile is generated automatically. Breakpoints
are set automatically and the indicated breakpoint
actions (specified after a magic //% comment) are
executed when the breakpoint is hit.
All other testcases are unaffected.
One thing I'm not really happy with yet is the way
multiple actions for the same line are specified.
I'm going to use lang/c/struct_types as a guinea
pig to develop this further.
llvm-svn: 219984
a number of warnings to be enabled. The one making the most noise
across the code base right now is CLANG_WARN_UNREACHABLE_CODE = YES.
llvm-svn: 219910
We've already created a FileSpec based on this local and
this code path would never be executed if it is an invalid
FilePath - but the static analyzer doesn't know this and I
want to placate it.
clang static analyzer fixit.
llvm-svn: 219890
an uninitialized value. In reality the code block that
initializes it and the code block that restores it will always
match up - but the analyzer doesn't know that and I want to
quiet it, so...
clang static analyzer fixit.
llvm-svn: 219869
After the recent migration of code out of Host.cpp, many
unnecessary headers were still being included. This prunes the
include list down to only what is still necessary.
llvm-svn: 219814
Recognise the SHT_NOBITS property in kalimba ELF, and determine this to be
of type zerofilled. Subsequently recognise this type to represent bytes
on the target's DATA address space, and therefore be sized accordingly.
llvm-svn: 219782
in GetFullUnwindPlanForFrame() - the code was mostly checking
that we had an active Process and ABI but not always.
clang static analyzer fixit.
llvm-svn: 219772
This implements Host::LaunchProcess for windows, and in doing so
does some minor refactor to move towards a more modular process
launching design.
The original motivation for this is that launching processes on
windows needs some very windows specific code, which would live
most appropriately in source/Host/windows somewhere. However,
there is already some common code that all platforms use when
launching a process before delegating to the platform specific
stuff, which lives in source/Host/common/Host.cpp which would
be nice to reuse without duplicating.
This commonality has been abstracted into MonitoringProcessLauncher,
a class which abstracts out the notion of launching a process using
an arbitrary algorithm, and then monitoring it for state changes.
The windows specific launching code lives in ProcessLauncherWindows,
and the posix specific launching code lives in ProcessLauncherPosix.
When launching a process MonitoringProcessLauncher is created, and
then an appropriate delegate launcher is created and given to the
MonitoringProcessLauncher.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5781
llvm-svn: 219731
a FileSpec, UUID, and ArchSpec, and it's opening all the kexts
with the same bundle id to see if they're a match, don't set
the Arch in the ModuleSpec. If Module::GetObjectFile() sees
that the architecture of the kext is a mismatch for the arch
we're looking for, it'll spew a warning message to the dev (r217251).
Rely on the UUID match to get the correct file if we have
a UUID -- we'll get no warning if it's a mismatch.
<rdar://problem/18641477>
llvm-svn: 219728
The main issue was if you didn't specify all three (stdin/out/err), you would get file actions added to the launch that would always use the pseudo terminal. This is now fixed.
Also fixed the test suite test that handles IO to test redirecting things individually and all together and in other combinations to make sure we don't regress.
<rdar://problem/18638226>
llvm-svn: 219711
The build fails due to missing asan runtime in the FreeBSD base system.
Instead of marking it expected fail, just skip until we have the runtime
available.
llvm.org/pr21136
llvm-svn: 219701
This addresses this bug:
http://www.llvm.org/bugs/show_bug.cgi?id=21267
Which has been broken since svn r215256 on Aug 8 2014.
DO NOT REVERT THIS COMMIT EVEN IF IT CREATES TEST FAILURES.
The test failures are a result of accumulation of hidden failures
that were masked by the bug this change fixes. Most of our test
runners as part of build testing rely on dotest.py returning non-zero to indicate
some kind of errant test run. Thus, we have been flying blind
since Aug 8 2014.
llvm-svn: 219689
based build since the subdirectories all appear to
have no inter-directory dependencies. This speeds
up parallel makefile builds greatly.
llvm-svn: 219660
after all the commands have been executed except if one of the commands was an execution control
command that stopped because of a signal or exception.
Also adds a variant of SBCommandInterpreter::HandleCommand that takes an SBExecutionContext. That
way you can run an lldb command targeted at a particular target, thread or process w/o having to
select same before running the command.
Also exposes CommandInterpreter::HandleCommandsFromFile to the SBCommandInterpreter API, since that
seemed generally useful.
llvm-svn: 219654
With this change, both local-process llgs and remote-target llgs stdout/stderr
handling from inferior work correctly.
Several log lines have been added around PTY and stdout/stderr redirection
logic on the lldb client side.
Regarding remote llgs execution, see the following:
With these changes, remote llgs with $O now works properly:
$ lldb
(lldb) platform select remote-linux
(lldb) target create ~/some/inferior/exe
(lldb) gdb-remote {some-target}:{port}
(lldb) run
The sequence above will correctly redirect stdout/stderr over gdb-remote $O,
as is needed for remote debugging. That sequence assumes there is a lldb-gdbserver
exe running on the target with {some-host}:{port}.
