Attribute nothrow is only allowed on functions, so I added that. Additionally,
it lacks any documentation, so I added some.
Differential Revision: https://reviews.llvm.org/D38202
llvm-svn: 314456
/code/llvm-project/llvm/unittests/ExecutionEngine/Orc/RTDyldObjectLinkingLayerTest.cpp:260:38: error: lambda capture 'this' is not used [-Werror,-Wunused-lambda-capture]
[this](decltype(ObjLayer)::ObjHandleT,
llvm-svn: 314454
Currently AMDGPU inline asm only allow v and s as register names in constraints.
This patch allows the following register names in constraints: (n, m is unsigned integer, n < m)
v
s
{vn} or {v[n]}
{sn} or {s[n]}
{S} , where S is a special register name
{v[n:m]}
{s[n:m]}
Differential Revision: https://reviews.llvm.org/D37568
llvm-svn: 314452
In setupEntryBlockAndCallSites in CodeGen/SjLjEHPrepare.cpp,
we fetch and store the actual frame pointer, but on return via
the longjmp intrinsic, it always was restored into the r7 variable.
On windows, the frame pointer should be restored into r11 instead of r7.
On Darwin (where sjlj exception handling is used by default), the frame
pointer is always r7, both in arm and thumb mode, and likewise, on
windows, the frame pointer always is r11.
On linux however, if sjlj exception handling is enabled (which it isn't
by default), libcxxabi and the user code can be built in differing modes
using different registers as frame pointer. Therefore, when restoring
registers on a platform where we don't always use the same register
depending on code mode, restore both r7 and r11.
Differential Revision: https://reviews.llvm.org/D38253
llvm-svn: 314451
We aren't do any in register extends here so we should be able to just the target independent nodes directly and allow them to be lowered as necessary.
llvm-svn: 314447
Summary:
Completion results look much nicer without them.
Informative qualifiers are stored for every method from a base class, even when
calling those methods does not require any qualifiers. For example,
struct Foo { int foo(); };
struct Bar : Foo { };
void test() { Bar(). // Completion item label was 'Foo::foo' before,
// but inserted text was simply 'foo'.
// We now simply show 'foo' in completion item label.
They effectively cluttered the completion list without providing much value.
Reviewers: bkramer, krasimir, rwols
Reviewed By: rwols
Subscribers: klimek, cfe-commits
Differential Revision: https://reviews.llvm.org/D38083
llvm-svn: 314445
to have child entries describing the template parameters. This will
be on by default for SCE tuning.
Differential Revision: https://reviews.llvm.org/D14358
llvm-svn: 314444
This patch implements the dwarfdump option --find=<name>. This option
looks for a DIE in the accelerator tables and dumps it if found. This
initial patch only adds support for .apple_names to keep the review
small, adding the other sections and pubnames support should be
trivial though.
Differential Revision: https://reviews.llvm.org/D38282
llvm-svn: 314439
JumpThreading now preserves dominance and lazy value information across the
entire pass. The pass manager is also informed of this preservation with
the goal of DT and LVI being recalculated fewer times overall during
compilation.
This change prepares JumpThreading for enhanced opportunities; particularly
those across loop boundaries.
Patch by: Brian Rzycki <b.rzycki@samsung.com>,
Sebastian Pop <s.pop@samsung.com>
Differential revision: https://reviews.llvm.org/D37528
llvm-svn: 314435
This would have found the issues with r313697.
The problem was that that commit mixed the content of different
.eh_frame sections. Unfortunately we had no tests looking inside the
fdes.
llvm-svn: 314433
Summary: If we have BWI instructions we can widen to v32i16 to do the multiply instead of splitting.
Reviewers: RKSimon, spatel, zvi
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38305
llvm-svn: 314432
Summary:
Adds a fallback mode to procmaps when the symbolizer
fails to locate a module for a given address by using
dl_iterate_phdr.
Reviewers: kubamracek, rnk, vitalybuka, eugenis
Reviewed By: eugenis
Subscribers: srhines, llvm-commits
Differential Revision: https://reviews.llvm.org/D37269
llvm-svn: 314431
Summary:
Lowering never creates X86ISD::UMUL for 8-bit types. X86ISD::UMUL8 is used instead. If X86ISD::UMUL 8-bit were ever used it would crash.
DAGCombiner replaces UMUL_LOHI/SMUL_LOHI with a wider MUL and a shift if the type twice as wide is legal. So we should never see i8 UMUL_LOHI/SMUL_LOHI. In fact I think there was a bug in part of the i8 code. Similar is true for i16 though without the bug.
Reviewers: RKSimon, spatel, zvi
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38276
llvm-svn: 314430
Previously we were using one of the subvector indices twice. The included test case causes an assert without this change.
Thanks to Simon Pilgrim for catching this.
llvm-svn: 314429
The SystemZ compare-and-swap instructions already provide the "success"
indication via a condition-code value, so the default expansion of those
operations generates an unnecessary extra comparsion.
llvm-svn: 314428
This patch adds a check to the DWARF verifier to detect CUs without a
unit DIE.
Differential revision: https://reviews.llvm.org/D38363
llvm-svn: 314426
This patch disables codegen support for branch likely instructions to
address a potential bug. These branches were unselectable as
they had the same patterns as the normal branches but came after them
when ISel was concerned.
