There are plenty of ways attaching can go wrong. Having the server
report the exact error means we can give better feedback to the user.
(This patch does not do the second part, it only makes sure the
information is sent from the server.)
Triggering all possible error conditions in a test would prove
challenging, but there is one error that is very easy to reproduce
(attempting to attach while debugging), so I write a test based on that.
The test immediately exposed a bug where the m_send_error_strings field
was being used uninitialized (so it was sometimes true from the get-go),
so I fix that as well.
llvm-svn: 329803
Summary:
We've had a mismatch in the checksum computation between the sender and
receiver. The sender computed the payload checksum using the wire
encoding of the packet, while the receiver did this after expanding
un-escaping and expanding run-length-encoded sequences. This resulted in
communication breakdown if packets using these feature were sent in the
ack mode.
Normally, this did not cause any issues since the only packet we send in
the ack-mode is the QStartNoAckMode packet, but I ran into this when
debugging the lldb-server tests which (for better or worse) don't use
this mode.
According to the gdb-remote documentation "The two-digit checksum is computed as
the modulo 256 sum of all characters between the leading ‘$’ and the
trailing ‘#’", it seems that our sender is doing the right thing here.
Therefore, I fix the receiver the match the sender behavior and add a
test.
With this bug fixed, we can see that lldb-server is sending a stop-reply
after receiving the "k" in the same way as debugserver does (but we
weren't detecting this because at that point the connection was dead
already). I fix that expectation as well.
Reviewers: clayborg, jasonmolenda
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D44922
llvm-svn: 328693
The lldb-server unit tests don't test the right thing when the debug
server in use is copied from somewhere else. This can lead to spurious
test failures.
Disable these unit tests when an external debug server is in use.
Fixes llvm.org/PR36494.
llvm-svn: 326001
Summary:
The issue was that we were parsing the registers into 64-bit integers
and the calling swapByteOrder without regard for the actual size of the
register. This switches the test to use the RegisterValue class which
tracks the register size, and knows how to initialize itself from a
piece of memory (so we don't need to swap byte order ourselves).
Reviewers: eugene, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43376
llvm-svn: 325511
Summary:
Right now the test client is not parsing register values correctly,
which is manifesting itself in one test failing on 32-bit architectures
(pr36013). This parses the information from the qRegisterInfo packets
and stores it in the client, which will enable fixing the parsing in a
follow up commit.
I am also adding a new templated SendMessage overload, which enables one
to send a message get a parsed response in a single call.
Reviewers: eugene, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43076
llvm-svn: 324722
Summary:
There was some confusion in the code about how to represent process
environment. Most of the code (ab)used the Args class for this purpose,
but some of it used a more basic StringList class instead. In either
case, the fact that the underlying abstraction did not provide primitive
operations for the typical environment operations meant that even a
simple operation like checking for an environment variable value was
several lines of code.
This patch adds a separate Environment class, which is essentialy a
llvm::StringMap<std::string> in disguise. To standard StringMap
functionality, it adds a couple of new functions, which are specific to
the environment use case:
- (most important) envp conversion for passing into execve() and likes.
Instead of trying to maintain a constantly up-to-date envp view, it
provides a function which creates a envp view on demand, with the
expectation that this will be called as the very last thing before
handing the value to the system function.
- insert(StringRef KeyEqValue) - splits KeyEqValue into (key, value)
pair and inserts it into the environment map.
- compose(value_type KeyValue) - takes a map entry and converts in back
into "KEY=VALUE" representation.
With this interface most of the environment-manipulating code becomes
one-liners. The only tricky part was maintaining compatibility in
SBLaunchInfo, which expects that the environment entries are accessible
by index and that the returned const char* is backed by the launch info
object (random access into maps is hard and the map stores the entry in
a deconstructed form, so we cannot just return a .c_str() value). To
solve this, I have the SBLaunchInfo convert the environment into the
"envp" form, and use it to answer the environment queries. Extra code is
added to make sure the envp version is always in sync.
(This also improves the layering situation as Args was in the Interpreter module
whereas Environment is in Utility.)
Reviewers: zturner, davide, jingham, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41359
llvm-svn: 322174
Summary:
Make sure we propagate environment when starting debugserver with a pre-loaded
inferior. AFAIK, RNBRunLoopLaunchInferior is only called in pre-loaded inferior
scenario, so we can just pick up the debugserver environment instead of trying
to construct an envp from the (empty) context.
This makes debugserver pass an test added for an equivalent lldb-server fix.
Reviewers: jasonmolenda, clayborg
Subscribers: JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D41352
llvm-svn: 321355
Summary:
We were failing to propagate the environment when lldb-server was
started with a pre-loaded process
(e.g.: lldb-server gdbserver -- inferior --inferior_args)
This patch makes sure the environment is propagated. Instead of adding a
new GDBRemoteCommunicationServerLLGS::SetLaunchEnvironment function to
complement SetLaunchArgs and SetLaunchFlags, I replace these with a
more generic SetLaunchInfo, which can be used to set any launch-related
property.