You can replace the gdb-remote command with a '(lldb) platform connect
connect://{target-ip}:{target-port}'. If you do this and have a
lldb-platform running on the remote end, it will go ahead and launch
llgs for lldb for each target instance that is run/attached.
For local debugging with llgs, the following sequence also works, and
uses local PTYs instead to avoid $O and extra gdb-remote messages:
$ lldb
(lldb) settings set platform.plugin.linux.use-llgs true
(lldb) target create ~/some/inferior/exe
(lldb) run
The above will run the inferior using llgs on the local host, and
will use PTYs rather than $O redirection.
This change also removes the logging that happened after the fork but
before the exec when llgs is launching a new inferior process. Some
aspect of the file handling during that portion of code would not do
the right thing with log handling. We might want to go back later
and have that communicate over a pipe from the child to parent to pass
along any messages that previously were logged in that section of code.
llvm-svn: 219578
Reviewed at http://reviews.llvm.org/D5738
This adds an SB API into SBProcess:
bool SBProcess::IsInstrumentationRuntimePresent(InstrumentationRuntimeType type);
which simply tells whether a particular InstrumentationRuntime (read "ASan") plugin is present and active.
llvm-svn: 219560
Reviewed at http://reviews.llvm.org/D5736
The new test cases for ASan fail if the llvm build that is used with LLDB doesn't have compiler-rt (because the resulting compiler then cannot build with -fsanitize=address). Let's include compiler-rt in build-llvm.pl script and make sure we actually *build* it by removing the NO_RUNTIME_LIBS=1 argument used in the make line. After this, the ASan tests pass on a fresh svn checkout.
llvm-svn: 219555
do that (RunCommandInterpreter, HandleCommands, HandleCommandsFromFile) to gather
the options into an options class. Also expose that to the SB API's.
Change the way the "-o" options to the lldb driver are processed so:
1) They are run synchronously - didn't really make any sense to run the asynchronously.
2) The stop on error
3) "quit" in one of the -o commands will not quit lldb - not the command interpreter
that was running the -o commands.
I added an entry to the run options to stop-on-crash, but I haven't implemented that yet.
llvm-svn: 219553
Reviewed at http://reviews.llvm.org/D5592
This patch gives LLDB some ability to interact with AddressSanitizer runtime library, on top of what we already have (historical memory stack traces provided by ASan). Namely, that's the ability to stop on an error caught by ASan, and access the report information that are associated with it. The report information is also exposed into SB API.
More precisely this patch...
adds a new plugin type, InstrumentationRuntime, which should serve as a generic superclass for other instrumentation runtime libraries, these plugins get notified when modules are loaded, so they get a chance to "activate" when a specific dynamic library is loaded
an instance of this plugin type, AddressSanitizerRuntime, which activates itself when it sees the ASan dynamic library or founds ASan statically linked in the executable
adds a collection of these plugins into the Process class
AddressSanitizerRuntime sets an internal breakpoint on __asan::AsanDie(), and when this breakpoint gets hit, it retrieves the report information from ASan
this breakpoint is then exposed as a new StopReason, eStopReasonInstrumentation, with a new StopInfo subclass, InstrumentationRuntimeStopInfo
the StopInfo superclass is extended with a m_extended_info field (it's a StructuredData::ObjectSP), that can hold arbitrary JSON-like data, which is the way the new plugin provides the report data
the "thread info" command now accepts a "-s" flag that prints out the JSON data of a stop reason (same way the "-j" flag works now)
SBThread has a new API, GetStopReasonExtendedInfoAsJSON, which dumps the JSON string into a SBStream
adds a test case for all of this
I plan to also get rid of the original ASan plugin (memory history stack traces) and use an instance of AddressSanitizerRuntime for that purpose.
Kuba
llvm-svn: 219546
output style can be customized. Change the built-in default to be
more similar to gdb's disassembly formatting.
The disassembly-format for a gdb-like output is
${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>:
The disassembly-format for the lldb style output is
{${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}:
The two backticks in the lldb style formatter triggers the sub-expression evaluation in
CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to
use ' characters instead of ` would work around that.
<rdar://problem/9885398>
llvm-svn: 219544
I don't think on any of the platforms where ObjC matters sizeof(T*) depends on T, so even if we never figured out the pointee type, the pointer type should still be sane
This might also allow some limited inspection where previously none was possible, so a win
llvm-svn: 219540
See http://reviews.llvm.org/D5695 for details.
This change does the following:
Enable lldb-gdbserver (llgs) usage for local-process Linux debugging.
To turn on local llgs debugging support, which is disabled by default, enable this setting:
(lldb) settings set platform.plugin.linux.use-llgs-for-local true
Adds a stream-based Dump() function to FileAction.
