Updating remark API to newer OptimizationDiagnosticInfo API. This
allows remarks to show up in diagnostic yaml file, and enables use
of opt-viewer tool.
Hotness information for remarks (L505 and L751) do not display hotness
information, most likely due to profile information not being
propagated yet. Unsure if this is the desired outcome.
Patch by Tarun Rajendran.
Differential Revision: https://reviews.llvm.org/D36127
llvm-svn: 310763
This also corrects the description to match what was actually implemented. The old comment said X^(C1|C2), but it implemented X^((C1|C2)&~(C1&C2)). I believe ((C1|C2)&~(C1&C2)) is equivalent to (C1^C2).
Differential Revision: https://reviews.llvm.org/D36505
llvm-svn: 310658
We used to try to truncate the constant vector to vXi1, but if it's already i1 this would fail. Instead we now use IRBuilder::getZExtOrTrunc which should check the type and only create a trunc if needed. I believe this should trigger constant folding in the IRBuilder and ultimately do the same thing just with the additional type check.
llvm-svn: 310639
Current behavior is to transform these independently of the datalayout.
There's a proposal to change this in D35035:
https://reviews.llvm.org/D35035
llvm-svn: 310611
I couldn't find any smaller folds to help the cases in:
https://bugs.llvm.org/show_bug.cgi?id=34046
after:
rL310141
The truncated rotate-by-variable patterns elude all of the existing transforms because
of multiple uses and knowledge about demanded bits and knownbits that doesn't exist
without the whole pattern. So we need an unfortunately large pattern match. But by
simplifying this pattern in IR, the backend is already able to generate
rolb/rolw/rorb/rorw for x86 using its existing rotate matching logic (although
there is a likely extraneous 'and' of the rotate amount).
Note that rotate-by-constant doesn't have this problem - smaller folds should already
produce the narrow IR ops.
Differential Revision: https://reviews.llvm.org/D36395
llvm-svn: 310509
The recently improved support for `icmp` in ValueTracking
(r307304) exposes the fact that `isImplied` condition doesn't
really bail out if we hit the recursion limit (and calls
`computeKnownBits` which increases the depth and asserts).
Differential Revision: https://reviews.llvm.org/D36512
llvm-svn: 310481
When a new phi is generated for scalarpre of an expression, the phiTranslate cache
will become stale: Before PRE, the candidate expression must not be available in a
predecessor block, and phitranslate will cache the information. After PRE, the
expression will become available in all predecessor blocks, so the related entries
in phiTranslate cache becomes stale. The patch will simply remove the stale entries
so phiTranslate can be recomputed next time.
The stale entries in phitranslate cache will not affect correctness but will cause
missing PRE opportunity for later instructions.
Differential Revision: https://reviews.llvm.org/D36124
llvm-svn: 310421
Summary: Currently, ICP checks the count against a fixed value to see if it is hot enough to be promoted. This does not work for SamplePGO because sampled count may be much smaller. This patch uses PSI to check if the count is hot enough to be promoted.
Reviewers: davidxl, tejohnson, eraman
Reviewed By: davidxl
Subscribers: sanjoy, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D36341
llvm-svn: 310416
We already support pulling through an add with constant RHS. We can do the same for subtract.
Differential Revision: https://reviews.llvm.org/D36443
llvm-svn: 310407
Summary:
When vectorizing fcmps we can trip on incorrect cast assertion when setting the
FastMathFlags after generating the vectorized FCmp.
This can happen if the FCmp can be folded to true or false directly. The fix
here is to set the FastMathFlag using the FastMathFlagBuilder *before* creating
the FCmp Instruction. This is what's done by other optimizations such as
InstCombine.
Added a test case which trips on cast assertion without this patch.
Reviewers: Ayal, mssimpso, mkuper, gilr
Reviewed by: Ayal, mssimpso
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D36244
llvm-svn: 310389
results when a loop is completely removed.
This is very hard to manifest as a visible bug. You need to arrange for
there to be a subsequent allocation of a 'Loop' object which gets the
exact same address as the one which the unroll deleted, and you need the
LoopAccessAnalysis results to be significant in the way that they're
stale. And you need a million other things to align.
