Reduce sleep and time outs in GDB remote testcases to one default value
for each. Stop passing these values around and always use the default
instead.
Differential revision: https://reviews.llvm.org/D83904
Summary:
This code (recently responsible for a unaligned access sanitizer
failure) claims that the string table offset zero should result in an
empty string.
I cannot find any mention of this detail in the Microsoft COFF
documentation, and the llvm COFF parser also does not handle offset zero
specially. This code was introduced in 0076e7159, which also does not go
into specifics, citing "various bugfixes".
Given that this is obviously a hack, and does not cause tests to fail, I
think we should just delete it.
Reviewers: amccarth, markmentovai
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83881
Summary:
With D81784, lld has started debug info resolving relocations to
garbage-collected symbols as -1 (instead of relocation addend). For an
unaware consumer this generated sequences which seemingly wrap the
address space -- their first entry was 0xfffff, but all other entries
were low numbers.
Lldb stores line sequences concatenated into one large vector, sorted by
the first entry, and searched with std::lower_bound. This resulted in
the low-value entries being placed at the end of the vector, which
utterly confused the lower_bound algorithm, and caused it to not find a
match. (Previously, these sequences would be at the start of the vector,
and normally would contain addresses that are far smaller than any real
address we want to look up, so std::lower_bound was fine.)
This patch makes lldb ignore these kinds of sequences completely. It
does that by changing the construction algorithm from iterating over the
rows (as parsed by llvm), to iterating over the sequences. This is
important because the llvm parsed performs validity checks when
constructing the sequence array, whereas the row array contains raw
data.
Reviewers: JDevlieghere, MaskRay
Differential Revision: https://reviews.llvm.org/D83957
Summary:
Currently the frame recognizers are stored in a global list (the list in the
StackFrameRecognizersManagerImpl singleton to be precise). All commands and
plugins that modify the list are just modifying that global list of recognizers
which is shared by all Target and Debugger instances.
This is clearly against the idea of LLDB being usable as a library and it also
leads to some very obscure errors as now multiple tests are sharing the used
frame recognizers. For example D83400 is currently failing as it reorders some
test_ functions which permanently changes the frame recognizers of all
debuggers/targets. As all frame recognizers are also initialized in a 'once'
guard, it's also impossible to every restore back the original frame recognizers
once they are deleted in a process.
This patch just moves the frame recognizers into the current target. This seems
the way everyone assumes the system works as for example the assert frame
recognizers is using the current target to find the function/so-name to look for
(which only works if the recognizers are stored in the target).
Reviewers: jingham, mib
Reviewed By: jingham, mib
Subscribers: MrHate, JDevlieghere
Differential Revision: https://reviews.llvm.org/D83757
Summary:
When we try to find the executable module for our target we don't check
if we already have an executable module set. This causes that when debugging
a program that dlopens another executable, LLDB will take that other executable
as the new executable of the target (which causes that future launches of the
target will launch the dlopen'd executable instead of the original executable).
This just adds a check that we only set the executable when we haven't already
found one.
Fixes rdar://63443099
Reviewers: jasonmolenda, jingham, teemperor
Reviewed By: jasonmolenda, teemperor
Subscribers: jingham, JDevlieghere
Differential Revision: https://reviews.llvm.org/D80724
This test is hitting https://bugs.python.org/issue22393 which results in
the lit multiprocessing pool deadlocking and the reproducer job timing
out on GreenDragon.
Summary:
On macOS 11, the libraries that have been integrated in the system
shared cache are not present on the filesystem anymore. LLDB was
using those files to get access to the symbols of those libraries.
LLDB can get the images from the target process memory though.
This has 2 consequences:
- LLDB cannot load the images before the process starts, reporting
an error if someone tries to break on a system symbol.
- Loading the symbols by downloading the data from the inferior
is super slow. It takes tens of seconds at the start of the
debug session to populate the Module list.
To fix this, we can use the library images LLDB has in its own
mapping of the shared cache. Shared cache images are somewhat
special as their LINKEDIT segment is moved to the end of the cache
and thus the images are not contiguous in memory. All of this can
hidden in ObjectFileMachO.
This patch fixes a number of test failures on macOS 11 due to the
first problem described above and adds some specific unittesting
for the new SharedCache Host utilities.
Reviewers: jasonmolenda, labath
Subscribers: llvm-commits, lldb-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D83023
Template specializations are not handled in many of the
TypeSystemClang methods. For example, GetNumChildren does not handle
the TemplateSpecialization type class, so template specializations
always look like empty objects.
This patch just desugars template specializations in the existing
RemoveWrappingTypes desugaring helper.
Differential Revision: https://reviews.llvm.org/D83858
Summary:
test_terminate_commands is flaky on LLDB Arm buildbot as well. It was already
being skipped for aarch64. I am going to mark it skipped for Arm too.
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81978
Remove custom tearDownHooks from GDB Remote tests as we now cleanup
subprocesses unconditionally. This also changes the termination order to
be the reverse of the creation order. I don't think anything is relying
on that right now, but it better fits the setup/teardown paradigm.
These were found by Clang's new -Wsuggest-override.
This patch doesn't touch any code in unittests/, since much of it intentionally doesn't use override to avoid massive warning spam from -Winconsistent-missing-override due to the use of MOCK_*** macros.
Differential Revision: https://reviews.llvm.org/D83847
Several scripts (two copies of use_lldb_suite.py, and an __init__.py) look for use_lldb_suite_root.py by checking parent directories. If for some reason it doesn't exist, it keeps checking parent directories until it finds it.
However, this only breaks when the parent directory is None, but at least on Linux, dirname('/') == '/', so this will never be None.
This changes the lookup to stop if the dirname(lldb_root) is unchanged. This was previously fixed in 67f6d842fa, but only in one copy of this script.
Additionally, this makes the failure mode more visible -- if the root is not found, it complains loudly instead of silently failing, and having later modules that need lldb_root fail.
Differential Revision: https://reviews.llvm.org/D83840
Remove the forkSubprocess method and its bookkeeping.
TestCreateAfterAttach is the only test using the fork method and I'm not
convinced it adds enough to warrant the maintenance. Pavel suggested the
same thing in D83815.
This reverts commit 29aab9b5c7.
It seems on Windows the file name is just always "lldbsuite.test.lldbtest" for
all tests and that breaks pretty much everything. Reverting until we have
a better solution.
It's possible to achieve the same effect by providing multi-step recipe
instead of a single-step recipe where the step happens to contain
multiple commands.
It served a puprose while we were using the test name to provide a name
for the created file. Now that the files are created in memory, we don't
need that.
Summary:
Currently expect_expr will not run the expression if no target is selected. This
patch changes this behavior so that expect_expr will instead fall back to the
dummy target similar to what the `expression` command is doing. This way we
don't have to compile an empty executable to be able to use `expect_expr` (which
is a waste of resources for tests that just test generic type system features).
As a test I modernized the TestTypeOfDeclTypeExpr into a Python test +
expect_expr (as it relied on the dummy target fallback of the expression
command).
Reviewers: labath, JDevlieghere
Reviewed By: labath
Subscribers: abidh
Differential Revision: https://reviews.llvm.org/D83388
Summary:
From what I know we already have the restriction that every test in the test
suite needs to have a unique file name as that's used for generating the unique
build directory for a test. It seems there is also a restriction that every test
case class in the test suite needs to have a unique name as that's used to
generate the unique log file name for the test run.
This changes the log file format to use the basename of the test file instead so
that we only have to keep worrying about the 'unique file name' restriction from
now on.
This came up because I started naming the test classes "TestCase" (as repeating
the file name in the test class seems like redudant information that just makes
renaming tests a pain).
Reviewers: labath, JDevlieghere
Reviewed By: labath
Subscribers: mgorny, abidh
Differential Revision: https://reviews.llvm.org/D83767
Summary:
Certain `NSDate` constructors return a special `NSConstantDate` class which
currently ends up being unformatted as it's not in the list of supported classes
for the NSDate formatter. This patch adds that class to the supported class list
so LLDB produces a summary for it.
One of these special constructors is `[NSDate distantPast]` which returns the
date for `0001-01-01 00:00:00 UTC`. LLDB has a special case for formatting this
date but for some reason we did hardcode the wrong summary string in that
special case. Maybe the summary string was correct back when the code was
written but it isn't correct anymore (`distantPast` isn't actually defined to be
a special date but just some 'a guaranteed temporal boundary.' so maybe someone
changed the value in the last 10 years).
If someone else is wondering why we even have this special case for
`distantPast` but not for the future. The reason seems to be that our date
formatting for really old dates is off by 24 hours. So for example, adding one
second to `distantPast` will cause LLDB to print `0000-12-30 00:00:01 UTC`
(which is 24 hours behind the expected result). So to make our code appear to be
correct it seems we just hardcoded the most common NSDate result from that time
span. I'll replace that logic with a generic solution in a probably more
invasive follow up patch.
I also took the freedom to replace the magic value `-63114076800` with some
constant + documentation. I heard there are some people that don't know from the
top of their head that there are 63114076800 seconds between 1. Jan 0001 and 1.
January 2001 in whatever calendar system NSDate is using.
Reviewers: mib, davide
Reviewed By: mib
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D83217
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
the form that takes func as an argument isn't compatible with the
optional bugnumber argument. This means that only correct for to use it is now
@skipIfRosetta(bugnumber='url')
Always clean up subprocesses on tear down instead of relying on the
caller to do so. This is not only less error prone but also means the
tests can be more concise.
Differential revision: https://reviews.llvm.org/D83787
- Make the open more Pythonic.
- Remove the unused `cleanup` Make target.
- Remove commented-out/obvious/low-value comments.
- Cleanup the forked process PID list.
Skip TestProcessConnect.py on Windows and Android (the same platforms as
TestPlatformProcessConnect.py) and mark it as a NO_DEBUG_INFO test so we
don't run all the variants.
Summary:
This patch extends the ModuleSpec class to include a
DataBufferSP which contains the module data. If this
data is provided, LLDB won't try to hit the filesystem
to create the Module, but use only the data stored in
the ModuleSpec.
Reviewers: labath, espindola
Subscribers: emaste, MaskRay, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83512
In synchronous mode, the process connect command and its aliases should
wait for the stop event before claiming the command is complete.
Currently, the stop event is always handled asynchronously by the
debugger.
