This patch adds NativeRegisterContext_arm64 ptrace routines to access
AArch64 SVE register set. This patch also adds a test-case to test
AArch64 SVE register access and dynamic size configuration capability.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D79699
In our discussion D79699 SVE ptrace register access support we decide to
invalidate register context cached data on every stop instead of doing
at before Step/Resume.
InvalidateAllRegisters was added to facilitate flushing of SVE register
context configuration and cached register values. It now makes more
sense to move invalidation after every stop where we initiate SVE
configuration update if needed by calling ConfigureRegisterContext.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D84501
This patch updates LLDB's in house version of SVE ptrace/sig macros by
converting them into constants and inlines. They are housed under sve
namespace and are used by process elf-core for reading SVE register data.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85641
Checking if an object file is in memory should use the ObjectFile::IsInMemory(), not test ObjectFile::BaseAddress(). ObjectFile::BaseAddress() is designed to be overridden by all classes and is for mach-o, ELF and COFF plug-ins. They find the header base adddress and return that as a section offset address. The default implementation of ObjectFile::BaseAddress() does try and make an Address() from the ObjectFile::m_memory_addr, but I switched it to a correct function call.
Differential Revision: https://reviews.llvm.org/D86122
Parsing DWARFv5 debug_loclist offsets when a CU is parsed is weighing
down memory usage of symbolizers that don't need to parse this data at
all. There's not much benefit to caching these anyway - since they are
O(1) lookup and reading once you know where the offset list starts (and
can do bounds checking with the offset list size too).
In general, I think it might be time to start paying down some of the
technical debt of loc/loclist/range/rnglist parsing to try to unify it a
bit more.
eg:
* Currently DWARFUnit has: RangeSection, RangeSectionBase, LocSection,
LocSectionBase, LocTable, RngListTable, LoclistTableHeader (be nice if
these were all wrapped up in two variables - one for loclists, one for
rnglists)
* rnglists and loclists are handled differently (see:
LoclistTableHeader, but no RnglistTableHeader)
* maybe all these types could be less stateful - lazily parse what they
need to, even reparsing rather than caching because it doesn't seem
too expensive, for instance. (though admittedly so long as it's
constantcost/overead per compilatiton that's probably adequate)
* Maybe implementing and using a DWARFDataExtractor that can be
sub-ranged (so we could slice it up to just the single contribution) -
though maybe that's not so useful because loc/ranges need to refer to
it by absolute, not contribution-relative mechanisms
Differential Revision: https://reviews.llvm.org/D86110
D85968 started to use `split-file` and while buildbots run fine while
doing `make check-lldb` by hand I get:
.../llvm-monorepo-clangassert/tools/lldb/test/SymbolFile/DWARF/Output/DW_AT_declaration-with-children.s.script: line 2: split-file: command not found
failed:
lldb-shell :: SymbolFile/DWARF/DW_AT_declaration-with-children.s
Differential Revision: https://reviews.llvm.org/D86144
I intentionally decided not to reset the column automatically
anywhere, because I don't know where and if at all that should happen.
There should be always an indication of being scrolled (too much)
to the right, so I'll leave this to whoever has an opinion.
Differential Revision: https://reviews.llvm.org/D85290
Currently it is hard to avoid having LLVM link to the system install of
ncurses, since it uses check_library_exists to find e.g. libtinfo and
not find_library or find_package.
With this change the ncurses lib is found with find_library, which also
considers CMAKE_PREFIX_PATH. This solves an issue for the spack package
manager, where we want to use the zlib installed by spack, and spack
provides the CMAKE_PREFIX_PATH for it.
This is a similar change as https://reviews.llvm.org/D79219, which just
landed in master.
Differential revision: https://reviews.llvm.org/D85820
Rename the existing expectedFailure to expectedFailureIfFn to better
describe its purpose and provide an overload for
unittest2.expectedFailure in decorators.py.
Only link against Python3_LIBRARY when LLDB_ENABLE_PYTHON is true. We
have to be more strict now becuase Python3_LIBRARY might be set to
NOTFOUND instead of being not set at all.
The comment says that TestMultipleDebuggers was XFAILed because it was
failing nondeterministically in which case it should be skipped not
failed (as XPASS will cause the test suite to fail).
The reason it fails is because it was not marked as a no-debug-info test
case. I've ran the test in a loop and it has been passing consistently.
Let's enable it and see if the bots agree, if not we can skip it.