But when it does, you get a deeply mysterious crash due to actually
finding a stale analysis result. This fixes the issue and tests for it
by directly checking we successfully invalidate things. I have not been
able to get *any* test case to reliably trigger this. Changes to LLVM
itself caused the only test case I ever had to cease to crash.
I've looked pretty extensively at less brittle ways of fixing this and
they are actually very, very hard to do. This is a somewhat strange and
unusual case as we have a pass which is deleting an IR unit, but is not
running within that IR unit's pass framework (which is what handles this
cleanly for the normal loop unroll). And where there isn't a definitive
way to clear *all* of the stale cache entries. And where the pass *is*
updating the core analysis that provides the IR units!
For example, we don't have any of these problems with Function analyses
because it is easy to clear out function analyses when the functions
themselves may have been deleted -- we clear an entire module's worth!
But that is too heavy of a hammer down here in the LoopAnalysisManager
layer.
A better long-term solution IMO is to require that AnalysisManager's
make their keys durable to this kind of thing. Specifically, when
caching an analysis for one IR unit that is conceptually "owned" by
a higher level IR unit, the AnalysisManager should incorporate this into
its data structures so that we can reliably clear these results without
having to teach each and every pass to do so manually as we do here. But
that is a change for another day as it will be a fairly invasive change
to the AnalysisManager infrastructure. Until then, this fortunately
seems to be quite rare.
llvm-svn: 310333
The root cause of reverting was fixed - PR33514.
Summary:
The patch makes instruction count the highest priority for
LSR solution for X86 (previously registers had highest priority).
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D30562
From: Evgeny Stupachenko <evstupac@gmail.com>
<evgeny.v.stupachenko@intel.com>
llvm-svn: 310289
Note the original code I deleted incorrectly listed this as (X | C1) & C2 --> (X & C2^(C1&C2)) | C1 Which is only valid if C1 is a subset of C2. This relied on SimplifyDemandedBits to remove any extra bits from C1 before we got to that code.
My new implementation avoids relying on that behavior so that it can be naively verified with alive.
Differential Revision: https://reviews.llvm.org/D36384
llvm-svn: 310272
Patch tries to improve two-pass vectorization analysis, existing in SLP vectorizer. What it does:
1. Defines key nodes, that are the vectorization roots. Previously vectorization started if StoreInst or ReturnInst is found. For now, the vectorization started for all Instructions with no users and void types (Terminators, StoreInst) + CallInsts.
2. CmpInsts, InsertElementInsts and InsertValueInsts are stored in the
array. This array is processed only after the vectorization of the
first-after-these instructions key node is finished. Vectorization goes
in reverse order to try to vectorize as much code as possible.
Reviewers: mzolotukhin, Ayal, mkuper, gilr, hfinkel, RKSimon
Subscribers: ashahid, anemet, RKSimon, mssimpso, llvm-commits
Differential Revision: https://reviews.llvm.org/D29826
llvm-svn: 310260
Summary:
Patch tries to improve two-pass vectorization analysis, existing in SLP vectorizer. What it does:
1. Defines key nodes, that are the vectorization roots. Previously vectorization started if StoreInst or ReturnInst is found. For now, the vectorization started for all Instructions with no users and void types (Terminators, StoreInst) + CallInsts.
2. CmpInsts, InsertElementInsts and InsertValueInsts are stored in the array. This array is processed only after the vectorization of the first-after-these instructions key node is finished. Vectorization goes in reverse order to try to vectorize as much code as possible.
Reviewers: mzolotukhin, Ayal, mkuper, gilr, hfinkel, RKSimon
Subscribers: ashahid, anemet, RKSimon, mssimpso, llvm-commits
Differential Revision: https://reviews.llvm.org/D29826
llvm-svn: 310255
This patch expands the support of lowerInterleavedStore to 16x8i stride 4.
LLVM creates suboptimal shuffle code-gen for AVX2. In overall, this patch is a specific fix for the pattern (Strid=4 VF=16) and we plan to include more patterns in the future.
The patch goal is to optimize the following sequence:
At the end of the computation, we have ymm2, ymm0, ymm12 and ymm3 holding
each 16 chars:
c0, c1, , c16
m0, m1, , m16
y0, y1, , y16
k0, k1, ., k16
And these need to be transposed/interleaved and stored like so:
c0 m0 y0 k0 c1 m1 y1 k1 c2 m2 y2 k2 c3 m3 y3 k3 ....