The accompanying test also verifies that the server correctly terminates
the connection after sending the exit packet (specifically, that it does
not send the exit packet twice).
Reviewers: clayborg, eugene
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41070
llvm-svn: 320984
Summary:
lldb-server was sending the "exit" packet (W??) twice. This happened
because it was handling both the pre-exit (PTRACE_EVENT_EXIT) and
post-exit (WIFEXITED) as exit events. We had some code which was trying
to detect when we've already sent the exit packet, but this stopped
working quite a while ago.
This never really caused any problems in practice because the client
automatically closes the connection after receiving the first packet, so
the only effect of this was some warning messages about extra packets
from the lldb-server test suite, which were ignored because they didn't
fail the test.
The new test suite will be stricter about this, so I fix this issue
ignoring the first event. I think this is the correct behavior, as the
inferior is not really dead at that point, so it's premature to send the
exit packet.
There isn't an actual test yet which would verify the exit behavior, but
in my next patch I will add a test which will also test this
functionality.
Reviewers: eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41069
llvm-svn: 320961
Summary:
This makes StopReply class abstract, so that we can represent different
types of stop replies such as StopReplyStop and StopReplyExit (there
should also be a StopReplySignal, but I don't need that right now so I
haven't implemented it yet).
This prepares the ground for a new test I'm writing.
Reviewers: eugene, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41067
llvm-svn: 320820
Summary:
Adding a new test would require one to duplicate a significant part of
the existing test that we have. This attempts to reduce that by moving
some part of that code to the test fixture. The StandardStartupTest
fixture automatically starts up the server and connects it to the
client. I also add a more low-level TestBase fixture, which allows one
to start up the client and server in a custom way (I am going to need
this for the test I am writing).
Reviewers: eugene, zturner
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41066
llvm-svn: 320809
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
Summary:
These tests used to log the error message and return plain bool mainly
because at the time they we written, we did not have a nice way to
assert on llvm::Error values. That is no longer true, so replace this
pattern with a more idiomatic approach.
As a part of this patch, I also move the formatting of
GDBRemoteCommunication::PacketResult values out of the test code, as
that can be useful elsewhere.
Reviewers: zturner, eugene
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D39790
llvm-svn: 317795
Summary:
Without this, the launching of the test inferior may fail if it depends
on some component of the environment (most likely LD_LIBRARY_PATH). This
makes sure we propagate the environment variable to the inferior
process.
Reviewers: eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39010
llvm-svn: 316244
Summary:
This adds support for running the lldb-server test suite (currently consisting
of only one test) against the debugserver. Currently, the choice which binary
to test is based on the host system. This will need to be replaced by something
more elaborate if/when lldb-server starts supporting debugging on darwin.
I need to make a couple of tweaks to the test client to work with debugserver:
- debugserver has different command-line arguments - launching code adjusted to
handle that
- debugserver sends duplicate "medata" fields in the stop reply packet -
adjusted stop-reply parsing code to handle that
- debugserver replies to the k packet instead of just dropping the connection -
stopping code adjusted, although we should probably consider aligning the
behavior of the two stubs in this case
Reviewers: jmajors, beanz
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D35311
llvm-svn: 316010
Summary:
It had a dependency on StringConvert and file reading code, which is not
in Utility. I've replaced that code by equivalent llvm operations.
I've added a unit test to demonstrate that parsing a file still works.
Reviewers: zturner, jingham
Subscribers: kubamracek, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34625
llvm-svn: 306394
Summary:
ProcessLauncherPosix was using posix_spawn for launching the process,
but this function is not available on all platforms we support, and even
where it was avaialable, it did not support the full range of options we
require for launching (most importantly, launching in stop-on-entry
mode). For these reasons, the set of ifdefs around these functions has
grown untractably large, and we were forced to implement our own
launcher from more basic primitives anyway (ProcessLauncherPosixFork --
used on Linux, Android, and NetBSD).
Therefore, I remove this class, and move the relevant parts of the code
to the darwin-specific Host.mm file. This is the platform that code was
originally written for anyway, and it's the only platform where this
implementation makes sense (e.g. the lack of the "thread-specific
working directory" concept makes these functions racy on all other
platforms). This allows us to remove a lot of ifdefs and simplify the
code.
Effectively, the only change this introduces is that FreeBSD will now
use the fork-based launcher instead of posix_spawnp. That sholdn't be a
problem as this approach works at least on one other BSD-based system
already.
Reviewers: krytarowski, emaste, jingham
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34236
llvm-svn: 305686
Summary:
This is a new C++ test framework based on Google Test, and one working
example test.
The intention is to replace the existing tests in
packages/Python/lldbsuite/test/tools/lldb-server/ with this suite
and use this framework for all new client server tests.
Reviewers: labath, beanz
Reviewed By: labath, beanz
Subscribers: beanz, emaste, zturner, tberghammer, takuto.ikuta, krytarowski, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D32930
Patch by Jason Majors <jmajors@google.com>
llvm-svn: 304793
Pavel Labath