The implementation takes the same approach as Process::ResumeSynchronous
which hijacks the event and handles it on the current thread. Similarly,
after this patch, the stop event is part of the command return object,
which is the property used by the test case.
Differential revision: https://reviews.llvm.org/D83728
Summary: Just unifying all that copy-pasted code.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D83662
The glob expression for a test called "test" could match a log file for
a the test "test_foo". Instead of globbing, maintain an explicit list of
log files relevant to the current test.
It was failing because some module events had empty UUID, and that was not handled correctly.
The diff that added that logic is https://reviews.llvm.org/D82477
Original commit c60216db15.
The test can only run on Darwin because of how it was setup, so I'm
enforcing that.
Summary:
Test Plan:
Reviewers:
Subscribers:
Tasks:
Tags:
This allows skipping a test when running the testsuite on macOS under
the Rosetta translation layer.
Differential Revision: https://reviews.llvm.org/D83600
The function's reliance on host types meant that it was needlessly
complicated, and did not handle the newer (wider) types. Rewrite it in
terms of APInt/APFloat functions to save code and improve functionality.
Summary:
My understanding is that this was added to make dotest interact well
with the GreenDragon bots, back when dotest was the main test driver.
Now that everything goes through lit (which has its own xunit
formatter), it seems largely irrelevant.
There are more cleanups that can be done after removing this be done
here, but this should be enough to test the waters.
Reviewers: JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83545
There is a local 'class_language' veriable in DWARFASTParserClang which is named
as if it is related to the 'class_language' member of ParsedDWARFTypeAttributes.
However, it actually only has two possible enum values: 'ObjC' (which means the
current record is a Objective-C class) or 'Unknown' (which covers all other
cases).
This is confusing for the reader and also lead to some strange code where we
have several comparisons against the value "ObjC_plus_plus" (which is always
false).
This replaces the variable with either a const bool variable (if there are
multiple checks for that condition in a function) or a direct call to the
TypeSystemClang utility method for checking if it's a Objective-C
Object/Interface type.
For some reason this works on the original author's machine, but not on my. So I'm using a safer approach of using an unstripped dynamic library to place breakpoints on. The author was placing a breakpoint on the main symbol of a stripped library and for some reason it worked on their machine, but it shouldn't have...
Offender diff: D82477
Summary: User can expand and check compile unit list for the modules that have debug info.
Reviewers: wallace, clayborg
Reviewed By: clayborg
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83072
Summary:
Whenever a module is created, removed or changed, lldb-vscode is now sending an event that can be interpreted by the IDE so that modules can be rendered in the IDE, like the tree view in this screenshot
{F12229758}
Reviewers: wallace, clayborg, kusmour, aadsm
Reviewed By: clayborg
Subscribers: cfe-commits, labath, lldb-commits
Tags: #lldb, #clang
Differential Revision: https://reviews.llvm.org/D82477
This patch does several things that are all closely related:
- It introduces a new YamlRecorder as a counterpart to the existing
DataRecorder. As the name suggests the former serializes data as yaml
while the latter uses raw texts or bytes.
- It introduces a new MultiProvider base class which can be backed by
either a DataRecorder or a YamlRecorder.
- It reimplements the CommandProvider in terms of the new
MultiProvider.
Finally, it adds unit testing coverage for the MultiProvider, a naive
YamlProvider built on top of the new YamlRecorder and the existing
MutliLoader.
Differential revision: https://reviews.llvm.org/D83441
Summary:
This fixes an override issue by marking a function as const so that the
signature maps to the signature of the function in the base class.
This is the original error:
In file included from /root/llvm/lldb/source/Plugins/Process/Linux/NativeRegisterContextLinux_s390x.cpp:11:
/root/llvm/lldb/source/Plugins/Process/Linux/NativeRegisterContextLinux_s390x.h:79:10: error: 'size_t lldb_private::process_linux::NativeRegisterContextLinux_s390x::GetGPRSize()' marked 'override', but does not override
79 | size_t GetGPRSize() override { return sizeof(m_regs); }
| ^~~~~~~~~~
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83580
The problem is that synthetic value objects can sometimes represent objects in target memory, and other times they might be made up wholly in lldb memory, with pointers from one synthetic object to another, and so the ValueObjectVariable computation was not appropriate.
This patch delegates the computation to the root of the ValueObject in question. That solves the problem for ValueObjectVariable while not messing up the computation for ValueObjectConstResult or ValueObjectSynthetic.
Differential Revision: https://reviews.llvm.org/D83450
Change the code the use the version which accepts a memory buffer,
instead of the one taking a file name.
This ensures we are not loading the file into memory twice
(ObjectFilePECOFF also loads a copy), reducing our memory footprint, as
well as enabling additional goodies in the future, like being able to
open files which don't exist on disk (D83512).
This patch updates ARM64_ehframe_Registers.h and ARM64_DWARF_Registers.h
with latest register numbers in line with AArch64 SVE support.
For refernce take a look at "DWARF for the ARM® 64-bit Architecture (AArch64)
with SVE support" manual from Arm.
Version used: abi_sve_aadwarf_100985_0000_00_en.pdf
NativeProcessELF::GetELFImageInfoAddress<...>() is declared in NativeProcessELF.h, but only defined in NativeProcessELF.cpp. Via some optimized builds (e.g. thinlto), this instantiation may be removed when it is used in a different TU (NativeProcessELFTest.cpp).
Summary:
-debug-info-kind=constructor reduces the amount of class debug info that
is emitted; this patch switches to using this as the default.
Constructor homing emits the complete type info for a class only when the
constructor is emitted, so it is expected that there will be some classes that
are not defined in the debug info anymore because they are never constructed,
and we shouldn't need debug info for these classes.
I compared the PDB files for clang, and there are 273 class types that are defined with `=limited`
but not with `=constructor` (out of ~60,000 total class types).
We've looked at a number of the types that are no longer defined with =constructor. The vast
majority of cases are something like class A is used as a parameter in a member function of
some other class B, which is emitted. But the function that uses class A is never called, and class A
is never constructed, and therefore isn't emitted in the debug info.
Bug: https://bugs.llvm.org/show_bug.cgi?id=46537
Subscribers: aprantl, cfe-commits, lldb-commits
Tags: #clang, #lldb
Differential Revision: https://reviews.llvm.org/D79147
There are bugs where you don't want the signal handler to trigger, most
notably when that will cause another crash. Examples of this are lldb
running out of memory or a bug in the reproducer generation code. This
adds an escape hatch trough a (developer oriented) flag to not install
the signal handler.
rdar://problem/65149595
Differential revision: https://reviews.llvm.org/D83496
This is a preparatory rename of the developer facing reproducer flags.
reproducer-skip-version-check -> reproducer-no-version-check
reproducer-auto-generate -> reproducer-generate-on-quit
Summary:
DWARF-parsing methods in SymbolFileDWARF which update module state
typically take the module lock. ParseCallEdgesInFunction doesn't do
this, but higher-level locking within lldb::Function (which owns the
storage for parsed call edges) is necessary.
The lack of locking could explain some as-of-yet unreproducible crashes
which occur in Function::GetTailCallingEdges(). In these crashes, the
`m_call_edges` vector is non-empty but contains a nullptr, which
shouldn't be possible. (If this vector is non-empty, it _must_ contain a
non-null unique_ptr.)
This may address rdar://55622443 and rdar://65119458.
Reviewers: jasonmolenda, friss, jingham
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83359
This patch fixes debugserver incorrectly returning the SDK version
instead of the minimum deployment target version.
rdar://problem/65001691
Differential Revision: https://reviews.llvm.org/D83443
This is an NFC cleanup for Clang, and a bugfix for the Swift
branch. In swift-lldb one target may have multiple scratch
TypeSystems, so it is important to pick the one that belongs to the
current frame, rather than the one for the current target.
<rdar://problem/65001402>
Currently the ItaniumRecordLayoutBuilder when laying out base classes has the virtual
and non-virtual bases mixed up when pulling the base class layouts from the external source.
This came up in an LLDB bug where on arm64 because of differences in how it deals with
tail padding would layout the bases differently without the correct layout from the
external source (LLDB). This would result in some fields being off by 4 bytes.
Differential Revision: https://reviews.llvm.org/D83008
Summary:
This function was documented to overwrite entries with D76111, which was
adding a couple of similar functions. However, this function (unlike the
functions added in that patch) was/is not actually overwriting variables
-- any pre-existing variables would get ignored.
This behavior does not seem to be intentional. In fact, before the refactor in
D41359, this function could introduce duplicate entries, which could
have very surprising effects both inside lldb and on other applications
(some applications would take the first value, some the second one; in
lldb, attempting to unset a variable could make the second variable
become active, etc.).
Overwriting seems to be the most reasonable behavior here, so change the
code to match documentation.
Reviewers: clayborg, wallace, jingham
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83306
Summary:
These two tests are flaky on lldb Arm buildbot as well. They are already
being skipped for aarch64. I am going to mark them skipped for Arm.
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81978
This gets rid of some surprising interplay between the flags.
Mainly needed because of Rosetta debugserver & Apple Silicon.
Differential Revision: https://reviews.llvm.org/D82804
This patch fixes a crash that is happening because of a null pointer
dereference in SBFrame.
StackFrame::GetRegisterContext says explicitly that you might not get
a valid RegisterContext back but the pointer wasn't tested before,
resulting in crashes. This should solve the issue.
rdar://54462095
Differential Revision: https://reviews.llvm.org/D83343
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Summary:
This patch adds some cosmetic changes to LLDB AArch64 register infos macros in order to use them in SVE register infos struct in follow up patches.
This patch initially added invalidate lists to register infos struct but that is no longer needed and problem disappeared after updating qemu testing environment.
old headline comments for reference:
AArch64 reigster X and V registers are primary GPR and vector registers respectively. If these registers are modified their corresponding children w regs or s/d regs should be invalidated. Specially when a register write fails it is important that failure gets reflected to all the registers which draw their value from a particular value register.
Reviewers: labath, rengolin
Reviewed By: labath
Subscribers: tschuett, kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77045
The patch fixes a crash in ValueObject::CreateChildAtIndex caused by a
null pointer dereferencing. This is a corner case that is happening when
trying to dereference a variable with an incomplete type, and this same
variable doesn't have a synthetic value to get the child ValueObject.