This patch is a big sed to rename the following variables:
s/PYTHON_LIBRARIES/Python3_LIBRARIES/g
s/PYTHON_INCLUDE_DIRS/Python3_INCLUDE_DIRS/g
s/PYTHON_EXECUTABLE/Python3_EXECUTABLE/g
s/PYTHON_RPATH/Python3_RPATH/g
I've also renamed the CMake module to better express its purpose and for
consistency with FindLuaAndSwig.
Differential revision: https://reviews.llvm.org/D85976
CreateFunctionDeclaration should just take a StringRef. GetDeclarationName is
(only) used by CreateFunctionDeclaration so that's why now also takes a
StringRef.
This is the error message from the OS, so we shouldn't check against the
OS-specific part of the string.
Fixes the test on Windows which returns a different error message.
In D83876 the consensus seems that LLDB should never deleted orphaned modules
implicitly. However, SBDebugger::DeleteTarget is currently doing exactly that.
This code was added in 753406221b but I don't see
any explanation in the commit, so I think we should delete it.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D83933
The class contains an enum listing all host integer types as well as
some non-host types. This setup is a remnant of a time when this class
was actually implemented in terms of host integer types. Now that we are
using llvm::APInt, they are mostly useless and mean that each function
needs to enumerate all of these cases even though it treats most of them
identically.
I only leave e_sint and e_uint to denote the integer signedness, but I
want to remove that in a follow-up as well.
Removing these cases simplifies most of these functions, with the only
exception being PromoteToMaxType, which can no longer rely on a simple
enum comparison to determine what needs to be promoted.
This also makes the class ready to work with arbitrary integer sizes, so
it does not need to be modified when someone needs to add a larger
integer size.
Differential Revision: https://reviews.llvm.org/D85836
With -flimit-debug-info, we can run into cases when we only have a class
as a declaration, but we do have a definition of a nested class. In this
case, clang will hit an assertion when adding a member to an incomplete
type (but only if it's adding a c++ class, and not C struct).
It turns out we already had code to handle a similar situation arising
in the -gmodules scenario. This extends the code to handle
-flimit-debug-info as well, and reorganizes bits of other code handling
completion of types to move functions doing similar things closer
together.
Differential Revision: https://reviews.llvm.org/D85968
Right now the only places in the SB API where lldb:: ModuleSP instances are
destroyed are in SBDebugger::MemoryPressureDetected (where it's just attempted
but not guaranteed) and in SBDebugger::DeleteTarget (which will be removed in
D83933). Tests that directly create an lldb::ModuleSP and never create a target
therefore currently leak lldb::Module instances. This triggers the sanity checks
in lldbtest that make sure that the global module list is empty after a test.
This patch adds SBModule::GarbageCollectAllocatedModules as an explicit way to
clean orphaned lldb::ModuleSP instances. Also we now start calling this method
at the end of each test run and move the sanity check behind that call to make
this work. This way even tests that don't create targets can pass the sanity
check.
This fixes TestUnicodeSymbols.py when D83865 is applied (which makes that the
sanity checks actually fail the test).
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D83876
We didn't do anything with the llvm::Error we get from `Open`, so when we end up in the
error case we just crash due to the llvm::Error sanity check. Also add the missing newline
behind the error message so it no longer messes with the next (lldb) prompt.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D85970
`lldb-server platform --socket-file /any/path` currently always fails to create
the socket file. This stopped working after D67424 which changed the
input variables of `writeFileAtomically` slightly. We're expected to
pass in a temporary path template (`/tmp/foo-%%%%%`) and the final
path we want to write. Instead we currently pass in the never set
`temp_file_path` as the temporary path (which will make this function always
fail) and pass in the temp_file_spec's path as the final path (which is actually
the template path such as `/tmp/foo-%%%%%`) instead of the actual path
we want to write (e.g. `/tmp/foo`).
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85890
This parameter isn't used anywhere in LLDB nor the Swift downstream branch. It
also doesn't really fit into the TypeSystem APIs that usually don't return
additional related functionality via some output parameters. Also the
implementations already states that the calculated value there is wrong.
Let's remove it. If we need this functionality at some point then Swift's much
nicer `GetByteStride` function seems like the way to go.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D84299
Right now if the test suite encounters a cleanup error it just prints "CLEANUP
ERROR:" but not any additional information.
This patch just prints the exception that caused the cleanup error. This should
make debugging the failing tests for D83865 easier (and seems in general nice to
have).
