Replace bidirectional flow analysis to compute liveness with forward
analysis pass. Treat lifetimes as starting when there is a first
reference to the stack slot, as opposed to starting at the point of the
lifetime.start intrinsic, so as to increase the number of stack
variables we can overlap.
Reviewers: gbiv, qcolumbet, wmi
Differential Revision: http://reviews.llvm.org/D18827
Bug: 25776
llvm-svn: 270559
Before r269750 we did the comparisons in this loop in signed ints so
that it DTRT when MinCSFrameIndex was 0. This was changed because it's
now possible for MinCSFrameIndex to be UINT_MAX, but that introduced a
bug when we were comparing `>= 0` - this is tautological in unsigned.
Rework the comparisons here to avoid issues with unsigned wrapping.
No test. I couldn't find a way to get any of the StackGrowsUp in-tree
targets to reach the code that sets MinCSFrameIndex.
llvm-svn: 270492
This effectively revers commit r270389 and re-lands r270106, but it's
almost a rewrite.
The behavior change in r270106 was that we could no longer assume that
each LF_FUNC_ID record got its own type index. This patch adds a map
from DINode* to TypeIndex, so we can stop making that assumption.
This change also emits padding bytes between type records similar to the
way MSVC does. The size of the type record includes the padding bytes.
llvm-svn: 270485
Summary:
MBBs don't necessarily have a name (in my experience, they almost never
do), in which case this logging is quite unhelpful. The number seems to
work well.
Reviewers: iteratee
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20533
llvm-svn: 270477
This will pave the way to introduce a full fledged symbol visitor
similar to how we have a type visitor, thus allowing the same
dumping code to be used in llvm-readobj and llvm-pdbdump.
Differential Revision: http://reviews.llvm.org/D20384
Reviewed By: rnk
llvm-svn: 270475
This fixes a bug introduced in:
r262115 - CodeGen: Take MachineInstr& in SlotIndexes and LiveIntervals, NFC
The iterator End here might == MBB->end(), and so we can't unconditionally
dereference it. This often goes unnoticed (I don't have a test case that always
crashes, and ASAN does not catch it either) because the function call arguments are
turned right back into iterators. MachineInstrBundleIterator's constructor,
however, does have an assert which might randomly fire.
llvm-svn: 270323
Prior to this patch, we were using 1 for all the repairing costs.
Now, we use the information from the target to get this information.
llvm-svn: 270304
We now use LiveRangeCalc::extendToUses() instead of a specially designed
algorithm in constructMainRangeFromSubranges():
- The original motivation for constructMainRangeFromSubranges() were
differences between the main liverange and subranges because of hidden
dead definitions. This case however cannot happen anymore with the
DetectDeadLaneMasks pass in place.
- It simplifies the code.
- This fixes a longstanding bug where we did not properly create new SSA
values on merging control flow (the MachineVerifier missed most of
these cases).
- Move constructMainRangeFromSubranges() to LiveIntervalAnalysis and
LiveRangeCalc to better match the implementation/available helper
functions.
This re-applies r269016. The fixes from r270290 and r270259 should avoid
the machine verifier problems this time.
llvm-svn: 270291
It is fine for subregister ranges to be undefined on some CFG paths as
we may have a "vregX:other_subreg<read-undef> =" def on that path. We
do not (and should not) have live segments for the subregister ranges.
The MachineVerifier should not complain about this.
This is a slight variant of http://llvm.org/PR27705
llvm-svn: 270290
Depending on the compiler used to build LLVM, llvm_unreachable can either
expand to a call to abort(), or to a __builtin_unreachable. The latter
does not have a predictable behavior at runtime.
llvm-svn: 270260
Fix renameDisconnectedComponents() creating vreg uses that can be
reached from function begin withouthaving a definition (or explicit
live-in). Fix this by inserting IMPLICIT_DEF instruction before
control-flow joins as necessary.
Removes an assert from MachineScheduler because we may now get
additional IMPLICIT_DEF when preparing the scheduling policy.
This fixes the underlying problem of http://llvm.org/PR27705
llvm-svn: 270259
This gives AsmPrinter a chance to initialize its DD field before
we call beginModule(), which is about to start using it.
Differential Revision: http://reviews.llvm.org/D20413
llvm-svn: 270258
We are about to start using DIEDwarfExpression to create global variable
DIEs, which happens before we generate code for functions.