If this happens, lldb will now return a null pointer that will results
in an error message.
rdar://65181171
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Somehow UBSan would only report the unaligned load in TestLinuxCore.py
when running the tests with reproducers. This patch fixes the issue by
using a memcpy in the GetDouble and the GetFloat method.
Differential revision: https://reviews.llvm.org/D83256
Summary:
This patch aims to combine similar arm64 register set definitions defined in NativeRegisterContextLinux_arm64 and RegisterContextPOSIX_arm64.
I have implemented a register set interface out of RegisterInfoInterface class and moved arm64 register sets into RegisterInfosPOSIX_arm64 which is similar to Utility/RegisterContextLinux_* implemented by various other targets. This will help in managing register sets of new ARM64 architecture features in one place.
Built and tested on x86_64-linux-gnu, aarch64-linux-gnu and arm-linux-gnueabihf targets.
Reviewers: labath
Reviewed By: labath
Subscribers: mhorne, emaste, kristof.beyls, atanasyan, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D80105
These functions were doing a bitcast on the float value, which is not
consistent with the other getters, which were doing a numeric conversion
(47.0 -> 47). Change these to do numeric conversions too.
Even non-remote targets may need to set the launch environment
((DY)LD_LIBRARY_PATH, specifically) to run successfully.
Also, add an assertion to better detect the case when launching a target
fails and the breakpoint is never hit.
io.BytesIO seems to produce a stream in Python 2 which isn't recognized
as a file object in the SWIG API, so this test fails for Python 2 (and I assume
also an old SWIG version needs to be involved).
Instead just open an empty input file which is a file object in all Python
versions to make this test pass everywhere.
Summary:
Unify the code for requiring a complete type and move it into a single
place. The only functional change is that the "cannot start a definition
of an incomplete type" is upgrated from a runtime error/warning to an
lldbassert. An plain assert might also be fine, since (AFAICT) this can
only happen in case of a programmer error.
Reviewers: teemperor, aprantl, shafik
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83199
Summary:
When printing an NSDate (for example with `NSLog` or `po`) the seconds value is
always rounded down. LLDB's own formatter however isn't following that behaviour
which leads to situations where the formatted result is sometimes one second
off. For example:
```
(lldb) p [NSDate dateWithTimeIntervalSince1970:0.1]
(__NSTaggedDate *) $1 = [...] 1970-01-01 00:00:01 UTC
(lldb) po [NSDate dateWithTimeIntervalSince1970:0.1]
1970-01-01 00:00:00 +0000
(lldb) p [NSDate dateWithTimeIntervalSince1970:0.6]
(__NSTaggedDate *) $4 =[...] 1970-01-01 00:00:01 UTC
(lldb) po [NSDate dateWithTimeIntervalSince1970:0.6]
1970-01-01 00:00:00 +0000
```
This patch just always rounds down the seconds value we get from the NSDate
object.
Fixes rdar://65084800
Reviewers: mib, davide
Reviewed By: mib
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D83221
With -flimit-debug-info, we can have a definition of a class, but no
definition for some of its members. This extends the same logic we were
using for incomplete base classes to cover incomplete members too.
Test forward-declarations.s is removed as it is no longer applicable --
we don't warn anymore when encountering incomplete members as they could
be completed elsewhere. New checks added to TestLimitDebugInfo cover the
handling of incomplete members more thoroughly.
A lot of the methods handle all integral and all floating point types
the same way. They can be changed to switch on the category of the type,
instead of the actual type, saving a lot of boilerplate.
This patch does that for the methods where I could be reasonably certain
of their expected semantics.
In general there is no way to get to the ASTContext from most AST nodes
(Decls are one of the exception). This will be a problem when implementing
the rest of APValue::dump since we need the ASTContext to dump some kinds of
APValues.
The ASTContext* in ASTDumper and TextNodeDumper is not always non-null.
This is because we still want to be able to use the various dump() functions
in a debugger.
No functional changes intended.
Reverted in fcf4d5e449 since a few dump()
functions in lldb where missed.
Summary:
When tabbing to complete LLDB commands in REPL, characters would at best be
missing but at worst cause the REPL to crash due to out of range string access.
This patch appends the command character to the completion results to fulfill
the assumption that all matches are prefixed by the request's cursor argument
prefix.
Bug report for the Swift REPL
https://bugs.swift.org/browse/SR-12867
Reviewers: teemperor
Reviewed By: teemperor
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D82835
Summary:
The Scalar class claims to follow the C type conversion rules. This is
true for the Promote function, but it is not true for the implicit
conversions done in the getter methods.
These functions had a subtle bug: when extending the type, they used the
signedness of the *target* type in order to determine whether to do
sign-extension or zero-extension. This is not how things work in C,
which uses the signedness of the *source* type. I.e., C does
(sign-)extension before it does signed->unsigned conversion, and not the
other way around.
This means that: (unsigned long)(int)-1
is equal to (unsigned long)0xffffffffffffffff
and not (unsigned long)0x00000000ffffffff
Unsurprisingly, we have accumulated code which depended on this
inconsistent behavior. It mainly manifested itself as code calling
"ULongLong/SLongLong" as a way to get the value of the Scalar object in
a primitive type that is "large enough". Previously, the ULongLong
conversion did not do sign-extension, but now it does.
This patch makes the Scalar getters consistent with the declared
semantics, and fixes the couple of call sites that were using it
incorrectly.
Reviewers: teemperor, JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D82772
This complements the existing TestLimitDebugInfo.py, which tests this
scenario more comprehensively, but is not able to run on all hosts.
Specifically, it's hard to trigger this code from windows because clang
tries hard to ensure that debug info for types marked with
__declspec(dllexport) is emitted even under -flimit-debug-info (and
dllexport is needed to use a type across shared libraries).
This assembly-based test serves two purposes:
- it tests that -flimit-debug-info code path works for windows binaries
(even though the aforementioned feature means its less likely to be
used there)
- it gives basic test coverage for the -flimit-debug-info handling code
when running the test suite on windows hosts.
The test does not work on windows, because clang will emit full type
information for __declspec(dllexport) types even under
-flimit-debug-info. __declspec(dllexport) is needed to be able to use
the type across shared library boundaries on windows, which makes this a
pretty good heuristic, but defeats the purpose of this test.
I am going to create (in another patch) an basic assembly test, so that
the relevant code gets at least some coverage on windows hosts.
This also reverts commit 1276855f2b, which
added the __declspec annotations -- they are not necessary anymore, and
they needlessly complicate the test.
The passthrough DiagnosticConsumer is an implementation detail of
ClangDiagnosticManagerAdapter and we can just hide it behind the normal
DiagnosticConsumer interface that ClangDiagnosticManagerAdapter is supposed
to implement.
On macOS 11, system libraries which are part of the shared cache
are not present on the filesystem anymore. This causes issues
with build.py, because it fails to link binaries with libSystem
or libc++.
The real issue is that build.py was not passing an SDK to the
compiler. The script accepts an argument for the SDK, but it
is currently unused. This patch just threads the SDK through
to the compile and link steps and this fixes a bunch of Shell
test failures on very recent macOS builds.
On macOS 11 (and other aligned OSs), the shared cache method
lists get an additional optimization which removes one level
of indirection to get to the selector.
This patch supports this new optimization. Both codepaths are
covered byt the existing Objective-C tests.
On macOS 11 (and other aligned Apple OSs), the Objective-C runtime
has a new optimization which saves memory by making the method
lists smaller.
This patch adds support for this new method list encoding (while
also keeping backward compatibility). This is implicitely covered
by some existing Objective-C tests.
This reverts commit 0da0437b2a to unbreak
the following tests:
lldb-api.tools/lldb-server.TestAppleSimulatorOSType.py
lldb-api.tools/lldb-server.TestGdbRemoteAttach.py
lldb-api.tools/lldb-server.TestGdbRemoteProcessInfo.py
lldb-api.tools/lldb-server.TestGdbRemoteRegisterState.py
lldb-api.tools/lldb-server.TestGdbRemoteThreadsInStopReply.py
lldb-api.tools/lldb-server.TestLldbGdbServer.py
Summary:
This replaces the current use of LLDB's own `StringConvert` with LLVM's
`to_integer` which has a less error-prone API and doesn't use special 'error
values' to designate parsing problems.
Where needed I also added missing error handling code that prints a parsing
error instead of continuing with the error value returned from `StringConvert`
(which either gave a cryptic error message or just took the error value
performed an incorrect action with it. For example, `frame recognizer delete -1`
just deleted the frame recognizer at index 0).
Reviewers: #lldb, labath
Reviewed By: labath
Subscribers: labath, abidh, JDevlieghere
Differential Revision: https://reviews.llvm.org/D82297
The formatter was requesting an unsigned integer from the ValueObject,
but CFAbsoluteTime is a signed double, so in the NSDate test the formatter
actually just printed the 'error value' date which is the Cocoa epoch. This
started failing after the recent Scalar changes.
This patch just changes the logic to use a signed value which fits to the data
we try to read and avoids this issue.
Summary:
This patch adds support for evaluation of expressions referring to types
which were compiled in -flimit-debug-info (a.k.a -fno-standalone-debug)
in clang. In this mode it's possible that the debug information needed
to fully describe a c++ type is not present in a single shared library
-- for example debug info for a base class or a member of a type can
only be found in another shared library. This situation is not
currently handled well within lldb as we are limited to searching within
a single shared library (lldb_private::Module) when searching for the
definition of these types.
The way that this patch gets around this limitation is by doing the
search at a later stage -- during the construction of the expression ast
context. This works by having the parser (currently SymbolFileDWARF, but
a similar approach is probably needed for PDBs too) mark a type as
"forcefully completed". What this means is that the parser has marked
the type as "complete" in the module ast context (as this is necessary
to e.g. derive classes from it), but its definition is not really there.
This is done via a new field on the ClangASTMetadata struct.
Later, when we are importing such a type into the expression ast, we
check this flag. If the flag is set, we try to find a better definition
for the type in other shared libraries. We do this by initiating a
new lookup for the "forcefully completed" classes, which then imports the
type from a module with a full definition.
This patch only implements this handling for base classes, but other
cases (members, array element types, etc.). The changes for that should
be fairly simple and mostly revolve around marking these types as
"forcefully completed" at an approriate time -- the importing logic is
generic already.
Another aspect, which is also not handled by this patch is viewing these
types via the "frame variable" command. This does not use the AST
importer and so it will need to handle these types on its own -- that
will be the subject of another patch.