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D83874
This removes the fallback to Python 2 and makes Python 3 the only
supported configuration. This is the first step to fully migrate to
Python 3 over the coming releases as discussed on the mailing list.
http://lists.llvm.org/pipermail/lldb-dev/2020-August/016388.html
As a reminder, for the current release the test suite and the generated
bindings should remain compatible with Python 2.
Differential revision: https://reviews.llvm.org/D85942
Currently these two tests use an arbitrary wait of 5 seconds for the
inferior to finish setting up. When the test machine is under heavy load
this sometimes is insufficient leading to spurious test failures. This
patch adds synchronization trough a token on the file system. In
addition to making the test more reliable it also makes it much faster
because we no longer have to wait the full 5 seconds if the setup was
completed faster than that.
Differential revision: https://reviews.llvm.org/D85915
In sanitized builds the last packet this function finds for the
TestMacCatalyst and TestPlatformSimulator tests is for the asan runtime.
```
< 69> send packet: $jGetLoadedDynamicLibrariesInfos:{"solib_addresses":[4296048640]}]#3a <
715> read packet: ${"images":[{"load_address":4296048640,"mod_date":0,"pathname":
"/Users/buildslave/jenkins/workspace/lldb-cmake-sanitized/host-compiler/lib/clang/12.0.0/lib/darwin/libclang_rt.asan_osx_dynamic.dylib",
"uuid":"8E38A2CD-753F-3E0F-8EB0-F4BD5788A5CA",
"min_version_os_name":"macosx","min_version_os_sdk":"10.9",
"mach_header":{"magic":4277009103,"cputype":16777223,"cpusubtype":3,"filetype":6,
"flags":43090053}],"segments":[{"name":"__TEXT","vmaddr":0,"vmsize":565248,"fileoff":0,
"filesize":565248,"maxprot":5}],{"name":"__DATA","vmaddr":565248,"vmsize":13152256,"fileoff":565248,
"filesize":20480,"maxprot":3}],{"name":"__LINKEDIT","vmaddr":13717504,"vmsize":438272,"fileoff":585728,
"filesize":435008,"maxprot":1}]]}]]}]#00
```
This just fetches the last package which has fetch_all_solibs and we know
it will contain the image of our test executable to get the tests running again.
This test is flaky on Green Dragon as it often fails when the process state
is "Invalid" in the assert:
self.assertEqual(process.GetState(), lldb.eStateExited)
It seems this is related to just doing "run" which apparently invalidates
the Target's process in case it's still running and needs to be restarted.
Just doing 'continue' on the process (and ignoring the error in case it already
finished) prevents that and makes this consistently pass for me.
Just pushing this out to get Green Dragon back online.
The search for the complete class definition can also produce entries
which are not of the expected type. This can happen for instance when
there is a function with the same name as the class we're looking up
(which means that the class needs to be disambiguated with the
struct/class tag in most contexts).
Previously we were just picking the first Decl that the lookup returned,
which later caused crashes or assertion failures if it was not of the
correct type. This patch changes that to search for an entry of the
correct type.
Differential Revision: https://reviews.llvm.org/D85904
There are two implementations for `TypeSystemMap::GetTypeSystemForLanguage`
which are both identical beside one taking a `Module` and one taking a `Target`
(and then passing that argument to the `TypeSystem::CreateInstance` function).
This merges both implementations into one function with a lambda that wraps the
different calls to `TypeSystem::CreateInstance`.
Reviewed By: #lldb, JDevlieghere
Differential Revision: https://reviews.llvm.org/D82537
This is relanding D81001. The patch originally failed as on newer editline
versions it seems CC_REFRESH will move the cursor to the start of the line via
\r and then back to the original position. On older editline versions like
the one used by default on macOS, CC_REFRESH doesn't move the cursor at all.
As the patch changed the way we handle tab completion (previously we did
REDISPLAY but now we're doing CC_REFRESH), this caused a few completion tests
to receive this unexpected cursor movement in the output stream.
This patch updates those tests to also accept output that contains the specific
cursor movement commands (\r and then \x1b[XC). lldbpexpect.py received an
utility method for generating the cursor movement escape sequence.
Original summary:
I implemented autosuggestion if there is one possible suggestion.
I set the keybinds for every character. When a character is typed, Editline::TypedCharacter is called.
Then, autosuggestion part is displayed in gray, and you can actually input by typing C-k.
Editline::Autosuggest is a function for finding completion, and it is like Editline::TabCommand now, but I will add more features to it.
Testing does not work well in my environment, so I can't confirm that it goes well, sorry. I am dealing with it now.