Pushes some platform methods that Linux (and FreeBSD) will want to share with MacOSX from PlatformDarwin into PlatformPOSIX.
Reviewed by Greg Clayton.
llvm-svn: 219457
Adds a test to verify that a thread resume request marks the thread as running
after doing the resume callback. This test fails without the corresponding
ThreadStateCoordinator.cpp change.
Fixes the code where that state was not maintained.
llvm-svn: 219412
Also cleans up the lldb Xcode project's Source > Host > posix directory
to use group-relative file naming. Also alphabetizes file entries.
llvm-svn: 219373
This change adds some logging around dynamic loader handling.
It also fixes an issue where the dynamic loader entry breakpoint can end
up being re-inserted, showing the wrong (i.e. software breakpoint) instruction
at the stop location when a backtrace is displayed at program startup.
I discussed with Jim Ingham a few weeks back. Essentially the
one-hit breakpoints need to make it back to public state handling before
the software breakpoint gets cleared. The flow I was hitting was that
the breakpoint would get set, it would get hit, it would get cleared to
step over, then it would get reapplied, when we never wanted it reapplied.
Stops at the beginning of execution would then show backtraces with
software breakpoint instructions in it, erroneously. This change fixes it.
There might be a more elegant way to do this, or a flow change somewhere else
to avoid, but it does fix an issue I experienced in startup breakpoint handling.
llvm-svn: 219371
Python one-line execution was using ConnectionFileDescriptor to do
a non-blocking read against a pipe. This won't work on Windows,
as CFD is implemented using select(), and select() only works with
sockets on Windows.
The solution is to use ConnectionGenericFile on Windows, which uses
the native API to do overlapped I/O on the pipe. This in turn
requires re-implementing Host::Pipe on Windows using native OS
handles instead of the more portable _pipe CRT api.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5679
llvm-svn: 219339
On a suggestion from Jim Ingham, this class allows you to very easily define synthetic child providers that return a synthetic value (in the sense of r219330), but no children
Also, document this new feature in our www docs
llvm-svn: 219337
The way to do this is to write a synthetic child provider for your type, and have it vend the (optional) get_value function.
If get_value is defined, and it returns a valid SBValue, that SBValue's value (as in lldb_private::Value) will be used as the synthetic ValueObject's Value
The rationale for doing things this way is twofold:
- there are many possible ways to define a "value" (SBData, a Python number, ...) but SBValue seems general enough as a thing that stores a "value", so we just trade values that way and that keeps our currency trivial
- we could introduce a new level of layering (ValueObjectSyntheticValue), a new kind of formatter (synthetic value producer), but that would complicate the model (can I have a dynamic with no synthetic children but synthetic value? synthetic value with synthetic children but no dynamic?), and I really couldn't see much benefit to be reaped from this added complexity in the matrix
On the other hand, just defining a synthetic child provider with a get_value but returning no actual children is easy enough that it's not a significant road-block to adoption of this feature
Comes with a test case
llvm-svn: 219330
The build fails due to missing asan runtime in the FreeBSD base system.
Instead of marking it expected fail, just skip until we have the runtime
available.
llvm.org/pr21136
llvm-svn: 219328
the default search method is "always" as of r218405.
For the purposes of this test, set it back to "headers"
to confirm that the file+line breakpoint doesn't work,
then verify that it does work with "always". Leave it
in "always" setting.
<rdar://problem/18564244>
llvm-svn: 219251
the backtrace, try falling back to the architecture default
unwind plan and see if we can backtrace a little further.
<rdar://problem/18556719>
llvm-svn: 219247
that the function we were calling would continue to sleep
for the requested time even if it was interrupted. That is
not true of std::this_thread::sleep_for, at least not on OS X.
Fix the test case so that if it wakes up early, it goes back
to sleep till the time is actually greater than the end point.
<rdar://problem/18523742>
llvm-svn: 219234
- tree items can define any number of key/value pairs
- creating a tree you specify which columns you want to display and it will pick out the right key/value pairs from the new tree item dictionaries
- added new "tk-target" command to explore the target's images, sections, symbols, compile units and line tables.
llvm-svn: 219219
This setting contains the following:
A list containing all the arguments to be passed to the expression parser compiler.
This change also ensures quoted arguments are handled appropriately.
See http://reviews.llvm.org/D5472 for more details.
Change by Tong Shen.
llvm-svn: 219169
This is the first step in getting ConnectionFileDescriptor ported
to Windows. It implements a connection against a disk file for
windows. This supports connection strings of the form file://PATH
which are currently supported only on posix platforms in
ConnectionFileDescriptor.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5608
llvm-svn: 219145
As part of getting ConnectionFileDescriptor working on Windows,
there is going to be alot of platform specific work to be done.
As a result, the implementation is moving into Host. This patch
performs the code move and fixes up call-sites appropriately.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5548
llvm-svn: 219143
Ed Maste