Differential Revision: https://reviews.llvm.org/D81561
This patch improves the error reporting for SBBreakpoint::AddName by
adding a new method `SBBreakpoint::AddNameWithErrorHandling` that returns
a SBError instead of a boolean.
This way, if the breakpoint naming failed in the backend, the client
(i.e. Xcode), will be able to report the reason of that failure to the
user.
rdar://64765461
Differential Revision: https://reviews.llvm.org/D82879
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch improves the error reporting for SBBreakpoint::AddName by
adding a new method `SBBreakpoint::AddNameWithErrorHandling` that returns
a SBError instead of a boolean.
This way, if the breakpoint naming failed in the backend, the client
(i.e. Xcode), will be able to report the reason of that failure to the
user.
rdar://64765461
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
The refactor in 48ca15592f reintroduced UB when converting out-of-bounds
floating point numbers to integers -- the behavior for ULongLong() was
originally fixed in r341685, but did not survive my refactor because I
based my template code on one of the methods which did not have this
fix.
This time, I apply the fix to all float->int conversions, instead of
just the "double->unsigned long long" case. I also use a slightly
simpler version of the code, with fewer round-trips
(APFloat->APSInt->native_int vs
APFloat->native_float->APInt->native_int).
I also add some unit tests for the conversions.
Condition `omit_empty_base_classes` is checked both in an outer and
in an inner `if` statement in `TypeSystemClang::GetNumBaseClasses()`.
This patch removes the redundant inner check.
The issue was found using `clang-tidy` check under review
`misc-redundant-condition`. See https://reviews.llvm.org/D81272.
Differential Revision: https://reviews.llvm.org/D82559
Condition `auto_advance_pc` is checked both in an outer and in an
inner `if` statement in `EmulateInstructionARM::EvaluateInstruction()`,
`EmulateInstructionARM64::EvaluateInstruction()` and
`EmulateInstructionPPC64::EvaluateInstruction()`. This patch removes the
redundant inner check.
The issue was found using `clang-tidy` check under review
`misc-redundant-condition`. See https://reviews.llvm.org/D81272.
Differential Revision: https://reviews.llvm.org/D82558
Fix UBSan error detected in TestDataFormatterObjCCF.py and
TestDataFormatterObjCNSDate.py:
Scalar.cpp:698:27: runtime error: -4.96303e+08 is outside the range of
representable values of type 'unsigned long long'.
debugserver and lldb
This patch improves the heuristics for correctly identifying simulator binaries on Darwin and adds support for simulators running on Apple Silicon.
rdar://problem/64046344
Differential Revision: https://reviews.llvm.org/D82616
The `frame recognizer` command only exists when Python scripting is
enabled. Therefore the test should be made conditional on Python.
Without it, the test fails with "'frame recognizer' is not a known
command."
Summary:
A lot of our tests do 'self.assertTrue(error.Success()'. The problem
with that is that when this fails, it produces a completely useless
error message (False is not True) and the most important piece of
information -- the actual error message -- is completely hidden.
Sometimes we mitigate that by including the error message in the "msg"
argument, but this has two additional problems:
- as the msg argument is evaluated unconditionally, one needs to be
careful to not trigger an exception when the operation was actually
successful.
- it requires more typing, which means we often don't do it
assertSuccess solves these problems by taking the entire SBError object
as an argument. If the operation was unsuccessful, it can format a
reasonable error message itself. The function still accepts a "msg"
argument, which can include any additional context, but this context now
does not need to include the error message.
To demonstrate usage, I replace a number of existing assertTrue
assertions with the new function. As this process is not easily
automatable, I have just manually updated a representative sample. In
some cases, I did not update the code to use assertSuccess, but I went
for even higher-level assertion apis (runCmd, expect_expr), as these are
even shorter, and can produce even better failure messages.
Reviewers: teemperor, JDevlieghere
Subscribers: arphaman, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D82759
Summary:
The ClangASTSource has a lock that globally disables all lookups into the
external AST source when we explicitly "guarded" copy a type. It's not used for
anything else, so importing declarations or importing types that are
dependencies of a declaration actually won't activate that lock. The lookups it
is supposed to prevent also don't actually happen in our test suite. The check
in `ClangExpressionDeclMap::FindExternalVisibleDecls` is never executed and the
check in the `ClangASTSource::FindExternalVisibleDeclsByName` is only ever
reached by the `Import-std-module` tests (which explicitly do a lookup into the
expression context on purpose).
This lock was added in 6abfabff61 as a replacement
for a list of types we already looked up which appeared to be an optimisation
strategy. I assume back then this lock had a purpose but these days the
ASTImporter and LLDB seem to be smart enough to avoid whatever lookups this
tried to prevent.
I would say we remove it from LLDB. The main reason is that it blocks D81561
(which explicitly does a specific lookup to resolve placeholder types produced
by `-flimit-debug-info`) but it's semantics are also very confusing. The naming
implies it's a flag to indicate when we import something at the moment which is
practically never true as described above. Also the fact that it makes our
ExternalASTSource alternate between doing lookups into the debug info and
pretending it doesn't know any external decls could really break our lookup in
some weird way if Clang decides to cache a fake empty lookup result that was
generated while the lock was active.
Reviewers: labath, shafik, JDevlieghere, aprantl
Reviewed By: labath, JDevlieghere, aprantl
Subscribers: aprantl, abidh
Differential Revision: https://reviews.llvm.org/D81749
'InitialLength' is replaced with 'Format' (DWARF32 by default) and 'Length' in this patch.
Besides, test cases for DWARFv4 and DWARFv5, DWARF32 and DWARF64 is
added.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D82622
The test fails on Darwin because a different Asynchronous UnwindPlan is
chosen:
Asynchronous (not restricted to call-sites) UnwindPlan is 'assembly
insn profiling'`
instead of what the test expects:
Asynchronous (not restricted to call-sites) UnwindPlan is 'eh_frame
CFI'
Summary:
This fixes a bug in the logic for choosing the unwind plan. Based on the
comment in UnwindAssembly-x86, the intention was that a plan which
describes the function epilogue correctly does not need to be augmented
(and it should be used directly). However, the way this was implemented
(by returning false) meant that the higher level code
(FuncUnwinders::GetEHFrameAugmentedUnwindPlan) interpreted this as a
failure to produce _any_ plan and proceeded with other fallback options.
The fallback usually chosed for "asynchronous" plans was the
"instruction emulation" plan, which tended to fall over on certain
functions with multiple epilogues (that's a separate bug).
This patch simply changes the function to return true, which signals the
caller that the unmodified plan is ready to be used.
The attached test case demonstrates the case where we would previously
fall back to the instruction emulation plan, and unwind incorrectly --
the test asserts that the "augmented" eh_frame plan is used, and that
the unwind is correct.
Reviewers: jasonmolenda, jankratochvil
Subscribers: davide, echristo, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D82378
This function was implementing c-like promotion rules by switching on
the both types. C promotion rules are complicated, but they are not
*that* complicated -- they basically boil down to:
- wider types trump narrower ones
- unsigned trump signed
- floating point trumps integral
With a couple of helper functions, we can rewrite the function in terms
of these rules and greatly reduce the size and complexity of this
function.
Although this issue is not specific to macOS, Python (in)compatibility
comes up quite often and we've been linking users to this page. This
just adds more details for this particular scenario.
Differential revision: https://reviews.llvm.org/D82507
This patch takes the IO redirection logic from ScriptInterpreterPython
and moves it into the interpreter library so that it can be used by
other script interpreters. I've turned it into a RAII object so that we
don't have to worry about cleaning up in the calling code.
Differential revision: https://reviews.llvm.org/D82396
This function was modifying and returning pointers to static storage,
which meant that any two accesses to different Scalar objects could
potentially race (depending on which types the objects were storing and
the host endianness).
In the new version the user is responsible for providing a buffer into
which this method will store its binary representation. The main caller
(RegisterValue::GetBytes) already has one such buffer handy, so this did
not require any major rewrites.
To make that work, I've needed to mark the RegisterValue value buffer
mutable -- not an ideal solution, but definitely better than modifying
global storage. This could be further improved by changing
RegisterValue::GetBytes to take a buffer too.
Summary:
When evaluating an expression referencing a constexpr static member variable, an
error is issued because the PDB does not specify a symbol with an address that
can be relocated against.
Rather than attempt to resolve the variable's value within the IR execution, the
values of all constants can be looked up and incorporated into the AST of the
record type as a literal, mirroring the original compiler AST.
This change applies to DIA and native PDB loaders.
Patch By: jackoalan
Reviewers: aleksandr.urakov, jasonmolenda, zturner, jdoerfert, teemperor
Reviewed By: aleksandr.urakov
Subscribers: sstefan1, lldb-commits, llvm-commits, #lldb
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D82160
I was holding off on this change until we moved to C++14 as to not have
to convert llvm::make_unique to std::make_unique. That happened a while
ago so here's the first patch for the API which had a bunch of raw
`new`s.
Translated processes talk with a different debugserver, shipped with
macOS 11. This patch detects whether a process is translated and
attaches to the correct debugserver implementation.
It's the first patch of a series. Tested on the lldb test suite.
Differential Revision: https://reviews.llvm.org/D82491
The "type" argument to the function is mostly useless -- the only
interesting aspect of it is signedness. Pass signedness directly and
compute the value of bits and signedness fields -- that's exactly
what the single caller of this function does.
Summary:
This redoes https://reviews.llvm.org/D79726 and fixes two things.
- The logic that determines whether to automatically disconnect during the tear down is not very dumb compared to the original implementation. Each test will determine whether to do that or not.
- The terminate commands and terminate event were being sent after the disconnect response was sent to the IDE. That was not good, as VSCode stops the debug session as soon as it receives a disconnect response. Now, the terminate event and terminateEvents are being executed before the disconnect response is sent. This ensures that any connection between the IDE and lldb-vscode is alive while the terminate commands are executed. Besides, it also allows displaying the output of the terminate commands on the debug console, as it's still alive.
Reviewers: clayborg, aadsm, kusmour, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81978
With the advent of Apple Silicon, checking for the architectures
specifically is not correct anymore. This code is only supposed to
run on embedded devices (iPhones et similia), so mark it accordingly.
Summary:
Recently I've noticed that VSCode sometimes doesn't send the terminateDebuggee flag within the disconnectRequest,
even though lldb-vscode sets the terminateDebuggee capability correctly.