Reviewed By: teemperor, JDevlieghere, #lldb
Differential Revision: https://reviews.llvm.org/D81001
The function had very complicated signature, because it was trying to
avoid making unnecessary copies of the Scalar object. However, this
class is not hot enough to worry about these kinds of optimizations. My
making copies unconditionally, we can simplify the function and all of
its call sites.
Differential Revision: https://reviews.llvm.org/D85906
When LLDB sees only one possible completion for an input, it will add a trailing
space to the completion to signal that to the user. If the current argument is
quoted, that also means LLDB needs to add the trailing quote to finish the
current argument first.
In case the user is in a function with only one local variable and is currently
editing an empty line in the multiline expression editor, then we are in the
unique situation where we can have a unique completion for an empty input line.
(In a normal LLDB session this would never occur as empty input would just list
all the possible commands).
In this special situation our check if the current argument needs to receive a
trailing quote will crash LLDB as there is no current argument and the
completion code just unconditionally tries to access the current argument. This
just adds the missing check if we even have a current argument before we check
if we need to add a terminating quote character.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85903
- Print the replay invocation.
- Keep the reproducer around.
- Return the "opposite" exit code so we don't have to rely on FileCheck
to fail the test when the expected exit code is non-zero.
When bit-field data was stored in a Scalar in ValueObjectChild during UpdateValue()
it was extracting the bit-field value. Later on in lldb_private::DumpDataExtractor(…)
we were again attempting to extract the bit-field. Which would then not obtain the
correct value. This will remove the extra extraction in UpdateValue().
We hit this specific case when values are passed in registers, which we could only
reproduce in an optimized build.
Differential Revision: https://reviews.llvm.org/D85376
Some of the test methods were already skipped because of an unexpected
packet. The test started failing after it was expanded. Skip the whole
test with reproducers so we don't have to add the decorator for every
method.
After moving python.swig and lua.swig into their respective
subdirectories, the relative paths in these files were out of date. This
fixes that and ensures the appropriate include paths are set in the SWIG
invocation.
Differential revision: https://reviews.llvm.org/D85859
Apparently when the strings are created, the `'\n'` is converted to the
platform's natural new line indicator, which is CR+LF on Windows. But
upon reading back with `sscanf`, the CRs caused a matching failure.
This patch configures LLDB.framework to build as a flat unversioned
framework on non-macOS Darwin targets, which have never supported the
macOS framework layout.
This patch also renames the 'IOS' cmake variable to 'APPLE_EMBEDDED' to
reflect the fact that lldb is built for several different kinds of embedded
Darwin targets, not just iOS.
Differential Revision: https://reviews.llvm.org/D85770
This reverts commit 246afe0cd1. This broke
the following tests on Linux it seems:
lldb-api :: commands/expression/multiline-completion/TestMultilineCompletion.py
lldb-api :: iohandler/completion/TestIOHandlerCompletion.py
I implemented autosuggestion if there is one possible suggestion.
I set the keybinds for every character. When a character is typed, Editline::TypedCharacter is called.
Then, autosuggestion part is displayed in gray, and you can actually input by typing C-k.
Editline::Autosuggest is a function for finding completion, and it is like Editline::TabCommand now, but I will add more features to it.
Testing does not work well in my environment, so I can't confirm that it goes well, sorry. I am dealing with it now.
Reviewed By: teemperor, JDevlieghere, #lldb
Differential Revision: https://reviews.llvm.org/D81001
expect_expr currently can't verify the children of the result SBValue.
This patch adds the ability to check them. The idea is to have a CheckValue
class where one can specify what attributes of a SBValue should be checked.
Beside the properties we already check for (summary, type, etc.) this also
has a list of children which is again just a list of CheckValue object (which
can also have children of their own).
The main motivation is to make checking the children no longer based
on error-prone substring checks that allow tests to pass just because
for example the error message contains the expected substrings by accident.
I also expect that we can just have a variant of `expect_expr` for LLDB's
expression paths (aka 'frame var') feature.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D83792
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
When loading a PE/COFF target, the associated PDB file often wasn't
found. The executable module contains a path for the associated PDB
file, but people often debug from a different directory than the one
their build system uses. (This is especially common in post-mortem
and cross platform debugging.)
Suppose the COFF executable being debugged is `~/proj/foo.exe`, but
it was built elsewhere and refers to `D:\remote\build\env\foobar.pdb`,
LLDB wouldn't find it.