Differential Revision: http://reviews.llvm.org/D20412
llvm-svn: 270257
The Fast mode takes the first mapping, the greedy mode loops over all
the possible mapping for an instruction and choose the cheaper one.
Test case will come with target specific code, since we currently do not
have instructions that have several mappings.
llvm-svn: 270249
computeMapping.
Computing the cost of a mapping takes some time.
Since in Fast mode, the cost is irrelevant, just spare some cycles by not
computing it.
In Greedy mode, we need to choose the best cost, that means that when
the local cost gets more expensive than the best cost, we can stop
computing the repairing and cost for the current mapping.
llvm-svn: 270245
The previous choice of the insertion points for repairing was
straightfoward but may introduce some basic block or edge splitting. In
some situation this is something we can avoid.
For instance, when repairing a phi argument, instead of placing the
repairing on the related incoming edge, we may move it to the previous
block, before the terminators. This is only possible when the argument
is not defined by one of the terminator.
llvm-svn: 270232
an instruction.
Use the previously introduced RepairingPlacement class to split the code
computing the repairing placement from the code doing the actual
placement. That way, we will be able to consider different placement and
then, only apply the best one.
llvm-svn: 270168
When assigning the register banks we may have to insert repairing code
to move already assigned values accross register banks.
Introduce a few helper classes to keep track of what is involved in the
repairing of an operand:
- InsertPoint and its derived classes record the positions, in the CFG,
where repairing has to be inserted.
- RepairingPlacement holds all the insert points for the repairing of an
operand plus the kind of action that is required to do the repairing.
This is going to be used to keep track of how the repairing should be
done, while comparing different solutions for an instruction. Indeed, we
will need the repairing placement to capture the cost of a solution and
we do not want to compute it a second time when we do the actual
repairing.
llvm-svn: 270167
register bank twice.
Prior to this change, we were checking if the assignment for the current
machine operand was matching, then we would check if the mismatch
requires to insert repair code.
We actually already have this information from the first check, so just
pass it along.
NFCI.
llvm-svn: 270166
Sorry for the lack testcase. There is one in the pr, but it depends on
std::sort and the .ll version is 110 lines, so I don't think it is
wort it.
The bug was that we were sorting after adding a terminator, and the
sorting algorithm could end up putting the terminator in the middle of
the List vector.
With that we would create a Spans map entry keyed on nullptr which would
then be added to CUs and fail in that sorting.
llvm-svn: 270165
This helper class will be used to represent the cost of mapping an
instruction to a specific register bank.
The particularity of these costs is that they are mostly local, thus the
frequency of the basic block is irrelevant. However, for few
instructions (e.g., phis and terminators), the cost may be non-local and
then, we need to account for the frequency of the involved basic blocks.
This will be used by the greedy mode I am working on.
llvm-svn: 270163
Using Chandler's words from r265331:
This commit was greatly exacerbating PR17409 and effectively regressed
build time for lot of (very large) code when compiled with ASan or MSan.
PR17409 is fixed by r269249, so this is fine to reapply r263460.
Original commit message:
The bad behavior happens when we have a function with a long linear
chain of basic blocks, and have a live range spanning most of this
chain, but with very few uses.
Let say we have only 2 uses.
The Hopfield network is only seeded with two active blocks where the
uses are, and each iteration of the outer loop in
`RAGreedy::growRegion()` only adds two new nodes to the network due to
the completely linear shape of the CFG. Meanwhile,
`SpillPlacer->iterate()` visits the whole set of discovered nodes, which
adds up to a quadratic algorithm.
This is an historical accident effect from r129188.
When the Hopfield network is expanding, most of the action is happening
on the frontier where new nodes are being added. The internal nodes in
the network are not likely to be flip-flopping much, or they will at
least settle down very quickly. This means that while
`SpillPlacer->iterate()` is recomputing all the nodes in the network, it
is probably only the two frontier nodes that are changing their output.
Instead of recomputing the whole network on each iteration, we can
maintain a SparseSet of nodes that need to be updated:
- `SpillPlacement::activate()` adds the node to the todo list.
- When a node changes value (i.e., `update()` returns true), its
neighbors are added to the todo list.
- `SpillPlacement::iterate()` only updates the nodes in the list.