This has been causing that inferiors don't die after the debug session ends, and many users have reported issues because of this.
An easy way to mitigate this is to set better default values for the terminateDebuggee field in the disconnect request.
I'm assuming that for a launch request, the default will be true, and for attach it'll be false.
Reviewers: clayborg, labath, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81200
OSType with less than 8 bytes has special code that isn't tested yet.
The same for C-strings that don't have `const char *` type. Also we're now testing
escaping the ASCII escape sequence (\033).
Set the correct os type in the arch triple when running macOS.
Debugserver currently always assumes macOS == x86_64. This patch
generalizes the support to make sure it works on a different
architecture.
Differential Revision: https://reviews.llvm.org/D82394
Add support for changing the stdout and stderr file in Lua's I/O library
and hook it up with the debugger's output and error file respectively
for the interactive Lua interpreter.
https://reviews.llvm.org/D82273
This patch contains:
- Support in LLVM CodeGen for bfloat16 types for ld2/3/4 and st2/3/4.
- New bfloat16 ACLE builtins for svld(2|3|4)[_vnum] and svst(2|3|4)[_vnum]
Reviewers: stuij, efriedma, c-rhodes, fpetrogalli
Reviewed By: fpetrogalli
Tags: #clang, #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D82187
Move the part of the code which is responsible for finding a complete
definition of the type into a separate function (FindCompleteType). This
is split off from D81561, as it's a generally useful cleanup.
No functional change.
Add a way to quit the interactive script interpreter from a shell tests.
Currently, the only way (that I know) to exit the interactive Lua
interpreter is to send a EOF with CTRL-D. I noticed that the embedded
Python script interpreter accepts quit (while the regular python
interpreter doesn't). I've added a special case to the Lua interpreter
to do the same.
Differential revision: https://reviews.llvm.org/D82272
Reland 90c1af106a . This changes the char format
tests which were printing the pointer value of the C-string instead of its
contents, so this test failed on other machines. Now they just print the
bytes in a uint128_t.
Original commit description:
The previous tests apparently missed a few code branches in DumpDataExtractor
code. Also renames the 'test_instruction' which had the same name as another
test (and Python therefore ignored the test entirely).
The previous tests apparently missed a few code branches in DumpDataExtractor
code. Also renames the 'test_instruction' which had the same name as another
test (and Python therefore ignored the test entirely).
Summary:
LLVM is using its own isPrint/isSpace implementation that doesn't change depending on the current locale. LLDB should do the same
to prevent that internal logic changes depending on the set locale.
Reviewers: JDevlieghere, labath, mib, totally_not_teemperor
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D82175
Summary:
Since commit 7b3ef05a37 the Objective-C++ plugin is dead code.
That commit added Objective-C++ to the list of languages for which `Language::LanguageIsCPlusPlus`
returns true. As the C++ language plugin also uses that method to figure out if it is responsible for a
given language, the C++ plugin since then also became the plugin that we found when looking for
a language plugin for Objective-C++. The only real fallout from that is that the source highlighting
for Objective-C++ files never worked as we always found the C++ plugin which refuses to highlight
files with Objective-C++ extensions.
This patch just adds a special exception for Objective-C++ to the list of languages that are governed
by the C++ plugin. Also adds a test that makes sure that we find the right plugin for all C language
types and that the highlighting for `.mm` (Objective-C++) and `.m` (Objective-C) files works.
I didn't revert 7b3ef05a37 as it does make sense to return
true for Objective-C++ from `Language::LanguageIsCPlusPlus` (e.g., we currently check if we care about
ODR violations by doing `if (Language::LanguageIsCPlusPlus(...))` and this should also work for
Objective-C++).
Fixes rdar://64420183
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: mgorny, abidh, JDevlieghere
Differential Revision: https://reviews.llvm.org/D82109
Summary:
TerminalSizeChanged is called from our SIGWINCH signal handler but the
IOHandlerEditline currently doesn't check if we are actually using the real
editline backend. If we're not using the real editline backend, `m_editline_up`
won't be set and `IOHandlerEditline::TerminalSizeChanged` will access
the empty unique_ptr. In a real use case we don't use the editline backend
when we for example read input from a file. We also create some temporary
IOHandlerEditline's during LLDB startup it seems that are also treated
as non-interactive (apparently to read startup commands).
This patch just adds a nullptr check for`m_editline_up` as we do in the rest of
IOHandlerEditline.
Fixes rdar://problem/63921950
Reviewers: labath, friss
Reviewed By: friss
Subscribers: abidh, JDevlieghere
Differential Revision: https://reviews.llvm.org/D81729
and delete a bunch (but not all) redundant code. If you compare the remaining implementations of Platform*Simulator.cpp, there is still an obvious leftover cleanup task.
Specifically, this patch
- removes SDK initialization from dotest (there is equivalent but more
complete code in Makefile.rules)
- make Platform*Simulator inherit the generic implementation of
PlatformAppleSimulator (more can be done here)
- simplify the platform logic in Makefile.rules
- replace the custom SDK finding logic in Platform*Simulator with XcodeSDK
- adds a test for each supported simulator
Differential Revision: https://reviews.llvm.org/D81980
On the buildbot long and int have the same size but long and long long don't,
so the bug where we find the first type by size will produce a different error.
Make the test dynamic based on int/long/long long size to fix the bot.
Summary:
This patch aims to remove multiple copies of GetByteOrder() and ConvertRegisterKindToRegisterNumber used in various versions of RegisterContextPOSIX_*.
Both register implementations are move to RegisterContext class which is parent of RegisterContextPOSIX_* classes.
Built and tested on x86_64-linux-gnu, aarch64-linux-gnu and arm-linux-gnueabihf targets.
Reviewers: labath
Reviewed By: labath
Subscribers: wuzish, nemanjai, kristof.beyls, kbarton, atanasyan, lldb-commits
Differential Revision: https://reviews.llvm.org/D80104
Executing commands below will get you bombarded by a wall of Python
command prompts (>>> ).
$ echo 'foo' | ./bin/lldb -o script
$ cat /tmp/script
script
print("foo")
$ lldb --source /tmp/script
The issue is that our custom input reader doesn't handle EOF. According
to the Python documentation, file.readline always includes a trailing
newline character unless the file ends with an incomplete line. An empty
string signals EOF. This patch raises an EOFError when that happens.
[1] https://docs.python.org/2/library/stdtypes.html#file.readline
Differential revision: https://reviews.llvm.org/D81898
This patch remove the indentation before the command help output.
Supposedly it was meant to be aligned with the different subcommands.
Differential revision: https://reviews.llvm.org/D81783
The reproducer intentionally leak every object allocated during replay,
which means that modules never get orphaned. If this were to happen for
another reason, we might not be testing what we think we are. Assert
that there are no targets left at the end of a test and that the global
module cache is empty in the non-reproducer scenario.
Differential revision: https://reviews.llvm.org/D81612
Prior to my patch of using the LLVM line table parsing code,
SymbolFileDWARF::ParseSupportFiles would only parse the line table
prologues to get the file list for any files that could be in the line
table.
With the old behavior, if we found the file that someone is setting the
breakpoint in in the support files list, we would get a valid index. If
we didn't, we would not look any further. So someone sets a breakpoint
one "MyFile.cpp:12" and if we find "MyFile.cpp" in the support file list
for the compile unit, then and only then would we get the entire line
table for that compile unit.
With the current behavior, no matter what, we always fully parse the
line table for all compile units any time any file and line breakpoint
is set. This creates a serious problem when debugging a large DWARF in
.o file project.
This patch re-instates the old behavior. Unfortunately it means we might
end up parsing to prologue twice, but I don't think that outweighs the
cost of trying to cache/reuse it.
Differential revision: https://reviews.llvm.org/D81589
Summary:
When we get an error back from IRForTarget we directly print that error to the
debugger output stream instead of putting it in the result object. The result
object only gets a vague "The expression could not be prepared to run in the
target" error message that doesn't actually tell the user what went wrong.
This patch just puts the IRForTarget errors into the status object that is
returned to the caller instead of directly printing it to the debugger. Also
updates one test that now can actually check for the error message it is
supposed to check for (instead of the default error which is all we had before).
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D81654
The Python 3 interpreter in Xcode has a relative RPATH and dyld fails to
load it when we copy it into the build directory.
This patch adds an additional check that the copied binary can be
executed. If it doesn't, we assume we're dealing with the Xcode python
interpreter and return the path to the real executable. That is
sufficient for the sanitizers because only system binaries need to be
copied to work around SIP.
This patch also moves all that logic out of LLDBTest and into the lit
configuration so that it's executed only once per test run, instead of
once for every test. Although I didn't benchmark the difference this
should result in a mild speedup.
Differential revision: https://reviews.llvm.org/D81696
Encountered the following situation: Let we started thread T1 and it hit
breakpoint on B1 location. We suspended T1 and continued the process.
Then we started thread T2 which hit for example the same location B1.
This time in a breakpoint callback we decided not to stop returning
false.
Expected result: process continues (as if T2 did not hit breakpoint) its
workflow with T1 still suspended. Actual result: process do stops (as if
T2 callback returned true).
Solution: We need invalidate StopInfo for threads that was previously
suspended just because something that is already inactive can not be the
reason of stop. Thread::GetPrivateStopInfo() may be appropriate place to
do it, because it gets called (through Thread::GetStopInfo()) every time
before process reports stop and user gets chance to change
m_resume_state again i.e if we see m_resume_state == eStateSuspended
it definitely means it was set during previous stop and it also means
this thread can not be stopped again (cos' it was frozen during
previous stop).
Differential revision: https://reviews.llvm.org/D80112
Inline tests have one method named 'test' which means that multiple
inline tests in the same file end up sharing the same build directory
per variant.
This patch overrides the getBuildDirBasename method for the InlineTest
class to include the test name.
Differential revision: https://reviews.llvm.org/D81516
The are not needed as Scalar is implicitly constructible from all of
these types (so the compiler will use a combination of a constructor +
move assignment instead), and they make it very easy for implementations
of assignment and construction operations to diverge.
Summary:
`PlatformAppleSimulator::GetCoreSimulatorPath` currently checks if
`m_core_simulator_framework_path` wasn't set yet and then tries to calculate its
actual value. However, if `GetXcodeDeveloperDirectory` returns an invalid
FileSpec, `m_core_simulator_framework_path` is never assigned a value which
causes that the `return m_core_simulator_framework_path.getValue();` at the end
of the function will trigger an assert.