With this change, if no file exists at the PDB path, LLDB will look
in the executable directory for a PDB file that matches the name of
the one it expected (e.g., `~/proj/foobar.pdb`). If found, the PDB
is subject to the same matching criteria (GUIDs and age) as would
have been used had it been in the original location.
This same-directory-as-the-binary rule is commonly used by debuggers
on Windows.
Differential Review: https://reviews.llvm.org/D84815
The current code fails when the first stderr line doesn't match the
given regex to parse the PID. This patch changes the code to read the
first 10 lines before giving up. It also adds tracing for the simctl
commands.
Separate the CMake logic for Lua and Python to clearly distinguish
between code specific to either scripting language and the code shared
by both.
What this patch does is:
- Move Python specific code into the bindings/python subdirectory.
- Move the Lua specific code into the bindings/lua subdirectory.
- Add the _python suffix to Python specific functions/targets.
- Fix a dependency issue that would check the binding instead of
whether the scripting language is enabled.
Note that this patch also changes where the bindings are generated,
which might affect downstream projects that check them in.
Differential revision: https://reviews.llvm.org/D85708
These definitions are needed by any file which uses gtest. Previously we
were adding them in the add_unittest function, but over time we've
accumulated libraries (which don't go through add_unittest) building on
gtest and this has resulted in proliferation of the definitions.
Making this a part of the library interface enables them to be managed
centrally. This follows a patch for -Wno-suggest-override (D84554) which
took a similar approach.
Differential Revision: https://reviews.llvm.org/D84748
Like the other type sugar removed by RemoveWrappingTypes, SubstTemplateTypeParm
is just pure sugar that should be ignored. If we don't ignore it (as we do now),
LLDB will fail to read values from record fields that have a
SubstTemplateTypeParm type.
Only way to produce such a type in LLDB is to either use the `import-std-module`
setting to get a template into the expression parser or just create your own
template directly in the expression parser which is what we do in the test.
Reviewed By: jarin
Differential Revision: https://reviews.llvm.org/D85132
1. Added a common completion WatchPointIDs to complete with a list of the IDs of the current watchpoints;
2. Applied the completion to these commands: watchpoint delete/enable/disable/modify/ignore;
3. Added a correlated test case.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D84104
1. Added a common completion completing with a list of the threads of the current process;
2. Apply the common completion above to these commands: thread
continue/info/exception/select/step-in/step-inst/step-inst-over/step-out/step-over/step-script
3. Correlated test case test_common_completion_thread_index.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D84088
1. Added a common completion StopHookIDs to provide completion with a list of stop hook ids;
2. Applied the common completion to commands: `target stop-hook delete/enable/disable';
3. Added an related test case.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D84123
1. Added a common completion ModuleUUIDs to provide a list of the UUIDs of modules for completion;
2. Added a new enumeration item eArgTypeModuleUUID to CommandArgumentType which is set as the option argument type of OptionGroupUUID;
3. Applied the module UUID completion to the argument of the type eArgTypeModuleUUID in lldb/source/Interpreter/CommandObject.cpp;
4. Added an related test case in lldb/test/API/functionalities/completion/TestCompletion.py.
Commands frame select and thread backtrace -s can be completed in the same way.
Moved the dedicated completion of frame select into a common completion and
apply it to the both commands, along with the test modified.
Dedicated completion for the command `target modules search-paths insert` with a test case.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D83309
1. Added a new common completion TypeLanguages to provide a list of supporting languages;
2. Bound the completion to eArgTypeLanguage;
3. Added a related test case.
Dedicated completion for the command `thread plan discard` with a corresponding
test case.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D83234
No one is calling this function it seems and according to
https://bugs.llvm.org/show_bug.cgi?id=47088 this can leak memory, so let's just
remove it:
Quote from the bug report:
> Before return on line 146, the memory allocated on line 130 is not freed.
Reviewed By: amccarth
Differential Revision: https://reviews.llvm.org/D85633
1.Added a new common completion DisassemblyFlavors;
2. Bound DisassemblyFlavors to argument of type eArgTypeDisassemblyFlavor in
CommandObject.cpp;
3. Added a related test case.
1. Applied the common completion `eVariablePathCompletion` to command
`watchpoint set variable`;
2. Added a related test case.
Reviewed By: teemperor, JDevlieghere
Differential Revision: https://reviews.llvm.org/D84177
1. Applied the common completion `eDiskFileCompletion` to the first argument of
the command `platform target-install`.
2. Added a related test case.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D84179
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Muhammad Omair Javaid