The result of Hopfield iterations is not necessarily exact. It should
converge to a local minimum, but there is no guarantee that it will find
a global minimum. It is possible that updating nodes in a different
order will cause us to switch to a different local minimum. In other
words, this is not NFC, but although I saw a few runtime improvements
and regressions when I benchmarked this change, those were side effects
and actually the performance change is in the noise as expected.
Huge thanks to Jakob Stoklund Olesen <stoklund@2pi.dk> for his
feedbacks, guidance and time for the review.
llvm-svn: 270149
When matching an interleaved load to an ldN pattern, the interleaved access
pass checks that all users of the load are shuffles. If the load is used by an
instruction other than a shuffle, the pass gives up and an ldN is not
generated. This patch considers users of the load that are extractelement
instructions. It attempts to modify the extracts to use one of the available
shuffles rather than the load. After the transformation, the load is only used
by shuffles and will then be matched with an ldN pattern.
Differential Revision: http://reviews.llvm.org/D20250
llvm-svn: 270142
A baby step toward translating DIType records to CodeView.
This does not (yet) combine the record length with the record data. I'm going back and forth trying to determine if that's a good idea.
llvm-svn: 270106
Previously, specifying -post-RA-scheduler=true had the side effect of
disabling the antidependency breaker, yielding different behavior than
if the post-RA-scheduler was enabled via the scheduling model.
Differential Revision: http://reviews.llvm.org/D20186
llvm-svn: 270077
There are at least 2 places (DAGCombiner, X86ISelLowering) where this could be used instead
of ad-hoc and watered down code that is trying to match a power-of-2 pattern.
Differential Revision: http://reviews.llvm.org/D20439
llvm-svn: 270073
When looking for an available spill slot, the register scavenger would stop
after finding the first one with no register assigned to it. That slot may
have size and alignment that do not meet the requirements of the register
that is to be spilled. Instead, find an available slot that is the closest
in size and alignment to one that is needed to spill a register from RC.
Differential Revision: http://reviews.llvm.org/D20295
llvm-svn: 269969
with an additional fix to make RegAllocFast ignore undef physreg uses. It would
previously get confused about the "push %eax" instruction's use of eax. That
method for adjusting the stack pointer is used in X86FrameLowering::emitSPUpdate
as well, but since that runs after register-allocation, we didn't run into the
RegAllocFast issue before.
llvm-svn: 269949
* Reworks the CVSymbolTypes.def to work similarly to TypeRecords.def.
* Moves some enums from SymbolRecords.h to CodeView.h to maintain
consistency with how we do type records.
* Generalize a few simple things like the record prefix
* Define the leaf enum and the kind enum similar to how we do with tyep
records.
Differential Revision: http://reviews.llvm.org/D20342
Reviewed By: amccarth, rnk
llvm-svn: 269867
instead of having DwarfUnit query the debugger tuning options.
Follow-up commmit to r269827.
Thanks to Paul Robinson for pointing this out!
llvm-svn: 269840
As discovered in PR27758, GDB does not fully support the DWARF 4 format.
This patch ensures we always emit bitfields in the DWARF 2 when tuning for GDB.
llvm-svn: 269827
When processing inline asm that contains errors, make sure we can recover
gracefully by creating an UNDEF SDValue for the inline asm statement before
returning from SelectionDAGBuilder::visitInlineAsm. This is necessary for
consumers that don't exit on the first error that is emitted (e.g. clang)
and that would assert later on.
Fixes PR24071.
Patch by Diana Picus.
llvm-svn: 269811
Since r207518 they are printed exactly like non-hidden stubs on x86 and
since r207517 on ARM.
This means we can use a single set for all stubs in those platforms.
llvm-svn: 269776
PrologEpilogInserter has these 3 phases, which are related, but not
all of them are needed by all targets. This patch reorganizes PEI's
varous functions around those phases for more clear separation. It also
introduces a new TargetMachine hook, usesPhysRegsForPEI, which is true
for non-virtual targets. When it is true, all the phases operate as
before, and PEI requires the AllVRegsAllocated property on
MachineFunctions. Otherwise, CSR spilling and scavenging are skipped and
only prolog/epilog insertion/frame finalization is done.
Differential Revision: http://reviews.llvm.org/D18366
llvm-svn: 269750