This patch just assigns an invalid FileSpec to `m_core_simulator_framework_path`
which seems what the calling code in `PlatformAppleSimulator::LoadCoreSimulator`
expects as an error value.
I assume this can be reproduces on machines that don't have an Xcode
installation, but this patch is mostly based on this backtrace I received from
someone else that tried to run the test suite:
```
Assertion failed: (hasVal), function getValue, file llvm/include/llvm/ADT/Optional.h, line 73.
[...]
3 libsystem_c.dylib 0x00007fff682a1ac6 __assert_rtn + 314
4 liblldb.11.0.0git.dylib 0x000000010b835931 PlatformAppleSimulator::GetCoreSimulatorPath() (.cold.1) + 33
5 liblldb.11.0.0git.dylib 0x0000000107e92f11 PlatformAppleSimulator::GetCoreSimulatorPath() + 369
6 liblldb.11.0.0git.dylib 0x0000000107e9383e void std::__1::__call_once_proxy<std::__1::tuple<PlatformAppleSimulator::LoadCoreSimulator()::$_1&&> >(void*) + 30
7 libc++.1.dylib 0x00007fff654d5bea std::__1::__call_once(unsigned long volatile&, void*, void (*)(void*)) + 139
8 liblldb.11.0.0git.dylib 0x0000000107e92019 PlatformAppleSimulator::LaunchProcess(lldb_private::ProcessLaunchInfo&) + 89
9 liblldb.11.0.0git.dylib 0x0000000107e92be5 PlatformAppleSimulator::DebugProcess(lldb_private::ProcessLaunchInfo&, lldb_private::Debugger&, lldb_private::Target*, lldb_private::Status&) + 101
10 liblldb.11.0.0git.dylib 0x0000000107cb044d lldb_private::Target::Launch(lldb_private::ProcessLaunchInfo&, lldb_private::Stream*) + 669
11 liblldb.11.0.0git.dylib 0x000000010792c9c5 lldb::SBTarget::Launch(lldb::SBLaunchInfo&, lldb::SBError&) + 1109
12 liblldb.11.0.0git.dylib 0x0000000107a92acd _wrap_SBTarget_Launch(_object*, _object*) + 477
13 org.python.python 0x000000010681076f PyCFunction_Call + 321
14 org.python.python 0x000000010689ee12 _PyEval_EvalFrameDefault + 7738
```
Reviewers: JDevlieghere, jasonmolenda
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D80997
This replaces the (only) call to llvm::sys::fs::openFileForWrite with
FileSystem::Open. This guarantees that we include log files in the
reproducers.
Differential revision: https://reviews.llvm.org/D81499
These tests are flaky on the reproducer bot. I suspect it has something
to do with the module cache. Skipping the whole category while I
investigate the issue.
This brings over functionality from the xcodeproject that went missing during the CMake transition.
rdar://problem/63840635
Differential Revision: https://reviews.llvm.org/D81300
Before 539b47c9 this test was not actually using the debug_names section
because the -gdwarf added by Makefile.rules on windows overrode the
-gdwarf-5 flag from CFLAGS_EXTRAS. Now that -gdwarf-5 is respected, the
test is failing.
This field is unused (the only way to change its value is via a
constructor which is never called), and as far as I can tell it has been
unused since it was introduced in D12100. It also has some soundness
issues -- e.g. operator= does not reinitialize it, but uses the old
value from the overwritten object.
It sounds like this class should be able to support different floating
point semantics, but if that is needed, it would be better to start
afresh -- probably by passing in an APFloat::fltSemantics object instead
of a bool flag.
This makes it possible to conditionally override some of these flags via
CFLAGS_EXTRAS. It should be NFC right now, but this seems the logical
order in which to apply these things, and I am going to make use of this
in another patch.
In addition to having the default fallback from Python 3 to Python 2, it
should also be possible to build against Python 2 explicitly. This patch
makes that possible by setting LLDB_PYTHON_VERSION. The variable only
has effect with CMake 3.12 or later.
Differential revision: https://reviews.llvm.org/D81501
SBFileSpec.fullpath always uses the forward slash to join the directory with the
base name. This causes mismatches when comparing Windows paths with backslashes
in two of the minidump tests. To get around that we just compare the directory
names separately from the filenames.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D81465
Color the error: and warning: part of the CommandReturnObject output,
similar to how an error is printed from the driver when colors are
enabled.
Differential revision: https://reviews.llvm.org/D81058
D80519 <https://reviews.llvm.org/D80519>
added support for `DW_TAG_GNU_call_site` but
Bug 45886 <https://bugs.llvm.org/show_bug.cgi?id=45886>
found one case did not work.
There is:
0x000000b1: DW_TAG_GNU_call_site
DW_AT_low_pc (0x000000000040111e)
DW_AT_abstract_origin (0x000000cc "a")
...
0x000000cc: DW_TAG_subprogram
DW_AT_name ("a")
DW_AT_prototyped (true)
DW_AT_low_pc (0x0000000000401109)
^^^^^^^^^^^^ - here it did overwrite the 'low_pc' variable containing value 0x40111e we wanted
DW_AT_high_pc (0x0000000000401114)
DW_AT_frame_base (DW_OP_call_frame_cfa)
DW_AT_GNU_all_call_sites (true)
DW_TAG_GNU_call_site attributes order as produced by GCC:
0x000000b1: DW_TAG_GNU_call_site
DW_AT_low_pc (0x000000000040111e)
DW_AT_abstract_origin (0x000000cc "a")
clang produces the attributes in opposite order:
0x00000064: DW_TAG_GNU_call_site
DW_AT_abstract_origin (0x0000002a "a")
DW_AT_low_pc (0x0000000000401146)
Differential Revision: https://reviews.llvm.org/D81334
Previously, we were simply ignoring them and continuing the evaluation.
This behavior does not seem useful, because the resulting value will
most likely be completely bogus.
Summary:
The way that the support for the GNU dialect of tail call frames was
implemented in D80519 meant that the were reporting very bogus PC values
which pointed into the middle of an instruction: the -1 trick is
necessary for the address to resolve to the right function, but we
should still be reporting a more realistic PC value -- I say "realistic"
and not "real", because it's very debatable what should be the correct
PC value for frames like this.
This patch achieves that my moving the -1 from SymbolFileDWARF into the
stack frame computation code. The idea is that SymbolFileDWARF will
merely report whether it has provided an address of the instruction
after the tail call, or the address of the call instruction itself. The
StackFrameList machinery uses this information to set the "behaves like
frame zero" property of the artificial frames (the main thing this flag
does is it controls the -1 subtraction when looking up the function
address).
This required a moderate refactor of the CallEdge class, because it was
implicitly assuming that edges pointing after the call were real calls
and those pointing the the call insn were tail calls. The class now
carries this information explicitly -- it carries three mostly
independent pieces of information:
- an address of interest in the caller
- a bit saying whether this address points to the call insn or after it
- whether this is a tail call
Reviewers: vsk, dblaikie
Subscribers: aprantl, mgrang, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81010
SBTarget::AddModule currently handles the UUID parameter in a very
weird way: UUIDs with more than 16 bytes are trimmed to 16 bytes. On
the other hand, shorter-than-16-bytes UUIDs are completely ignored. In
this patch, we change the parsing code to handle UUIDs of arbitrary
size.
To support arbitrary size UUIDs in SBTarget::AddModule, this patch
changes UUID::SetFromStringRef to parse UUIDs of arbitrary length. We
subtly change the semantics of SetFromStringRef - SetFromStringRef now
only succeeds if the entire input is consumed to prevent some
prefix-parsing confusion. This is up for discussion, but I believe
this is more consistent - we always return false for invalid UUIDs
rather than sometimes truncating to a valid prefix. Also, all the
call-sites except the API and interpreter seem to expect to consume
the entire input.
This also adds tests for adding existing modules 4-, 16-, and 20-byte
build-ids. Finally, we took the liberty of testing the minidump
scenario we care about - removing placeholder module from minidump and
replacing it with the real module.
Reviewed By: labath, friss
Differential Revision: https://reviews.llvm.org/D80755
trivial.
We previously took a shortcut by assuming that if a subobject had a
trivial copy assignment operator (with a few side-conditions), we would
always invoke it, and could avoid going through overload resolution.
That turns out to not be correct in the presenve of ref-qualifiers (and
also won't be the case for copy-assignments with requires-clauses
either). Use the same logic for lazy declaration of copy-assignments
that we use for all other special member functions.
Previously committed as c57f8a3a20. This
now also includes an extension of LLDB's workaround for handling special
members without the help of Sema to cover copy assignments.
Since FindXcodeContentsDirectoryInPath expects the *.app/Contents and
DEVELOPER_DIR is supposed to point to Xcode.app, we need to append the
Contents path first.
Differential Revision: https://reviews.llvm.org/D81290
The printf expression crashes with the message:
Attempted to dereference an invalid pointer
Someone who knows more about Windows should suggest how to fix this.
In the similar review D81128, Jonas pointed out some style errors that also
apply to D80775 (which is already committed). Also applying the changes
suggested there to this code.
Support printing strings which contain invalid utf8 sub-sequences, e.g.
strings like "hello world \xfe", instead of bailing out with "Summary
Unavailable".
I took the opportunity here to delete some hand-rolled utf8 -> utf32
conversion code and replace it with calls into llvm's Support library.
rdar://61554346
The different tools constructing dotest invocations (lit and
lldb-dotest) already print the command invocation so there's no need to
print it again in the dotest output.
My motivation for removing it is that it doesn't include the Python
interpreter and every time I accidentally copy it, the command fails
with an `ImportError`.
Differential revision: https://reviews.llvm.org/D81032
Summary:
Assignment operator `operator=(long long)` currently allocates `sizeof(long)`.
On some platforms it works as they have `sizeof(long) == sizeof(long long)`,
but on others (e.g. Windows) it's not the case.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D80995
The Darwin builder is passing some of the make arguments trough the
environment instead of the command line. Update the dsym builder to do
the same as the other variants.
Don't use the environment to pass values to the builder that are present
in the dotest configuration module. A subsequent patch will pass the
remaining values through the configuration instead of the environment.