Differential Revision: https://reviews.llvm.org/D35829
llvm-svn: 310252
Unfortunately, it looks like there's some other missed optimizations in the generated code for some of these cases. I'll try to look at some of those next.
llvm-svn: 310184
Previously we were always trying to emit the zext or truncate before any shift. This meant if the 'and' mask was larger than the size of the truncate we would skip the transformation.
Now we shift the result of the and right first leaving the bit within the range of the truncate.
This matches what we are doing in foldSelectICmpAndOr for the same problem.
llvm-svn: 310159
Pushes the sext onto the operands of a Sub if NSW is present.
Also adds support for propagating the nowrap flags of the
llvm.ssub.with.overflow intrinsic during analysis.
Differential Revision: https://reviews.llvm.org/D35256
llvm-svn: 310117
Summary:
The bug was uncovered after fix of PR23384 (part 3 of 3).
The patch restricts pointer multiplication in SCEV computaion for ICmpZero.
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D36170
From: Evgeny Stupachenko <evstupac@gmail.com>
<evgeny.v.stupachenko@intel.com>
llvm-svn: 310092
The frontend may have requested a higher alignment for any reason, and
downstream optimizations may already have taken advantage of it. We
should keep the same alignment when moving the allocation from the
parameter area to the local variable area.
Fixes PR34038
llvm-svn: 310071
Summary:
The (not (sext)) case is really (xor (sext), -1) which should have been simplified to (sext (xor, 1)) before we got here. So we shouldn't need to handle it.
With that taken care of we only need to two cases so don't need the swap anymore. This makes us in sync with the equivalent code in visitOr so inline this to match.
Reviewers: spatel, eli.friedman, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36240
llvm-svn: 310063
Name: narrow_shift
Pre: C1 < 8
%zx = zext i8 %x to i32
%l = lshr i32 %zx, C1
=>
%narrowC = trunc i32 C1 to i8
%ns = lshr i8 %x, %narrowC
%l = zext i8 %ns to i32
http://rise4fun.com/Alive/jIV
This isn't directly applicable to PR34046 as written, but we
need to have more narrowing folds like this to be sure that
rotate patterns are recognized.
llvm-svn: 310060
Summary:
This fixes PR31777.
If both stores' values are ConstantInt, we merge the two stores
(shifting the smaller store appropriately) and replace the earlier (and
larger) store with an updated constant.
In the future we should also support vectors of integers. And maybe
float/double if we can.
Reviewers: hfinkel, junbuml, jfb, RKSimon, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30703
llvm-svn: 310055
Summary:
This commit allows matchSelectPattern to recognize clamp of float
arguments in the presence of FMF the same way as already done for
integers.
This case is a little different though. With integers, given the
min/max pattern is recognized, DAGBuilder starts selecting MIN/MAX
"automatically". That is not the case for float, because for them only
full FMINNAN/FMINNUM/FMAXNAN/FMAXNUM ISD nodes exist and they do care
about NaNs. On the other hand, some backends (e.g. X86) have only
FMIN/FMAX nodes that do not care about NaNS and the former NAN/NUM
nodes are illegal thus selection is not happening. So I decided to do
such kind of transformation in IR (InstCombiner) instead of
complicating the logic in the backend.
Reviewers: spatel, jmolloy, majnemer, efriedma, craig.topper
Reviewed By: efriedma
Subscribers: hiraditya, javed.absar, n.bozhenov, llvm-commits
Patch by Andrei Elovikov <andrei.elovikov@intel.com>
Differential Revision: https://reviews.llvm.org/D33186
llvm-svn: 310054
Summary:
- add more tests
- pr27236.ll: rename %tmpN -> %N because otherwise a FileCheck
variable for newly appeared unnamed value would use the same name as
tmpN (as generated by update_test_checks.py)
- run update_test_checks.py
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: n.bozhenov, llvm-commits
Patch by Andrei Elovikov <andrei.elovikov@intel.com>
Differential Revision: https://reviews.llvm.org/D35002
llvm-svn: 310053
Sanjay Patel