The branch likely instructions were marked as having no delay
slots when they have annulling delay slots. The delay slot filler
does not currently handle annulling delay slot branches, so this
would lead to wrong codegen if these branches were generated.
Reviewers: atanasyan, nitesh.jain
Differential Revision: https://reviews.llvm.org/D38169
llvm-svn: 314421
Summary:
Add a document which describes:
- GEMM performance comparison.
- An experiment that measures the compile time impact
of enabling Polly when compiling LLVM+Clang+Polly.
Contributed-by: Theodoros Theodoridis<theodoros.theodoridis@inf.ethz.ch>
Differential Revision: https://reviews.llvm.org/D38330
llvm-svn: 314419
dlclose itself might touch it, so better return it to the state it was
before. I don't know how to create a test for this as it would require
chaning dlclose itself.
llvm-svn: 314415
Summary:
A DBG_VALUE that is referring to a physical register is
valid up until the next def of the register, or the end
of the basic block that it belongs to.
LiveDebugVariables is computing live intervals (slot index
ranges) for DBG_VALUE instructions, before regalloc, in order
to be able to re-insert DBG_VALUE instructions again after
regalloc. When the DBG_VALUE is mapping a variable to a
physical register we do not need to compute the range. We
should simply re-insert the DBG_VALUE at the start position.
The problem that was found, resulting in this patch, was a
situation when the DBG_VALUE was the last real use of the
physical register. The computeIntervals/extendDef methods
extended the range to cover the whole basic block, even though
the physical register very well could be allocated to some
virtual register inside the basic block. So the extended
range could not be trusted.
This patch is a preparation for https://reviews.llvm.org/D38229,
where the goal is to insert DBG_VALUE after each new definition
of a variable, even if the virtual registers that the variable
was connected to has been coalesced into using the same physical
register (e.g. due to two address instructions). For more info
see https://bugs.llvm.org/show_bug.cgi?id=34545
Reviewers: aprantl, rnk, echristo
Reviewed By: aprantl
Subscribers: Ka-Ka, llvm-commits
Differential Revision: https://reviews.llvm.org/D38140
llvm-svn: 314414
The second argument for Allocator::Deallocate is the number of elements,
not the size of a single element. In asan mode specifying a large number
of elements poisoned random memory regions, leading to crashes
everywhere.
llvm-svn: 314413
Summary:
This allows sharing the lattice value code between LVI and SCCP (D36656).
It also adds a `satisfiesPredicate` function, used by D36656.
Reviewers: davide, sanjoy, efriedma
Reviewed By: sanjoy
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D37591
llvm-svn: 314411
MS allows the following size directives: float/double and long as synonymous to dword/qword and dword, respectively.
Differential Revision: https://reviews.llvm.org/D37190
llvm-svn: 314410
Before this change using any of the -name*= command line options with an output
directory would result in a single file (functions.txt/functions.html)
containing the coverage for those specific functions. Now you get the same
directory structure as when not using any -name*= options.
Differential Revision: https://reviews.llvm.org/D38280
llvm-svn: 314396
In order for debuggers to be able to call an inline method, it must have
been instantiated somewhere. The dump() methods are usually not used, so
add an instantiation in debug builds.
This allows to call .dump() on any isl++ object from the gcc/gdb and
Visual Studio debugger in debug builds with assertions enabled.
In optimized builds, even with assertions enabled, the dump() methods
are also inlined in GICHelper.cpp, so no externally visible symbols
will be available either.
Differential Revision: https://reviews.llvm.org/D38198
llvm-svn: 314395
It's currently quite difficult to test passes like branch relaxation, which
requires branches with large displacement to be generated. The .space assembler
directive makes it easy to create arbitrarily large basic blocks, but
getInlineAsmLength is not able to parse it and so the size of the block is not
correctly estimated. Other backends (AArch64, AMDGPU) introduce options just
for testing that artificially restrict the ranges of branch instructions (e.g.
aarch64-tbz-offset-bits). Although parsing a single form of the .space
directive feels inelegant, it does allow a more direct testing approach.
This patch adapts the .space parsing code from
Mips16InstrInfo::getInlineAsmLength and removes it now the extra functionality
is provided by the base implementation. I want to move this functionality to
the generic getInlineAsmLength as 1) I need the same for RISC-V, and 2) I feel
other backends will benefit from more direct testing of large branch
displacements.
Differential Revision: https://reviews.llvm.org/D37798
llvm-svn: 314393
The oldest versions of GCC we support (before 5) didn't support that
trait. is_trivial is stronger superset that clang::Token fulfills, so
just use that instead.
llvm-svn: 314391
This is a follow-on of D37211.
D37211 eliminates a compare instruction if two conditional branches can be made based on the one compare instruction, e.g.
if (a == 0) { ... }
else if (a < 0) { ... }
This patch extends this optimization to support partially redundant cases, which often happen in while loops.
For example, one compare instruction is moved from the loop body into the preheader by this optimization in the following example.
do {
if (a == 0) dummy1();
a = func(a);
} while (a > 0);
Differential Revision: https://reviews.llvm.org/D38236
llvm-svn: 314390
Erich Keane