Summary:
The code changes are very straight-forward -- just handle both DW_AT_GNU
and DW_AT_call versions of all tags and attributes. There is just one
small gotcha: in the GNU version, DW_AT_low_pc was used both for the
"return pc" and the "call pc" values, depending on whether the tag was
describing a tail call, while the official scheme uses different
attributes for the two things.
Reviewers: vsk, dblaikie
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80519
This patch marks TestCreateDuringInstructionStep.py as flakey for Linux.
This is failing randomly on arm/aarch64. I will monitor buildbot and
skip it if it fails again.
This fixes an unhandled signed integer overflow in AddWithCarry() by
using the llvm::checkedAdd() function. Thats to Vedant Kumar for the
suggestion!
<rdar://problem/60926115>
Differential Revision: https://reviews.llvm.org/D80955
This reverts commit fd0ab3b3eb.
The fix here is incorrect and the actual fault was an incorrect test Makefile.
To give some more background:
The original test for D80798 compiled three source files into either one
executable or one executable + 2 shared libraries, each being one different
test setup. If both the monolithic executable and the shared libraries
where compiled in the same directory, then Make would overwrite the .o files
of one test setup with the other. This caused that while -fPIC was passed
correctly to the test setup with the shared libraries, the compiler invocations
for the monolithic executable would later overwrite these object files (and
as only the test setup with the shared library used -fPIC, it appeared as if
the shared library object files didn't receive the -fPIC flag).
Thanks to Pavel for figuring this out.
Summary:
ClangExpressionSourceCode has different ways to wrap the user expression based on
which context the expression is executed in. For example, if we're in a C++ member
function we put the expression inside a fake member function of a fake class to make the
evaluation possible. Similar things are done for Objective-C instance/static methods.
There is also a default wrapping where we put the expression in a normal function
just to make it possible to execute it.
The way we currently define which kind of wrapping the expression needs is based on
the `wrapping_language` we keep passing to the ClangExpressionSourceCode
instance. We repurposed the language type enum for that variable to distinguish the
cases above with the following mapping:
* language = C_plus_plus -> member function wrapping
* language = ObjC -> instance/static method wrapping (`is_static` distinguished between those two).
* language = C -> normal function wrapping
* all other cases like C_plus_plus11, Haskell etc. make our class a no-op that does mostly nothing.
That mapping is currently not documented and just confusing as the `language`
is unrelated to the expression language (and in the ClangUserExpression we even pretend
that it *is* the actual language, but luckily never used it for anything). Some of the code
in ClangExpressionSourceCode is also obviously thinking that this is the actual language of
the expression as it checks for non-existent cases such as `ObjC_plus_plus` which is
not part of the mapping.
This patch makes a new enum to describe the four cases above (with instance/static Objective-C
methods now being their own case). It also make that enum just a member of
ClangExpressionSourceCode instead of having to pass the same value to the class repeatedly.
This gets also rid of all the switch-case-checks for 'unknown' language such as C_plus_plus11 as this
is no longer necessary.
Reviewers: labath, JDevlieghere
Reviewed By: labath
Subscribers: abidh
Differential Revision: https://reviews.llvm.org/D80793
Summary:
It seems that when we rewrite a few rules to only build a dylib (i.e., when DYLIB_ONLY is set),
the rule for setting the CFLAGS for the dylib's object file compilation will no longer work. From what I can
see this is because in DYLIB_ONLY mode we pretend to compile the main executable so
the DYLIB_OBJECTS scope is actually never used.
This patch makes `-fPIC` unstopped if DYLIB_ONLY is set so that -fPIC actually ends up in the
CFLAGS for the dylib object file compilation.
The test for this is D80798 which only compiles on Linux with this patch.
Reviewers: friss, labath
Reviewed By: friss
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D80789
Commit 0800529fe6 adds a runtime error which triggers when using
SBAddress properties that use the current process/target from a
non-interactive session. TestThreadPlanCommands.py was doing exactly
this and this patch fixes that by use GetLoadAddress instead.
Several SBAddress properties use the lldb.target or lldb.process
convenience variables which are only set under the interactive script
interpreter. Unfortunately, users have been using these properties in
Python script and commands. This patch raises a Python exception to
force users to use GetLoadAddress instead.
Differential revision: https://reviews.llvm.org/D80848
We are leaking forked processes on macOS because the cleanup function
was checking the existence of /proc/pid which does not exist on macOS.
I've changed the code to be platform agnostic.
Don't run tests that use undefined behavior sanitizer inside an
address-sanitized LLDB. The tests don't support that
configuration. Incidentally they were skipped on green dragon for a
different reason, so this hasn't come up there before.
Don't run tests that use thread sanitizer inside an address-sanitized
LLDB. The tests don't support that configuration. Incidentally they
were skipped on green dragon for a different reason, so this hasn't
come up there before.
One can have multiple simulator runtimes installed, supporting
various generations of OSs. The logic in TestAppleSimulatorOSType
might select a rnutime older than the one targeted by the current
tools, preventing the executable from running. This commit changes
the test to look for the most recent runtime available instead.
Summary:
On Android, this method gets called twice: first when establishing
a host-server connection, then when attaching to a process id.
Each call takes several seconds to finish (especially slower on Windows)
and eliminating the call for the typical case improves latency significantly.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D79586
Summary:
This patch adds two new arguments to the MakeInlineTest function. The
main motivation is a follow-up patch I'm preparing, but they seem
generally useful.
The first argument allows the user to specify the "build dictionary".
With this argument one can avoid the need to provide a custom Makefile
if all he needs is to override a couple of make variables. This hooks in
neatly into the existing dictionary support for non-inline tests.
The second argument specifies the name of the test. This could be used
to provide better names to the generated test classes, but it's mainly
useful in conjuction with the first argument: now that we can specify a
custom build dictionary, it may sometimes make sense to run the same
test twice with different build configurations. To achieve that, we need
to give the two tests different names, and this argument achieves that.
The usage of the arguments is demonstrated via TestBasicEntryValues.py.
Reviewers: vsk, JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80518
Summary:
Running `vsce package` to package lldb-vscode as an installable .vsix file errors with:
```
ERROR Invalid publisher name 'llvm.org'. Expected the identifier of a publisher, not its human-friendly name.
```
This patch fixes the publisher name and bumps a required dependency so that `vsce package` succeeds.
Reviewers: clayborg
Reviewed By: clayborg
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80569
Jim pointed out that "every time somebody has touched the documentation
on startup files they have stated that we source the application one and
then the global one, even though in actual fact we’ve never done that."
Indeed, when we read the application specific .lldbinit file, the global
one is not read. This patch updates the man page to reflect that.
This adds a new target `check-lldb-reproducers` that replaces the old
`check-lldb-repro`. The latter would only run the shell tests, while
`check-lldb-reproducers` includes the API tests as well. The new target
will be used on GreenDragon.
It's still possible to run just the shell tests with reproducers,
although now that requires crafting the lit invocation yourself. The
parameters haven't changed and are the shame for the API and shell
tests:
--param lldb-run-with-repro=capture
--param lldb-run-with-repro=replay
This patch also updates the reproducer documentation.
This property is explicitly for use only in the interactive editor,
and NOT in commands. It's use worked until we got more careful about
not leaving lldb.target lying around in the script interpreter.
I also added a quick sniff test for the save_crashlog command.
<rdar://problem/60350620>
Differential Revision: https://reviews.llvm.org/D80680
After this patch all remaining tests should pass on macOS when replayed
from a reproducer.
To capture the reproducers:
./bin/llvm-lit ../llvm-project/lldb/test/ --param lldb-run-with-repro=capture
To replay the reproducers:
./bin/llvm-lit ../llvm-project/lldb/test/ --param lldb-run-with-repro=replay
The reproducer don't model timeouts so tests that rely on them end up
with unexpected packets during replay. Skip them until we can handle
this scenario.
Although it's not entirely clear to me why, this test was generating its
binary in the source directory instead of the build directory. This
patch fixes that following the same approach as other tests.
The purpose of the LLDB_RECORD_DUMMY macro is twofold: it is used in
functions that take arguments that we don't know how to serialize (e.g.
void*) and it's used by function where we want to avoid doing excessive
work because they can be called from a signal handler (e.g.
setTerminalWidth).
To support the latter case, I've disabled API logging form the Recorder
ctor used by the DUMMY macro. This ensures we don't allocate memory when
called from a signal handler.
Summary:
It turns out that the order in which we provide completions for expressions is
nondeterministic. This leads to confusing user experience and also breaks the
reproducer tests (as two LLDB tests can go out of sync due to the
non-determinism in the completion lists)
The reason for the non-determinism is that the CompletionConsumer informs us
about decls in the order in which it finds declarations in the lookup store of
the DeclContexts it visits (mainly this snippet in SemaLookup.cpp):
``` lang=c++
// Enumerate all of the results in this context.
for (DeclContextLookupResult R :
Load ? Ctx->lookups()
: Ctx->noload_lookups(/*PreserveInternalState=*/false)) {
[...]
```
This storage of the lookup is sorted by pointer values (see the hash of
`DeclarationName`) and can therefore be non-deterministic. The LLDB code
completion consumer that receives these calls originally expected that the order
of declarations is defined by Clang, but it seems the API expects the client to
provide an order to the completions.
This patch fixes the issue as follows:
* We sort the completions we get from Clang alphabetically and also by the
priority value we get from Clang (with priority value sorting having precedence
over the alphabetical sorting)
* We make all the functions/variables that touch a completion before the sorting
const-qualified. The idea is that this should prevent that we never have
observable side-effect from touching these declarations in a non-deterministic
order (e.g., we don't try to complete the type by accident).
This way we behave like the other parts of Clang which also sort the results by
some deterministic value (usually the name or something computed from a name,
e.g., edit distance to a given string).
We most likely also need to fix the Clang code to make the loop I listed above
deterministic to prevent these issues in the future (tracked in rdar://63442513
). This wouldn't replace the functionality provided in this patch though as we
would still need the priority and overall alphabetical sorting.
Note: I had to increase the lldb-vscode completion limit to 100 as the tests
look for strings that aren't in the first 50 results anymore due to variable
names starting with letters like 'v' (which are now always shown much further
down in the list due to the alphabetical sorting).
Fixes rdar://63200995
Reviewers: JDevlieghere, clayborg
Reviewed By: JDevlieghere
Subscribers: mgrang, abidh
Differential Revision: https://reviews.llvm.org/D80292
Summary: `CommandObject::CheckRequirements` requires cleaning up `m_exe_ctx`
between commands. Function `HandleOptionCompletion` returns without cleaning up
`m_exe_ctx` could cause assert failure in later `CheckRequirements`.
Reviewers: teemperor, JDevlieghere
Reviewed By: teemperor
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80447
Summary:
For ObjCInterfaceDecls, LLDB iterates over the `methods` of the interface in FindExternalVisibleDeclsByName
since commit ef423a3ba5 .
However, when LLDB calls `oid->methods()` in that function, Clang will pull in all declarations in the current
DeclContext from the current ExternalASTSource (which is again, `ClangExternalASTSourceCallbacks`). The
reason for that is that `methods()` is just a wrapper for `decls()` which is supposed to provide a list of *all*
(both currently loaded and external) decls in the DeclContext.
However, `ClangExternalASTSourceCallbacks::FindExternalLexicalDecls` doesn't implement support for ObjCInterfaceDecl,
so we don't actually add any declarations and just mark the ObjCInterfaceDecl as having no ExternalLexicalStorage.
As LLDB uses the ExternalLexicalStorage to see if it can complete a type with the ExternalASTSource, this causes
that LLDB thinks our class can't be completed any further by the ExternalASTSource
and will from on no longer make any CompleteType/FindExternalLexicalDecls calls to that decl. This essentially
renders those types unusable in the expression parser as they will always be considered incomplete.
This patch just changes the call to `methods` (which is just a `decls()` wrapper), to some ad-hoc `noload_methods`
call which is wrapping `noload_decls()`. `noload_decls()` won't trigger any calls to the ExternalASTSource, so
this prevents that ExternalLexicalStorage will be set to false.
The test for this is just adding a method to an ObjC interface. Before this patch, this unset the ExternalLexicalStorage
flag and put the interface into the state described above.
In a normal user session this situation was triggered by setting a breakpoint in a method of some ObjC class. This
caused LLDB to create the MethodDecl for that specific method and put it into the the ObjCInterfaceDecl.
Also `ObjCLanguageRuntime::LookupInCompleteClassCache` needs to be unable to resolve the type do
an actual definition when the breakpoint is set (I'm not sure how exactly this can happen, but we just
found no Type instance that had the `TypePayloadClang::IsCompleteObjCClass` flag set in its payload in
the situation where this happens. This however doesn't seem to be a regression as logic wasn't changed
from what I can see).
The module-ownership.mm test had to be changed as the only reason why the ObjC interface in that test had
it's ExternalLexicalStorage flag set to false was because of this unintended side effect. What actually happens
in the test is that ExternalLexicalStorage is first set to false in `DWARFASTParserClang::CompleteTypeFromDWARF`
when we try to complete the `SomeClass` interface, but is then the flag is set back to true once we add
the last ivar of `SomeClass` (see `SetMemberOwningModule` in `TypeSystemClang.cpp` which is called
when we add the ivar). I'll fix the code for that in a follow-up patch.
I think some of the code here needs some rethinking. LLDB and Clang shouldn't infer anything about the ExternalASTSource
and its ability to complete the current type form the `ExternalLexicalStorage` flag. We probably should
also actually provide any declarations when we get asked for the lexical decls of an ObjCInterfaceDecl. But both of those
changes are bigger (and most likely would cause us to eagerly complete more types), so those will be follow up patches
and this patch just brings us back to the state before commit ef423a3ba5 .
Fixes rdar://63584164
Reviewers: aprantl, friss, shafik
Reviewed By: aprantl, shafik
Subscribers: arphaman, abidh, JDevlieghere
Differential Revision: https://reviews.llvm.org/D80556
Summary:
Objective-C names are stored in m_demangled, not in m_mangled. The
method in the condition will never return true.
Differential Revision: https://reviews.llvm.org/D79823
Summary:
A struct argument can be passed-by-value to a callee via a pointer to a
temporary stack copy. Add support for emitting an entry value DBG_VALUE
when an indirect parameter DBG_VALUE becomes unavailable. This is done
by omitting DW_OP_stack_value from the entry value expression, to make
the expression describe the location of an object.
rdar://63373691
Reviewers: djtodoro, aprantl, dstenb
Subscribers: hiraditya, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D80345
Don't run tests that use address sanitizer inside an address-sanitized
LLDB. The tests don't support that configuration. Incidentally they
were skipped on green dragon for a different reason, so this hasn't
come up there before.
Many tests use (commented out) print statement for debugging the test
itself. This patch adds a new trace method to lldbtest to reuse the
existing tracing infrastructure and replace these print statements.
Differential revision: https://reviews.llvm.org/D80448
The llvm DWARFExpression dump is nearly identical, but better -- for
example it does print a spurious space after zero-argument expressions.
Some parts of our code (variable locations) have been already switched
to llvm-based expression dumping. This switches the remainder: unwind
plans and some unit tests.
Summary:
This is an attempt to fix https://bugs.llvm.org/show_bug.cgi?id=45988,
where SBValue::GetNumChildren returns 2, but SBValue::GetChildAtIndex(1) returns
an invalid value sentinel.
The root cause of this seems to be that GetNumChildren can return the number of
children of a wrong value. In particular, for pointers GetNumChildren just
recursively calls itself on the pointee type, so it effectively walks chains of
pointers. This is different from the logic of GetChildAtIndex, which only
recurses if pointee.IsAggregateType() returns true (IsAggregateType is false for
pointers and references), so it never follows chain of pointers.
This patch aims to make GetNumChildren (more) consistent with GetChildAtIndex by
only recursively calling GetNumChildren for aggregate types.
Ideally, GetNumChildren and GetChildAtIndex would share the code that decides
which pointers/references are followed, but that is a bit more invasive change.
Reviewers: teemperor, jingham, clayborg
Reviewed By: teemperor, clayborg
Subscribers: clayborg, labath, shafik, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80254
This patchs adds an optional warning that is printed when stopped at a
frame that was compiled in a source language that LLDB has no plugin
for.
The motivational use-case is debugging Swift code on Linux. When the
user accidentally invokes the system LLDB that was built without the
Swift plugin, it is very much non-obvious why debugging doesnt
work. This warning makes it easy to figure out what went wrong.
<rdar://problem/56986569>
This reverts commit 5f88f39ab8. It broke these
three tests on the Window bot:
lldb-api :: commands/expression/completion/TestExprCompletion.py
lldb-api :: lang/cpp/scope/TestCppScope.py
lldb-api :: lang/cpp/standards/cpp11/TestCPP11Standard.py
These files haven't been touched since 2015. According to Pavel these
were intended to be test for the test framework which never really took
of and are mostly irrelevant by now.
Differential revision: https://reviews.llvm.org/D80408
200 microseconds is not enough time for any expression to execute
reliably. On linux, calling pthread_exit can result in call to dlopen,
which cannot complete in that time, particularly when running under a
debugger.
On linux, this test failed all the time, on macos, about two thirds of
runs were failing. This patch increases the timeout to 100ms, which is
enough to get it passing reliably on linux, though I wouldn't be
surprised if an even bigger timeout would be needed for remote test
runs.
Summary:
Currently we never enable C++14 in the expression evaluator. This enables it when the language of the program is C++14.
It seems C++17 and so on isn't yet in any of the language enums (and the DWARF standard it seems), so C++17 support will be a follow up patch.
Reviewers: labath, JDevlieghere
Reviewed By: labath, JDevlieghere
Subscribers: aprantl
Differential Revision: https://reviews.llvm.org/D80308
Summary: We are not doing this very often, but sometimes it's convenient when I can just << ConstStrings into llvm::errs() during testing.
Reviewers: labath, JDevlieghere
Reviewed By: labath, JDevlieghere
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D80310
Remove commented out code, fix the indentation and always use the full
path to the executable. The latter is necessary for the test to pass
from reproducer replay.
Demangling Itanium symbols either consumes the whole input or fails,
but Microsoft symbols can be successfully demangled with just some
of the input.
Add an outparam that enables clients to know how much of the input was
consumed, and use this flag to give llvm-undname an opt-in warning
on partially consumed symbols.
Differential Revision: https://reviews.llvm.org/D80173
This class should've been instrumented when it landed. Whether the class
is "highly mutable" or not doesn't affect that.
With this patch TestSBEnvironment.py now passes when replayed.
Print a little snippet before exiting when passed unrecognized
arguments. The goal is twofold:
- Point users to lldb --help.
- Make it clear that we exited the debugger.
Summary:
Long long ago system_libs was appended to LLDB_SYSTEM_LIBS in
cmake/LLDBDependencies.cmake. After that file was removed, system_libs
is orphaned.
Currently the only user is source/Utility. Move the logic there and
remove system_libs.
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80253
Summary:
This changes allows to disable or use customized libxml2 for lldb.
1. Removes redundant include_directories. The one in LLDBConfig.cmake should be enough.
2. Link to ${LIBXML2_LIBRARIES} if xml2 is enabled.
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80257
This makes it possible to instrument the call for the reproducers. This
fixes TestStructuredDataAPI.py with reproducer replay.
Differential revision: https://reviews.llvm.org/D80312
There appears to be consensus in D80165 that this is the desired
behavior and I personally agree.
Differential revision: https://reviews.llvm.org/D80226
Add reproducer support to PlatformRemoteGDBServer. The logic is
essentially the same as for ProcessGDBRemote. During capture we record
the GDB packets and during replay we connect to a replay server.
This fixes TestPlatformClient.py when run form a reproducer.
Differential Revision: https://reviews.llvm.org/D80224
This reverts commit b783f70a42. This
change had multiple issues which required post-commit fixups, and not
all issues are fixed yet. In particular, the LLDB build bot for ARM is
still broken. There is also an ongoing conversation in the original
phabricator review about whether there is undefined behavior in the
code.
Summary:
When adb client connects to adb server, or when lldb connects to
lldb server on Android device, IPv6 does not work (at least on
Windows it does not work).
For Android on Windows, each IPv6 failure (fallback-to-IPv4) wastes
2 seconds, and since this is called 5 times when attaching, LLDB
is wasting 10 seconds. This CL brings a big improvement to attach latency.
Reviewers: labath
Reviewed By: labath
Subscribers: aadsm, clayborg, mgrang, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D79757
Jonas Devlieghere